Odisha Mining Corporation Limited Tender

Supply and fixing of 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.

Supply and fixing of 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of Projector/ Geyser / A.C socket outlet with 16A plug socket and 16A control switch at nearest separate location including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to submain in 4 x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.

Supply and fixing of 4 way TPN double door, Horizontal type, Three Pole & neutral steel sheet MCB DB, 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required including the following MCBs as Incoming One 32 Amp 4 pole MCB and Outgoing 32 Amp DP RCCB 2 Nos ,10- 16 Amp SP MCB 2 nos including all accessories and connection as per direction of Engineer in Charge.

Supply and fixing of 4 way TPN double door, Horizontal type, steel sheet MCB DB, surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required including the following MCBs as Incoming 63 Amp TPN RCCB 1 nos and Outgoing 32 Amp SP MCB 5 nos, 16-10 Amp SP MCB 2 nos including all accessories and connection as per direction of Engineer in Charge.

Supply and fixing of 8 way SPN double door, Horizontal type, steel sheet MCB DB, surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required including the following MCBs as Incoming 32 Amp TPN RCCB 1 nos and Outgoing 32 Amp SP MCB 2 nos, 16-10 A SP MCB 2Nos including all accessories and connection as per direction of Engineer in Charge.

Supply and fixing of 4 way SPN double door, Horizontal type, steel sheet MCB DB, surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required including the following MCBs as Incoming 32 Amp MCB 1 nos and Outgoing 16-10 Amp SP MCB 2 nos including all accessories and connection as per direction of Engineer in Charge.

Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle double door outdoor panel totally enclosed,type tested, dust and vermin proof with IP-66 protection with hinged and lockable doors. CRCA sheets (16 SWG) including Busbars, interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 25 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge. MAIN PANEL Incoming : 250A 4P MCCB (25kA) - 1 No with extended rotary handle-1 No and Spreader Terminal-1 set (Set of 8), TPN 250 Amp, 415 V,Change-over-01 set with with Extended ROM and Operating Handle - 1 set, SPD 50KA, Type-I+II 3P+N - 1 set, 100Amp 4P HRC Fuse Base with Fuse-1 Set Outgoing : 63 A TPN MCB(B-Curve) -4 Nos, 32 A TPN MCB(B-Curve) -6 Nos, Instrument : Multifunctioning meter- 01 no, R-Y-B LED Indicating lamp -6Nos 6Amp SP MCB, 10KA (B-curve)-3 No Digital Timer Switch-1 No, 4- Pole, 415V, MNX-50 Contactor with 2NO+2NC -1No 40x10 mm Aluminium bus bar, 11KV drum Insulator-12 Nos with Internal wiring. The panels shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.

Supply and fixing of chemical earthing 3000 mm long copper bonded earthhing electrode with chemical filled compound 40mm dia with inner strip 25x3 including excavation of earth pit with highly conductive back filled compund of 2x25kg , brick work in cement mortar masonary work with rcc slab for earth pit chamber of size2'x2' including all accessories, labour cost, t&p etc complete work as per direction of EIC. (Earth value should be 2 ohms)

Supply and Laying of 25 x 6 mm G.I Flat on surface supporting with Epoxy insulator (Minimum Interval 1 Mtr.) as required, including earth excavation as per direction of EIC.

supply and fixing of lightning conductor finial made of 9.2 mm dia 915 mm long Solid Copper having 5 Nos. of spike at top, with Copper base plate mounted on epoxy insulator including all accessories and connection as per direction of Engineer in Charge..

Recessed wiring to LAN point with clip in type modular lan socket (RJ45) ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required as per the direction of Engineer in Charge.

Supplying and drawing UTP 4 pair LAN cat-6 cable in the existing surface / recessed PVC conduit as required as per the direction of Engineer in Charge.

Supply, Installation, testing and commissioning of heavy duty exhaust fan of 250 mm sweep, 1310 rpm in the existing opening,With special blade design for higher suction this lightweight exhaust fan is low on noise and delivers fresh air around.This fan is suitable for any domestic usage. including making the hole to suit the size of the above fan, making good to the damage in complete, connection, etc as required including all accessories and connection as per direction of Engineer in Charge.

Supply, Installation, testing and commissioning of heavy duty exhaust fan of 600 mm sweep, 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good to the damage in complete, connection, etc as required including all accessories and connection as per direction of Engineer in Charge.

Supply and fixing of 24 Watt, 1X1 feet Celing/ surface panel light fitting, Ceiling cutout (284x284) mm, height 23 mm ±1 mm, alluminum die cast housing glare free light LM-80 tested. High voltage protection upto 380 Volt, surge protection upto 2.5 KV IP-20 protected 130 Lm/ Watt edge lit panel. Recess mounted square fixture with opal diffuser and separate electronic driver, Including all accessories ,materials as required as per the direction of EIC.

Supply and fixing of 9 watt mirror light, fixture , glare free light LM-80 tested. High voltage protection upto 380 Volt, surge protection upto 2.5 KV IP-20 protected 130 Lm/ Watt. Including all accessories ,materials as required as per the direction of EIC.

Supply and fixing of 20Watt, batten type 4 ft LED tube light LM-80 tested. High voltage protection upto 380 Volt, surge protection upto 2.5 KV IP-20 protected 130 Lm/ Watt including all accessories ,materials as required as per the direction of EIC.

Supply, Installation, Testing and Commissioning of Minimum 8 Watt LED Bollard Light luminary fitting similar to Make-K-Lite, Model-KL-5568 (As per the GTP attached in the SBD) with base concreting of Bollard (As per the Foundation drawing attached in the SBD) including all accessories and connection as per direction of Engineer in Charge.

Supply and Laying of 3 core 2.5 sq.mm PVC unarmoured Copper Cables in 25 mm HDPE pipe including all accessories ,materials as required as per the direction of Engineer in Charge.

Supply and fixing of Decorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base, LM-80 tested. High voltage protection upto 380 Volt, surge protection upto 2.5 KV IP 66 protected 130 Lm/Watt including all accessories ,materials as required as per the direction of Engineer in Charge.

Supply fixing of 50 watt wall mounted Fan 400 mm, 1360 RPM, Air delivery 65 m3/min , 50Hz frequency, Voltage 220-230 Volt including all accessories and connection, as per the direction of Engineer-in-charge.

Supply and fixing of 5 watt step light alluminum die cast housing glare free light LM-80 tested. High voltage protection upto 380 Volt, surge protection upto 2.5 KV IP-44 protected 130 Lm/ Watt ncluding all accessories and connection, as per the direction of Engineer-in-charge).

Supply and fixing COB light fixture of 7.5 Watt LED Fillament with decorative surface mounting, dome shaped pendent in black finshes glare free light LM-80 tested. High voltage protection upto 380 Volt, surge protection upto 2.5 KV IP-20 protected 130 Lm/ Watt including all accessories and connection, as per the direction of Engineer-in-charge.

Supply,installation, testing and commitioning of Energy efficient 5- star rating inverter model 2 ton split AC, complete with indoor unit (IDU), Outdoor unit (ODU), surface / concealed coper Refrigerant piping with insulation (EP Foam pipe section) IDU to ODU, copper condenser, PVC drain pipe, Remote, Supply voltage rating 230V +10% of 50 Hz, all accessories and connection, as per the direction of Engineer-in-charge.

Supply and Laying of 3.5 core 95 sq mm 1.1KV Aluminium XLPE armoured cable under ground in trench of depth 500mm X 150mm with sand coutioning and brick laying including all accessories ,materials as required as per the direction of EIC.

Supply and Laying of 3.5 core 25 sq mm 1.1KV Aluminium XLPE armoured cable on surface with GI Saddle including all accessories ,materials as required as per the direction of EIC.

Supply and fixing of PVC type, IP-66 300 X 200 X 110 mm 3 phase juction box to be fixed on existing boundary wall including all accessories ,materials as required as per the direction of EIC.

Supply and fixing of 4.5 kg CO2 fire extenguiser with hanging hock, including all accessories ,materials as required as per the direction of EIC.

Supply & fixing of 7 mtr hight internally and externally hot dip galvanised octagonal pole, continously tapered (bolt fixing type) in single section made of 3mm thick HT steel sheet conforming to grade S355JO,E 350, suitable for bracket having top dia 70-75mm and bottom dia 130-150 mm, base plate size 220X220X12 to 240X240X16 mm with door and locking arrangement complete with minimum 1 mtr long MS/GI street light bracket, bakelite sheet,neutral link, suitable MCB or any other electrical accessory,suitable foundation bolts of diameter16 to 20 mm,700mm apprx length, "J" type and civil foundation soil excavation of (1.2x1.02x1.02) mtr,concreating grade 1:3:6 ,RCC.264 CUM, PCC .0780 CUM and sand filling of .078 CUM including all accessores as per direction of EIC. (Detail Drawing of Pole, Pole Foundation has been attached in the SBD)

Supply and fixing of Coil type earthing made up of 6 SWG GI wire of 2.5 mtr long including all accessores as per direction of EIC.

Supply, Installation, Testing and Commissioning of 90watt LED 120 lm/Watt Street Light energy saving & environmental friendly long life versatile pressure die-cast aluminum IP66 roadway luminaries with high power LEDs as light source and electronic drive including with all accessories and connection, all accessories and connection as per direction of Engineer in Charge.

Supply & laying of 3x35+1x25+1x16 sq mm,AL,XLPE insullation AB cable, grade 1.1 KV including all accessories and connection as per direction of Engineer in Charge.

Supply and fixing of LT G.I Bolt & Strap for Shakle Insulator including all accessores as per direction of EIC.

Supply and fixing of 24 watt IP-67 flexiabe LED strip light with colour temperature 3000-3500K .Each strip contains 5 meter of strip with controller & SPD as required including with all accessories and connection, as per direction of Engineer in Charge.