Odisha Primary Education Programme Authority Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha Primary Education Programme Authority - OPEPA Tender
Eprocure
Opening Date27 Feb 2021
Closing Date15 Mar 2021
Tender AmountRefer Documents
Costs
EMD
₹ 1,06,300Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_OPEPA_66716_8Bid Award Id
ViewTender No
DPC/SNG/SS/02 OF 2020-21Tender Authority
Odisha Primary Education Programme Authority ViewPurchaser Address
-Website
http://http://opepa.odisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead.
-
-
-
(a)Ground Floor
71.4
-
1074.49
Dismantling and removing R.C.C. columns beams slab staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead.
-
-
-
(a)Ground Floor
1.33
-
1142.92
Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead
-
-
-
(a)Ground Floor
289.75
-
70.12
Dismantling and removing 2.5 cm. thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead
-
-
-
(a)Ground Floor
568.54
-
76.93
Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead
-
-
-
(a)Ground Floor
26.35
-
309.05
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
-
-
-
(a)Ground Floor
155.5
-
214.9
PROPOSED NEW BUILDING
-
-
-
CIVIL WORK
-
-
-
Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
332.06
-
5.63
Earth Work
-
-
-
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
-
-
-
(a)Upto 1.5mtr Depth
240.43
-
203.28
(b) Beyond 1.5mtr to 3.00 mtr Depth
31.9
-
217.95
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
-
-
-
(a)Ground Floor
213.99
-
112.9
Construction of embankment with earth approved material obtained from borrowpits, transporting to site, spreading, grading to required slope and compacting to meet requirement as directed by the Engineer-in-charge.
-
-
-
(a)Ground Floor
75.32
-
140.1
Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
444.13
-
99.99
Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,taxes, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
-
-
-
(a)Ground Floor
46.63
-
283.9
PCC WORK
-
-
-
Providing and laying plain cement concrete of proportion (1:4:8) in foundation and floors using 2.5cm to 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labour, labour cess, T&P, etc. required for the work including shoring, shuttering and dewatering if required including hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
48.78
-
3889.9
RCC WORK
-
-
-
Providing, lifting, hoisting and laying in position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
-
-
-
(a)Ground Floor
52.99
-
4830.9
(B)R.C.C. Plinth Beam
-
-
-
(a)Ground Floor
20.97
-
5180.7
(C)R.C.C. Beams, columns, grider and bressmer etc.
-
-
-
(a)Ground Floor
17.67
-
10429.3
(D)R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height.
-
-
-
(a)Ground Floor
39.53
-
8877.7
(E)R.C.C. Lintel
-
-
-
(a)Ground Floor
3.36
-
8302.4
(F)R.C.C. walls and fins including attached pillasters.
-
-
-
(a)Ground Floor
1.04
-
8998.4
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).
-
-
-
(a)Ground Floor
241.49
-
7460.8
BRICK WORK
-
-
-
Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
11.04
-
4242.4
Providing and laying Brick masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
9.38
-
4275.7
Providing and laying Full Brick Masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in Cement Mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
81.63
-
4097.7
FINISHING WORK
-
-
-
Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge
-
-
-
(a)Ground Floor
447.21
-
147.6
Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
209.24
-
133.8
Providing 12mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
574.65
-
130.9
Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer 12mm thick in CM 1:6 (1 cement : 6 coarse sand) and top layer of 6mm thick cement plaster 1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
518.29
-
255.1
Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge.
-
-
-
(a)Ground Floor
1556.02
-
71.4
Providing and applying Two Coats Plastic Emulsion Paint of approved make, quality and shade over a coat of wall primer of approved quality to the internal plastered surfaces including throughly brushing the surface to make free from foreign materials, sand papering, priming including cost of all materials, cost of all labour, conveyance, loading, unloading, scaffolding, staging, watering and curing, T&P etc. complete as per the direction of the Engineer-in-charge.
(Note: Colour & shade to be approved before procurment & use).
-
-
-
(a)Ground Floor
1037.73
-
135.1
Painting the external surface of the building with Two Coats of Texture Paint(@ 3.28 ltr/10 sqm) over a coat of primer (@ 2.20kg/10 sqm) of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (Note: Colour & Shade to be approved before procurment & use)
-
-
-
(a)Ground Floor
570.11
-
171.6
Providing and painting Two Coats of Synthetic Enamel Paint of approved quality, brand and shade over a coat of red oxide primer to Iron Work including cost, conveyance, royalties, taxes, of all materials, cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
-
-
-
(a)Ground Floor
79.79
-
189.8
FLOORING WORK
-
-
-
Providing and laying 600 mm x 600 mm Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.
-
-
-
(a)Ground Floor
176.19
-
928.9
Providing and laying 300mm x 300mm Non-Skid Ceramic floor tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
40.29
-
655.2
Providing and laying Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.
-
-
-
(a)Ground Floor
193.37
-
799
Providing & laying granite stone flooring using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge.
-
-
-
(a)Ground Floor
9.63
-
2439.1
Providing & laying granite stone flooring in Floors and landing using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
-
-
-
(a)Ground Floor
10.17
-
2400.2
Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
3.42
-
1891.3
Providing & laying kota stone slabs in floors using 16 mm thick kota stone slab of approved quality, colour and size above 0.4 Sqm laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement : 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
82.19
-
940.9
Providing & laying kota stone slabs in dado/Skirting using 16 mm thick Kota stone of approved quality, colour and size above 0.4 Sqm laid over an under layer of 12mm thick cement mortar (1:3) (1 cement: 3 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
12.45
-
1133.5
Providing and laying 22 mm thick Chequered precast cement concrete tiles using marble chips of size 6mm - Light shade using white cement of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
20.67
-
739.4
DOOR AND WINDOW
-
-
-
Providing and Fixing of Double/Single leaf pressed steel Door (TATA Pravesh/Equivalent ), including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
-
-
-
(a)All Floors
39.77
-
13377.6
Providing and Fixing of Double/Single leaf pressed steel Window(Base+Decorative+Grill+Mosquito Net) (TATA Pravesh / Equivalent ), including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
-
-
-
(a)All Floors
33.75
-
20951.3
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
-
-
-
(i) Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
(a)All Floors
37.8
-
364.4
(ii)Providing & fixing 5.5 mm thick glass panes glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete as per Direction of E.I.C.
-
-
-
(a)All Floors
1.35
-
703
Supplying, fitting & fixing of M.S. Grill made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
-
-
-
(a)Ground Floor
1063.8
-
66.8
S.S Railing
-
-
-
Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.
-
-
-
(a)Ground Floor
138.6
-
333.8
PLINTH PROTECTION
-
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
-
-
-
(a)Ground Floor
328.24
-
289
ROOF TREATMENT
-
-
-
Providing and laying 4cm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips using 2% water proofing compound (make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
328.24
-
619.6
TERRACE WATER PROOFING
-
-
-
Removal Of Screed & Pond Test: (Client Scope) The Existing damaged & delaminated screed is to be remove & mother slab is to be exposed for treatment. Treatment of Construction Joint & cracks: Treating the construction joints , cracks and damp areas by Injecting cement slurry mixed with expanding agent Cebex 100 using pressure grouting pump with a pressure of 3 to 4 kg/sqmt as per manufacturer direction.Surface Preparation:-
Existing Rcc Substrate surface will be made clean, dry, smooth and free of contaminants such as grease, coal tar and oil based products remove without traces. All sharp edges, fins and rough surfaces that could damage the membrane will be removed
Coving:-
Providing and Appling at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with Nitobond SBR at dosage of 1.0 L per 50kg cement where ever necessary.
-
-
-
System Application:-
Providing and Appling Brushbond RFX a two component acrylic polymer modified cementitious coating*Protection Layer : Providing and Laying Protective screed of 2mt*4mt pannel for slope mixed with integral water proofing compound Conplast WL at the dosage of 125ml/bag of cement with a sandwich of 150GSMGeotextile membrane.
Screed is in Client Scope
-
-
-
(a)Ground Floor
328.24
-
360
PAVED ROAD ESTIMATE
-
-
-
Construction of inverted choke by providing,laying,spreading and compacting moorum of specified grade in uniform layer on a prepared surface with motor grader and compacting with power roller etc.all complete as per the direction of Engineer-in-charge.
23.13
-
236.98
Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
4.31
-
283.9
Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 20 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
115.67
-
666.82
For Kerb Wall
-
-
-
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
8.43
-
203.28
Providing and laying Plain Cement Concrete of proportion (1:4:8) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
0.84
-
3889.9
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408.
51.07
-
236.98
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per section 800 of MoRTH specifications for Road & Bridge works (5th revision) and instruction of Engineer in charge.
18.64
-
59.75
P.C.C. work M-15 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying.
0.74
-
4012.1
GATE & COMPOUND WALL
-
-
-
Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
91.38
-
5.63
Earth Work
-
-
-
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
-
-
-
(a)Upto 1.5mtr Depth
118.6
-
203.28
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
-
-
-
(a)Ground Floor
19.07
-
112.9
Disposal of Surplus Earth/Debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge.
-
-
-
(a)Ground Floor
99.53
-
151.2
Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,taxes, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
-
-
-
(a)Ground Floor
63.27
-
283.9
PCC WORK
-
-
-
Providing and laying plain cement concrete of proportion (1:4:8) in foundation and floors using 2.5cm to 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labour, labour cess, T&P, etc. required for the work including shoring, shuttering and dewatering if required including hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
12.85
-
3889.9
RCC WORK
-
-
-
Providing, lifting, hoisting and laying in position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
-
-
-
(a)Ground Floor
15.75
-
4830.9
(B)R.C.C. Plinth Beam
-
-
-
(a)Ground Floor
9.78
-
5180.7
(C)R.C.C. Beams, columns, grider and bressmer etc.
-
-
-
(a)Ground Floor
14.18
-
10429.3
(D)R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height.
-
-
-
(a)Ground Floor
0.95
-
8877.7
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).
-
-
-
(a)Ground Floor
70.06
-
7460.8
BRICK WORK
-
-
-
Providing and laying of Full Brick Masonry work in Superstructure using Fly-Ash bricks confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
51.83
-
4097.7
FINISHING WORK
-
-
-
Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer 12mm thick in CM 1:6 (1 cement : 6 coarse sand) and top layer of 6mm thick cement plaster 1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
353.26
-
255.1
Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete.
(Note: Colour & Shade to be approved before procurment & use)
-
-
-
(a)Ground Floor
353.26
-
132.9
Providing and painting Two Coats of Synthetic Enamel Paint of approved quality, brand and shade over a coat of red oxide primer to Iron Work including cost, conveyance, royalties, taxes, of all materials, cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
-
-
-
(a)Ground Floor
111.38
-
189.8
Supplying, fitting & fixing of M.S. Grill made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
-
-
-
(a)Ground Floor
1305
-
66.8
ROOF TREATMENT
-
-
-
Providing and laying 4cm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips using 2% water proofing compound (make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
7.94
-
619.6
Providing and laying of P.C.C. work of M-15(1:2:4) grade with 20mm and down grade black hard granite (crusherbroken) stone chipswashed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
-
-
-
(a)Ground Floor
1.47
-
4012.1
WATER PROOFING
-
-
-
Removal Of Screed & Pond Test: (Client Scope) The Existing damaged & delaminated screed is to be remove & mother slab is to be exposed for treatment. Treatment of Construction Joint & cracks: Treating the construction joints , cracks and damp areas by Injecting cement slurry mixed with expanding agent Cebex 100 using pressure grouting pump with a pressure of 3 to 4 kg/sqmt as per manufacturer direction.Surface Preparation:-
Existing Rcc Substrate surface will be made clean, dry, smooth and free of contaminants such as grease, coal tar and oil based products remove without traces. All sharp edges, fins and rough surfaces that could damage the membrane will be removed
Coving:-
Providing and Appling at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with Nitobond SBR at dosage of 1.0 L per 50kg cement where ever necessary.
-
-
-
System Application:-
Providing and Appling Brushbond RFX a two component acrylic polymer modified cementitious coating*Protection Layer : Providing and Laying Protective screed of 2mt*4mt pannel for slope mixed with integral water proofing compound Conplast WL at the dosage of 125ml/bag of cement with a sandwich of 150GSMGeotextile membrane.
Screed is in Client Scope
-
-
-
(a)Ground Floor
7.94
-
360
DRAIN
-
-
-
Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
100.8
-
5.63
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
-
-
-
(a) Upto 1.5mtr Depth
113.28
-
203.28
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
37.76
-
112.9
Disposal of surplus earth/debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge.
75.52
-
151.2
Providing and laying plain cement concrete of proportion (1:4:8) in foundation and floors using 2.5cm to 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labour, labour cess, T&P, etc. required for the work including shoring, shuttering and dewatering if required including hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer-in-charge.
7.56
-
3889.9
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(a) R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
16.8
-
4830.9
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment.)
20.16
-
7460.8
Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
32.46
-
4242.4
Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer 12mm thick in CM 1:6 (1 cement : 6 coarse sand) and top layer of 6mm thick cement plaster 1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
255.78
-
255.1
Providing Cement Punning including racking out joints,brushing out dust & loose mortar , washing the surfaces with water,making grooves,beads & drip coarse to give ornamental finish as per drawings.
255.78
-
30
PHE WORK
-
-
-
INTERNAL (P.H)
-
-
-
Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,SUPREME/Truflow of Hind ware.
-
-
-
50mm dia
60
-
923
40mm dia
68
-
600
25mm dia
17
-
303
20mm dia
63
-
227
Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA,AKG.
-
-
-
25mm dia for Drinking & Flushing from source to GL
4
-
175
25mm dia for Drinking & Flushing from GL to OH Tank
4
-
188
Providing all materials, labour, T&P for laying/fixing of following dia uPVC Aquasafe pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. (Make- Make:ASTRAL/ASHIRVAD/AJAYA/AKG,SUPREME/Truflow of Hind ware)
-
-
-
50mm dia
6
-
109
Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC.
42
-
177
Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
8
-
44
For 75mm to 150mm dia pipe to pass in 250mm thick wall
9
-
173
Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge.
2
-
172
Providing all materials, labour, T&P for fitting & fixing of following Bronze Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO. (As per Art no.1008 & HSN Code-84812000 of ZOLOTO)
-
-
-
25mm dia Bronze ball valve
2
-
1493
40mm dia Bronze ball valve
4
-
4034
50mm dia Bronze ball valve
3
-
6230
Suplying all materials, labour. T&P for fitting and fixing white glazed vitreous china ware porcelain Orissa pattern water closet 580mm x 440mm x 290mm of approved make, confirming to IS-2556 part-3 2004 with top inlet for sinking into floor with 125mm swr'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete as per specification and as per direction of Engineer-in-charge. Make : PARRY WARE/NEYCER/CERA WITH ISI MARK
-
-
-
OrissaWater Closet , white (580x440x300mm)
3
-
2315
10ltr capacity low level PVC cistern
3
-
1430.5
Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete etc. including all taxes, duties, transportation etc. all complete as per direction ofEIC. (Make:HINDWARE/PARRYWARE/CERA)
-
-
-
Wash Hand Basin BLAZE (510X430X180MM) white
6
-
6444
Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china New magnum urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from water supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. (Make:HINDWARE/PARRYWARE/CERA)
-
-
-
Urinal (New magnum)Size-380x480x590mm
2
-
6038
Supplying all materials ,lbour& T&P for fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification.Make-PARRYWARE/CERA/HINDWAREOR EQUIVALENT
-
-
-
Suating Urinal(Size-350x600x100mm)White
1
-
1968.6
Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin of size 650mmx350mm with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/CERA.
-
-
-
EWC for handicapped toilet.
1
-
12638
Supplying, fitting and fixing of following types CP fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make:PARRYWARE)
-
-
-
15 mm bib cock with wall flange
(As perPARRYWARE, Cat. No.: T4604A1)
3
-
767
15mm dia C.P.Long Body Bib Cock with wall flange.AsPER PARRY WARE CAT NO.-T4606A1
2
-
927
15mm dia CP Pillar Cock .
(As per PARRY WARE, Cat. No: T4601A1)
6
-
804
15mm dia Angular Stop Cock with wall flange
(As per PARRYWARE, Cat. No.: T4607A1)
13
-
743
20 mm dia Concealed Stop Cock with wall Flange with exposed part kit of Concealed Stop cock with feeting sleeve,operating Lever. (As per Jaquar, Cat no.:FLR-CHR-5083NK compatible with ALD-089)
-
-
1495
Sink cock of Regular swinging spout (Table Mounted)
(As per Jaquar, Cat no.:FLR-CHR-5357N)
1
-
1959
Soap disc
(As per Parrt ware, Cat. No.:T6403A1)
13
-
1444
15mm dia C.P.wall mounted sink Cock with wall flange.(AS PER PARRY WARE CAT NO.-T4621A1)
1
-
1313
Towel Ring Round
(As Per PARRYWARE,Cat no.:T6002A)
6
-
1004
150mmX150mm Hinged grating over trap
(As per Prayag, Cat. No.: FT-42 M)
13
-
581
32mm Half Thread Waste Coupling
(As per PARRY WARE, Cat. No.: T9910A1)
6
-
410
32mm Full Thread Waste Coupling
(As per PRRYWARE, Cat. No.: T9911A1)
2
-
410
Braided Hose Connection Pipe
(As perPARRYWARE, Cat. No.: T754099SS)
13
-
312
Extension Piece (15 x 25 mm)
(As per PARRY WARE, Cat. No.: T9830A1)
18
-
110
32mm dia C.P. Robe Hook (Double) (As per Cat. No. T6007A1 of PARRY WARE)
3
-
853
32mm diaPolymer P trap (As per Cat. C830899 of PARRY WARE)
8
-
457
Urinal valve3/4" Concealed Stop cock & wall flange.(As per Cat no.T4612A1 of PARRYWARE)
1
-
925
600mm long Glass Shelf.(AS PER PARRY WARE CAT NO.-T6703A1)
6
-
1441.5
Kitchen sink flat edge,Gloss finish AS PER PARRY WARE CAT NO.-C856971
1
-
5078.5
Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.
-
-
-
Bevelled edge mirror(Golden fish/ Saint gobain)
2
-
2326
Providing all materials, labour, T&P for fitting and fixing of following size of 18 mm thick Granite tile for urinal partition of approved make in all floor with edge moulding & polishing with 90o to wall between two urinals from floor level to 1.4 mtr height etc. all complete as per specification & direction of Engineer-in-charge. (Make:Black Granite)
-
-
-
Granite Tile for Urinal Partition size (1400 mm x 650 mm)
2
-
3374.6
Providing all materials, labour, T&P for fitting and fixing of following size of 18mm thick Granite tile for Kitchen slab approved make in all floor with edge moulding & polishing from floor level to 0.8 mtr height ,600 mm width etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
18mm thick Granite Slab for Kitchen platform
10
-
2512.9
20 mm Thick Kadappa Tile for Kitchen slab& upto 800 mm height for resting upon.
10
-
1604.2
Supplying and Fixing of Sintex Double Layer (ISI Marked) over head water storage tank with following capacities conforming to IS : 12701 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto required elevation and placing the tank to the required position etc all complete as per direction of Engineer-in-Charge.
-
-
-
1500 Litres Capacity Triple Layer Tank
2
-
17976.1
Providing all labour, T&P and machinaries for installation,commissioning of Single phase sensor with level indicator (Drinking & Flushing OHT) and cables etc as per direction of EIC.
1
-
3485
Supply, installation,testing & commisioning of water cooler cum purifier with chiller in floor of following capacity:60/80 SS including fixing the same on the floor with necessary water connection & waste waste arrengments with all labour, T&P etc.all complete as per the specification & direction of EIC. (As per Model :AG Green pure Chill 80SS of Aquaguard)
-
-
-
AG ABSOLUTE COOLER CUM PURIFIER (RO+UV Based).
1
-
46460
Sinking of 200mmx150 mm dia Tube Well up to 100mtr. Depth.
-
-
-
1.Nos. of Borewell
-
-
-
Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well).
-
-
-
Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '100' mtr.
100
-
775.9
Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.
-
-
-
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.
51
-
1614
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC.
1
-
6533
Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.
10
-
424.9
Providing all materials required for construction of brick masonry chamber for encasing the production well with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick on base & 100mm thick on top of the chamber, encasing the annular area of casing pipe with cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm height including form work, filling the inside cavity with sand, C.C. 1:2:4 on top of the chamber of 50mm thick, 12mm thick cement plaster 1:4 on outer wall & top surface, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed with smooth finishing. The height of chamber should be 450mm from G.L. The cost inclusive of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
Outer size 1400mm x 1400mm x 1200mm ht. chambers
1
-
11370
Providing all labour, T&P and machinaries for installation,commissioning of Three phase sensor with level indicator and cables in Raw Water UGR for working of Submerssible pumps etc as per direction of EIC.
1
-
3485
Installation of Submerssible pump set in the Bore-Well
-
-
-
Supply, Installation, testing & commissioning of SINGLE-phase, 50Hz Submersible pump set of required head 50mtr & discharge 2 Lps including HDPE delivery pipes of 10 Kgf/cm2 of material grade P.E.-80,S.S Tapper(Two nos each) of 0-.45 mtr Long,MS Supporting Clamp with MS Nuts and Bolts alongwith 200 mm dia Tube-well cover and cap suitable for above Pump-set and Suitable size of Four core flat cable of 120 mtr with Bore bunched copper conductor insulated sheathed with PVC for Submersible Motor with voltage grade up to 250 Volt ,along-with 2 nos. of earthing 1.5KW and 2 Hp confirming to IS-694/1990 of required length, control panel Star Delta with APFC and ATS arrangement & required accessories suitable for 200x150mm size Production Well ,control panel with Sensor arrangement to run the motor automatically according to Level of Raw Water Sump i.e 50% of Volume& required accessories suitable for 200x150mm size Production Well etc all complete as per specification & direction of EIC.
1
-
22000
External (P.H.)
-
-
-
Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of 110mm square PVC Gully Trap with grating and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royality, cost, conveyance etc. all complete as per specification & direction of EIC.
-
-
-
300mm x 300mm x upto 450mm deep gully trap.
4
-
2397
Providing all materials, labour T&P for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of CI manhole cover with frame (100 kg) for opening of 600x600mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
Inner size 750mm x 750mm x 500mm depth.
1
-
18942
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME
-
-
-
110mm dia soil pipe
15
-
524
110mm dia waste pipe
61
-
524
Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 in all floor with all taxes, duties, transportation & requisite testing as per specification & direction of EIC.
Make:ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME
-
-
-
110mm Pushfit Coupler
25
-
169
110mm x110mm P-Trap
15
-
332
110mmx87.5º bend
17
-
176
110mmx87.5º door bend
4
-
210
110mmx45º bend
36
-
145
110mm dia Single Tee
6
-
246
110mm dia Single 'Y'
12
-
291
110mm dia Single 'Y' with Door
3
-
355
110mm dia Double 'Y' with Door
5
-
402
110mm WC connector straight with lip ring
4
-
330
PVC Clamp Suitable for 110mm dia pipe
6
-
86
110mm dia Vent cowl
4
-
64
110mm Socket plug
5
-
97
External sewerage diaposal
-
-
-
Earth work :
-
-
-
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
20.5
-
203.28
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
19.7
-
112.9
Providing and laying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
-
-
-
For 160mm diauPVS swr Type -B Ring fit pipe
38
-
4199.2
Providing all materials, labour, T&P and laying of SWR Type B uPVC with ISI mark in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) etc complete as per direction of E-I-C.
-
-
-
160mm (NB) dia Upvc swr- Type-B Ring fit pipe pipe
38
-
1090.7
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipesfor roof top rain water (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make: ASTRAL/ASHIRVAD/AJAY.
-
-
-
110mm dia Bend (87.5 degree)
4
-
160
110mm dia pushfit coupler
3
-
135
110mm dia pipe
15
-
524
Supply all materials,labour & T& P for construction of Rain Water Recharge Pits including collection of rain water by laying of RCC NP3 pipes, RCC collection chamber from different source both from roof & inside the Premises and the overflow water will go to storm water drain etc. all complete as per technical specification & direction of EIC.
-
-
-
Inner size 1.2 mtr x 2.00 mtr depth of 150 mm Bore 13 mtr
1
-
43528
Construction of 50 users RCC Septic Tank of inner size 5.00x1.60x1.40m with 2 year cleaning interval
-
-
-
Earth Work:
-
-
-
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
-
-
-
Upto 1.5mtr Depth
30
-
203.28
Beyond 1.5mtr to 3.00 mtr Depth
46
-
217.95
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
24.9
-
112.9
Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,taxes, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
2
-
283.9
Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
4
-
4420.9
RCC WORK
-
-
-
Providing, lifting, hoisting and laying in position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
-
-
-
(a)Ground Floor
2.5
-
4830.9
(B)R.C.C. Beams, columns, grider and bressmer etc.
7.2
-
10429.3
(C)R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height.
1.5
-
8877.7
(D)R.C.C. Walls and fins including attached pillasters.
7.1
-
8998.4
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).
-
-
-
(a)Ground Floor
32.08
-
7460.8
Providing 12mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
47.9
-
133.8
Providing, fitting & fixing of following sizes of precast factory made RCC man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
-
-
-
560 mm dia clear opening CI man hole cover with frame.(As per Jawaswal Neco Industries 560 mm dia Cover with Frame 128 Kg(SF)or equivalant
4
-
268.42
Providing, fitting & fixing of Poly Propylene man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
48
-
233
Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe (Type-B) of approved make confirming to IS-13592/1992 with Vent Cowl including construction of cement concrete pedestal (1:2:4) of size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
2
-
885
Providing, fitting & fixing of 110mm dia S.W.R Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
2
-
246
Providing all labour, T&P for benching & making Channel for inlet & outlet chamber.
1
-
200
Construction of Soak Pit of Inner Dia 1.50m & depth 3.00m
-
-
-
Earth Work:
-
-
-
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
-
-
-
Upto 1.5mtr Depth
9.9
-
203.28
Beyond 1.5mtr to 3.00 mtr Depth
8.9
-
217.95
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
3.5
-
112.9
Providing all material, labour & T&P for filling the both inner & outer surface of soak pit with 40mm size hard granite hand broken metal etc. complete including lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
8.9
-
1839
Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,taxes, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
0.1
-
283.9
Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
0.25
-
4420.9
Providing all material, labour, T&P for Fly ash Brick masonry work using Fly ash of 23cm X 11 cm X 8 cm size having crushing strength not less than 75Kg/Sqcm. in cement mortar (1:4) including cost, conveyance, taxes, royalties, loading and unloading of all materials and labour and scaffolding, watering, curing T&P etc., complete as per the specification & direction of the Engineer-in-charge.
-
-
-
Foundation & Plinth
4
-
4242.4
RCC WORK
-
-
-
Providing, lifting, hoisting and laying in position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(A)R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height.
-
-
-
(a)Ground Floor
0.3
-
8877.7
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).
-
-
-
(a)Ground Floor
0.3
-
7460.8
Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
8.2
-
133.8
12mm thick C.P. 1:4 with punning
6.1
-
162.3
12mm thick C.P. 1:4 with punning and bitumen painting over wall top.
1.4
-
212.3
Providing, fitting & fixing of following sizes of CI man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
-
-
-
560 mm dia clear openingSFRC man hole cover with frame.
1
-
2549
ELECTRIFICATION WORK
-
-
-
Subhead- I (Internal Electrification)
-
-
-
Wiring of light point /fan point /exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with modular switch,modular plate ,suitable GI box and earthing point with 1.5sqmm FRLS pvc insulated copper conductor single core cable etc. as required.
-
-
-
Group A
46
-
717
Group B
12
-
783
Supplying and fixing of two module steeped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
16
-
342
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
3 pin 5/6A switch.
18
-
111
6 pin 15/16A switch.
5
-
175
Supplying and fixing following size/modules, GI Box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
2 module
4
-
243
4 module
9
-
287
8 module
5
-
383
Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.
-
-
-
2X1.5 + 1X1.5 sqmm FRLS Cu wire (for circuit wiring)
500
-
208
2X2.5 + 1X2.5 sqmm FRLS Cu wire (for Light plug circuit wiring)
250
-
229
2X4 + 1X4 sqmm FRLS Cu wire (for power plug)
150
-
263
4X6 + 2X6 sqmm FRLS Cu wire (DB submain)
50
-
529
Supply, delivery and fixing of Ceiling fan hook made out of 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
12
-
120
LED Luminaire (2000 Lumen Battern) PHILIPS (CAT No:BN150W LED20S-6500 PSE OD GR) / Equivalent of Crompton/ Wipro/Jaguar/Halonix
20
-
1261
Emergency Inverter LED Battern Light fitting (2000 Lumen) Halonix (CAT No:HLB0820CWINV) / Equivalent of Jaguar/ Wipro/Phillips.
14
-
1418
LED mirror Light fitting (600 Lumen) Halonix (CAT No:LBRK02S105XW) / Equivalent of Jaguar/ Wipro/PHILIPS.
3
-
663
Angle Holder with LED Light fitting (9W) Halonix (CAT No:Astron Plus9WCWB) / Equivalent of Jaguar/Crompton/ Wipro/PHILIPS.
15
-
318
Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells).
-
-
-
1200 mm sweep
16
-
2103
Supplying, installation, testing and commissioning of Exhaust fan / fresh air fan with louvre (Make -Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells) as required.
-
-
-
Orient Air Flow 3 Blade (300mm) Exhaust Fan
6
-
1725
Supplying and fixing following way, TP and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS)
-
-
-
8 way, Double door
1
-
12941
Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required.
-
-
-
63 Amps4P, 100 MA RCBO
1
-
5321
6 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
24
-
264
Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
150
-
84
25 mm
100
-
90
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.
2
-
4446
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements