Odisha Primary Education Programme Authority Tender

Providing and laying in position cement concrete of grade 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level :

Providing and fixing at or near ground level precast cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in kerbs,edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoRT&H Specifications for Road & Bridge works (4th Revision)

Periferial pathway and inside pathway

Painting two coats with Weather coats of approved shade on new/ old work including cost of paint in boundary wall.

circular gate

Grassing with ‘Selection No. 1’ grass including transplanting the Grass with 75 mm spacing on either side, watering and maintenance of the lawn as required (during initial development of 15 days or more, watering is to be done every day) till the grass forms a thick lawn free from weeds and fit for mowing, including watering and maintenance of the lawn as required etc. for a period of one year after planting, all complete.

Supply and fixing of 80W LEDStreet light fitting [Model- CGL Model – Achilles ( LFBX11-70-CDL) or equivalent ] made out of cast alluminium housing with lence & IP 65 protection. (MAKE - BAJAJ /Phillips/Crompoton) for illumination including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge.

Supply and laying of size 4 core x 16 sq.mm PVC insulated PVC sheathed armoured underground aluminum cable including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge.

Supply and laying of size 3 core x 6 sq.mm PVC insulated PVC sheathed armoured underground aluminum cable including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge.

Supply and laying of size 3 Core x 1.5 sqmm PVC insulated PVC sheathed Copper Flexible cable including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge.

Cable trenching in all type of soil excepting rocky soil including excavation of earth with supply of 50mm HDPE pipes laying & filling of sand and loose earth to the original ground level with surface dressing after laying of various sizes of cables inside the trench and removal of surplus earth to a lead up to 5 KM.

G.I. earth pipe electrode with salt and charcoals: Earthing with G. I. earth pipe 3 Mtrs. long 40mm dia of ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required as per the direction of the Engineer-in-Charge. (with Charcoal and salt)

(i) Neon Indicator - 3 nos. (ii) Ring Copper Socket - 3 nos. (iv) Toggle Switch - 3 nos. (v) 40 Amp Contactor - 3 nos. (vi) 63 Amp Kit Kat - 3 nos. (vii) Brass Bus Bar - 3 nos. (viii) 3 phase 63 Amp MCB - 3 nos. (ix) Stud Connector - 3 nos. (x) 32 Amp Rotary Switch- 4 (x) Danger Board - 1 no. with complete wiring with 10sq.mm / 4sq.mm / 2.5sq.mm copper wire as per direction of the Engineer- in- charge.

Providing and fixingin position Double Bar of approved design and making minimum Area 2.00mx3.5m (Safe play Area minimum 2.5mx4.0m) consisting of pair of horizontal bar(40NB GI Pipe ,25NB GI pipe apacer each supporting legs /Anchoring Arm of playing instruments with foundation angle /base base plate /tor rod etc in 1:1.5:3 grade concrete block pit curing etc complete.

Providing and fixingin position SHOULDER TWIRL of approved design and make minimum product size 2MX0.9M (safe playing area 3.0mx1.9m) consisting of 1.CIRCULAR RING :(25NB GI Pipe bend to form ring with provision of handled for rotating the ring ). 2.SPOKE (25nb gi PIPE with 40NB connector with bearing 3. MAIN SUPPORT 25 NB GI pipe with 40 NB connector with bearing 4. All open end pipes been closed by GI /HDPE caps including fixing each supporting leg/anchoring arm Gym equipment with foundation angle/base plate /tor rod etc n 1:1.5:3 grade concrete block pit

Providing and fixing in position Double post Swing of approved design and make of minimum 3.5m X 1.0m size ( Safe Play area minimum.4.5m X 2.0m) consisting of 1. VERTICAL SUPPORT (100NB GI Pipeconforming, Pipe length 2955mm, foundation plate 300X300X10 for the vertical pipe , and a profile plate of 150X50X5 to fix the top pipe with vertical pipe), 2. TOP PIPE (50NB GI Pipe,Pipe length 2955mm, profile plate of 150X50X5 welded on both ends of the pipe to fix the top pipe with vertical pipe), 3. CHAIN (Rubber dip molded swing chain of dia.6mm & 1450mm Long), 4. S-HOOK(dia 8mm & 145x130 Triangular hook of SS 304 Grade), 5. RUBBER SEAT (Molded anti skid Rubber Seat tested for rubber hardness as per Shore Durometer Type A scale conforming ASTM D2240 having value of approx. 50), 6. FOUNDATION ANGLE (40X5 of length 900mm conforming to standards IS-808-1964 and 10mm tor rods ), Including fixing each supporting leg / anchoring arm of playing instrument with foundation angle/base angle/ base plate/tor rod etc. in 1:11/2:3 grade concrete block of 0.45 x 0.45 x 0.45 m size excavation for concrete block pit, curing etc. all complete.

Providing and fixing in position FRPMerry Go Round (MGR) of approved design and make of minimum area 1.8meter dia, (Safe Play area minimum 3.0m dia),over all minimum 900 mm height from ground consisting of 1. FRP PLATFORM (Minimum 5MM Thick, 1800 mm dia with checkered texture) 2. PLATFORM SUPPORTING (structured frame of IAS- 40x40x5 & 25x25x5,ISF-130x50x10 & 65x50x5 welded together, Triangular frame. OF 75x40x5 C channel), 3. CENTER SUPPORT (80NB 500 mm long GI pipe with 150x150mm base plate ,with Ball Bearing no. 6209Z and Taper Roller Bearing no. 30209) 4. RAILLING OVER PLATFORM (3 nos 20NB GIPipe with GI Railing frame conforming to EN 1176-1:1998 Including fixing each supporting leg / anchoring arm of playing instrument with foundation angle/base angle/ base plate/tor rod etc. in 1:11/2:3 grade concrete block of 0.45 x 0.45 x 0.45 m size excavation for concrete block pit, curing etc. all complete.

Providing and fixing in position Double Bar of approved design and make of minimum Area of 2.0 m x 3.5 m (Safe Play Area minimum 2.5 m x 4.0m), consisting of pair of horizontal bar (40NB GI pipe with end cap) 4 nos vertical supports( 40NB GI Pipes,25 NB GI pipe spacer for each two vertical pipes.) Including fixing each supporting leg / anchoring arm of playing instrument with foundation angle/base angle/ base plate/tor rod etc. in 1:11/2:3 grade concrete block of 0.45 x 0.45 x 0.45 m size excavation for concrete block pit, curing etc. all complete.

Providing and fixing in position Spiral Scrambler of approved design and make of minimum area 1.4 m x 0.6 m (Safe Play Area minimum 2.4 m x 1.6 m.) and minimum over all height of 2.7m from ground consisting of 1. CENTER FRAME (40NB GI Pipe bend and fixed over the foundation angles, 20NB Spacer pipes), 2. COIL (Spiral shape bend structure made from 25NB GI pipe attached to centre frame with the 20NB GI spacer, 15NB GI Support pipes fixing to the foundation angles Including fixing each supporting leg / anchoring arm of playing instrument with foundation angle/base angle/ base plate/tor rod etc. in 1:11/2:3 grade concrete block of 0.45 x 0.45 x 0.45 m size excavation for concrete block pit, curing etc. all complete.

FRP Benches

DUST BIN