Odisha State Police Housing And Welfare Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha State Police Housing And Welfare Corporation Limited - OPHWC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date8 Feb 2022
Closing Date22 Feb 2022
Tender Amount₹ 9,03,05,581
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_OSPHW_76015_1Bid Award Id
ViewTender No
39/OPHWC/2021-22Tender Authority
Odisha State Police Housing And Welfare Corporation Limited ViewPurchaser Address
-Website
http://http://www.ophwc.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
50000020
"12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curring etc. All complete at all depth and height. for out side portion wall. "
(Ground Floor)
37.5
-
134.49
50000021
"6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smmoth including closed deep chiping and slurry treatment with necessary scaffolding,curring etc. All complete at all depth and height.for inside and out side portion. "
(Ground Floor)
40.88
-
150.76
50000035
"providing & fixing ceramic tiles of approved size in dado & skirting over cement plaster 1:3, 12mm thick jointed with with neat white cement slurry including cost of all material labour T & P etc.complete. "
(Ground Floor)
213.99
-
726.02
First Floor
101.22
-
740.6
50000044
"Providing anti-termite treatment including labour and materials etc complete. "
(Ground Floor)
1537.25
-
35
50000063
" One coat of priming with approved primer over new wood work. "
(Ground Floor)
658.13
-
57.72
50000495
"Fly Ash brick masonary in cement mortar 1:4 (1 cement :4sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75 kg per sqcm with dimentional tolerance +/-8% including watering, curing and cost, coveyance, royalty of all materials and cost of labour etc complete. In Superstructure. "
(Ground Floor)
9.38
-
4288.58
50000532
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, t7P etc. required for the complete in all respect.
(Ground Floor)
1017.46
-
285.81
50000884
"Enamel painting two coats including cost of all materials cleaning,brushes,putty etc. "
(Ground Floor)
658.13
-
133.42
50000964
Fixing of Granite Flooring in floors, Treads ()(&()) Landings on 25mm thick bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the Granite including rubbing and polishing complete etc.
(Ground Floor)
472.42
-
1792.13
First Floor
189.15
-
1813.04
50001705
Providing , Fitting & Fixing Anti-Skid Ceramic Floor Tiles in flooring using special plain / printed series Anti-Skid Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 300 m.m x 300 m.m OR 400 m.m x400 m.m) confirming to I.S 13755 of approved quality and shade in floors, treads on steps and landings in all floors at all height on 25 m.m thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened & washed sharp river sand for mortar and grouted with neat white cement slurry, joining the Anti-Skid Ceramic FloorTiles with neat white cement slurry,mixed with required (Tiles are to be immersed in the water for required time before use) quantities of pigments of approved marks to match the shades of the Anti-Skid Ceramic FloorTiles if required including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T &P required for the work , Watering , Curing for required days , cleaning the flooring space manually etc. complete in all respect as directed by the Engineer-in-charge.
(Ground Floor)
71.24
-
1014.3
First Floor
47.84
-
1035.21
50003018
Supplying & providing texture painting over outside area.
(Ground Floor)
2875.82
-
498.26
50004130
Providing and applying Xypex or equivalent crystalline product/Concentrate , as waterproofing coating & durability enhancement by crystallization to be supported by at least two national / international test reports showing clear scanning electron microscopic (SEM) photographs of dansified and mature crystals formation to plug all the capillary tracks and pores of the concrete permanently and permeability tested as per IS-2720 conducted by CBRI the concrete should not absorbed water more than 1.5 gms and not more than 1mm from the concrete surface. The product to be listed in ICC-ES evaluation report index January 2009, 2010 and 2011. The treatment to be carried out on the cleaned concrete surface as per manufacturer’s specification/data sheet. The application to be carried out with brush in one coat @0.80 Kg/Coat by using all safety equipments and necessary arrangements of scaffolding to reach the required heightcomplete in all respect excluding GST as per specification as directed by the Engineer-in-Charge.(N.S.W.I)
(Ground Floor)
170.12
-
732
First Floor
57.84
-
732
50004137
Providing edge moulding to 20 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. including cost of all labour, T & P, sundries etc. required for the work complete in all respect excluding GST as directed by the Engineer-in-Charge. (N.S.W.I)
(Ground Floor)
507.8
-
222
First Floor
206.4
-
222
50004144
"Supply and fixing STRAIGHT / curved sheets as required "SELF SUPPORTED" SECRET FIX STANDING ROOFING SYSTEM IN 0.9 mm THICK AA 3004 ALUMINIUM ALLOY. The general roof-construction shall comprise from bottom to top: 1.First Layer - Steel Deck liner – Solid 28- 35 /200 Galvanised steel deck liner (GSM 275) 550 MPa, 0.5 mm TCT 1000 -1050 mm total cover width28- 35mm deep ribs spanning up to 1300 mm centres (multiple spans). The finish to the exposed surface of the liner will be polyester coating with film thickness of 23µm +/- 2 µm. only. Where false ceiling is not provided the Liner shall be perforated and the Liner thickness will be 0.7mm The perforation shall be 23% with non-woven acoustic paper to enhance acoustic properties . 2. Second Layer - Vapour Control Layer –– – A single layer VCL, Polyethylene based vapor control membrane, reinforced with mono filament scrim to provide tensile strength. VCL weight 250 GSM, with Water Vapor permeability less than 0.39 grams / m2/ day. 3. Third Layer - Insulation – One layer of Rockwool insulation of 125 mm thickness , in 75 and 50 mm each minimum 60 kg/m³ density with thermal conductivity of K=0.038 W/mk at 20 degrees Celsius when tested to ASTM C518. Make Rockwool India / Roxul Make . The build up system shall achieve a U value of 0.36 W/ m2 K, considering Thermal losses through clips . 4 . Fourth Layer - ST Clip – Aluminium clips ST clips – in grade 6061, of suitable height with thermal barrier pads to be fixed to the sub purlins with SS 304 screws Sub girt Top Hat and top hat bracket as required -1.6 mm thick and 2mm thick Galvanised steel hat section to support for curved roofs 5.Fifth Layer - Top layer – Aluminium 65/400 Straight / curved profile sheeting manufactured from aluminium self supported standing seam roof system from aluminium alloy AA 3004 H46 (AlMn1Mg1) as specified in BS EN 1396: 2007 minimum material thickness of 0.9mm and PVDF2 finish ( standard colours ) with on the exposed surface. PVDF2 finish coated from approved paint suppliers PPG/BECKER / AKZONOBEL / VALSPAR . The external PVDF2 coating shall be of 23-25 microns thickness and shall have protective guard film of 75micron to prevent scratches during roll forming & handling Accessories Including ridge gable and eaves, Fasteners The material properties shall be as follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Sheets are to be laid to meet the requirements of the building geometry and fixed on Aluminum clips. Clip to be fixed to the purlins with SS 304 screws, with a minimum dia of 5.5 mm Certificates - The roofing system shall be certified with a 1- British Board of Agreement Certificate 2- the Institute of Bautechnic Zulassungbeschield N R -14.1 .181 All installation is to be carried out by approved trained roofing installer. 3- FM certificate in India and the roofing system should have passed FM test of Class 1- 105 Performance parameters . 1- Wind Load to be considered as per IS 875 – Part 3 2- Acoustics – STC test to achieve 39 dB, with a negative tolerance of -2dB 3- U value – 0.36 W/m2 K considering thermal bridging losses _Purlin spacing to be as the wind load requirement and 1300 mm The installation team shall be fully trained and approved by the manufacturer, and Approved Installers and shall provide the letter from manufacturer "(N.S.W.I)
(Ground Floor)
877.5
-
5871
50004151
Flashings manufactured from aluminium alloy AA 3004 (AlMn1Mg1) as specified in BS EN 1396: 2007 minimum material thickness of 0.9 mm and Fluorocarbon PVDF finish on the exposed surface. The material shall be of the same colour. including all formations as per the directions of Engineer In Charge.(N.S.W.I)
(Ground Floor)
87.75
-
2962
50004158
Providing & fixing Wind Tie for Metal Truss at 15mtr Height .( .5 Kg / M² ) Including cost, conveyances, loading unloading , labour, T &P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engine er-in-charge.(N.S.W.I)
(Ground Floor)
438.75
-
167
50004179
Providing Hilti hold fast of 150 mm length ,10 mm dia including fixing to frame with 10 mm diameter bolts, nuts and as directed by Engineer -In-Charge including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T&P required for the work complete in all respect excluding GST.(N.S.W.I)
(Ground Floor)
312
-
57.8
50004186
Providing and fixing Bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for door, with necessary screws etc. complete in all respect excluding GST as directed by Engineer-in-charge. (Make Godrej )Daina - 8170.
(Ground Floor)
52
-
1901.9
50004193
Providing and fixing Aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :and as directed by Engineer -in-charge.including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T&P required for the work complete in all respect excluding GST as directed by Engineer-in-charge.(N.S.W.I)
(Ground Floor)
52
-
169
50004200
Providing and fixing aluminium extruded section body tubular type universal Hydraulic door closer (having brand logo with ISI, IS : 3564, with double speed adjustment with necessary accessories and screws etc. required for the work including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T &P required for the work complete in all respect excluding GST as directed by Engineer-in-charge. Godrej Door Closer 80-120kgs ,Product code-5750, UNSPSC Code30171514SD00170.(N.S.W.I)
(Ground Floor)
52
-
3901.7
50004214
Providing and fixing factory made UPVC white colour (Veka/Wintech/Plasopan/equivalent)sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (including 5 mm thick plain Glass) Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) complete excluding GST.(N.S.W.I)
(Ground Floor)
19.8
-
6337
First Floor
9
-
6337
50004496
Providing & Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units be of approved colour using high quality pigments complete in all respect as per specification and as per the direction of Engineer-in-Charge.(Century) [NSWI]
(Ground Floor)
289.6
-
1868.39
50004506
Providing & Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250x10), 1 No SS Aldrop (400 X 300), 4 Nos. SS Butt Hinges (125x8.5x5.5), Backside Buffer with all necessary fittings Complete with approved colour as per the direction of Engineer-in-Charge. (Century) [NSWI]
(Ground Floor)
97.6
-
8045.28
50004526
Supplying, Fitting & Fixing of 10 mm thick Digital Glazed Vitrified Tile/Double charged full body vitrified tile in floor of size 600mm x 600mm of approved shade laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T & P etc required for the works all complete as per direction of Engineer-in-Charge. (For new work only) (SOMANY/ KAJURIA/ NITCO / RAK/VARMORA) [NSWI]
(Ground Floor)
498.68
-
1387.34
First Floor
355.1
-
1408.25
IPH
-
-
-
10000002
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. For 20mm nominal outer dia pipes
(Ground Floor)
40
-
223.48
10000004
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. For 25mm nominal outer dia pipes
(Ground Floor)
35
-
300.63
10000006
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. For 40mm nominal outer dia pipes
(Ground Floor)
160
-
584.65
10000008
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. For 50mm nominal outer dia pipes
(Ground Floor)
100
-
896.78
10000010
Cutting holes through existing brick work including making good the same in cement mortar (1:4) fro taking GI/PVC pipes and fittings etc all complete as per specification. {with 1:4 brick work in cement motar[Excluding contractors profit & Over head charges] 10x0.12x0.25 and 12mm thick cement plaster (1:4) [Excluding CP & OHC] 10x0.12x0.25} FOR 250mm THICK WALL
(Ground Floor)
44
-
43.35
10000012
Cutting holes through existing brick work including making good the same in cement mortar (1:4) fro taking GI/PVC pipes and fittings etc all complete as per specification. {with 1:4 brick work in cement motar[Excluding contractors profit & Over head charges] 10x0.12x0.25 and 12mm thick cement plaster (1:4) [Excluding CP & OHC] 10x0.12x0.25} For 375mm thick wall
(Ground Floor)
16
-
65.03
10000016
Cutting hole in R.C.C floor and roofs upto 19cm thick for passing G.I/P.V.C pipes and fittings etc and reparing the hole after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm
(Ground Floor)
6
-
151.71
10000018
Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. With Cement concrete (1:3:6)with metal [Excluding CP & OHC] and 12mm cement plaster (1:3) [Excluding CP & OHC] along with Cement punning [Excluding CP & OHC]
(Ground Floor)
50
-
149.02
10000033
Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.
(Ground Floor)
4
-
215.51
10000180
Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to JAQUAR MAKE of brand code(CNS-WHT-755SS and CNS-WHT-207) including automatic flushing systern of viteros china make and seat cover fixing to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.(Bowl for couple closet -WC with soft closing seat cover size:360x680x775,Strap-220mm,cistern with cistern fittings for 755 SS).
(Ground Floor)
25
-
8092.98
10000186
Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 / JAQUAR MAKE with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801) with(CNS-WHT-301 FULL PEDESTAL) (JAQUAR MAKE).
(Ground Floor)
21
-
4663.08
10000190
Fixing Of Standing urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.(White vitreous china clay half stall urinal flat back 355X345X535 mm (BRAND CODE URS-WHT-13261) JAQUAR MAKE).
(Ground Floor)
8
-
3973.38
10000194
Fixing of Screw-down TWO WAY Bib Cocks (Taps) polished bright conforming to (JAQUAR MAKE) with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Head & high quality),(15mm diameter Two way short body bib cock (CODE CON-041KN).
(Ground Floor)
25
-
1111.8
10000198
Fixing of Screw-down SHORT BODY Bib Cocks (Taps) polished bright conforming to (JAQUAR MAKE) with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Head & high quality)(15mm diameter short body bib cock(CODE CON-037KN).
(Ground Floor)
5
-
843.79
10000200
Fixing of Screw-down SINK Cocks (Taps) polished bright conforming to (JAQUAR MAKE) with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Head& high quality),(15mm diameter Sink Cock (CODE CON-347KN).
(Ground Floor)
2
-
1355.44
10000202
Fixing of Screw-down ANGLE Stop Cocks conforming to CON-053KN (JAQUAR MAKE) of the following nominal sizes as per specification complete. (Deluxe Head& high quality),(15mm diameter angle stop cock).
(Ground Floor)
50
-
834.54
10000212
Fitting,Fixing of Health faucet conforming to(Hand Shower (Health faucet) ABS Body with 8mm Dia 1.2 Meter Long Flexible Tube & Wall Hook, ALD-CHR-593-N),( JAQUAR MAKE) including all complete as per specification.(Chrome Finish)
(Ground Floor)
25
-
1279.4
10000216
Fixing Chromium Plated soap dish Holder complete with Chromium Plated brass brackets fixed to P.V.C plugs with Chromium Plated brass screws as per specification.(JAQUAR MAKE,BRAND ACN-1131N).
(Ground Floor)
33
-
660.76
10000224
Fixing standard sized towel ring of JAQUAR MAKE complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.(Towel Ring Round With Round Flange (BRAND CODE ACN-1121BN).
(Ground Floor)
33
-
838.79
10000226
Fixing SWIVEL mirror of JAQUAR MAKE superior glass with chromium plated brass screws and washers complete as per specification.(SWIVEL MIRROR) (ACN 1195N, JAQUAR Make)
(Ground Floor)
126
-
2609.52
10000230
Fixing standard size Chromium Plated Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per spec ification.(Toilet Roller Holder ACN-1151N,JAQUAR Make).with all fittings.
(Ground Floor)
25
-
709.68
10000292
Laying in trenches OD PVC pipes and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. 160mm dia OD P.V.C SWR double socket pipes (ISI TYPE-A),Analysis is done as per AR-2013,SLNO-2.3.2 .
(Ground Floor)
185
-
668.1
10000294
Laying in trenches OD PVC pipes and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. 110mm dia OD P.V.C SWR double socket pipes (ISI TYPE-A),Analysis is done as per AR-2013,SL NO-2.3.2 .
(Ground Floor)
245
-
342.94
10000298
Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion .110MM DIA PLAIN BEND P.V.C SWR TYPE
(Ground Floor)
50
-
166.02
10000300
Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion .110mm dia bend with door P.V.C SWR TYPE
(Ground Floor)
6
-
199.04
10000304
Fixing 110mm size ‘P’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification.110 MM DIA P.V.C SWR P-TRAP
(Ground Floor)
25
-
306.72
10000308
Fixing floor traps of the following nominal diameter of outlet of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification.110mm dia GULLY Trap P.V.C SWR TYPE
(Ground Floor)
10
-
482.77
10000312
Providing and fixing on wall face PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion.110 mm dia cowel P.V.C SWR TYPE.
(Ground Floor)
5
-
53.53
10000330
Fixing glazed earthenware squatting plate of size 600mm x 355mm conforming to IS:2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cementmortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal .Porcelin Squating urinal (600X355 mm) size all complete as per specification & direction of the E.I.C.
(Ground Floor)
8
-
2476.45
10000332
Providing and fixing Stainless Steel kitchen sink with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.24"X18"X10" STEEL sink single bowl (parry ware) as per the direction of the E.I.C.
(Ground Floor)
2
-
6518.03
10000338
Fixing of U.P.V.C Ball Valve of 50mm diameter conforming to the following nominal sizes with wheel as per specification complete .(S olvent Welded With Metal Ball) As per the direction of the E.I.C .
(Ground Floor)
8
-
2413.32
10000340
Fixing of U.P.V.C Ball Valve of 40mm diameter conforming to the following nominal sizes with wheel as per specification complete .(S olvent Welded With Metal Ball) As per the direction of the E.I.C .
(Ground Floor)
15
-
1475.01
10000342
Fixing of U.P.V.C Ball Valve of 25mm diameter conforming to the following nominal sizes with wheel as per specification complete .(S olvent Welded With Metal Ball) As per the direction of the E.I.C .
(Ground Floor)
15
-
553.48
10000344
Fixing of U.P.V.C Ball Valve of 20mm diameter conforming to the following nominal sizes with wheel as per specification complete .(S olvent Welded With Metal Ball) As per the direction of the E.I.C .
(Ground Floor)
5
-
404.28
10000380
Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the E.I.C .2 Layer Cylinderical Vertical water storage tanks (Details of cost for one Tank On the roof of ground floor)
(Ground Floor)
4000
-
10.63
10000390
Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion . AR.-2013,SL.-NO-3.3.3.VI .110X110X110 MM DIA P.V.C S.W.R TEE
(Ground Floor)
6
-
215.9
10000606
Supplying, Fitting & Fixing of Ladies/Female Urinal Partition with all complete, Ready to use or Ready made by approved brands of Jaquar, Parryware, Cera, Hindware etc as per the instruction of EIC.
(Ground Floor)
16
-
1106
10000660
Supplying Fitting and Fixing of Urinal valve Auto Closing System with bulit-in Control Cock & wall flange (Model No-SNR-CHR-51 097).(N.S.W.I)
(Ground Floor)
8
-
8594.4
10000662
Supplying Fitting and Fixing of 32mm CP bootle trap(Model No-ALD769L250X190).(N.S.W.I)
(Ground Floor)
29
-
1655.9
10000664
Supplying Fitting and Fixing of CP Double Coat Hook (Model no-ACN1161N).(N.S.W.I)
(Ground Floor)
25
-
495.3
10000666
Supplying Fitting and Fixing of Grab bar for PH toilets (Model No-WAC-SAP=BG0800CS).(N.S.W.I)
(Ground Floor)
4
-
17512.8
10000668
Supplying Fitting and Fixing of 15mm dia steel braided connection pipe.(N.S.W.I)
(Ground Floor)
46
-
266
10000670
Providing all materials , labour ,T&P and fittings and fixing of Following Size on Extension piece (S.S/CP on Brass) approved make of following sizes and specification with leak proof threaded joints with spun yarn and white zinc or any other method as required including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge. 15mmx25mm C.P./S.S Extension piece.(N.S.W.I)
(Ground Floor)
70
-
145
10000672
Providing all materials , labour ,T&P and fittings and fixing of Following Size on Extension piece (S.S/CP on Brass) approved make of following sizes and specification with leak proof threaded joints with spun yarn and white zinc or any other method as required including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge. 15mmx40mm C.P./S.S Extension piece
(Ground Floor)
50
-
173
10000674
Providing all materials , labour ,T&P and fittings and fixing of Following Size on Extension piece (S.S/CP on Brass) approved make of following sizes and specification with leak proof threaded joints with spun yarn and white zinc or any other method as required including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge. 15mmx65mm C.P./S.S Extension piece.(N.S.W.I)
(Ground Floor)
20
-
257
10000676
Providing all materials, labour & fitting and fixing 150x150mm size dia Stainless steel Cockroach floor Trap on top of floor traps with cement mortar (1:4) with all taxes, duties etc. all complete as per specification & direction of Engineer-in-charge. 125x125mm Cockroach Trap.(N.S.W.I)
(Ground Floor)
35
-
1485
10000678
Providing all materials, labour, T&P, fitting and fixing of following dia UPVC SWR(Type-A) fittings of approved make confirming to IS 14735/1992 with ISI mark both below & above ground level or fixing on wall surface upto 2nd floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/SUPREME PVC clamp suitable for 110mm dia pipe.
(Ground Floor)
50
-
93.2
10000680
Providing all materials, labour, T&P, fitting and fixing of following dia UPVC SWR(Type-A) fittings of approved make confirming to IS 14735/1992 with ISI mark both below & above ground level or fixing on wall surface upto 2nd floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/SUPREME 110 mm End cap
(Ground Floor)
5
-
200.8
10000682
Providing all materials, labour, T&P, fitting and fixing of following dia UPVC SWR(Type-A) fittings of approved make confirming to IS 14735/1992 with ISI mark both below & above ground level or fixing on wall surface upto 2nd floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/SUPREME 160 mm end cap
(Ground Floor)
3
-
469.9
MIS-FURNISHING IT
-
-
-
50000023
"Priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc.complete. "
(Ground Floor)
1681.26
-
58.32
First Floor
512.68
-
60.73
50000025
"Wall painting two coats with plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. "
(Ground Floor)
1681.26
-
75.5
First Floor
512.68
-
77.06
50000034
"Supplying ,fitting and fixing of M.S. grill,M.S levoured ventiletors including cost of labour,material,transportation etc. "
(Ground Floor)
494.42
-
76.34
50000041
" Finishing surface of walls with cement based wall Putty (water based) of approved make finished smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials, taxes, labour & T&P etc complete. "
(Ground Floor)
1681.26
-
71.55
First Floor
512.68
-
72.87
50002532
Providing,fitting & fixing of false celling with aluminium anodised T section no.3215 with 2'0" C/C ,L-section no.1705 up to 15 micron on 4 walls to be fixed by mesans of steel screw and P.V.C plug and the aluminium grid 2'0"X2'0" with 12 mm gypsum suspended from ceeling etc.as per the direction of EIC including cost of Gypsum board ,with all labours & materials etc all complete.
(Ground Floor)
743.43
-
765.04
50002868
Supplying, Fitting and Fixing of Toughened Glass Door including cost of all material labour T&P etc, as per the instruction of EIC.
(Ground Floor)
26.35
-
9310
50004221
Side & Rear Wall Paneling Specification (Lower Reaches) Supply & installation of Anutone Salon Slats Surco made of pinewood E1 grade fiberboard, melamine laminated finish, groove perforated slats L16-2 - (2mm Slats @16mm pitch) / L32-2 - (2mm grooves @ 32mm centers), backlined with Soundtexblack acoustical fleece, tongue-groove edge for a seamless look, 5-test fire retardant grade, size 128x2440x16mm, volume density of base board 800Kg/m3, weight 8Kgs/m2 (L16), 10.5Kgs/m2 (L32) installed by using Anutone Strut framework system. Anutone Strut framework system includes Anutone Strut CC22aluminium core cross channel having thickness 0.55mm, length 3600mm, knurled web 40mm, depth 22mm and equal flanges 15mm is fastened to wall or framework behind vertically/horizontally at every 600mm c/c. Anutone Strut CC18 aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge ¢re brackets is then fixed perpendicular to the Strut CC22 Cross channel with the help of fasteners at every 400mm centers. Slats Surco of size 128x 2440x16mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Short edges of the panel are staggered. Contractor to provide expansion joints of 3mm at every 4.88m length wise and 4.992m width wise. Panels are backlined with Anutone SynthPF 5x25 held in position with dab spots of Anutone Stick S7. Technical Parameters : • Fire (Class) – 1 & P (For FR grade)• Acoustics – NRC 0.77 (For E300* Mounting)• Thermal conductivity (W/mk)– na• Climate (°C, RH) – 50, 70• Light reflectance (%) – 75 (Maple Arce)• Green (VOC, RC %) – Low, 25.(N.S.W.I)
(Ground Floor)
374
-
9273
50004228
"Side Wall Paneling Specification (Upper Reaches)Supply and installation of Anutone Stretch NRC system consisting of FR Grade NRC fabric with high-performance integrated core and acoustically-transparent face covering of choice colour, size 1.7mx75m, stretched by using combination of Anutone Strut CC10 Cross Channel and Anutone Strut FS15 Tracks, Anutone Strand, 10mm wooden base, Anutone SynthPF 5x10 infill with requisite accessories. The Anutone Strut system includes Anutone Strut CC22 Cross Channel, fully knurled, sectional thickness 0.55mm, length 3600mm, web 30, depth 22mm and equal flanges of 15mm is fastened to the wall @ 600mm centers. Wooden base 10mm is then installed on the CC22 along the marking lines with metal fasteners at 300mm centers. FS15 tracks to be installed on wooden base, by first applying Stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Anutone Strut Tracks. Strand square edge magnesite bonded pinewood fiber panels of size 600x1200x15mm having density 400kg/m3, weight 6kg which is fixed to Strut CC22 Cross Channel inbetween tracks. Long edge of panels should be perpendicular to length of Strut CC22 Cross Channel. SynthPF 5x10mm adhered on Strand by using Stick 7 adhesive. The Anutone Stretch NRC acoustical fabric of width 1.7m is stretched and tucked into the Anutone Strut Tracks and secured to the locking jaws with purpose-specific tucking tools to obtain smooth, taut, wrinkle-free finish. Ensure the weft and weave of the fabric along with the surface are all oriented in one direction to achieve uniform shade. N ote: Minimum 100mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600mm. Technical Parameters of fabric : • Fire (Class) – 1, • Acoustics – na, • Thermal conductivity (W/mk)– NA, • Climate (°C, RH) – 50, 90 Technical Par ameters of Strand • Fire (Class) – 1 & P • Acoustics – NRC 0.97 (For 40mm C50 Mounting) • Thermal conductivity (W/mk)– 0.07 • Climate (°C, RH) – 50, 95 • Light reflectance (%) – 80 • Green (VoC, RC %) – Low, 30 (N.S.W.I) "
(Ground Floor)
564
-
5974
50004236
Anutone Subtex Nubby 595x595x15mm, Square edge (T15 Grid system)Supply and Installation of Anutone Subtex Nubby,square edge, Glassfibre core fully encapsulated ceiling tile of size 595x595x15mm having volume density 120Kgs/m3, weight 1.8kg/m2 which is suspended by using 0.3mm thick Anutone Skelet TrelisT15 metal grid system. Anutone Skelet TrelisT15 metal grid system of 600x600mm module includes Anutone Skelet WA15W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT15W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Anutone Skelet CT15W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x600mm module. Anutone Subtex Nubby square edge of size 595x595x15mm shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. Anutone Skelet TrelisT15 metal grid system of 600x600mm module includes Anutone Skelet WA15W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT15W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Anutone Skelet CT15W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x600mm module. Anutone Subtex Nubby square edge of size 595x595x15mm shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. Technical Parameters : • Fire (Class) – 1 & P • Acoustics – NRC 0.9 (For E900 Mounting)• Thermal conductivity (W/mk)– 0.066• Climate (°C, RH) – 40, 95• Light reflectance (%) – 85• Green (VoC, RC %) – Low, 35 (N.S.W.I)
(Ground Floor)
880
-
3300
50004238
Auditorium Hall Perimeter Ceiling : Supply and Installation of Anutone Tufbloc Square edge Magnesia core panels of size 1200x2400x8mM having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel (CC10) having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel (CC10) with suitable fasteners leaving 4mm gap on all sides. Anutone Seam Kit is used to fill the gaps as per given recommendations. Technical Parameters : • Core - Magnesia • Fire – 1&P • Climate (OC RH) – 50,90 • Termite resistance – Yes • Light reflectance – 85 % • Green (RC %) – 30 • Hygiene (VoC, Clean room) – Low, Class 1 • Strength, Load capacity (Kg) - Antisag, Ball-Impact .
(Ground Floor)
245
-
3294
50004250
Supply and installation of Rockwool having density of 48Kg/m3, with thickness of 48mm, aluminium foil backing to be installed with the help of GI Wire just beneth the Roofing sheet as per direction of engineer in charge.(N.S.W.I)
(Ground Floor)
1368.75
-
2196
50004257
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. (N.S.W.I)
(Ground Floor)
119.08
-
2236
50004264
Supply & Fixing Homogeneous & abrasion resistant Vinyl flooring 2mm thick of desired shade & in desired patterns, in auditorium floor including removal of old flooring material if any & cleaning of existing surface & using suitable adhesive to give smooth & even floor including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T &P, sundries required for the work etc, complete as per specification & direction of the Engineer-in-charge. (Make- 1. WONDERFLOOR / POLYFLOOR. )(N.S.W.I)
(Ground Floor)
833.29
-
1523
50004271
Supply, fitting & fixing in position Acoustic Door 70 mm thick, fabricated from 2.0mm thick steel sheet filled with sound absorbing and damping elements. Leaf shall be internally reinforced to accept hardware.Frame- Architectural split frame shall be fabricated from 2.0mm thick steel sheets, channels and plates and to be filled with sound absorbing and damping elements. Additional structural elements incorporated into the builders’ wall may be required to support the door assembly, please refer to IAC Acoustics for more information.Acoustic Seals - Side and head of door and frame shall each receive two sets of acoustic seals. An acoustic labyrinth shall be created when door is in closed position. Bottom of door leaf shall contain continuous gravity-activated seal which shall compress against steel threshold as door is closed.Pre-hung -Assembly and adjustment of door leaf, frame, acoustic seals and hinges shall take place at factory to ensure ease of installation, reliable operation and maintenance of acoustic performance. The entire doorset shall be shipped to job site ready to install and operate.Hinges -Shall be by IAC, CAM lift design, painted to match the door.Preparation- Door leaf and frame shall be predrilled and tapped in accordance with manufacturer’s templates to accept specified h ardware.Vision Panel (if applicable)- Double glazed window unit comprising two panes of laminated safety glass (Thickness dependant on vision panel size) sealed within 2mm steel frames to suit leaf thickness of 64mm. Acoustic absorptive material fitted between the panes. Steel frames to be RAL polyester powder coated to match the door finish.Colour / Finishes- Leaf and frame to be polyester powder coated to standard RAL colours.(N.S.W.I)
(Ground Floor)
55.39
-
32043.6
50004278
Providing & fixing steel Fire shutter with Fire Rating of 120 minutes rating as per manufacturers specifications and similar to the prototype tested by CBRI, Roorkee & certificate issued thereof (as per IS:3614 Part-2, 1992) with overall size as per site requirement. Door frame are made with 1.6mm thick Galvanized steel sheet pressed to Double rebate profile of size 150 X 65 mm. Door shutter are made with 1.25mm thick Galvanized steel sheet pressed formed to provide a 55mm thick fully flush double skin panel shall with lock seam joints at style edges and filled with ceramic wool (96 kg/cum density) Honey comb structure with reinforcement at top, bottom and stile surrounds. The items also include provision for required iron mongery and finished with zinc phosphate storing primer & Powder coated finish including cost and conveyance of all materials, cost of all labour, hire and running charges of machinaries, T&P etc. required for the work complete in all respect excluding GST as directed by Engineer-in-charge. ( Door with Frame & Shutter: 1500 x 2250 mm, Double Shutter Door HARDWARE DETAILS HINGES: SS Ball bearing Butt Hinges 4"x3"x3 mm - Garg DEAD LOCK: 1 Side key and other side thumb turn, 80mm cylinder - Dauerhaft D HANDLE: SS 304 Grade, 22mm dia, 300mm Long - Dauerhaft ) DOOR CLOSER: Surface mounted std arm - Dauerhaft VISON PANEL: 7.2mm thick 200x300mm wired glass-Saintgobin CO NCEALED FLUSH BOLT: 300 mm Long - Dauerhaft (N.S.W.I)
(Ground Floor)
8.78
-
32310.7
50004285
Providing and placing Auditorium Chair is also including cost conveyance loading unloading of materials placing in position cost of labour T&P excluding GST as per the direction of Engineer in charge . (N.S.W.I)
(Ground Floor)
858
-
8280
MIS-MANHOLE CHAMBE
-
-
-
50000003
"Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height. "
(Ground Floor)
3.02
-
4004.61
50000008
"Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. "
(Ground Floor)
3.99
-
4474.04
50000009
"Rigid and smooth centering and shuttering false, levelled works and dismentalling then after casting including cost of mterials complete for Plinth band & Column Footing. "
(Ground Floor)
10.03
-
103.22
50000017
"Supplying of filling sand in foundation and plinth including watering,ramming,consolidating and dressing,labours,tools, taxes etc., all complete as per the specification and direction of E.I.C. "
(Ground Floor)
3.02
-
385.74
50000022
"16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand)including necessary scaffolding curring etc. all complete at all depth and height. "
(Ground Floor)
31.21
-
192.46
50000039
"Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools and taxes etc. "
(Ground Floor)
2.45
-
8811.29
50000488
"Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth"
(Ground Floor)
6.51
-
4067.58
50001242
"Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying and layers not exceeding 0.3m. in depth. "
(Ground Floor)
27.22
-
139.1
50001719
12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.
(Ground Floor)
64.41
-
151.93
50004363
MANHOLE COVER SIZE 2'0"X2'0"
(Ground Floor)
12
-
1650
MIS-MANHOLE CHAMBE
-
-
-
50000003
"Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height. "
(Ground Floor)
3.28
-
4004.61
50000008
"Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. "
(Ground Floor)
4.35
-
4474.04
50000009
"Rigid and smooth centering and shuttering false, levelled works and dismentalling then after casting including cost of mterials complete for Plinth band & Column Footing. "
(Ground Floor)
10.87
-
103.22
50000017
"Supplying of filling sand in foundation and plinth including watering,ramming,consolidating and dressing,labours,tools, taxes etc., all complete as per the specification and direction of E.I.C. "
(Ground Floor)
3.28
-
385.74
50000022
"16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand)including necessary scaffolding curring etc. all complete at all depth and height. "
(Ground Floor)
33.82
-
192.46
50000039
"Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools and taxes etc. "
(Ground Floor)
2.65
-
8811.29
50000488
"Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth"
(Ground Floor)
9.41
-
4067.58
50001242
"Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying and layers not exceeding 0.3m. in depth. "
(Ground Floor)
39.31
-
139.1
50001719
12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.
(Ground Floor)
84.27
-
151.93
50004363
MANHOLE COVER SIZE 2'0"X2'0"
(Ground Floor)
13
-
1650
ELECTRICAL WIRING, PANELING 80 KVA UPS
-
-
-
Point wiring of light, using 1100 volt grade, 2 Runs of 1.5 sqmm multi strand FRLS insulated copper conductor wire along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire, drawn in 19/20mm dia, 2mm thick rigid FRLS PVC conduit in a concealed / open conduit system. The wiring shall be complete with all conduit and wiring accessories like deep junction boxes, collars, tees, bends, elbows, MS boxes, GI pull wires, clamps, spacers, screws, etc. The rate shall include providing mounting boxes with tapped holes for lights switches, moulded front plates with brass screws earthing of all points using third core of the cable, DB to switch control will be measured as circuit wiring. The switch boxes shall be flush mounted in brick wall. The point wiring shall be as per specification.
-
-
-
Single Light point controlled by 6 A Modular type switch (Make-switch-Legrand/ Wipro/ Anchor/ havells/ Panasonic)
275
-
958.54
Two light points controlled by 6 A Modular type switch (Make-switch-Legrand/ Wipro/ Anchor/ havells/ Panasonic)
275
-
1578.4
Three light points controlled by 6 A Modular type switch(Make-switch-Legrand/ Wipro/ Anchor/ havells/ Panasonic)
110
-
2098.06
6A 3 pin receptacle located on wall or column controlled by modular type switch for exhaust fan (switch & receptacle located separately)(Make-switch-Legrand/ Wipro/ Anchor/ havells/ Panasonic)
44
-
958.54
Ceiling fan point controlled by 6A switch. The rate shall include fan hook box, Electronic fan regulator, & other accessories as required.(1200 DIA)(Make-switch-Legrand/ Wipro/ Anchor/ havells/ Panasonic)
11
-
1297.31
Two way light point (one light controlled by 2 nos. two way switch)(Make-switch-Legrand/ Wipro/ Anchor/ havells/ Panasonic)
17
-
1660.46
Circuit Mains and Power Wiring :
-
-
-
Supply and laying of 1100V grade, multi strand FRLS insulated copper conductor wire. drawn into 2 mm thick rigid FRLS PVC conduit pipes in concealed / open conduit system with necessary conduit and fixing accessories like bends, collars, junction boxes, clamps, spacers, etc., complete. Wiring shall be as per specifications.
-
-
-
2 Runs of 2.5 sqmm multi strand FRLS insulated copper conductor wire in 25 mm dia FRLS PVC conduit along with 1 Run of 2.5 sq.mm multi strand FRLS insulated copper earth wire. (For Lighting)(Make of wire Finolex / L &T / Anchor / Havels/ V guard)
2065
-
140.02
2 Runs of 4.0 sqmm multi strand FRLS insulated copper conductor wire in 25 mm dia FRLS PVC conduit along with 1 Run of 4 sq.mm multi strand FRLS insulated copper earth wire. (For Raw power)(Make of wire Finolex / L &T / Anchor / Havels/ V guard)
1815
-
157.2
Lift well lighting
-
-
-
PVC pipes
-
-
-
Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.( Sudhakar / AKG / BEC/ANCHOR)
-
-
-
32 mm dia conduit
1980
-
107.41
25 mm dia conduit
1760
-
98.5
Switches / Sockets Legrand/ Wipro/ Anchor/ havells/ Panasonic)
-
-
-
LIGHT FIXTURES & FANS
-
-
-
Surface / wall / ceiling mounted light fixtures
-
-
-
Supply Installation, testing and commissioning of the following lighting luminaires including all necessary accessories like electronic driver, holder, control gear, fixing accessories, down rod, chain suspender, supporting arrangements, clamps, as per the site requirments(.Phillips / WIPRO)
-
-
-
Supply , installation testing and commissioning of 24Watts LED Downlight recessed mounted type light fitting with all accessories
80
-
2972.75
Supply , installation testing and commissioning of 18Watts LED Downlight recessed mounted type light fitting with all accessories
490
-
1926.25
Supply , installation testing and commissioning of 10Watts Mirror LED wall mounted type light fitting with all accessories as required
21
-
557.75
Supply , installation testing and commissioning of 10Watts wall mounted type light fitting with all accessories as required
50
-
557.75
Supply , installation,Testing & Commissioning of ceiling / surface mounted type 20Watts LED Tube light fitting with all accessoriesas required
20
-
609.5
Supply , installation testing and commissioning of 30Watts LED Downlight recessed mounted type light fitting with all accessories Seminor Stage Area.
6
-
4301
Supply , installation testing and commissioning of 20Watts LED Downlight recessed mounted type light fitting with all accessories Seating Area-2
30
-
2892.25
Supply , installation testing and commissioning of 90Watts LED Downlight recessed mounted type light fitting with all accessories Seating Area-1
30
-
14403.75
Supply , installation testing and commissioning of 150Watts LED Downlight fitting mounted on Truss with supprot and all accessories.Audi Stage Area
10
-
21326.75
Supply, installation of 10Watts LED bulk head light fitting
10
-
1035
Supply and fixing of 120Watts outdoor type LED Flood light fitting with supports and all accessories as required
2
-
8083.35
Supply, Erection, testing and commissioning of 1200mm sweep Ceiling fan with all accessories as required[MAKE- USHA/ CROMPTON/HAVELLS/ANCHOR-PANASONIC)
21
-
1874.17
Supply, Erection, testing and commissioning of 300mm Metal type Exhaust fan with all accessories as required[MAKE- USHA/ CROMPTON/HAVELLS/ANCHOR-PANASONIC)
21
-
2024
Supply , installation testing and commissioning of LED Step Light fitting with all accessories.Entry Area Pergola Fixtures(Make- CROMPTON/ PHILIPS/ WIPRO/JAQUAR/HAVELLS/PANASONIC)
20
-
2149.15
LT CABLES & END TERMINATIONS
-
-
-
Supply, laying , testing and commissioning of the following size XLPE insulated (1100V grade) aluminium / copper conductor armoured cable laid in cable tray / clamping in wall/ laid in the cable trench with suitable dressing tags and clamps. (FINOLEX/HAVELLS/POLYCAB/KEI)
-
-
-
3.5C 240 Sq.mm XLPE aluminium armoured Cable
66
-
831.42
3.5C 185 Sq.mm XLPE aluminium armoured Cable
44
-
676.47
3.5C 150 Sq.mm XLPE aluminium armoured Cable
6
-
541.17
3.5C 120 Sq.mm XLPE aluminium armoured Cable
165
-
450.19
3.5C 95 Sq.mm XLPE aluminium armoured Cable
121
-
361.31
3.5C 70 Sq.mm XLPE aluminium armoured Cable
22
-
292.61
3.5C 50 Sq.mm XLPE aluminium armoured Cable
28
-
218.67
3.5C 35 Sq.mm XLPE aluminium armoured Cable
28
-
169.12
4 Core 25 Sq.mm XLPE aluminium armoured Cable
415
-
147.75
4 Core 16 Sq.mm XLPE aluminium armoured Cable
320
-
110.65
4 Core 10 Sq.mm XLPE aluminium armoured Cable
28
-
98.32
4 Core 6 Sq.mm PVC Copper armoured Cable
165
-
246.07
4 Core 4 Sq.mm PVC Copper armoured Cable
495
-
173.31
4 Core 2.5 Sq.mm PVC Copper armoured Cable
275
-
121.53
3 Core 4.0 Sq.mm PVC Copper Armoured Cable
305
-
138.57
3 Core 2.5 Sq.mm PVC Copper Armoured Cable
215
-
99.9
24 Core 2.5 Sq.mm PVC Copper Armoured Cable
22
-
591.51
1Core 16 Sq.mm XLPE Copper Flexible Cable for UPS
154
-
130.18
1Core 6 Sq.mm XLPE Copper Flexible Cable for UPS
132
-
51
Supply and fixing of end termination of the following size cables with suitable Double compression glands and suitable size crimping sockets, gland earthing by using 12/14SWG copper wire and all other necessary accessories. (Copper sockets for copper cables & Aluminium sockets for Aluminium cables)
-
-
-
3.5C 240 Sq.mm XLPE aluminium armoured Cable
3
-
607.51
3.5C 185 Sq.mm XLPE aluminium armoured Cable
5
-
512.49
3.5C 150 Sq.mm XLPE aluminium armoured Cable
3
-
439.76
3.5C 120 Sq.mm XLPE aluminium armoured Cable
5
-
381.1
3.5C 95 Sq.mm XLPE aluminium armoured Cable
5
-
367.02
3.5C 70 Sq.mm XLPE aluminium armoured Cable
3
-
330.66
3.5C 50 Sq.mm XLPE aluminium armoured Cable
3
-
296.64
3.5C 35 Sq.mm XLPE aluminium armoured Cable
3
-
280.21
4 Core 25 Sq.mm XLPE aluminium armoured Cable
3
-
254.4
4 Core 16 Sq.mm XLPE aluminium armoured Cable
66
-
254.4
4 Core 10 Sq.mm PVC aluminium armoured Cable
44
-
139.52
4 Core 6 Sq.mm PVC Copper armoured Cable
33
-
130.13
4 Core 4 Sq.mm PVC Copper armoured Cable
33
-
130.13
4 Core 2.5 Sq.mm PVC Copper armoured Cable
33
-
125.44
3 Core 4.0 Sq.mm PVC Copper Armoured Cable
44
-
128.96
3 Core 2.5 Sq.mm PVC Copper Armoured Cable
44
-
124.27
24 Core 2.5 Sq.mm PVC Copper Armoured Cable
3
-
236.81
1Core 16 Sq.mm XLPE Copper Flexible Cable for UPS
55
-
320.02
1Core 6 Sq.mm XLPE Copper Flexible Cable for UPS
11
-
317.67
LIGHTING DBs, POWER DBs, & RECEPTACLES:
-
-
-
Supply, erection, earthing, testing and commissioning of the following MCB type Lighting and Power DB's IP 43 Protection Double Door type with powder coated including all interconnections and accessories like bolts, nuts etc; Legrand(Ekinox 3) / Schneider-Acti9/Hager - Novello+/ Seimens BETAGUARD/Crabtree Xpro classique-II/
-
-
-
LIGHTING DISTRIBUTION BOARD: LDB
-
-
-
LDB - 8Way 7Segment type, Phase segregation compartmental type MCB DB comprising of the following:
-
-
-
Incomer : 1 No. 63Amps, 4Pole MCB ("C" curve)
-
-
-
Phase Segregation : 3 Nos. 25Amps, 30mA DP ELCB
-
-
-
Outgoings : 24 Nos. 6/10Amps, SP MCB ("C" curve)
6
-
28523
RAW POWER DISTRIBUTION BOARD: PDB
-
-
-
LDB - 6Way 7Segment type, Phase segregation compartmental type MCB DB comprising of the following:
-
-
-
Incomer : 1 No. 63Amps, 4Pole MCB ("C" curve)
-
-
-
Phase Segregation : 3 Nos. 25Amps, 30mA DP ELCB
-
-
-
Outgoings : 18 Nos. 6/10Amps, SP MCB ("C" curve)
4
-
26023
UPS DISTRIBUTION BOARD: UDB
-
-
-
LDB - 6Way 7Segment type, Phase segregation compartmental type MCB DB comprising of the following:
-
-
-
Incomer : 1 No. 63Amps, 4Pole MCB ("C" curve)
-
-
-
Phase Segregation : 3 Nos. 25Amps, 100mA DP ELCB
-
-
-
Outgoings : 18 Nos. 6/10Amps, SP MCB ("C" curve)
2
-
26582
EMERGENCY LIGHTING DISTRIBUTION BOARD: ELDB
-
-
-
LDB - 12Way SPN MCB DB comprising of the following:
-
-
-
Incomer : 1 No. 25Amps, 100mA DP ELCB
-
-
-
Outgoings : 6 Nos. 16Amps, SP MCB ("D" curve)
2
-
7811
External Lighting Distribution Board:
-
-
-
EX. LDB - 6Way, ETPN compartmental type MCB DB comprising of the following:
-
-
-
Incomer : 1 No. 63Amps, 4Pole MCB ("C" curve) with 24 Hrs. Timer + Power Contactor for Automatic switching the lighting circuit
-
-
-
Outgoings : 3 Nos. 16Amps, TP MCB ("C" curve) 3 Nos. 10Amps SP MCB ("C" curve)
2
-
18139.65
MAIN ELEC PANEL[Make-(a)MCB /MCCB -Legrand/L&T/ABB/SCHNIDER/ANCHOR-PANASONIC ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark]
1
-
1032127
Incomer - 1 : (EB Supply)
-
-
-
1 No. 1000Amps, 4Pole, 65KA, Electrical draw out type Air Circuit Breaker (ACB) complete with microprocessor based OL, SC, UV, ST & earth fault releases, shutter assembly, door interlock and all other accessories.
-
-
-
Metering (EB):
-
-
-
1 Set of RYB Phase indication LED lamps
1 set of Breaker ON, Breaker OFF, Breaker Trip Indication lamps
1 No. Digital Mult-Function Meter with RS 485 port 1 Set of Current transformers of ratio 1600/5A,class 1 for metering
1 No. of Current transformer of ratio 1600/5A,class5P10 for protection
1 No. of current transformer of ratio 600/5A, for APFC
1 No. Under voltage / Over voltage relay, Single Phasing Preventer
2 Set of Control MCBs
1 No. 3P+N, Type-2, 40KA Surge protection Device with wiring
-
-
-
1 No. 1000Amps, 4Pole, 65KA, Electrical draw out type Air Circuit Breaker (ACB) complete with microprocessor based OL, SC, UV, ST & earth fault releases, shutter assembly, door interlock and all other accessories.
-
-
-
Metering (EB):
-
-
-
1 Set of RYB Phase indication LED lamps
1 set of Breaker ON, Breaker OFF, Breaker Trip Indication lamps
1 No. Digital Mult-Function Meter with RS 485 port 1 Set of Current transformers of ratio 1600/5A,class 1 for metering
1 No. of Current transformer of ratio 1600/5A,class5P10 for protection
1 No. Under voltage / Over voltage relay, Single Phasing Preventer
2 Set of Control MCBs
1 No. 3P+N, Type-2, 40KA Surge protection Device with wiring
-
-
-
Bus Coupler:
-
-
-
1 No. 1250Amps, 4Pole, 50KA, Electrical draw out type Air Circuit Breaker (ACB) complete with microprocessor based OL, SC, releases, shutter assembly, door interlock and all other accessories.
-
-
-
INTERLOCKING
-
-
-
Electro - Mechanical interlocking arrangements provided between the EB Incomer, Bus coupler, DG Incomer
-
-
-
OUTGOINGS
-
-
-
2Nos. 630Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (Building Main Panel and APFCR Panel, )
-
-
-
1Nos. 400Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (Fire panel )
-
-
-
1Nos. 250Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (Utility Panel)
-
-
-
2Nos. 200Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (UPS Input Panel and Spare, )
-
-
-
2 Nos. 125Amps, TP+N, 35KA, MCCB with Thermal Magnetic based OL,SC releases (Spare )
-
-
-
a) All the outgoing breakers with O/C, Time adjustable short circuit releases. b) All the outgoing feeders shall be provided with ON/OFF indication lamps. c) Suitable Busbar to be provided as per Current Density.
d) Suitable size outgoing cable chamber, earthing arrangements should be provided for connecting the number of outgoing cables. The board shall be fabricated for future extension of the panel board.
-
-
-
APFCR PANEL[Make-(a)MCB /MCCB -Legrand/L&T/ABB/SCHNIDER/ANCHOR-PANASONIC ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark]
1
-
959243
Incomer - 1 : (Main EB Panel)
-
-
-
1 No. 630Amps, 4Pole, 36KA, MCCB complete with microprocessor based OL, SC, UV, ST & earth fault releases, shutter assembly, door interlock and all other accessories.
-
-
-
Metering (EB):
-
-
-
1 Set of RYB Phase indication LED lamps
1 set of Breaker ON, Breaker OFF, Breaker Trip Indication lamps
1 Set of Current transformers of ratio 630/5A,class 1 for metering 1 Set of APFCR Relay
2 Set of Control MCBs
1 No. 3P+N, Type-2, 40KA Surge protection Device with wiring
-
-
-
OUTGOINGS
-
-
-
2Nos. 250Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (100 kVAR)
-
-
-
2Nos. 100Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (50 kVAR)
-
-
-
5Nos. 63Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (20 kVAR,10 kVAR and Spare)
-
-
-
2nos 100kVAR (480V) Capacitor banks controlled by suitable rating capacitor duty contactors & 7% detuned reactor with On/Off indicator and push button.
-
-
-
2nos 50kVAR (480V) Capacitor banks controlled by suitable rating capacitor duty contactors & 7% detuned reactor with On/Off indicator and push button.
-
-
-
2nos 20kVAR (480V) Capacitor banks controlled by suitable rating capacitor duty contactors & 7% detuned reactor with On/Off indicator and push button.
-
-
-
1nos 10kVAR (480V) Capacitor banks controlled by suitable rating capacitor duty contactors & 7% detuned reactor with On/Off indicator and push button.
-
-
-
a) All the outgoing breakers with O/C, Time adjustable short circuit releases. b) All the outgoing feeders shall be provided with ON/OFF indication lamps. c) Suitable Busbar to be provided as per Current Density.
d) Suitable size outgoing cable chamber, earthing arrangements should be provided for connecting the number of outgoing cables. The board shall be fabricated for future extension of the panel board.
-
-
-
FLOOR LIGHTING PANEL [Make-(a)MCB /MCCB -Legrand/L&T/ABB/SCHNIDER/ANCHOR-PANASONIC ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark]
5
-
266207.46
Incomer - 1 : (Buliding Main Panel)
-
-
-
1 No. 63Amps, 4Pole, 36KA, MCCB complete with microprocessor based OL, SC, UV, ST & earth fault releases, shutter assembly, door interlock and all other accessories.
-
-
-
Metering (EB):
-
-
-
1 Set of RYB Phase indication LED lamps
1 set of Breaker ON, Breaker OFF, Breaker Trip Indication lamps
1 Set of Current transformers of ratio 63/5A,class 1 for metering 1 No. Ammeter & Voltmeter
2 Set of Control MCBs
1 No. 3P+N, Type-2, 40KA Surge protection Device with wiring
-
-
-
OUTGOINGS
-
-
-
8Nos.40Amps, TP+N, 35KA, MCCB with microprocessor based OL,SC releases (Level 3450 R/P Panel, )
-
-
-
a) All the outgoing breakers with O/C, Time adjustable short circuit releases. b) All the outgoing feeders shall be provided with ON/OFF indication lamps. c) Suitable Busbar to be provided as per Current Density.
d) Suitable size outgoing cable chamber, earthing arrangements should be provided for connecting the number of outgoing cables. The board shall be fabricated for future extension of the panel board.
-
-
-
HVAC MAIN PANEL;[Make-(a)MCB /MCCB -Legrand/L&T/ABB/SCHNIDER/ANCHOR-PANASONIC ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark]
1
-
573000
1no of 800A ,50KA ACB EDO complete with microprocessor based OL, SC, UV, ST & earth fault releases, shutter assembly, door interlock and all other accessories. ACB complete with microprocessor based OL, SC, UV, ST & earth fault releases, shutter assembly, door interlock and all other accessories.
-
-
-
Metering (EB):
-
-
-
1 Set of RYB Phase indication LED lamps
1 set of Breaker ON, Breaker OFF, Breaker Trip Indication lamps
1 Set of Current transformers of ratio 1250/5A,class 1 for metering 1 No. Ammeter &n Voltmeter
2 Set of Control MCBs
1 No. 3P+N, Type-2, 50KA Surge protection Device with wiring
-
-
-
1000A TPN AL. Bus Bar
-
-
-
OUTGOINGS
-
-
-
630A TPN MCCB Mp based - 1 No
-
-
-
400A TPN MCCB Mp based - 2 Nos
-
-
-
160A TPN MCCB TM based - 2 Nos
-
-
-
125A TPN MCCB TM based - 1 No
-
-
-
a) All the outgoing breakers with O/C, Time adjustable short circuit releases. b) All the outgoing feeders shall be provided with ON/OFF indication lamps. c) Suitable Busbar to be provided as per Current Density.
d) Suitable size outgoing cable chamber, earthing arrangements should be provided for connecting the number of outgoing cables. The board shall be fabricated for future extension of the panel board.
-
-
-
EARTHING SYSTEM
-
-
-
Supply, erection, testing and commissioning of GI pipe earth electrode as per IS 3043 standards complete with 3 mtrs Long, 40mm dia GI pipe including 1 run of 50 x 6mm GI flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt.
16
-
2437.86
Supply, erection and testing of Copper Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 40mm dia GI pipe, 600 x 600 x 3.15mm size Copper plate and 2 run of 25 x 3mm Copper flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (UPS EARTHING)
10
-
5668.67
Supply and laying of 50 x 6 mm GI flat
27
-
286
Supply and laying of 25 x 6 mm GI flat
145
-
88.64
Supply and laying of 25 x 3 mm GI flat
170
-
66.12
Supply and laying of 25 x 6 mm Copper flat
145
-
937.28
Supply and laying of 25 x 3 mm Copper flat
126
-
738.24
Supply and laying of 8 gauge bare copper wire
84
-
103.19
Supply and laying of 10 gauge bare copper wire
85
-
135.18
Supply and laying of 8 gauge bare GI wire
525
-
26.89
Supply and laying of 1C x 4 Sq.mm copper flexible Cable (Yellow green)
250
-
58.99
Supply and laying of 1C x 6 Sq.mm copper flexible Cable (Yellow green)
200
-
86.52
Supply and laying of 1C x 16 Sq.mm copper flexible Cable (Yellow green)
100
-
254.33
Earth bus with hylam sheet 0.5mtr long using 25 x 3mm Cu. flat with Insulator
10
-
509.94
Earth bus with hylam sheet 0.5mtr long using 50 x 6mm GI flatwith Insulator
24
-
176.44
CABLE TRAYS ,RACE WAYS & SUPPORTS
-
-
-
CABLE TRAYS
-
-
-
Supply and erection of following sizes GI ladder / perforated type cable rack system made out of Pre Galvanised sheet steel folded to required shape with adequate number of supports.
-
-
-
The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbows, re-deep, coupler plates, etc., The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc., The rack shall have suitable cable clamping arrangements etc. HILTI/TRUE LEADER/RMCON
-
-
-
LADDER TYPE:
-
-
-
2mm thickness Pre-galvanised Ladder type cable tray with coupler plates, bends, anchor fasteners, etc., And the trays to be provided with MS structural supports. (Cost for the MS supports will be calculated in separate line item
-
-
-
600mm width x 150mm Height
145
-
908.17
450mm width x 150mm Height
130
-
801.55
300mm width x 100mm Height
20
-
694.92
PERFORATED TYPE:
-
-
-
2mm thickness Pre-galvanised Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., GI down rods with suitable GI supports and necessary anchor fasteners to be considered for trays upto 200mm size and cost to be included. Above 300mm sizes trays to be provided with MS structural supports. (Cost for the MS supports will be calculated in separate line item)
-
-
-
600mm width x 150mm Height
86
-
1152.23
450mm width x 150mm Height
250
-
895.38
300mm width x 150mm Height
20
-
799.18
Supply, fabrication and installation of Mild Steel structural supports using MS Channel / angle / flat iron supports for Cable trays, PDBs, Panel boards, Isolators, etc., and one coat of primer & two coats of enamel paints, minor civil works etc. as required.
1
-
99500
Raceways
-
-
-
Supply and Installation of following size G I Raceways of 2mm thick with top
cover and required hard ware etc suspended from the ceiling or Along the wall or in trench, in floor or on floor, HILTI/TRUE LEADER/RMCON
-
-
-
100mm x 40mm
50
-
2584.57
150mm x 40mm
35
-
3096.37
300mm x 40mm
25
-
4862.8
JUNCTION BOXES
-
-
-
150mm x 50mm
25
-
2479.12
200mm x 50mm
17
-
2993.3
350mm x 50mm
14
-
5730.02
UPS & INVERTERS:
-
-
-
Supply, Erection, Testing and commissioning of 80 KVA UPS High Performance Double conversion with 3Phase Input / 3 Phase output with sealed maintenance free type Batteries suitable for 30 Minutes backup, battery rack, interconnection cables, etc., The cost is inclusive of inbuilt Isolation Transformer.(MAKE-SHAKTI/QUANTA/NUMERIC/MICROTEK)
1
-
1832847
LIGHTNING PROTECTION SYSTEM
-
-
-
Air-Terminal
Supply, Installation, Testing & Commissioning of Early Streamer Emission (ESE-60) type lightning Air terminal.
Supporting Mast
The mounting pole used to support the lightning air terminal shall be minimum length of 05 Mtr. , non corrosive and made up of medium class GI / SS pipe of 1.5″ diameter having base plate at bottom for securely fixing the mast on roof top. The mounting pole and supports shall be securely fixed with the brackets and PVC insulated metallic guy wires to withstand the maximum wind velocity of that area. Protection Radius :- 79Mtr. Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.
1
-
145450
Lightning Strike Counter
Supply, Installation, Testing & Commissioning of non-electronic & non-resettable (Not require any external power supply) type lightning strike counter to count the lightning stroke having display with IP-67 enclosure including all accessories and connection..(6/7 digit)
Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.
1
-
27250
Supply, Installation, Testing & Commissioning of 70 sq.mm single core FR PVC insulated unseathed copper conductor for voltage grade 1100 volt as per IS -694 from lightning air terminal to earth electrode on wall / ceiling/concrete column/under buried trench by proper saddling & making connection at both ends the and making good the damages caused. All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge
Make of PVC Pipe :- AKG / KINJAL / ORIPLAST
S..(CSR SL . NO- 3.11) .
90
-
771.53
Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL
All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.
3
-
16650
Supply, connection &Testing of sub earthing with 16 Sq.mm single core multi stranded copper flexible wire from surge protection device (SPD) panel to earth electrode & Main panel board to SPD panel including all accessories, cable socketing and connections.
Make :- FINOLEX / ANCHOR / HAVELLS
All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.
18
-
154.73
Supply, Installation, Testing & Commissioning of indoor type wall mounted Surge protection device (SPD) panel made of 2 mm thick CRCA sheet, dust and vermin proof duly powder coated having the following arrangement & complete factory wired by 16 Sq.mm single core multi stranded copper flexible wire.
[A] Type 1+2 AC Surge Protection Device (SPD) (TP+N) (50 KA) - 01 Set
[B] 63 Amp. HRC fuse with link – 03 Nos
[C] 100 Amp. 4 pole stud connector – 01 No
Make of SPD & HRC Fuse :- HAVELLS / L&T / LEGRAND
Make of Wire :- FINOLEX / ANCHOR / HAVELLS
All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.
1
-
18665
Data & Telephone System
-
-
-
Wiring & Sockets
-
-
-
Providing ,fixing , testing and commissioning of Telephone outlets including mounting boxes ,face plates and fixing accessories.
70
-
798.13
Providing ,fixing , testing and commissioning of computer jack (RJ45)(Data) including mounting boxes, face plates and fixing plates.
70
-
1165.02
Providing ,fixing , testing and commissioning of Cat 6(For Tele & Data) insulated computer cable drawn in existing conduit.(Rate shall exclude the cost of 25mm PVC conduit)
165
-
39.96
Providing & fixing of 2 mm thick 25mm (For Tele & Data) PVC Conduit with accessories like bends junction boxes clamps etc. The conduit shall be embedded in floor/roof/wall as required.
1320
-
62.76
Supply & Installation of Server Rack suitable for above mentioned system (Inclusive of all accesories like Power Strip, Patch panel, switch, Cabling, Mounting supports & patch panel(50 pair) for Tele tag block)
5
-
17663.41
Supply & fixing of Cat6 RJ45 to RJ45 7ft Patch Cord - Rack side for Data Resource
70
-
371.84
HVAC / AC (MAKE- MITSUBISHI/O-GENERAL)
-
-
-
260 HP VRF
-
-
-
Air Cooled Type Variable Refrigerant Flow System based on 100% Inverter Scroll Compressor with linear capacity control, IPM Technology, VET Technology, PWM overmodulation control, unique HIC circuit, self diagnostic auto check, auto restart, built in Auto Phase Reversal & Auto Bye Pass functions, Inverter start technology complete with R410A refrigerant based Outdoor & Indoor units, wired / wireless / central remote controllers, refrigerant connectors & joints, copper refrigerant piping, control & transmission wiring, condensate drain piping and other accessories as required and detailed in the specification.
-
-
-
VRF OUTDOOR UNITS :
-
-
-
Modular type low noise outdoor condensing units, comprising of own made Low Pressure Shell type Inverter based Multi Valve Scroll Compressor housed in a separate fire protected enclosure, 6 Pole Motor, Induction type Heater, Suction Gas Cooled Compressor Motor, Accumulator, Blue fin treated condenser coil for corrosion resistant, BLDC condenser fan motor, high ESP and low noise aerodynamic condenser fan, protection devices for inverter circuit (compressor / fan) and fan motor, capable to operate at a temperature range of 15°C to 52°C (Cooling mode) ambient conditions.
-
-
-
20 HP
13
-
476672
Supply of DOUBLE SKIN AIR HANDLING UNITS. ( Edgetech/ Zeco or equivalent make)
-
-
-
a) Supply of 10000 cfm 32 TR Double skin Floor Mounted AHU of 50 mmwg SP forward curve fan 4 row deep dx coil 2 nos 16 TR distributors suitable for VRF outdoor unit of R-410A refrigerant. AHU shall be Double Skin type with 50 mm PUF of 40 KG/M³density. Outer and Inner Skin of the insulated Panels shall be with 0.8 mm thick G.I. sheet and both sides of the panels shall be powdered coated. Evaporator Coil shall be of cooper tube and aluminium finned with 12/13 fins per inch. The fins will be of sine-wave pattern and minimum thickness of fins shall be 0.15 mm. Access Doors to fan chamber shall be provided with minimum 150 mm round view port. The ADP of the coil shall be 55° F. Two bend eliminator shall be provided after the coil. VCD with double skin Aluminium leaf shall be provided at the Blower outlet for both Supply and Return Air. AHU have provide 500 cfm Fresh Air with Aluminum VCD. All screws shall be of Stainless Screw. The blower shall be of Krugger/ Nicotra. The outlet velocity shall not exceed 9.2m/s
4
-
487680
b) Supply of 7000 cfm 16 TR Double skin Floor Mounted AHU of 50 mmwg SP forward curve fan 4 row deep dx coil 1 nos 16 TR distributors suitable for VRF outdoor unit of R-410A refrigerant. AHU shall be Double Skin type with 50 mm PUF of 40 KG/M³density. Outer and Inner Skin of the insulated Panels shall be with 0.8 mm thick G.I. sheet and both sides of the panels shall be powdered coated. Evaporator Coil shall be of cooper tube and aluminium finned with 12/13 fins per inch. The fins will be of sine-wave pattern and minimum thickness of fins shall be 0.15 mm. Access Doors to fan chamber shall be provided with minimum 150 mm round view port. The ADP of the coil shall be 55° F. Two bend eliminator shall be provided after the coil. VCD with double skin Aluminium leaf shall be provided at the Blower outlet for both Supply and Return Air. AHU have provide 500 cfm Fresh Air with Aluminum VCD. All screws shall be of Stainless Screw. The blower shall be of Krugger/ Nicotra. The outlet velocity shall not exceed 9.2m/s
1
-
373120
c) Supply of Double skin Ceiling Suspended AHU of 40 mmwg SP forward curve fan 4 row deep dx coil 1 nos 16 TR distributors suitable for VRF outdoor unit of R-410A refrigerant. AHU shall be Double Skin type with 50 mm PUF of 40 KG/M³density. Outer and Inner Skin of the insulated Panels shall be with 0.8 mm thick G.I. sheet and both sides of the panels shall be powdered coated. Evaporator Coil shall be of cooper tube and aluminium finned with 12/13 fins per inch. The fins will be of sine-wave pattern and minimum thickness of fins shall be 0.15 mm. Access Doors to fan chamber shall be provided with minimum 150 mm round view port. The ADP of the coil shall be 55° F. Two bend eliminator shall be provided after the coil. VCD with double skin Aluminium leaf shall be provided at the Blower outlet for both Supply and Return Air. AHU have provide 500 cfm Fresh Air with Aluminum VCD. All screws shall be of Stainless Screw. The blower shall be of Krugger/ Nicotra. The outlet velocity shall not exceed 9.2m/s
-
-
-
i) 7000 CFM
3
-
364800
ii) 5000 CFM
1
-
307200
AHU Accessories.
-
-
-
a) Ahu Expansion Valve with Control Box
13
-
37696
b) Wired Remote
13
-
5760
ANCILLARY ITEMS
-
-
-
Installation, testing and commissioning of VRF Modular type outdoor units.
-
-
-
20 HP
13
-
18054
Installation, testing and commissioning of DOUBLE SKIN AHU. ( Edgetech/ Zeco or equivalent make)
13
-
14042
Installation, testing and commissioning of AHU Accessories.
-
-
-
a) Ahu Expansion Valve with Control Box
13
-
5015
Supply, Installation, Testing and commissioning of 5.5 Kw DOL Starter panel for AHU.
9
-
18054
Supply & installation of Interconnecting refrigerant pipe work with (19mm/13 mm thick) nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications.
-
-
-
Gas Line & Liquid Line
-
-
-
a) Liquid line with 13mm thick nitrile insulation.
100
-
944
b) Gas Line with 19mm thick nitrile insulation.
100
-
1451.4
Supply & installation of 3 core 1.5 sq.mm copper control cum transmission wiring in PVC conduit between indoor & outdoor.
-
-
-
3 C * 1.5 sq.mm Cu communication cable
110
-
220.7
Supply & installation of PVC drain pipes with 9mm thick nitrile rubber insulation of following sizes (With Lbow, Socket & Reducers).
-
-
-
40mm Dia.
75
-
240.75
Supply & Installation of G.I Slotted Tray for expose copper piping covered with Gi sheet on terrace.
-
-
-
1"x12"x1"
50
-
755.2
Supply of R410A gas as per site requirements
180
-
1103.3
Design, supply, fabrication & erection of air distribution GSS Ducting in accordance with the approved ducting lay out drawing, complete with all accessories, dampers, guide vanes, support, etc.
-
-
-
24 G GP Sheet
700
-
885
22 G GP Sheet
500
-
1003
Acoustic insulation inside the SA Ducts with 25 mm thick F.G. covered with tissue paper and 30 G purported aluminium sheet.
250
-
920
Providing insulation over the ducts with 19 mm thick Aluminum foil faced Nitrile rubber Insulation fix with proper adhesive.
950
-
885
Providing & Connecting canvas in mouthpiece.
9
-
3500
Dynacraft/Premier/carryair or equivalent make linear grills or extruded aluminium section finished with power coated or approved colour.
-
-
-
1)Grills/Diffuser with VCD
20
-
10561
2) Grill /diffuser without VCD
20
-
9670
Dynacraft/Caryair or equivalent make Shutter / Pivot type Fire Dampers of minimum 90 minutes fire holding capacity suitable for mounting on wall and with extended sleeve on both sides for connecting with ducts and complete with Motorized operated closing mechanism and microswitches for interlocking with the starter of AHU Blower Motor, as detailed in the specification.
18
-
32450
Fresh air cowl with VCD and bird screen.
9
-
5428
Stage Craft Works (Make- Canara/ Leksa)
-
-
-
Supply, installation testing & commionsioning of Main Curtain made out of Fire Retardant Velvet Curtain Cloth (Inovativ/Vimal/Relince) with Horizontal Sliding arrangement with Motorized Operation with extruded Aluminum Track (I-Section with centre web of approximate size 60 x 80 mm) centre parting with 1 Meter overlap and mounting arrangement to fix on existing grid. The system shall be complete with Electro-Mechanical drive with 1 HP Single Phase AC Motor (Crompton/Equivalent to Crompton), Compact Gear Box, Belt driven grooved cable drum suitable for 3mm Dia. Wire Rope, Master / Slave Curtain Trollies, diverting Pulley, Low- Voltage Magnetic Control System for operation of Curtain Mechanism, Limit Switches, Air Break Contactors (L&T / Siemens) complete with low- voltage magnetic control push station for operation from more than one location with Touch Panel. The Curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering with masking Frill 500mm Drop from Proscenium . Including front frill in same cloth complete with accessories. Appx. Size:-20000 mm X 7500mm. Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
1
-
606977
Supply, installation testing & commionsioning of Center Curtain made out of glazed (Gray) cotton curtain cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangements & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1HP motor (Crompton/ Equivalent to Crompton)) 2nos. air breaker contactors (L&T/SIEMENS), 2 nos. micro switches for auto stop, 3nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering. Appx. Size:-21000 x 7500 (H). Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
1
-
531161
Supply, installation testing & commionsioning Rear Curtain made out of treated black colour crepe/galaze / cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement and motorised operation complete with runners, master runners, pullies, 3mm steel rope wire, 1HP motor (Crompton/Godrej) 2 nos, air breaker contactors (L&T/SIEMENS), 2 nos. micro switches for auto stop, 3 nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm. The curtain should be stitched in double gathering. Appx. Size:- 21mt x 7.5 mt (H). Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
1
-
531161
Supply, installation testing & commionsioning of custumised Cyclorama Screen in plastic perforated material. The screen to be fixed on tubular frame made out of 35mm dia MS pipe. Appx. Size:- 15 mt x 6 mt (H). Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
90
-
2346
Providing and fixing customize Side Wings made out of Fire Retardant black glazed cotton cloth fixed on track. [a] Size: 1200 x 7000 mounted on 25 x 50 x 1.6mm Wielded frame work c/c 600 x 600 fixed with overhead pivote track complete with duly painted on both framework. and 6 mm ply, 6mm foam and cloth clade. Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
8
-
44688
Providing and fixing average Frills made out of double gathering glazed cotton cloth to be installed above the stage on 28mm dia GI pipe. [a] Size: 20000 (AV) X 1800. Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
5
-
57549
Supply, installation testing & commionsioning 50mm dia B class GI pipe to be hung from existing grid or roof structure for side wings, lighting bars. Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
75
-
790
Providing and fixing of MS Pipe Grid over the stage for supporting stage equipment in position 50mm dia GI pipe grid with welded connection, suspended from ceiling structure/ slab by MS flat suspenders with expansion fasteners, centre to centre distance (1 Mtr - 1.2 Mtr), fixed to wall/beam support with MS plate with expansion fasteners etc. painted black with 2 coats of paint and coat of primer. Sq. Mtrs. Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge.
2570
-
56
Providing, fitting and fixing of Proncenium & Stage Facia made of IS 710 merine plywood section with anti termite treatment at the front of stage area. On top of frame structure use 6 mm thick BWR Plywood. Fix-up wooden / glass fiber motive with high quality polish / paint finish as per approved design on it in proscenium area i.e. two side, top front and auditorium floor to stage floor area, complete as per approved specification, design / concept & direction of Engineer -in -charge.
62
-
4100
Providing & fixing Wooden flooring(mikasa-13mm, Oak Bronze/Oak Copper ) with foam on the top of leveled 19mm BWP marine grade ply (century/green IS:710 grade) on existing floor so as to look flush & polished including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
234
-
7610
Providing & fixing Sub-Frame ( Frame Work ) with leveled 19mm BWP marine grade ply (century/green IS:710 grade) on existing floor so as to look flush including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
48
-
3750
Stage Light Works(Make- Canara/ Leksa)
-
-
-
Supply, installation testing & commionsioning of Motorised Lighting Bar (Vertical movement) ; to be provided over Stage, at Spot Bar-1 & 2 and Cyclorama positions ; using 3-ph. 440vAC 2-HP Motor (Crompton Greaves - copper wound/ Equivalent to Crompton)) mounted on Ang.Iron base frame ; Main Drum c/w attached gear box (Greaves) ; Limit-Switch ; Air-Breaker relay ; using 50mm, "B" class MS pipe, supported by Steel wire rope of 6mm . ; 5" Pulleys & Master pulley ; magnetic Brake system (BCH coils) with 4" Drum ; approx. size 12m x 1.5' dia MS pipe "A" class ; 3 nos. push buttons for Up, Down and Stop functions ; Total length: 10m/12m ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
3
-
272860
Supply, installation testing & commionsioning of MS pipe Lighting Bar (fixed): to be provided at FOH position - to be fixed from the existing main structure Girder / Grid / Beams / Ceiling, ; approx. size 12m x 50mm dia B-class,MS PIPE supported by A.I. brackets ; duly painted black,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
1
-
42338
Supply, installation testing & commionsioning of MS pipe Side Light "Ladder" brackets : with 3-sections, to be provided on either sides for Side Lights - using 1.5" square MS Tube ; to be fixed from the existing main structure Girder / Grid / Beams / Ceiling ; approx. size: 1.75ft.x 6ft. ; duly painted black ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of theEngineer-in-charge
6
-
13700
Wiring, installation testing & commionsioning of DMX Points: using .07 sqmm GREESH FR wire with common xlr . ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of Engineer-in-charge
54
-
1317
Wiring, installation testing & commionsioning of DIRECT Points: using 1.5 sqmm FINOLEX FRP wire with common neutral & earth for 2 sockets starting from the patch panel (side of stage) to the Lighting bars/tree or stage points ; terminated at junction box with 2 x 3- pin CEE 16 Amp. Industrial sockets ; cabling laid in PVC conduits .STAGE TO STAGE,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
54
-
2633
DMX & Controls:
-
-
-
Supply, installation testing & commionsioning of Pearl-2048 DMX Lighting Desk : 240 Intelligent Fixtures + 240 Dimmer Channels ; 2048 Channels ; Load and Save shows with USB ; Theatrical Plotting & Playback functions ; Shape Generator ; 15 Playback Masters controlling 450 memories, chases or cue lists MIDI and Sound to Light triggers ; VGA output ; supplied with LEd lamp ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
1
-
300441
Supply, installation testing & commionsioning of DMX Data Splitter: 1 x IN to 8 x OUTPUT DMX-512 Data Splitter Unit, suitable both for Dimmer & Intelligent Lights ; Model: SP-81 ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
2
-
25686
Supply, installation testing & commionsioning of Inter connection - DMX Data patch cables, for interlinking Intelligent Lighting Fix ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
400
-
138
Lighting Fixtures:
-
-
-
Supply, installation testing & commionsioning of LED 'ELF' PAR, RGBW: 180w Pro-series using 60x 3w -1 LEDs ; Powercon connectors for IN & OUT ; DMX-512 signal, 6/9 DMX Channels ; Beam Angle 30 degrees Al. die-cast housing ; s/w suitable clamp ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
18
-
8992
Supply, installation testing & commionsioning of LED PAR, RGBW 162w: using 54 x 3w LEDs ; smooth Dimming from 0-100% ; Beam angle 15 degrees ; DMX-512 signal, DMX Control ; Al. die-cast housing ; s/w suitable C-clamp ; ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
16
-
8992
Supply, Installation, Testing & Commissioning of LED profile 300w 36* voltage0-90-250v/50-60hz,working position: Any safe working position ,lamp: super high power LEDs; white 180w (cool white or warm white) average life time is over 5000h,CRI:90,Lens angle :19*/26*/36*,optinal, LED display channel-2 ch,IP rate :IP 20 indor, speacial zoom funcation with manual adjustment, control mode: master /slave synchronization,DMX 512 control and automatic, run, construction: die-casting aluminum housing silver white and black,optinal of ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
5
-
78975
Supply, installation testing & commionsioning of LED PAR with Lamp : 200W warm white COB LED, (50,000 hrs), Voltage: AC90-260V 50/60Hz, Power consumption: 200W, Dimmer: 0100% electronic dimming, High speed strobe effect with 4 default strobe modes and speed adjustable, Hight light output with pure and even coverage, Light angle: 60°(8083A/ B/C/D), 120°(8083K/L), Control: DMX512, master-slave and sound activated or auto operation, Channels: 3/5/7(8083A), 5(8083D),3(8083B/C/L), 5/7/8(8083K)DMX channels USITT DMX-512, LED display, Low noise and efficient etc as required.make: NSC Model :LPW-803
8
-
21060
Supply, installation testing & commionsioning of LED 'COB' WASH LIGHT for CYCLORAMA: using 80Nos.x 3w Hi-Power 3-in-1 LEDs : IP-65 rated ; Power AC 240V / 50Hz 190W ; Lamp Life: 50000 hours ; Beam Angle: 60°; 0-100% electronic linear Dimmer, 1-10 times/sec strobe; DMX-512 signal, 6 DMX Channels ; Al.die-cast housing ; s/w Power & DMX data link cables; 4-leaf Barndoors & suitable clamp,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
8
-
31590
Supply, installation testing & commionsioning of LED FOLLOW SPOT Light (compact): Long throw ; using Hi-Power 150w LED ; On- board Manual Controls for Dimmer, Iris, Colors & CT Correction Filters ; IP-20 rated ; Power AC 240V / 50Hz 165W ; Lamp Life: 50000 hours ; supplied with Folding Stand ; including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
1
-
82967
Supply, installation testing & commionsioning of LED SPOT 200 Moving Head : using 200W single white LED lamp ; 12° to 36° linear motorized zoom ; rotatable gobo wheel (7 gobos plus open) ; static gobo wheel (9 gobos plus open) ; color wheel (7 colors plus open) ; motorized linear IRIS ; 3-facet rotating prism ; variable frost filter ; motorized linear focus ; 0-100% linear LED dimmer ; variable speed shutter/strobe ; Control Channel: 15 / 17 DMX channels ; Power Consumption: 300W ; ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
6
-
75816
Supply, installation testing & commionsioning of Smoke Machine: 1500w ; DMX operated ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
1
-
26234
Supply, installation testing & commionsioning of Safety Chain/Wire with suitable hooks ,including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
54
-
1051
AUDIO & VIDEO SYSTEM
-
-
-
Supply of 2-way 15 Inch Horn loaded Biampable coaxial loudspeaker having a 2 Inch Titanium HF compression driver or better & a 15 Inch LF driver. The speaker should have a Freq. Response (-3 dB): 63 Hz - 15 kHz or better; Sensitivity ≥ 105 dB; Max SPL 137 dB; LF continuous Power consumption of ≤ 400 W & HF continuous power consumption of ≤ 50 W & a Nominal Impedance of 8 Ohms. The Speaker should have a rotatable waveguide with 60° (or 40°) Horizontal & 40° (or 60°) Vertical dispersion angle or lesser. The enclosure should be made of 13 ply, 18mm birch plywood & should have atleast 26 Suspension points for permanent install. (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-EVH1152S64B)
2
-
386000
Supply of 2-way 15 Inch Horn loaded Biampable coaxial loudspeaker having a 2 Inch Titanium HF compression driver or better & a 15 Inch LF driver. The speaker should have a Freq. Response (-3 dB): 63 Hz - 15 kHz or better; Sensitivity ≥ 105 dB; Max SPL 137 dB; LF continuous Power consumption of ≤ 400 W & HF continuous power consumption of ≤ 50 W & a Nominal Impedance of 8 Ohms. The Speaker should have a rotatable waveguide with 90° (or 60°) Horizontal & 60° (or 90°) Vertical dispersion angle or lesser. The enclosure should be made of 13 ply, 18mm birch plywood & should have atleast 26 Suspension points for permanent install. (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-EVH1152S96B)
2
-
386000
Supply of Flying ,arrayble Full Size dual 15", subwoofer element . The subwoofer must have frequency range of 30Hz-3200Hz(-10dB), sensitivity (1W/1m)101 dB SPL or more, delviering Max SPL of 137dB or more with power handling peak of 4000W or less. The speaker should have a nominal impedance of 4 Ω.The loudspeaker should have atleast 26 or more suspension points and should be riggable in the same array as the main speakers using OEM brackets only. (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-EVF2151DB)
2
-
285200
Supply of Coupling brackets for FOH Speakers OEM Brackets for coupling Line arrayable Speaker cabinets Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-VRK-3B)
4
-
92358
Supply of 12" Two-way Powered Speaker with one 1.5" HF Titanium Diaphragm compression driver with a Frequency Response(-3dB):- 68Hz-18KHz & In built Power amplifier of 1000 W or better. The Loudspeaker should have a Max. SPL of 125dB.The Sound Dispersion should be 90x55 Degress or better. The speaker should have both built in line level inputs. It should have polypropylene enclosure. (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-ZLX 12P-AX)
4
-
60677
Supply of 18" Subwoofer with a Frequency Response(-3dB):- 50Hz-90Hz; Frequency Range (-10dB):- 35Hz-250Hz ; Axial Sensitivity 95dB & Long Term Power Handling of ≤ 400W (at a Nominal Impedance of 8 Ω). The Loudspeaker should have a Max. SPL of 133dB. (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-VoiceEKX-18S)
4
-
94183
Supply of Wall mountable 2 way speaker, consisting of two 5.25” or better LF drivers & one 1 "or better HF driver, frequency response (-10 dB) : 62 – 19 KHz., sensitivity (SPL 1W/1M) 93 dB with max SPL of 117 dB , Long term program power handling capacity ≤ 300W (at nominal impedance of 8 Ω) , coverage (H x V) 90° x 70° or better, with OEM bracket included. (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-EVID 6.2)
2
-
60163
Supply of Compact 2 Way speaker with following parameters : Low Frequency Transducer : 8 Inch, High Frequency Transducer : 1 Inch Titanium compressor driver, Frequency range (-10 dB): 50 Hz – 20 kHz, Frequency Response (-3 dB): 70 Hz – 20 kHz, Axial Sensitivity ≥ 94 dB (1W/1m), Max. Calculated SPL 122 dB, Continuous passive power handling ≤ 200W, Nominal impedance : 8 Ω Rotatable Coverage: 100° x 50° or less. The speaker should come with OEM bracket (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-ZX1i90)
8
-
59202
Supply of Amplifier for Subwoofers 2 channel class D/H Power amplifier with built in Audio Digital Signal Processor, a Maximum Output Power≥ 900W@8 ohms, ≥ 1750W@4 Ohms, ≥1200W@ 70 Volts, ≥ 2000W@ 100 Volts;Max Bridged Output Power ≥5500W @ 4 ohms,Frequency Response (+/- 1dB) ref. 1 KHz:15Hz - 20KHz,Max input level:+21dBu,Crosstalk - 80dB,input impedence:20kohm,signal to noise ratio 109 dB,with built in Digital Signal processor like - 31 Band Graphic Equalizer per channel, Parametric Equalizer per channel, Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice/DYNACORD-L3600FD)
5
-
117771
Supply of 2 channel class D/H Power amplifier with built in Audio Digital Signal Processor, a Maximum Output Power ≥ 450W@8 ohms, ≥ 900W@4 Ohms for single channel operation; Max Bridged Output Power ≥ 2700W @ 4 ohms,Frequency Response (+/- 1dB) ref. 1 KHz:15Hz - 20 KHz,Max input level:+21dBu,Crosstalk - 80dB,input impedence:20kohm,signal to noise ratio 105 dB,with built in Digital Signal processor like - 31 Band Graphic Equalizer per channel, Parametric Equalizer per channel, Output delays, Audio Limitters, Audio Filters (Approved Makes: Powersoft, Electro-Voice, Dynacord-L1800FD, Lab Gruppen)
1
-
77385
Supply of Dual 4" two-Way Speaker with a Frequency Response(-10dB):- 70Hz-20Khz & Long Term Program Power Handling of ≤ 200W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of atleast 88dB with a Max. SPL of 112dB. It should have Built in LMT with Power Taps of 7.5/15/30W at70/100V Line. The Sound Dispersion should be 120x70 Degrees or more. The Speaker Should Come with OEM wall Mounting Bracket. (Approved Makes: d&b Audiotechnik, Meyer Sound, Electro-Voice-EVID 4.2T)
2
-
43100
Supply of Two Channel amplifier providing Rated Output Power; THD1%, 1kHz; 260W @ 70V per channel ; 260W @ 4 Ohms per channel Slew Rate at 1kHz 18V/μs ;Frequency Response, (-1dB,). 1kHz 70Hz - 20kHz; Power Bandwidth THD=1%,Half Power : 45Hz - 19kHz;Input Impedance, 20Hz ... 20kHz, Balanced; 20kOhm; Signal-to-Noise Ratio, A-Weighted 102 dB (Approved Makes: Audiotechnik, Electro-Voice-PA 1250T, Lab Gruppen)
1
-
64300
Supply of 22 Channel Audio Mixer 22 channel Compact Mixing System (18 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel to Channel -80 dB, THD at 1 kHz 0.005%, CMRR MIC input 1 kHz 80 dB, Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate :24-bit, 44.1 / 48 / 88.2 / 96 kHz (Approved Makes: Dynacord-CMS2200-3, Midas, Allen & Heath)
1
-
213000
Supply of Wired Vocal Microphone Dynamic Cardioid Vocal Microphone with Freq. Response : 30 Hz – 16 kHz or better, Sensitivity ≥ 2.2 mV/pascal, Dynamic Range 140 dB, Impedance: 350 ohms (Approved Makes: Audio Technica, Senheiser, Electro-Voice-ND76S)
3
-
12800
Supply of Wired Instrument Microphone Dynamic Supercardioid instrument Microphone with Freq. Response : 70 Hz – 17 kHz or better, Sensitivity ≥ 2.3 mV/pascal, Dynamic Range 140 dB, Impedance: 350 ohms (Approved Makes: Audio Technica, Senheiser, Electro-Voice-ND46)
3
-
14670
Supply of Tom Snare Microphone Dynamic Tight Cardioid instrument Microphone with Freq. Response : 80 Hz – 16 kHz or better, Sensitivity ≥ 2.3 mV/pascal, Dynamic Range 140 dB, Impedance: 350 ohms (Approved Makes: Audio Technica, Senheiser, Electro-Voice-ND44)
2
-
13200
Supply of Condenser Cardioid Microphone Self-biased condenser Cardioid instrument Microphone with Freq. Response : 55 Hz – 20 kHz or better, Sensitivity ≥ 10 mV/pascal, Max SPL 145 dB, Impedance: 200 ohms (Approved Makes: Audio Technica, Senheiser, Electro-Voice-ND66)
2
-
19100
Supply of Kick Drum Microphone Dynamic Supercardioid Kick drum Microphone with Freq. Response : 20 Hz – 10 kHz or better, Sensitivity ≥ 0.7 mV/pascal, Max SPL 138 dB, Impedance: 150 ohms (Approved Makes: Audio Technica, Senheiser, Electro-Voice-ND68)
2
-
17309
Supply of Podium Microphone Freestanding Gooseneck Mic with base for podium having dual condensor back electret microphone element ,Selectable Omnidirectional/ Cardioid/ Supercardioid/ Hyper Cardioid polar pattern,LED status display and with programmable button for Push to Talk or Push to Mute functions having ,frequency response 50Hz-20kHz ,sensitivity 5.5mV/ Pa, clipping level 125dB SPL ,output impendence 200 ohm, Dynamic Range 100 dB. (Approved Makes: Audio Technica, Senheiser, Electro-Voice-PC Desktop-18)
2
-
37069
Supply of Handheld Wireless Mic with the following specifications - Transmitter: 1. Frequency Response - 30 Hz to 16 KHz 2. Polar Pattern - Cardioid/ Supercardioid3. Sensitivity 5.2 mV/Pa 4. RF Output Power - 50 mW 5. Should have the provission of changing Microphone heads Receiver: 1. Bandwidth - 36 MHz 2. Carrier Frequency Range - 480 to 865 MHz 3. Signal to Noise Ratio 100 dB A 4. Frequency Response - 55 Hz to 16 KHz (Approved Makes: Audio Technica, Senheiser, Electro-Voice-RE3-ND 76 -5H)
1
-
78000
Supply of Handheld Wireless Mic with the following specifications - Transmitter:1. Frequency Response - 30 Hz to 18 KHz 2. Polar Pattern - Cardioid/ Supercardioid 3. Sensitivity 0.5 mV/Pa 4. RF Output Power - 50 mW 5. Should have the provission of changing Microphone heads Receiver: 1. Bandwidth - 36 MHz 2. Carrier Frequency Range - 480 to 865 MHz 3. Signal to Noise Ratio 100 dB A 4. Frequency Response - 65 Hz to 16 KHz (Approved Makes: Audio Technica, Senheiser, Electro-Voice-RE3-BP-HW-5H)
1
-
78000
Supply Laying of Speaker Cable 2 core X 2.50 Sq. mm (80/32AWG) ATC Copper conductor PVC compound Insulated, Vasiform Sheathed Low Voltage Installation Speakers Cable.
200
-
135
Supply Laying of Analog Snake Cable 12 Pair 19/40 analog snake cable (Approved Makes: Krystal, Klotz, Belden, Falcon)
100
-
490
Supply of Microphone Stands. (Approved Makes: Custom/ Standard Makes or equivalent)
4
-
1800
Supply of Stage Mic. Patch Box with 06 XLR/ Phono connectors (Approved Makes: Custom/ Standard Makes or equivalent)
2
-
7000
Supply of XLR, Speakon, TRS, Phono, etc connectors (Approved Makes - Neutrik/ Amphenol or equivalent)
1
-
20000
Projection System DLP, Native Resolution WUXGA 1920 x 1200 pixels, Brightness 10,000 ANSI Lumens , Contrast Ratio * 100,000 : 1 Light source Type Laser Diode, Light source Life (Normal / Eco) ** 20,000 / 45,000 Hours,Keystone Adjustment 2D, Vertical & Horizontal ± 30 degrees, Resolution Support VGA (640 x 480) to WUXGA (1920 x 1200) , Horizontal Frequency 15k~92kHz Vertical Scan Rate 23~85Hz Compatibility HDTV Compatibility 480i, 480p, 576i, 576p, 720p, 1080i, 1080p Interface Computer Input 1 (D-sub 15pin) x 1 HDBaseT x 1 (Shared with RJ45) Computer Input 2 (5BNC, R / G / B / H / V) x 1 DisplayPort x 1 Monitor Output (D-sub 15pin) x 1 Trigger x 1 HDMI (1.4a) x 1 (Compatible with HDCP) RS232 (DB-9pin) x 1 DVI-D Input x 1 (Compatible with HDCP) 3D Sync Output x 1 LAN (RJ45) x 1 (LAN Control) Wired Remote x 1 3G-SDI x 1 (Input / Output) IR Receiver x 2 (Front + Rear) Make-Epson/Panasonic/Benq-LU9915
1
-
1345000
Supply of Projection Lens suiable for long throw application up to 50 Mtr distance from screen Epson/Panasonic/Benq-LS 1LT 3
1
-
225000
Supply of Motorised Projection Screen, 16:10 Wide format, Dimensions: 23'X14' Tensioning system provides an extra flat surface for optimum image quality, Da-Mat surface, Heavy duty Extruded aluminium Case with low voltage dry contact to interface with Control systems. (Approved Makes: Liberty/ Draper or equivalent)
1
-
442000
Supply of Audio & Video (HDMI) Transmitter & Receiver, supports up to viodeo resolution 4K including 1080p/60 deep color (Approved Makes: Kramer / Extron / Crestrome or equivalent)
1
-
45000
Supply of Accessories loke HDMI Cable, CAT 6 Cable, Connectors, Patch Cord etc.
1
-
25000
Supply of 32 U Equipment Rack with castors, trays, adequate power sockets, exhaust fans (Approved Makes: Valrack/ Comrack/ Net Rack or equivalent)
1
-
28500
Installation, testing and Commissioning of the system
1
-
250000
FIRE PUMP HOUSE
-
-
-
Supply, installation, testing and commissioning of electrically driven high pressure centrifugal fire hydrant / sprinkler pump, suitable for automatic operation SS terrace pump for down comer type of FF systems 15 HP , 900 LPM ,2800 RPM , 30 Mtrs Head . Common base plate for and from M.S. Channel for required size.
1
-
97920
Supply & Installation of Control panel, All MCCB's to be suitable for motor duty and shall be of minimum 25 KA breaking capacity. Provision shall be made for providing potential free contacts to all pumps starters for connection to building automation system.
1
-
35955
Supply & Installation of Cable, cable alleys,wiring,cabling,cable tray and interlocking, for Control Panel
1
-
34425
Providing & fixing dial type (100 mm dia) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required.
1
-
2830.5
Supply Installation of Pressure switch
1
-
4819.5
Providing and installation dual plate wafer type spring loaded, EPDM rubber lining seat, ductile iron disc and C.I. body Non Return Valve PN 1.6 as per IS: 5312
-
-
-
100 NB
1
-
13540.5
Providing and fixing suitable insertion between flanges as per BS-10 Table D/E wafer type spring loaded, Nitrile rubber lining seat, SG iron disc, AISI-410 SS STEM and C.I. body Butterfly valve PN 1.6 Hand lever operated, conforming to IS : 13095. Body Test Pressure:2.4 Mpa and Seat Test Pressure: 1.6 Mpa.
-
-
-
100 NB
4
-
7879.5
80 NB
3
-
6655.5
Providing and installation of GM Ball Valve, IS-318 LTB-2 SS Stem AISI 410, Ball SS 304/CF8, teflon gland packing, screwed female threads to IS-554,
-
-
-
25 NB
3
-
2218.5
15 NB
3
-
2065.5
Providing and fixing gunmetal single acting air relese valve with screwed inlet 15 mm dia as per IS 12992 rated for 20 Kg/Sq.cm
3
-
3748.5
FIRE HYDRANT SYSTEM
-
-
-
Providing, laying, jointing and testing of following sizes of MS Medium class pipes with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification.
-
-
-
150 NB
84
-
3503.7
100 NB
60
-
2799.9
80 NB
6
-
1927.8
25 NB
6
-
566.1
Providing and fixing TAC approved fire hose cabinet to house stand post fire hydrant, including all other related accessories fabricated from 16 gauge M.S. sheet of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be painted with post office red colour.
6
-
6120
Providing & fixing 63 mm dia 30 mtr. long Reinforced rubber lined hose pipe including gunmetal male & female instantaneous type coupling machine wound with G.I. Wire complete in all respects. Hose shall permaline hose and coupling to approved by fire authority.
12
-
7267.5
Providing & fixing fire hydrant valve with single outlet, SS IS:5290:1983 type "A" grade with 80 mm N.B. flanged inlet, brass spindle, 63mm female instantaneous outlets, complete with gunmetal blank caps chains, bearings IS:6290 mark and having TAC approved flange O.D. 220mm PCD 180mm eight 19mm dia holes.
6
-
9256.5
Providing & fixing SS 63mm dia. Short branch pipes with 20 mm dia. Nozzles, ISI Marked as per approved make.
6
-
2448
Providing & fixing swinging type First Aid hose reel in red colour drum with 36 mts long and 20 mm dia heavy duty rubber water hose including 20 mm dia ball valve, terminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete with MS socket for tap-off, drum and brackets (including painting) for fixing on wall with anchor fastner, bolts & nuts ccomplete as required.
3
-
9027
Providing & fixing SS fire brigade connection (suction collecting head) consisting of 2Way. 63 mm dia instantaneous type male couplings with built-in check valves, 1 No. 100 mm dia Butter Fly valve and 100 mm dia flanged outlet complete with bolts, nuts and rubber insertions as required and as per IS standards.
1
-
11781
Portable Chemical Fire Extinguishers
-
-
-
Providing and Installation CARBON DIOXIDE TYPE Fire Extinguisher 4.5 KG capacity as per IS 15683:2006 complete with all the fittings and accessories with ISI Mark, CE Approved Cylinder conforming to IS: 7285 ISI Marked, with CCOE Approval Valve conforming to IS: 3224 ISI Marked and CCOE approval complete with Initial charge. Available with Screw Down or Squeeze Grip Valve, Fire Rating: 13B
10
-
9333
Providing and Installation of STORED PRESSURE 6 KG ABC TYPE Fire Extinguisher Designed as per IS 15683:2006 complete with all the fittings and accessories with ISI Mark and CE Approved suitable for ‘A’ ‘B’ ‘C’ Class of Fire with ISI mark Powder confirming to IS: 14609 with Pressure guage, discharge hose and nozzle. Fire Rating: 3A 21B
10
-
3442.5
Supply Installation of Safety Signages
40
-
765
SPRINKLER SYSTEM
-
-
-
Providing, laying, jointing and testing of following sizes of MS Medium class pipes with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification.
-
-
-
For Sprinkler system - MS `B' medium class pipe
-
-
-
25 mm dia
174
-
566.1
40 mm dia
42
-
940.95
80 mm dia
36
-
1927.8
15mm dia. Chrome finished sprinkler head as per IS:9972 with standard response 5mm quartz bulb and to operate at 68°C (of K-Factor 80) complete as per given specifications.(UL Listed/FM Approved)
-
-
-
a) Pendent type
76
-
497.25
DETCTION AND ALARM SYSTEM
-
-
-
2 Zone Fire Alarm Panel as per ISI Specs
1
-
32895
Conventional smoke / heat)detector with base
38
-
2325.6
Screw Gripe
1
-
18360
Mannual call point
6
-
2065.5
Hooter
6
-
2065.5
2c / 1.5 Sq MM cable
700
-
149.94
INSTALLATION OF DG SET
-
-
-
Design, supply, erection, testing and commissioning of 500 KVA silent type DG set with AMF, 415V three phase 1500 RPM ,50HZ ,8 Cylinder with 4 nos earthing, 1000 AMP 4 POLE CHANGE OVER ,ms pipe exhaust system, residual silencer, thermal logging and cladding of exhaust pipe complete , D.G. Plinth & Shed as per specification as required and as per direction of engineer-in-charge. Make- Kirloskar/ Mahindra Powerol Ltd/Cumins
1
-
3596749.28
APPROVED MAKE / BRAND FOR CIVIL WORK
-
-
-
a) CEMENT : ULTRATECH, LAFARGE, ACC ,OCL & BIRLA GOLD
-
-
-
b) STEEL : SAIL , VIZAG TATA TISCON, RINL, JINDAL STEEL
-
-
-
c) ALL TYPE OF FLOORING WORKS : JHONSHON & JHONSHON,KAJARIA,NITCO, ORIENT Bell, SOMANY. Cement paint & Anti fugal weather coat of ASIAN PAINT & BERGER of approved brand & quality.
-
-
-
APPROVED MAKE / BRAND FOR P.H. WORK
-
-
-
a) C.P.V.C , Pipes & Fittings:- According to IS:15778 (Make-Supreme,Oriplast)as per specification.
-
-
-
b) Soil Water Rain Pipes(U.P.V.C Type) & fittings:- According to IS 13592/1992(Type-A) & Fittings belonging to IS 14735/1999 (Make-Supreme, Oriplast )as per specification.
-
-
-
d) Ceramic Ware Items :- Wash Basins ,Standing Urinal both type (Long,Short): According to IS 2556 Part-4 2004 (Basin), IS 2556 Part-6 1996(standing urinal) (Make- W. C JAQUAR MAKE & BASIN- JAQUAR MAKE)as per specification.
-
-
-
e) All Chromium Plated Brass Fittings & Fixtures :- According to IS:781-1995 (Make-Jaquar, Cohler & Rokas) as per specification.
-
-
-
f) CPVC Valves as per specification.
-
-
-
g) Kitchen Sink:- Stainless steel sink IS 13983 as per specification.
-
-
-
h) PVC Connection Pipe:- Both end brass nuts with washers
-
-
-
i) Mirror:- PVC Frame with Darwar Shape- Elegant, Charlee as per specification.
-
-
-
k) U.P.V.C Pipes 4kg/sqcm (0.60mpa):- According to IS 4985/2000(Oriplast, Supreme) as per specification.
-
-
-
k) CPVC supreme as per Class -1 SDR- 11 according to ASTMD-2846 as per specification.
-
-
-
l) G.I. Pipe (Medium):-(TATA &ZINDAL ) IS 1239/1992 If required as per specification.
-
-
-
m)10 litr capacity Low level PVC cistern :-(make -parry ware,cera) IS 7231/1994 as per specification.
-
-
-
CESS
1
-
894114.67
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements