Odisha Mining Corporation Limited Tender

Supply, Installation & comissioning of GI Back Clamp for V Cross Arm (0.85Kg each) including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply, installation and commissioning of 11kV Pin Insulator (Polymer Type) including all accessories, labour cost, T&P etc. complete work as per direction of EIC.

Supply, installation and commissioning of 11KV single tension H/W fitting (T&C) 45 KN, 3 Bolted including all accessories, labour cost, T&P etc. complete work as per direction of EIC.

Supply, installation and commissioning of 11KV Disc insulator (T&C) 45 KN polymer including all accessories, labour cost, T&P etc. complete work as per direction of EIC.

Supply, installation and commissioning of HT Stay set(Complete), HT Stay Insulator (Polymer Type), HT stay clamp(1.95Kg/Pair), 7/10 SWG Stay Wire 12Kg/Stay and concreting of stay (1.65 Mtrx0.3 Mtrx0.3 Mtr =0.1485 Cum - PCC 1:2:4)including all accessories, labour cost, T&P etc. complete work as per direction of EIC.

Supply, installation and commissioning of 100 sq.mm XLPE insulated 11kV Single core AAAC(Unarmoured) aluminium conductor including all accessories, labour cost, T & P etc. complete work as per direction of EIC.

Supply, Installation & comissioning of PG Clamp for 100 Sq mm AAAC including all acessories , labour cost, T & P etc. complete work as per direction of EIC.

Supply and fixing of chemical Earthing of with 3mtr long 40mm dia chemical filled comound and GI earth electrode including excavation of earth pit with highly conductive back filled chemical compund of 2 x 25kg , brick work in cement mortar masonary work with removable cover for Earth pit chamber of suitable size including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply, Installation, Testing and Commissioning of GI channel of size 100x50x6 mm (9.2 Kg/Mtr) including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply, Installation, Testing and Commissioning of GI channel of size 75x40x6 mm (6.8 Kg/Mtr) including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply, Installation, Testing and Commissioning of GI Angle of size 50x50x6 mm (4.5 Kg/Mtr) including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply, installation and commissioning of Earthing of Support (Coil type) including all accessories, labour cost, T&P etc. complete work as per direction of EIC.

Supply and fixing of GI Nut, Bolt and washer of different sizes as required including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply, installation and commissioning of 11kV Danger Board in accordance with Rule No. 20 of CEA Regulation-2023, the minimum size of plate 250x200mm made up of mild steel sheet of 1.6mm thick and vitreous enameled white, with letters, figures and the conventional skull & cross-bones in signal red colour on the front side (The rear side of the plate shall also be enamelled in white colour). The language of the danger board should be of English & Odia and the size of letters in each language and spacing between them shall be so chosen that these are uniformly written. The corners of the plates shall be rounded off and the location of fixing holes shall be such that it shall be bolted through pole clamp. for each support including all accessories, labour cost, T&P etc. complete work as per direction of EIC.

Supply, Installation & comissioning of GI Back Clamp for Danger Plate including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply, Installation & comissioning of Anti Climbing Device made of GI barbed wire,Clamping arrangement etc.(2kg Per Support) including all acessories , labour cost, T & P etc. complete work as per direction of EIC.

Supply, Installation & comissioning of 11KV, 3-pole, 400Amp Air Break switch, vertical down rod, channel holding the vertical down rod, earth connectivity of fixed and movable part of down rod including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply, Installation & comissioning of 11KV, 3-pole, 400Amp Horn Gap type Fuse set unit including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply, installation and commissioning of 12kV, 10kA Lightning Arrester (Polymer Type)including all accessories, labour cost, T&P etc. complete work as per direction of EIC.

Supply, Installation & comissioning of 25X6 mm GI insulated flat including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply, Installation & comissioning of 50X6 mm GI insulated flat including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply, Installation & comissioning of No.-6 SWG GI Wire for Guarding including all acessories , labour cost, T & P etc. complete work as per direction of EIC.

Supply and fixing of Aluminum cable socket of different sizes including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply,installation and commissioning of 500 KVA ,11/0.433KV, Outdoor type, Dyn-11 with Off Load Tap Changer , 50Hz, 3-Phase, as per IS 1180, BIS efficiency Level – 2 (Amd-4) ,Copper wound Transformer with following Specifications:- 1. Tap Range -10% to +10% in Steps of 2.5%, 9 Positions 2. Temperature Rise (oil/Winding/Ambient)-40/45/50 deg C 3. % Impedance at 75 deg C -6.25 % and all other standard accessories like Rating and Terminal marking plate, two earthing terminals, pressure release device with trip contact, Oil filling hole with cap, Oil level Indicator, , Dehydrating Silicagel breather (Min. 2 Kg Silica Gel), Thermometer pocket, Filter and drain Valve, Jacking pads & Ligting Lugs, Detachable type coolong radiators, Widing Temperature Indicator (WTI), Oil Temperature Indicator (OTI), Buchhloz Relay, Transformer Oil as per IS-335, Terminal Arrangement (HV-Outdoor Bushing), LV- Cable Box), including all accessories, labour cost, T&P etc complete work as per required technical specification and check list provided at Annex-1 in SBD and as per direction of EIC.

Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle Single Door panel totally enclosed, CRCA sheets (16 SWG) including Busbars, interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 50 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.: MAIN PANEL, Incoming:-(i) 1000Amp,4P,50KA, ACB 415V Microprocessor based Release Electrically Operated Fixed type ACB, EF(L&K -SL95593) - 01 no. (ii) 50kA, Type-1+2, 3P+N SPD (L&K-AUSP123PN50) - 01 Set (iii) 63 Amp, 4P, HRC Fuse link for open execution with Extended ROM and Operating Handle (L&K FN63FP-SK95421) - 01 Set. (iv) 63 Amp, DIN type HRC Fuse (Suitable for L&K FN63FP-SF94027) -04 Nos. (v) 630Amp, 4P, 415V, Manual Changeover with Operating Handle kit(L&K -CO46300OOOO)- 01 Set Instrument:- (i) Multifunction meter CL-1.0 (I,V,KW,KVA, KWH, KVAH) (L&T) - 01 no., (ii)1000/5A CT, C.L. 1.0, 15VA; Make-KAPA - 04 Nos. (vi) R-Y-B LED Indicating lamp 220/240V AC(L&T) -03 nos. (vii) 6Amp SP MCB, 10KA, B-curve (L&T) -03 nos. Outgoing:- (i) 630Amp,4P,36KA 415V MCCB(L&K -CM94106OOT1OG) with extended ROM & Spreader Link -02 Nos. (ii) 250Amp,4P,36KA 415V MCCB(L&K-CM92109OOP1OG) with extended ROM & Spreader Link- 03 Nos. (iii)160Amp,4P,36KA 415V MCCB(L&K-CM92108OOM1OG) with extended ROM & Spreader Link- 05 Nos. (iv) 100Amp,4P,36KA 415V MCCB(L&K-CM92108OOL1OG) with extended ROM & Spreader Link- 08 Nos. (v) 32Amp C-curve DP MCB, 230V- 06 Nos. etc as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC. The SLD, GA and Technical Specifications should be approved by EIC before execution.

Supply and Laying of 1.1kV, 1.0 Core, 400 Sq mm, Aluminum, XLPE Insulated armoured cable including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge. (20 Mtrs of Cable Run, 2 Runs per Phase & Neutral)

Supply and Fixing of End Termination for 1.1kV, 1.0 Core, 400 Sq mm, Aluminum, XLPE Insulated armoured cable with suitable size cable lugs and double compression cable gland including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate including all accessories ,materials as required as per the direction of EIC.

Supply and fixing of shock treatement chart (Language-Odia, Hindi & English) with OMC Logo duly laminated to be fixed in Electrical control panel room including all accessories ,materials as required as per the direction of EIC.

Supply and fixing of colour single line diagram of total Installation with OMC Logo duly laminated, to be fixed in Electrical control panel room including all accessories ,materials as required as per the direction of EIC. Before printing, it shold be duly approved by concerned Engineer & EIC-Electrical, Barbil Region.

Supply and fixing of CO2 Fire Extinguisher 4.5kg with mounting clamps with pressure test certificate, including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of ABC Dry Chemical Powder Fire Extinguisher 5kg with mounting clamps with pressure test certificate, including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 11kV Rubber mat of size 1 Mtr X 2 Mtr with Test Certificate including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of Lepose Wall mounted Metal Fast Aid Box/ Emergency Medical Kit of multipartion including medicines etc, all accesories and connection as per direction of Engineer in Charge.

Sundries for survey ,tree cutting, small size nut & bolt with washer , Aluminum Binding Tape, Dismantling of existing structure if any etc including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supply and Laying of 6.6/11kV, 3 Core, 95 Sq mm, Aluminum, XLPE Insulated armoured cable in existing Trench including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supply, Installation, Testing and Commissioning of Heat Shrinkable type Outdoor termination kit suitable for 11kV, 3 Core, 95 Sq mm, Aluminum, XLPE Insulated armoured cable including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply, Installation, Testing and Commissioning of Heat Shrinkable type Indoor termination kit suitable for 11kV, 3 Core, 95 Sq mm, Aluminum, XLPE Insulated armoured cable including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply and Fixing of Heavy Duty HDPE pipe of 160 mm dia including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply and Laying of 1.1kV, 10.0 Core, 2.5 Sq mm, Copper, PVC Insulated flexible Control cable with PVC conduite as required including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge .

Supply and Construction of Masonary Cable Trench of inner size 350x350mm with RCC slab covering of appropriate size and filling the trench with fresh sand including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supply and Construction work of plinth of Distribution Transformer upto a capacity of 1000kVA including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supply and Construction work of MS Gril Boundary of Substation yard (30'x20'x8'8"). (SCOPE OF WORK : 1. Earthwork excavation in all kinds of soil, 2. Earthwork in excavation other than granite, 3. PCC (1:4:8), 4. Sand filling, 5. Fly ash brick masonary (1:6) in F&P, 6. 16mm plaster in (1:6), 7. CC(1:2:4) on Foundation top, 8. MS grill & MS Door, 9. 60 mm Metal Sprading In Substation area, 10. Provision of two coats enamel paint over a coat of primer on MS grill & MS Door, 11. Provision of two coats weather coat over a coat of primer on plaster and 12. Providing & Fixing Radium Reflective Tape). Including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.

Supply & Construction of cubical room(12'x12'x10'). (SCOPE OF WORK : 1.RCC roof, 2. One No. sheet mrtal double door, 3. One No. sheet metal window, 4. 3' wide plinth protection with steps infront of door as required. Internal wiring with minimum 2 Light Points, 1 Ceiling Fan points, one 16Amp Switch & Socket, 2 Nos. of 6 Amp switch & Socket with 4 way Double Door DB-32Amp DP MCB-1 No as Incomer & 16Amp SP MCB-1 No. & 10Amp SP MCB-1 No as Outgoings.) Including all accessories, labour cost, T@P etc complete work as per the direction of EIC.As per the TPNODL Estimate.

Supply & Construction of control room (20'x30'x12'). (SCOPE OF WORK : 1. RCC roof, 2. Tiles install in floor, 3. One No. sheet metal double door, 4. Three Nos. sheet metal windows with grills, 5. 3' wide plinth protection with steps infront of door as required, Internal wiring with minimum 4 Light Points, 2 Ceiling Fan points, two 16Amp Switch & Socket, 4 Nos. of 6 Amp switch & Socket with 6 way Double Door DB-32Amp DP MCB-1 No as Incomer & 16Amp SP MCB-2 No. & 10Amp SP MCB-2No as Outgoings.). Including all accessories, labour cost, T@P etc complete work as per the direction of EIC. Add in TPNODL Estimate.