Odisha Mining Corporation Limited Tender

Supply and fixing of Manual calling bell including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of step type ceiling fan regulator including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 1200 mm sweep size BEE 5 star rated BLDC celing fan with 220 CMM air delivery at 28 watt , power factor 98% at full load, volatge range 90 V- 300V including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 250 mm, 55 watt exhaust fan with 5 blades 1300 rpm speed including all accesories and connection as per direction of Engineer in Charge.

Supply, Installation, Testing and Commissioning of 90watt LED 120 lm/Watt Street Light energy saving & environmental friendly long life versatile pressure die-cast aluminum IP66 roadway luminaries with high power LEDs as light source and electronic drive including bend pipe all accessories and connection as per direction of Engineer in Charge.

Supply and fixing of 18 watt, 6000K T5 led light including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 9 watt, 3000K led bulb and angle holder including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 2+10 way SPN double door MCB distribution board with sheet steel enclosure complete with tinned copper busbar, earth bar , din bar, detachable gland plate, interconnections, phosphate and powder painted including earthing and all accesories and connection as per direction of Engineer in Charge.

Supply, installation, testing & commissioning of floor mounting front operated front access extensible type double door cubicle outdoor panel, IP-67 ,totally enclosed, dust and vermin proof with IP-66 protection with hinged and lockable doors. CRCA sheets (16 SWG) including Busbars, interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 25 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge. MAIN PANEL Incoming : 125A 4P MCCB (36kA) - 1 No with extended rotary handle-1 No and Spreader Terminal-1 set (Set of 8), with Extended ROM and Operating Handle - 1 set Outgoing : 63 A DP MCB(B-Curve) -9 Nos Instrument : Multifunctioning meter- 01 no, R-Y-B LED Indicating lamp -6Nos 6Amp SP MCB, 10KA (B-curve)-3 No Aluminium bus bar of proper rating,s with Internal wiring. The panels shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.

Supply, installation, testing and commisioning of 63Amp ICDP Main switch(IS-13940 PART 3/1993) on surface and complete with HRC fuse links, interconnections, earthing etc as required as per direction of Engineer in Charge.

Supply and fixing of 63 Amp rating 240 Volt B- series DP MCB for lighting and other loads as required including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 32 Amp rating 240 Volt B-series DP MCB for lighting and other loads as required including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 16 Amp rating 240 Volt B-series SP MCB for lighting and other loads as required including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 10 Amp rating 240 Volt B-series SP MCB for lighting and other loads as required including all accesories and connection as per direction of Engineer in Charge.

Supply and Laying of 3.5 core 35 sq mm 1.1KV Aluminium XLPE armoured cable under ground in trench of depth 500mm X 150mm with sand coutioning and brick laying including all accessories ,materials as required as per the direction of EIC.

Recessed wiring to submain in 2x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.

Supply and connection of 10 Sqmm fexible copper cable from earth pit to panel board including saddle and including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of chemical earthing 3000 mm long copper bonded earthhing electrode with chemical filled compound 40mm dia with inner strip 25x3 including excavation of earth pit with highly conductive back filled compund of 2x25kg , brick work in cement mortar masonary work with rcc slab for earth pit chamber of size2'x2' including all accessories, labour cost, t&p etc complete work as per direction of EIC. (Earth value of the earthing should be 2 ohms)