Odisha Primary Education Programme Authority Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha Primary Education Programme Authority - OPEPA Tender
Eprocure
Opening Date17 May 2021
Closing Date1 Jun 2021
Tender Amount₹ 65,70,943
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_OPEPA_68430_37Bid Award Id
ViewTender No
DPC/SS/SNG/04/2020-21Tender Authority
Odisha Primary Education Programme Authority ViewPurchaser Address
-Website
http://http://opepa.odisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying & filling foundation and plinth with course sand well watered and rammed including cost, cost of all labour, carriage, royalty, etc complete.(A.R.-2006, Page No - 8, Item No. - 15)
265.95
-
628.25
Dismantling and removing 2.5 cm. thick artificial stone flooring including stacking the useful materials for reuse and removing
the debris within 50m lead.
271.01
-
76.93
Dismantling brick masonry in cement mortar 3m. Height including stacking the useful materials for reuse and removing the debris within 50m. Lead. (A.R.-2006, Page No - 214, Item No. - 3
59.92
-
1074.49
Dismentaling & removing R.C.C columns beams, slab, staircase, landing, lintels, including stacking the useful materials for the reuse and removing the debries within 50 m lead.
3.69
-
1142.92
Labour charges to remove existing loose cover concrete ,chipping and disposing charges of the debris within 50m lead .
2.85
-
235.53
Cleaning the exposed steel bars with angle grinder or wire brush and washing charges of the structure with water jet
2.85
-
209.98
Supplying and application charges for zinc rich primer two coats where ever necessary in ceiling area
2.85
-
565
Supply and making polymer plaster 20mm thick on ceiling area
2.85
-
543.75
Dismentaling & removing Doors, Windowss and ventilators including Removal of frame, hinges, fastening and stacking the useful materials for the reuse and removing the debries within 50 m lead.
38.67
-
309.05
Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead
101.59
-
70.13
Providing & fixing RIGID UPVC SHEET in roof including fixing of ridges wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties etc. all complete(Page 126/33)
11.16
-
850.1
Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete.
68.26
-
4539.84
Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.
18.02
-
5815.75
2.5cm thick Artificial Stone Flooring with CC 1:2:4 with 12mm size BHG chips including cost of all materials, labour, etc. complete. (Ref.:-A/R-2006,P-85,Item no -2)
9.34
-
298.67
12mm thick cement plaster (1 : 4) over brick
work with cement punning for skirting per 1 Sqm.
-
-
-
Ground Floor
134.51
-
155
2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips
-
-
-
Ground Floor
3.01
-
271.04
Providing Reinforced cement concrete work of M-20 grade with 20mm and down grade black hard granite crusher broken chips including cost of all materials labours ,T&P, carriage, royalti, taxes, etc. with watering and curing , all complete. (Item-4, AR-2006)
-
-
-
Foundation RCC
22.35
-
4869.7
Plinth Beam
10.1
-
5219
Lintel Beam
-
-
-
Ground Floor
4.96
-
8336.6
Chajja
-
-
-
Ground Floor
14.27
-
767.89
Roof Beam
-
-
-
Ground Floor
19.17
-
10464.89
Columns RCC
-
-
-
Ground Floor
9.77
-
10464.89
Slab RCC
-
-
-
Ground Floor
13.78
-
8911.81
WALL
-
-
-
Ground Floor
0.53
-
9732.3
Providing HYSD. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. (A.R.-2006, Page No - 52, Item No. - 9)
-
-
-
Ground Floor
100.8
-
7392.03
Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. (Ref.:-A/R-2006,P-71, Item no-2)
-
-
-
Ground Floor
48.27
-
4285.33
Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. (Ref.:-A/R-2006,P-71,Item No-3)
-
-
-
Ground Floor
156.06
-
4128.1
12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ref :-A/R - 2006 ,P- 103, Item No - 4
-
-
-
Ground Floor
669.49
-
137.27
16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ref :-A/R - 2006 ,P- 105, Item No - 14
-
-
-
Ground Floor
785.09
-
195.42
6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ref(A/R-2006,P-103,Item no-27)
-
-
-
Ground Floor
78.64
-
151.55
Providing fixing Vitrified matt tiles (600 X 600)mm in floors or steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles. (As per A.R. 89/16)
-
-
-
Ground Floor Qty.
235.88
-
1260.73
Providing fixing Vitrified matt tiles (300 X 300)mm in floors or steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles. (As per A.R. 89/16)
-
-
-
Ground Floor
37.61
-
1155.56
Providing fixing KOTA TILES in floors or steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles. (As per A.R. 89/16)
-
-
-
Ground Floor Qty.
79.96
-
1050.38
Providing fixing Chequered tiles in floors or steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles. (As per A.R. 89/16)
-
-
-
Ground Floor
45.15
-
805.28
Fixing Matt tiles(600 X 600)mm in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
-
-
-
Ground Floor
21.12
-
1356.05
Fixing Polished tiles(300 X 450)mm in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
-
-
-
Ground Floor
203.14
-
1049.67
Fixing KOTA TILES in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
-
-
-
Ground Floor Qty.
118.37
-
1145.71
Finishing wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. Ref :-A/R - 2006, P-236, Item No - 2
-
-
-
Ground Floor
260.07
-
85.5
Priming 1 coat with Wall Primer water bond cement primer including all labour, materials etc. complete.
-
-
-
Ground Floor
2080.83
-
59.34
Distempering two coats to walls with distemper of approved shade on new work to give an even shade exculding cost of distemper.
-
-
-
Ground Floor
577.75
-
64.93
Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete.
-
-
-
Ground Floor
260.07
-
80.08
Wall painting two coat with any approved Weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.
-
-
-
Ground Floor
1553.69
-
73.57
Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete.
-
-
-
Ground Floor
179.55
-
77.74
Priming one coat with Red Oxide primmer including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1)
-
-
-
Ground Floor
149.19
-
53.16
Painting two coats with approved Enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge. (As per A.R. 93/3)
-
-
-
Ground Floor
149.19
-
133
Supplying of TATA PARVESH DOOR, (PLANE STEEL FINISH), Frame Profile (100X58) Single Rebate with 46mm, Shutter thickness, Shutter infill-Honycomb and Frame Infill- Puff.
-
-
-
Ground Floor
14
-
20051
Supplying of TATA PARVESH WINDOW, (OYESTER WINDOW), Double Rebate Plain Steel Finish with 3 Shutter. 5mm Clear Floated Glass. SS 2X3 hingeswith 2.5 mm thickness, SS Handels, Tower Bolt, Stopper, EPDM Gasket And Corner Bracket.
-
-
-
Ground Floor
6
-
25318
M.S Truss made out of Square Hollow Section of different sizes of grade YST-310 including hoisting joists and trusses and Placing in position (Labour only) including cost of all labour, T&P etc. as per direction of EIC.
-
-
-
Ground Floor Qty.
77.92
-
108.71
Supplying of TATA PARVESH VENTILATOR, Adjustable Ventilator With Grill
-
-
-
Ground Floor
7
-
10593
M.S Truss made out of Channel Section of different sizes of grade YST-310.
-
-
-
Ground Floor Qty.
1299.19
-
70.7
Cost of Barbed Wire for installing in Boundary Fancing.
-
-
-
Ground Floor Qty.
1127.5
-
10.14
Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 1.5mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E. film of grade 2504 including priming the surface
with bituminous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg / Sqm, applying and laying plastic felt membrane with 10 c.m overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete.
-
-
-
Ground Floor
312.81
-
230.09
Providing & laying of 60mm thick factory made cement concrete interlocking paver block of M35 grade and approved make variety colour and size made by Block making machin with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand ,filling the joints with fine sand etc.all compelte including cost,conveyance,royalty,taxes of all materials,labour,T & P etc.Complete as per direction of EIC.
-
-
-
Ground Floor
82.6
-
666.74
Providing and laying at or near ground level factory made Kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. Kerb stone shall be approved by Engineer in-charge).
-
-
-
Ground Floor
4.13
-
6844.85
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect.
-
-
-
Ground Floor
16.33
-
3513.38
Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS
-
-
-
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A
8
-
475
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B
6
-
533
Single light/fan/ex.f/call bell point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-C
2
-
574
subsequent point of group controlWiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
-
372
6A Plug on the same board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved
2
-
316
Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS (AKG or any other equivallent reputed make ISI marked as approved) FRLS as required.
-
-
-
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.
15
-
100
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor. (BDB to LSB/LIGHT CKT/5A PLUG)
10
-
118
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.MAKE KINJAL/ AKG
-
-
-
20 MM
2
-
53
25 MM
2
-
59
Supply and fixing modular type indicator on the existing switch box/cover of Anchor make.
2
-
106
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Havells make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection.
6
-
3097
Supplying and fixing of 40 W LED Street light ,WIPRO WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
1
-
2244
Supplying and fixing of 18 Watt LED round Surface Fittings CAT No. LD80-171-XXX-60-SM , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
2
-
2069
Supplying and fixing of 20 Watt LED Tube light Fittings CAT No. CAT No. LL20-281-XXX-65AL1** , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
6
-
1078
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
15
-
37
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge.
-
-
-
3core x 2.5 sq mm copper unarmoured cable.
25
-
141
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate
with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm
long and fixing the same in ground as required.
8
-
361
DINING AREA Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS
-
-
-
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A
12
-
475
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B
4
-
533
Single light/fan/ex.f/call bell point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-C
4
-
574
subsequent point of group controlWiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
2
-
372
6A Plug on the same board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved
4
-
316
6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved
5
-
338
2x6A Plug on the separate board For computer/UPS/other power point or TV point & other use for Data center/go down area with complete fitting by 02 nos of 5A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved(For ICTC Lab & Class room)
1
-
505
Supplying and fixing 15/16A modular socket with 15/16A Switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
3
-
423
Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS (AKG or any other equivallent reputed make ISI marked as approved) FRLS as required.
-
-
-
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.
21
-
100
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor. (BDB to LSB/LIGHT CKT/5A PLUG)
10
-
118
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor.
12
-
148
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB)
10
-
191
2 nos single core 10 sq. mm copper wire for phase and neutral and 01 nos of single core 6 sq. mm copper wire for earth continuity conductor.(FLOOR PANEL TO BDB )
4
-
255
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB/power unit/point)
2
-
314
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO FLOOR PANEL TO TPN BDB/indivisual power)
1
-
440
Supply, delivery, installation & testing of AC boards consisting of 1 No 20-A DP Modular switch with indicator and 1 No 16A Moular socket in indivisual Modular G.I Box making good the damages caused complete as required and as per direction of Engineer-in-charge.
1
-
930
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens make
1
-
959
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.MAKE KINJAL/ AKG
-
-
-
20 MM
2
-
53
25 MM
2
-
59
Supply and fixing modular type indicator on the existing switch box/cover of Anchor make.
1
-
106
Supplying and installation of AC starter Modular type,L&T make or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including moudlar cover.
1
-
553
Light fitting & Fixture
-
-
-
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Havells make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection.
1
-
3097
Supply delivery, installation, testing & commissioning of 450 mm (18") size Heavy Duty Exhaust Fan, 1400 RPM similar to Almonard complete etc.as required.(For both in and out air exhaust system)(kitchen)
1
-
5201
Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator)
2
-
2758
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator)
2
-
2584
Supplying and fixing of 40 W LED Street light ,WIPRO WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
1
-
2244
Supplying and fixing of 18 Watt LED round Surface Fittings CAT No. LD80-171-XXX-60-SM , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
2
-
2069
Supplying and fixing of 20 Watt LED Tube light Fittings CAT No. CAT No. LL20-281-XXX-65AL1** , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
13
-
1078
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 2x10 cm .
4
-
28
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/L&T/Siemens/HAVELLS make, or any other equivallent A catagories reputed make ISI marked as approved
-
-
-
8 way, Double Door SPN DB (FOR LIGHT/POWER & Repair of office )
2
-
1487
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Legrand/L&T/Siemens make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections.
12
-
155
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.
1
-
1680
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.
1
-
1829
Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 4.5 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
2
-
4775
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.
11
-
100
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
10
-
37
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required.
5
-
853
Supply, delivery, installation, testing & commissioning of L.T. indoor wall mounted type distribution boards made out of 2mm thick CR sheet metal cubicle fixed on m.s. channel base, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade, dust, damp & vermin proof, having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel running horizontally, having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.
-
-
-
Complete duly factory wired as per SLD and panel should have proper earth by suitable rated copper flat.
1
-
30700
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge.
-
-
-
3core x 2.5 sq mm copper unarmoured cable.
12
-
141
3core x 6 sq mm copper unarmoured cable.
10
-
77
3.5 core x 35 sq mm Aluminium armoured Cable.
33
-
243
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.
-
-
-
3.5 core x 35 sq mm Aluminium armoured Cable.
2
-
184
Providing and laying of fallowing dia HDPE pipe (medium class) in ground complete with HDPE fitting incl. trenching(75 mm depth)and refilling.
-
-
-
63 mm Dia, PN-6, PE-80, HDPE pipe
15
-
248
Supply of materials, Fixing of G.I perforated cable tray along with hanging arrangements & supports fabrication complete. For following sizes.
-
-
-
100x50x50x1.6mm thick.
4
-
465
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate
with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm
long and fixing the same in ground as required.
8
-
361
Supply , installation ,testing & commissioning of following safety equipments for school
-
-
-
a) First aid box with standard item.
1
-
767.05
b) As Foam type fire extinguisher (9 liters)as per IS
1
-
5343.48
c) Floor mounting stand for keeping 4 nos. of bucket 5ft in length and 3ft in height made from 30x 30x4 mm angle iron with welded 4 hooks duly painted
1
-
1900.38
Supplying and fixing of 40 W Solar LED Street light ,with battery box out door type of Havells make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
6
-
23921
Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS
-
-
-
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A
6
-
475
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B
5
-
533
Single light/fan/ex.f/call bell point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-C
2
-
574
subsequent point of group controlWiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
2
-
372
6A Plug on the same board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved
5
-
316
Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS (AKG or any other equivallent reputed make ISI marked as approved) FRLS as required.
-
-
-
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.
15
-
100
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor. (BDB to LSB/LIGHT CKT/5A PLUG)
15
-
118
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.MAKE KINJAL/ AKG
-
-
-
20 MM
2
-
53
25 MM
2
-
59
Supply and fixing modular type indicator on the existing switch box/cover of Anchor make.
1
-
106
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Havells make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection.
1
-
3097
Supplying and fixing of 40 W LED Street light ,WIPRO WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
1
-
2244
Supplying and fixing of 18 Watt LED round Surface Fittings CAT No. LD80-171-XXX-60-SM , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
2
-
2069
Supplying and fixing of 20 Watt LED Tube light Fittings CAT No. CAT No. LL20-281-XXX-65AL1** , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
4
-
1078
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
25
-
37
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge.
-
-
-
3core x 2.5 sq mm copper unarmoured cable.
33
-
141
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate
with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm
long and fixing the same in ground as required.
6
-
361
Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
-
-
-
Cost of European water closet with P trap ( SLICK) of Hindware 20011 (Pastel)
4
-
4574.4
Providing Table Top wash basin size 560mm x 450mm Make hindware having cat no - 10049 with 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
Wash basin size 560mm x 450mm of hindware make having cat no - 10049 PG-24)
8
-
3322
Providing and fixing 15mm dia Bib cock of Parryware of cat no-G3004A1 quality conforming to IS standards.
-
-
-
15 mm nominal bore
15
-
1276
Providing and fixing C.P. brass angle valve for Pillar Cocks long neck .15 mm nominal bore( Hindware Cat No-F730002)
-
-
-
15 mm nominal bore
8
-
1094.2
Supplying all materials, labour, T&P and fixing standard sized (Health Faucet) with double lock 1.0m brass plated flexible hose & wall hook of hidware having cat no - F160002 of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
5
-
2102.8
Providing and fixing 15mm dia CP angle stop cock of Hindware having cat no - F370006 approved make including all cost of materials complete as per PH specification.
17
-
2031.6
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
-
2191.5
Supplying and fixing standard sized CP soap case ( Cat no- F840004)Hind ware type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
15
-
1408.6
Providing and fixing Stainless Steel kitchen sink Parryware (Cat no-C855371) with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink
2
-
6748.1
Providing 15 mm dia Sink cock of Hindware having cat no - F210024 as per IS : 13983 and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
2
-
2105.5
Providing and fixing Urinal of Hindware of cat no-60005 quality confirming to IS Standards.
3
-
2064.7
Providing and fixing S.S grating .
15
-
644.6
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC pipe Conforming to IS:15778/2007(SDR 13.50), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the
walls etc.
-
-
-
20 mm dia
28
-
620
32 mm dia
45
-
1174.8
40mm dia
22
-
1544.9
40mm dia TEE
15
-
50.61
40mm dia Elbow
27
-
33.17
32mm dia TEE
18
-
69.12
32mm dia Elbow
18
-
56.03
20mm dia TEE
26
-
32.61
20mm dia Elbow
30
-
29.9
Supplying all materials, labour, T&P, fitting and fixing of PVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge.supreme rate moulded fittings
-
-
-
100mm dia TEE
10
-
169.92
100mm dia bend 45
8
-
102.61
100mm dia Cowl
5
-
40.4
100mm clip
11
-
20.65
75mm dia TEE
12
-
86.14
75mm dia bend 45
15
-
83.25
75mm dia Cowl
5
-
26
Providing and fixing gun metal gate valve of approved quality (screwed end) :
-
-
-
25mm Dia
10
-
1796.3
32mm Dia
8
-
2740.9
Cutting holes up to 30x30 cm in walls including making good the
same:
-
-
-
With common burnt clay F.P.S. (non modular) bricks
22
-
186.9
Cutting holes up to 15x15 cm in R.C.C. floorsand roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
15
-
151.8
Supply and fixing PVC ' S ' deep trap wherever required or nanhi trap self cleansing design including jointing to waste pipe with or without vent and with CP grating 150mm nominal size square for nanhi traps, 100mm diameter of the inner hinged round grating for deep ' P ' or ' S trap, various inlet from 40 dia to 110 dia and various outlet from 75 dia to 110 dia with the extension boss tee connection at all levels with all necessary materials, labors, scafoldings, tools and tackles, plants etc. complete as per the specification & direction of Engineer-in-charge.
8
-
418.5
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.
-
-
-
Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm)
1
-
66589.4
Syntex Water Tank
-
-
-
2000ltr ( India mart ,Model name-CCWS.200.01, Item Code-87841018)
4
-
15000
EXTERNAL PH WORKS (WATER SUPPLY)
-
-
-
A) Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.
15.45
-
137.4
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
12.45
-
136.9
Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.
3
-
203.3
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC pipe Conforming to IS:15778/2007(SDR 13.50), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the
walls etc.
-
-
-
Cost of pipe 32mm dia
18
-
1174.8
Cost of pipe40mm dia
90
-
1544.9
Supplying all materials, labour, T&P, fitting and fixing of CPVC fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge.
-
-
-
supeme rate moulded fittings ADR-11
-
-
-
32mm dia Elbow
10
-
56.03
32mm dia TEE
5
-
71.56
40mm dia Elbow
6
-
60
40mm dia TEE
7
-
74
Providing and fixing gm gate valves (with cap)complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid Separately
-
-
-
40mm Dia class II
8
-
927
Providing & fixing of gm body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS 780
-
-
-
32mm Dia
8
-
450
Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. (MR)
1
-
650
Supply, installation, testing and commisioning of automatic star delta control panel suitable for 1 HP Shallow well jet pump Single Phase 100 ltr with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the sump with suitable cable etc complete as per the Direction of Engineer-in-charge. (Excluding power supply)( KBL make MR)
1
-
8800
Supply, installation, testing and commisioning of automatic star delta starter with cabling panel suitable for pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the borewell complete as per the Direction of Engineer-in-charge. (Excluding power supply and flat cable for connection with motor)
1
-
4500
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.26
-
137.4
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
In all kinds of soil
1.58
-
203.3
In hard rock
0.68
-
184.6
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.
0.22
-
606.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
0.22
-
4581.3
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in
1.59
-
4677.25
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works above plinth level upto floor V level
-
-
-
Slab
0.66
-
9365.8
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Roof Slab
0.66
-
7096.53
well sink with top and bottom cover of min 50 mm thk.
16
-
670
SEPTIC PIT
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
18.46
-
137.4
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
In all kinds of soil
12.92
-
203.3
In hard rock
5.54
-
184.6
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
3.39
-
606.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
0.34
-
4581.3
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in
2.48
-
4677.25
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works above plinth level upto floor V level
-
-
-
Slab
0.5
-
9365.8
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Roof Slab
0.51
-
7096.53
well sink with top and bottom cover of min 50 mm thk.
14
-
670
Piping interlocking with all fittings and accessories
24
-
450
12 mm cement plaster of mix :.
-
-
-
1:4 (1 cement: 4 fine sand)
3.39
-
137.2
15 mm cement plaster on the rough side of single or half brick wall of mix :
3.39
-
137.2
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
In all kinds of soil
6.35
-
137.4
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
0.64
-
606.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
0.64
-
4581.3
Fly ash Brick masonry(25X12X8)cm in Cement Mortar(1:6) using bricks strength 75kg/sqcm
2.19
-
4227.6
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
Slab
0.4
-
4917.7
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in Ground Floor
-
-
-
Thermo-Mechanically Treated bars
0.01
-
7096.53
12 mm cement plaster of mix :.
-
-
-
1:4 (1 cement: 4 fine sand)
6.3
-
137.2
15 mm cement plaster on the rough side of single or half brick wall of mix :
14.21
-
137.2
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
In all kinds of soil
3.3
-
137.4
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
0.41
-
606.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
0.41
-
4246.8
Fly ash Brick masonry(25X12X8)cm in Cement Mortar(1:6) using bricks strength 75kg/sqcm
1.4
-
4227.6
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
Slab
0.31
-
4917.7
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in Ground Floor
-
-
-
Thermo-Mechanically Treated bars
-
-
-
Beyond 1.50mtr Depth
0.01
-
7096.53
12 mm cement plaster of mix :.
-
-
-
1:4 (1 cement: 4 fine sand)
3.96
-
137.2
15 mm cement plaster of mix :.
8
-
137.2
SEWERAGE PIPE LINE TRENCH
-
-
-
Cost of Pipe 100mm
50
-
351
Cost of Pipe 75mm
60
-
288
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
In all kind of soil
18.6
-
137.4
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
15.45
-
606.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size).
3.15
-
4581.3
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
Inside size 910mm x 910mm x 910mm
4
-
14492.9
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements