Odisha Mining Corporation Limited Tender

Supply and painting of black paint including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 33 kV 400 Amp 3 pole AB switch (Type tested) with 100x50x6 mm- 4 Mtr long MS Channel(2 nos) for mounting arrangement,100x50x6 mm- 2 Mtr long MS channel(2 nos) for cantilever arrangement & 50x50x6 mm- 2 Mtr long MS Angle(2 nos) for cantilever arrangement including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 33 kV 400 Amp 3 pole Drop Out type fuse set with 100x50x6 mm- 4 Mtr long MS Channel(2 nos) for mounting arrangement,100x50x6 mm- 2 Mtr long MS channel(2 nos) for cantilever arrangement & 50x50x6 mm- 2 Mtr long MS angle(2 nos) for cantilever arrangement including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 100x50x6 mm , 4 Mtr x 2 nos pressure channel of MS including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 75x40x6 mm ,4 Mtr x 2 nos bracing channel of MS including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 50x50x6 mm, 6 Mtr x 2 nos DP bracing angle of MS ,including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply, installation & commissioning of HT stay set (complete) with stay insulator, stay clamp,7/8 SWG GI stay wire (12Kg/ Stay) ,concreting of stay with set (1.65mtr x 0.3 mtr x 0.3 mtr= 0.1485cum) in PCC (1:2:4)including earth excavation work including excavation work, all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of GI nut bolt and washer including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 33 kV LA(Type tested), 30 kV-10 kA lightning arrester including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of chemical earthing 3000 mm long copper bonded earthhing electrode with chemical filled compound 40mm dia with inner strip 25x3 including excavation of earth pit with highly conductive back filled compund of 2x25kg , brick work in cement mortar masonary work with rcc slab for earth pit chamber of size2'x2' including all accessories, labour cost, t&p etc complete work as per direction of EIC. (The earth value of the earthing should be 2 ohms)

Supply and laying of 50 sq. mm single core Copper XLPE insulated cable for earthing including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of b&s type 90 kN 4 bolted hardware fittings including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of b&s type 90 kN porcelain disc insulator including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 33 kV porcelain pin insulator with 33kv GI pin including all accessories , labour cost, t&p etc complete work as per direction of EIC.

Supply and drawl of 80 sq. mm AAA conductor including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of limit switch with isolator handle, 1.5 Sq mm 2 core copper flexible cable, shunt coil etc required including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and drawl of 400 sq. mm 3.5 core, XLPE insulated aluminum armored cable with DC glands at both end including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 40x6mm GI flat for neutral including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of 100x116 mm 4mtr long RS joist pole with concreting the base for resting of LT cable including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply and fixing of Outdoor type ONAN 250kVA BIS Level-II, Type Tested,33/0.415 kV, Dyn-11, CRGO Core (Minimum Flux Density 1.6T), Copper winding with press board & Craft paper Insulation, 50Hz, Guranteed total loss 3150W (Maximum) at 100% of Load, % Impedance 4.5 +/- 10% at 75 degree Centigrate, distribution transformer with Off load tap changer , Buchhlotz Relay, Expolision Vent, Drain Plug, Radiator etc as per detail specification attached in SBD including all accessories, labour cost, t&p etc complete work as per direction of EIC.

Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle double door outdoor panel totally enclosed, dust and vermin proof with IP-66 protection with hinged and lockable doors. CRCA sheets (16 SWG) including Busbars, interconnections, tinned copper crimping lugs, bonding to earth and powder coated painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 25 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.: MAIN PANEL with 630A 4P MCCB (36kA) with rotary handle - 1 No, 50kA SPD Type-I+II- 1 No., 100Amp 4P HRC Fuse Base with fuse-1 Set as incoming, 400A 4P MCCB (36kA) - 2 Nos., 250A 4P MCCB (36kA) - 2 Nos, 63A 4P MCCB (36kA) - 2 Nos., as Outgoing and 3 Nos 800/5A CT, Digital Multifunction Meter and 800A Aluminum Bus Bars sleeve covered. All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used.

Sundries for survey, bush cleaning, consumables like pvc tape,ampere tape,small size nut & bolt, socket etc prepartaion of drawing, printing , display of sld and sop including all accessories, labour cost, t&p etc complete work as per direction of eic.

Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand with PO box sheded bucket for Electrical fire protection as per standards of Electrical Inspectorate including all accessories ,materials as required as per the direction of EIC.

Supply and fixing of 250x200 mm Danger plate of 33kV & 415V including all accessories ,materials as required as per the direction of EIC.

Civil Work for Transformer Plinth Earth work Excavation of Transformer Foundation trenches in laterite rock including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Filling foundation and plinth with sand wel watered and rammed including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

PCC (1:3:6) using 40mm size hand broken metal including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Fly ash brick masonary in cm (1:6) in F&P including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

RCC M-25 grade concrete using 20mm down graded chips including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supplying HYSD bars including cutting and bending including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

12mm thick cement plaster (1:4) including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Painting two coats with weather coats with weather coat cover a coat of primer including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Civil Work for Sub-station Earth work in all kinds of soil (Avg. of ordinary soil, hard soil, stony earth and gravel mixed with stone & boulder & disintigrated rock not requiring blasting) including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Filling foundation and plinth with sand wel watered and rammed including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

PCC (1:3:6) using 40mm size hand broken metal including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

PCC (1:2:4) using 20mm down graded chips including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supply, fitting & fixing of MS angle of size 65X65X6 mm thick including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supply, fitting & fixing of chain link fencing including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Painting two coats with weather coats with SE paint over a coat of primer including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Spreading of 40mm size metal including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.