Odisha Primary Education Programme Authority Tender

Brick work (1:6)

CC (1:2:4) for DPC

16mm cement plaster 1.6 over brick work to inside walls.

Providing, supplying fitting of wall panneling cup board drawer design shelves.

Providing, supplying fitting of Conferrence Table with 19mm thick BWR Plywood

Supply fitting and fixing of two track sliding window of approved make with 6mm glass of approved quality with all fitting and fixures.

Supply fitting and fixing of Door of approved make with 6mm glass of approved quality with all fitting and fixures.

Wall painting two coats with 100% acrylic emulsion paint(1st quality) exterior grade of approved make and shade manufactured by reputed manufacture like nerolac/Asian/Berger/Dulax or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and stagging charges including cost,conveyance,taxes of all materials,cost of all labour T&P sundries etc, as required for the work. (for out side)

Synthetic enamel painting two coats over a coat of primer as per the direction of the Engineer in charge.

Fixing tiles in dados skrting on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tile.

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete including cost of precast TILES.

FIRST FLOOR:-R.C.C. WORK. Providing, lifting, hoisting laying Reinforced cement concrete of M20grade in column footings s per approved designs and drawings having a minimum compressive strength ( in work test) 200 kg/Square cm. in 15 cm cubes at 28 days afterr mixing and tests conducted in accordance with I.S. 416 using 12 mm to 20 mm size black hard crusher broken grantie stone chips of approved quality from approved quarry washed and cleaned (20 mm size not to exceeds 25%) to be mixed in concrete mixure with ordinary portland cement (OPC) includin ghosting, lowering, lying and compacting concrete by using vibrators, watering andcuring for 28 days centering and shuttering and finishing the xposed surface mooth providing grooves of beads wherever necessary including cost. conveyance, loading and unloading , royaliies and teaxes of all materials and cost of all labours , sundries , T &P, required for the work etc. complete in all respect excluding cost and conveyance of HYSD/Ms steel and binding wires and labour charges for straihtaining, cutting, bending etc. of M.S rods of for steel and binding wires and lying the grils and placing in poper postion.--COLUMN

Rigid smooth centering for RCC works includingfalse work and dismantling them after casting RCC Column

Lintel beam

Roof beam and middle beam

Roof Slab and Chajja

REINFORCEMENT:--Cold twisted steel reinforcemtn for RCC work including cutting bendingstragntening and binding with 18swg black annealed wire and placing in posting complete.

BRICK WORK(1:6):-CB brick masonay in cemnet mortar of (1.6) with portland slag cement , watering and curing etc. including cost, conveyance, loading and unloading, royalities and taxes of all materials and cost of all lbaour sundries T& P required for the works etc complete in all respect as directed by the Enginner -in-charge.--250 thick wall

CEMENT PLASTER:-Providing and laying cement plaster on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge --12MM CP (1:6) OUTSIDE SURFACE

16mm cement plaster 1.6 over brick work to inside walls.

GRADING PLASTER:--Providing and laying 25 mm thick grading plaster with CM(1:2:2) and mixture with water proofing compound of ISI mark @ 2 Kg/ beg over roof slab after chipping the same and cleaning the surface by brushing, watering and curing etc. complete as per drawing design and instruction of EIC.

MS DOORS & WINDOWS:-Providng fitting and fixing of M.S.Door frame with integrated grill shutter as per the following design and specificaiton.

b. Providing and painting two coats of synthetic enamel paints over a coat of primer to steel work including sand papering, scaffolding , cost of conveyance, taxes of all materials. T & P labour required to complete the work as per design/ drawing & instruction of Architect/ Engineer-in- charge.

Finishign walls with Distemper of approved shade on new work 2 coats to give an even shade inclduing cost of brushes and putty inclduing cost of paint( per one Sq. Mtr)(for inside)-Distemper

Wall painting two coats with 100% acrylic emulsion paint(1st quality) exterior grade of approved make and shade manufactured by reputed manufacture like nerolac/Asian/Berger/Dulax or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and stagging charges including cost,conveyance,taxes of all materials,cost of all labour T&P sundries etc, as required for the work. (for out side)

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete including cost of precast TILES.

Supply fitting and fixing of two track sliding window of approved make with 6mm glass of approved quality with all fitting and fixures.