Odisha Mining Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 3,21,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_OMC_103133_2Bid Award Id
ViewTender No
NIT No.22/OMC/CIVIL/2024Tender Authority
Odisha Mining Corporation Limited ViewPurchaser Address
-Website
http://https://omcltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. In Hard Rock Blasting Prohibited
68.8
46247
672.2
Filling foundation trenches and plinth with excavated earth including laying the earth in layers Eacht exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
169.15
28789
170.2
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved qry, laying in layers Eacht exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
165.59
199337
1203.8
Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm Nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved qry including laying in the layers Eacht exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
93.6
585046
6250.5
Providing & laying cement concrete of prop. (1:2:4) in foundation bed and floors using 12mm Nominal size, screened, washed hard black crusher broken granite chips of approved quality & from approved qry including laying in the layers Eacht exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
23.5
181600
7727.7
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Foundation & padestral
55.4
415062
7492.1
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Column in G Floor
15.9
243096
15289.1
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Column in 1st Floor
11.8
200732
17011.2
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Column in 2nd Floor
11.8
225067
19073.5
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Column in 3rd Floor
11.8
254207
21543
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Column in 4th Floor
2.1
51449
24499.6
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Plinth beam
21.64
179888
8312.8
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Roof beam in G. Floor
29.76
455003
15289.1
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Roof beam in 1st Floor
29.8
506933
17011.2
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Roof beam in 2nd Floor
29.8
568390
19073.5
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Roof beam in 3rd Floor
29.8
641981
21543
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Roof beam in 4th Floor
5.6
137197
24499.6
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Lintel beam in G. Floor
1.8
26198
14554.7
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in lintel beam in 1st Floor
3.2
51615
16129.8
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Lintel beam in 2nd Floor
3.2
57649
18015.5
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in Lintel beam in 3rd Floor
3.2
64877
20274.2
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills in lintel beam in 4th Floor
0.1
2297
22976.8
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in Chajja in G Floor
2.48
19557
7886.2
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in Chajja in 1st Floor
2.6
21132
8127.9
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in Chajja in 2nd Floor
3.3
27763
8413.3
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in Chajja in 3rd Floor
3.3
28876
8750.4
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in ROOF SLAB in G Floor
51.63
718756
13921.3
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in ROOF SLAB in 1st Floor
47
722380
15369.8
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in ROOF SLAB in 2nd Floor
47
803892
17104.1
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in ROOF SLAB in 3rd Floor
47.5
911021
19179.4
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in ROOF SLAB in 4th Floor
9.2
199308
21664
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in STAIRCASE in G Floor
4.63
70487
15224.1
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in STAIRCASE in 1st Floor
4.7
79585
16933
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in STAIRCASE in 2nd Floor
4.7
89204
18979.7
R.C.C. work of M-25 having minimum compressive strength of 250Kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. in STAIRCASE in 3rd Floor
4.7
100722
21430.3
Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.). in G Floor
205.55
1787712
8697.3
Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.). in 1st Floor
110.4
963030
8723.1
Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.). in 2nd Floor
110.4
966022
8750.2
Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.). in 3rd Floor
110.4
969168
8778.7
Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.). in 4th Floor
19.2
169125
8808.6
Brick work in Sub-Structure with flyash bricks of size 25x12x8cm in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge Foundation and Plinth.
4
22940
5735
Brick work in Sub-Structure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge Foundation and Plinth.
39.24
215957
5503.5
Brick work in Super-Structure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. In G Floor
47.16
261337
5541.5
Brick work in Super-Structure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. In 1st Floor
160.5
935955
5831.5
Brick work in Super-Structure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. In 2nd Floor
160.5
989514
6165.2
Brick work in Super-Structure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. In 3rd Floor
160.5
1051082
6548.8
Brick work in Super-Structure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. In 4th Floor
48
335520
6990
Fly ash half brick masonry of 125mm thick wall in C.M.(1:3) in all floors having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with with laying of 2nos. 8mm dia. MS bar in every third layer of brickwork for reinforcement with all necessary projections, splays corbelling, cutting, champering, including cost of steel, materials, conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC. in all floor
1057.4
882929
835
Honey comb masonry with 25cm ×12cm ×8cm sizeFly ash bricks having crushing strength not less than 75 kg/cm2 in cement mortrar (1:4) and plastered with 16mm, thick cement mortar (1:6) including white washing 2 coats including cost of all materials, conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per direction of EIC.
11.6
14738
1270.6
12mm (1/2") thick cement plaster (1:6) for finished smooth to inside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in G Floor
234.7
38115
162.4
12mm (1/2") thick cement plaster (1:6) for finished smooth to inside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 1st Floor
339.7
57205
168.4
12mm (1/2") thick cement plaster (1:6) for finished smooth to inside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 2nd Floor
339.7
59345
174.7
12mm (1/2") thick cement plaster (1:6) for finished smooth to inside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 3rd Floor
339.7
61587
181.3
12mm (1/2") thick cement plaster (1:6) for finished smooth to inside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 4th Floor
139.2
26197
188.2
12mm (1/2”) thick cement plaster (1:4) with neat cement punning over brick masonry wall in all floors after racking out the joints including watering and curing etc. complete with cost, conveyance, royalty and cost of all materials and cost of all labour, T&P, required for the work complete as per specification & direction of EIC.
29
6658
229.6
12mm (1/2") thick cement plaster (1:3) for finished smooth to inside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.
14.4
2701
187.6
16mm (5/8") thick cement plaster (1:6) for finished smooth to outside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in G Floor
593.1
136235
229.7
16mm (5/8") thick cement plaster (1:6) for finished smooth to outside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 1st Floor
938.8
220711
235.1
16mm (5/8") thick cement plaster (1:6) for finished smooth to outside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 2nd Floor
938.8
225875
240.6
16mm (5/8") thick cement plaster (1:6) for finished smooth to outside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 3rd Floor
938.8
231226
246.3
16mm (5/8") thick cement plaster (1:6) for finished smooth to outside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. in 4th Floor
568.7
143426
252.2
6mm thick cement plaster (1:4) to RCC surfaces after necessary cleaning and scrapping the RCC surface including watering and curing and cost with cost , carriage of all materials and cost of all labours, T&P required to complete as per direction of EIC. in G Floor
460.8
80593
174.9
6mm thick cement plaster (1:4) to RCC surfaces after necessary cleaning and scrapping the RCC surface including watering and curing and cost with cost , carriage of all materials and cost of all labours, T&P required to complete as per direction of EIC. in 1st Floor
363.3
65067
179.1
6mm thick cement plaster (1:4) to RCC surfaces after necessary cleaning and scrapping the RCC surface including watering and curing and cost with cost , carriage of all materials and cost of all labours, T&P required to complete as per direction of EIC. in 2nd Floor
363.3
66665
183.5
6mm thick cement plaster (1:4) to RCC surfaces after necessary cleaning and scrapping the RCC surface including watering and curing and cost with cost , carriage of all materials and cost of all labours, T&P required to complete as per direction of EIC. in 3rd Floor
363.3
68264
187.9
6mm thick cement plaster (1:4) to RCC surfaces after necessary cleaning and scrapping the RCC surface including watering and curing and cost with cost , carriage of all materials and cost of all labours, T&P required to complete as per direction of EIC. in 4th Floor
30.2
5813
192.5
20mm thick cement plaster (1:4) for finished smooth to inside masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.
6.9
1800
260.9
Kota stone 16mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In Ground floor
39.5
41929
1061.5
Kota stone 16mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In 1st floor
45.4
48918
1077.5
Kota stone 16mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In 2nd floor
45.4
49676
1094.2
Kota stone 16mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In 3rd floor
47.3
52588
1111.8
Supplying, fitting and fixing Kota stone 16mm thick in floors of approved make laid C.M (1:4) & filling joints with tile grout of approved quality and shade including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In Ground floor
372.2
347560
933.8
Supplying, fitting and fixing Kota stone 16mm thick in floors of approved make laid C.M (1:4) & filling joints with tile grout of approved quality and shade including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In 1st floor
277.8
262354
944.4
Supplying, fitting and fixing Kota stone 16mm thick in floors of approved make laid C.M (1:4) & filling joints with tile grout of approved quality and shade including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In 2nd floor
277.9
265533
955.5
Supplying, fitting and fixing Kota stone 16mm thick in floors of approved make laid C.M (1:4) & filling joints with tile grout of approved quality and shade including cost of all materials, labour, all , transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In 3rdfloor
277.8
268688
967.2
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/Sqm including pointing the joints with white cement and matching pigment etc., including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. in ground Floor
(Tiles should be of Kajari/ Somany/ RAK / Johnson)
5.4
4730
876.1
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/Sqm including pointing the joints with white cement and matching pigment etc., including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. in 1st Floor (Tiles should be of Kajari/ Somany/ RAK / Johnson)
55.6
49300
886.7
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/Sqm including pointing the joints with white cement and matching pigment etc., including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. in 2nd Floor
(Tiles should be of Kajari/ Somany/ RAK / Johnson)
55.8
50102
897.9
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/Sqm including pointing the joints with white cement and matching pigment etc., including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. in 3rd Floor (Tiles should be of Kajari/ Somany/ RAK / Johnson)
55.8
50755
909.6
Supplying all materials, labour, T&P and fixing Ceramic glazed wall tile of 300mmx450mm and above size of approved brand and shade in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. in ground Floor
(Tiles should be of Kajari/ Somany/ RAK / Johnson)
29.45
27856
945.9
Supplying all materials, labour, T&P and fixing Ceramic glazed wall tile of 300mmx450mm and above size of approved brand and shade in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. in 1st Floor
(Tiles should be of Kajari/ Somany/ RAK / Johnson)
208.7
200727
961.8
Supplying all materials, labour, T&P and fixing Ceramic glazed wall tile of 300mmx450mm and above size of approved brand and shade in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. in 2nd Floor
(Tiles should be of Kajari/ Somany/ RAK / Johnson)
209.2
204723
978.6
Supplying all materials, labour, T&P and fixing Ceramic glazed wall tile of 300mmx450mm and above size of approved brand and shade in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. in 3rd Floor
(Tiles should be of Kajari/ Somany/ RAK / Johnson)
209.2
208405
996.2
Providing granite flooring with granite tile of 20 mm thick of approved quality and size in kitchen platform including edge moulding and groove cutting etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing including cost, conveyance, loading, unloading and royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in ground Floor
11.3
31364
2775.6
Providing granite flooring with granite tile of 20 mm thick of approved quality and size in kitchen platform including edge moulding and groove cutting etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing including cost, conveyance, loading, unloading and royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in 1st Floor
6.1
16995
2786.2
Providing granite flooring with granite tile of 20 mm thick of approved quality and size in kitchen platform including edge moulding and groove cutting etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing including cost, conveyance, loading, unloading and royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in 2nd Floor
6.1
17064
2797.4
Providing granite flooring with granite tile of 20 mm thick of approved quality and size in kitchen platform including edge moulding and groove cutting etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing including cost, conveyance, loading, unloading and royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in 3rd Floor
6.1
17135
2809.1
Providing and fixing in position WPC frames of size 125mmx65mm to doors fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge in all floor
199.9
226186
1131.5
Supplying fitting and fixing in position 32mm thick flush doorshutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures & partly glazed like Godrej/Dorma make Mortice lock having model no 9168, Godrej/Dorma make floor spring, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. In all floor (Make- Ply & Lamination- Greenply/Archidply/Mayur)
94.05
1003381
10668.6
Supplying,fitting.fixing of FRP doors shutter with choukath and all type of required hard ware fitting of approved make shade and design complete includin cost, conveyance of all materials, cost of all labour,T P required for the work etc.required to complete as per direction of EIC. In all Floor (Make: Darwaja / Rajshree / Krishna)
50.05
261381
5222.4
Providing and fixing of swing door of approved make to be fabricated from roll formed sections made of pre- painted steel ( base steel as per IS--513 of 0.6mm thick "D" quality, galvanized as per IS-277 with zinc of 120Gm/Sq. mtr ) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black/pearl/ white/ chocolate brown) of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 33x57mm and shutter being of 46x52mm and 46x46mm and lock rail should be of 23 x 130mm. Accessories / gaswith 6mm thick clear glass etc complete including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge..
4.5
39914
8869.8
Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. in all Floor
40
489128
12228.2
Supplying, fitting, fixing up window (sliding/Fixed type) made up powder coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. in all Floor
156.16
1118480
7162.4
Finishing wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials , labour T & P etc complete as per direction of Engineer-in-charge. in G Floor
1033.8
75053
72.6
Finishing wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials , labour T & P etc complete as per direction of Engineer-in-charge. in 1st Floor
1302.1
96485
74.1
Finishing wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials , labour T & P etc complete as per direction of Engineer-in-charge. in 2nd Floor
1302.1
98438
75.6
Finishing wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials , labour T & P etc complete as per direction of Engineer-in-charge. in 3rd Floor
1302.1
100391
77.1
Finishing wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials , labour T & P etc complete as per direction of Engineer-in-charge. in 4th Floor
513.1
40380
78.7
Preparing surface and painting with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. over a priming one coat with Cement base primer of approved brand & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. in G Floor
1033.8
129948
125.7
Preparing surface and painting with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. over a priming one coat with Cement base primer of approved brand & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. in 1st Floor
1302.1
166668
128
Preparing surface and painting with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. over a priming one coat with Cement base primer of approved brand & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. in 2nd Floor
1302.1
169663
130.3
Preparing surface and painting with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. over a priming one coat with Cement base primer of approved brand & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. in 3rd Floor
1302.1
172658
132.6
Preparing surface and painting with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. over a priming one coat with Cement base primer of approved brand & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. in 4th Floor
513.1
69268
135
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint over a priming one coat with Cement base primer of approved brand including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete.in G Floor (Weather coat should of ICI/Berger/Asian is to be used).
234.65
27594
117.6
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint over a priming one coat with Cement base primer of approved brand including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete.in 1st Floor (Weather coat should of ICI/Berger/Asian is to be used).
339.7
41205
121.3
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint over a priming one coat with Cement base primer of approved brand including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete.in 2nd Floor (Weather coat should of ICI/Berger/Asian is to be used).
339.7
42564
125.3
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint over a priming one coat with Cement base primer of approved brand including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete.in 3rd Floor (Weather coat should of ICI/Berger/Asian is to be used).
339.7
43957
129.4
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint over a priming one coat with Cement base primer of approved brand including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete.in 4th Floor (Weather coat should of ICI/Berger/Asian is to be used).
225
30082
133.7
Painting two coat with approved brand of synthetic enamel paint of approved shade and quality over a coat of primer over iron works including cost of paint, primer, putty, scaffolding, T&P, cost, conveyance, cost of all materials and cost of all labour required for the work etc. complete as per the direction of EIC. in Ground floor (Paints of Burger/Nerolac/J&N /Asian/ ICI Brand is to be used.)
16.4
3540
215.9
Painting two coat with approved brand of synthetic enamel paint of approved shade and quality over a coat of primer over iron works including cost of paint, primer, putty, scaffolding, T&P, cost, conveyance, cost of all materials and cost of all labour required for the work etc. complete as per the direction of EIC. in 1st floor (Paints of Burger/Nerolac/J&N /Asian/ ICI Brand is to be used.)
21.2
4691
221.3
Painting two coat with approved brand of synthetic enamel paint of approved shade and quality over a coat of primer over iron works including cost of paint, primer, putty, scaffolding, T&P, cost, conveyance, cost of all materials and cost of all labour required for the work etc. complete as per the direction of EIC. in 2nd floor (Paints of Burger/Nerolac/J&N /Asian/ ICI Brand is to be used.)
21.2
4808
226.8
Painting two coat with approved brand of synthetic enamel paint of approved shade and quality over a coat of primer over iron works including cost of paint, primer, putty, scaffolding, T&P, cost, conveyance, cost of all materials and cost of all labour required for the work etc. complete as per the direction of EIC. in 3rd floor (Paints of Burger/Nerolac/J&N /Asian/ ICI Brand is to be used.)
21.2
4929
232.5
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 25mm X 25mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect. In all Floor
28.71
100143
3488.1
Providing edge moulding to 20 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. In all floor
55.35
13538
244.6
Providing and fixing cupboard with 1mm thick laminates(all visible sides), 19mm ply in front and sides and shelves , 6mm ply on back including SS hinges , depth 16inches, Handle and Tower Bolt along with brass special quality bright finished brass cupboard or wardrobe locks with four levers of approved quality including necessary screws etc. complete as per design approved by Engineer-in-Charg. in all floor
56.1
576808
10281.8
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved with water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge in 3rd Floor
400.1
185166
462.8
Supply & Providing Brick Khoa inclding cost of all materials & convenance as per the direction of the Engineer in Charge.
4.5
5770
1282.4
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision) etc complete as per direction of Engineer-in-charge.
28.1
73841
2627.8
Supplying and laying of M30 grade heavy duty factory made hydraulically pressed and mechanically compacted free cast pavers of 60mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
139.4
104326
748.4
Dismantling of brick or stone masonary in lime or cement mortar under 3 mtr height including stacking the useful materials for reuse & removing the debries within 50 mtr. lead including cost of all labours,T & P required for the work etc. Complete as directed by EIC.
38.3
46565
1215.8
Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking ofhe materials for reuse and removing the debris within 50m lead including cost of all labours,T & P required for the work etc. Complete as directed by EIC.
70
5530
79
Dismantling and removing doors,windows and ventilators including removal of frame,hinges,fastening and stacking the same for reuse and removing the debris within 50m.lead including cost of all labours,T & P required for the work etc. Complete as directed by EIC.
13.5
4683
346.9
Water Supply & Sanitary Fittings
-
-
-
Supplying all materials, labour T&P for fitting and fixing 550x440mm of approved make IWC Pan with 4" dia PVC 'P' trap including supply of necessary jointing materials, cement concrete, sand etc. for fixing the pan, 'P' trap including cutting the floor and making good to the damages etc. all complete as per direction of EIC and as per PH specification. (Make: Hindware-ORISSA PAN (COMFORT) Cat. No.: 20070
16
70379
4398.7
Supplying all materials, labour, T&P and fixing the wall mounted Rimless Single Piece-WC with UF slim seat cover, Hinges, Fixing Accessories and Accessories Set, Cistern Fittings, including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. MAKE JAQUAR-FLS-WHT-5353PPZ
1
13009
13009.8
Supplying all materials, labour T&P and fitting and fixing of 10 ltr. Capacity PVC Low level flushing cistern with flush bend and a pair of white enameled coat iron bracket 12mm dia PVC inlet connection pipe (0.45 m long) with brass union including cutting hole and making good to the same and connecting the inlet pipe with supply main etc. all complete as per specification and direction of EIC. (Make: Hindware-SLEEK FRESH DUAL FLUSH
16
30384
1899
Supplying all materials, labour T&P and fixing Wall Hung & Half Pedestal type wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge. jaquar-CNS-WHT-811,CNS-WHT-303, Bottle Trap-ALD-769L250x190, waste copler ALD-709L130
34
182478
5367
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick WPC sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. Swivel Mirror Rectangular Shape(600x450)
34
26360
775.3
Supplying all materials, labour, T&P and fixing standard sized SINK cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.JAQUAR-FLR-5347N
2
4320
2160.3
Supplying all materials, labour, T&P and fixing standard sized LONG BODY Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials etc. all complete as per P.H. specification and direction of Engineer-in-charge.
15mm dia CP long body bib cock with Flange jaquar CON -107KN
14
22058
1575.6
Supplying all materials, labour, T&P and fixing standard sized Two way Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Engineer-in-charge. 15mm dia CP Two way bib cock with Flange jaquar FLR-5041N
17
39210
2306.5
Supplying all materials, labour, T&P and fixing standard sized 15mm pillar cock of of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock.(MAKE -JAQUAR -FLR-5015 Pillar Cock)
34
65994
1941
Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange Make : Jaquar-FLR-5053N
28
34566
1234.5
Supplying all materials, labour, T&P and fixing standard sized Chromium Plated Shower with shower arm complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge. SHOWER HEAD-JAQUAR-OHS-1789,SHOWER ARM-SHA-477,ANGULAR STOP COCK-JAQUAR-FLR5083NK & JAQUAR-ALD-089
13
71156
5473.6
Supplying all materials, labour, T&P and fixing standard sized Chromium Plated Glass Shelf corner of complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge.jaquar-ACN-1173
14
23968
1712
Supplying all materials, labour, T&P and fixing standard sized 600 mm Towel Rack of complete with all as per specification and direction of the Engineer in charge. jaquar-ACN-1181FS
14
38294
2735.3
Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel ring of complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge. Jaquar ACN-1121BN
16
19636
1227.3
Supplying all materials, labour, T&P and fixing standard sized Chromium Plated soap case complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge.
29
11243
387.7
Supplying, fixing and testing PVC Nahani trap with SS frame and cover 90mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete 90 mm dia
32
7769
242.8
Supplying, installing, fixing, jointing, testing and commissioning of approved make. Polyvinyl Chloride pipes (UPVC) SDR.11 pipes confirming to ASTM standards with necessary fittings for inetrnal toilet water supply upto 50 dia , and above 50mm dia pipe schedule 40 with fitting shall be schedule 80 ASTM IPS. The fittings and specials such as tees, elbows,couplers, bends, enlargers etc.,m with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement martor 1:1 restore the same original condition neately as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846 and above 50mm dia primer P-70, and solvent confirming to ASTM F-4931 / 724 All exposed pipe shall be painted with latex paint. (for shafts, basement ceiling ringmain Terrace & PRM).The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete
-
-
-
20mm dia UPVC pipe
220
45694
207.7
25mm dia UPVC pipe
60
16374
272.9
32mm dia UPVC pipe
70
33901
484.3
Supplying, fixing and testing of kitchen Sink Stainless steel kitchen sink including fixing in position with necessary brackets cutting of slabs etc of size 585x485mm bowl depth 200 mm NIRALI GLISTER SUPER)
2
16004
8002.2
Supplying, fixing and testing PVC soil, waste, Rain and vent pipes (SWR) confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of allnecessary specials like bends, tees,offsets, door bends, junctions, cowls, etc.,laid underfloor/ fixed on walls,and in pipe shafts etc., complete.The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. Make:- Supreme/Ashirbad/Astral/Sentini110 mm dia
234
86135
368.1
Supplying, fixing and testing PVC soil, waste, Rain and vent pipes (SWR) confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of allnecessary specials like bends, tees,offsets, door bends, junctions, cowls, etc.,laid underfloor/ fixed on walls,and in pipe shafts etc., complete.The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. Make:- Supreme/Ashirbad/Astral/Sentini75 mm dia
75
16875
225
Supplying all materials, labour, T&P for fitting & fixing 110mm dia PVC Door bend including supply of all jointing materials like gaskets, adhesive, solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:- Supreme / Oriplast / Hariplast)
100
39850
398.5
Supplying all materials, labour, T&P for fitting & fixing and laying 110mm dia Upvc Tee including supply of all jointing materials like gaskets, adhesive ,solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make :- Supreme / Oriplast / Hariplast)
52
15943
306.6
Supplying all materials, labour, T&P for fitting and fixing of 110 mm dia PVC HR bend approved make including supply all jointing material like gasket, adhesive, solvent cement etc and fitting to walls with nails,bobbins and wooden plugs as per specification and direction of the Engineer in charge (Make:- Oriplast / Hariplast)
25
4387
175.5
Supplying all materials, labour, T&P for fitting & fixing and laying 100mm dia UPVC cowel of including supply of all jointing materials like gaskets, adhesive ,solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme)
21
1837
87.5
Fixing of 25 mm dia UPVC Ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge. (Make- ORIPLAST/ Hariplast / Supreme.)
22
9479
430.9
Fixing of 32 mm dia UPVC Ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge. (Make- ORIPLAST/ Hariplast / Supreme.)
20
14364
718.2
Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge.JAQUAR-ALD-577 Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer)
20
36798
1839.9
Supplying all materials, labour, T&P and fixing Flat back urinal with speader of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.Jaquar-URS-WHT13261,ALD1043/1041.
15
71677
4778.5
Supplying, installing, testing and commissioning of approved make UIrinal flush Valve automatic flushing systems for urinal to ensure flusing only immediately after use, comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells (Sensor), eyes electrically operated solenoid valve, gate valve, black box and necessary wiring in conduit from solenoid value to black box and to mains Including necessary wall cutting/chasing and making good, as required etc. all complete as per P.H. specification and direction of Engineer-in-charge. Make : URINAL FLUSH VALVE FLV-1095NG (Make: Jaquar)
15
56980
3798.7
Supplying all materials, labour, T&P for fitting and fixing and laying 100mm dia C.I / PVC double junction plain Cross- T of appd. make including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding and testing etc as per PH specification and direction of the Engineer in charges (Make :- Oriplast / Supreme)
40
13576
339.4
Supplying all materials, labour, T&P for fitting and fixing and laying 100mm dia C.I. / PVC single junction plain- T of appd. make including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding and testing etc as per PH specification and direction of the Engineer in charges (Make :- Oriplast / Supreme)
17
5084
299.1
Supplying all materials, labour, T&P for fitting & fixing 75 mm dia PVC Door bend including supply of all jointing materials like gaskets, adhesive, solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:- Supreme / Oriplast / Hariplast)
20
6696
334.8
Supplying all materials, labour, T&P for fitting & fixing and laying 75mm dia Upvc Tee including supply of all jointing materials like gaskets, adhesive ,solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make :- Supreme / Oriplast / Hariplast)
40
11964
299.1
Fixing Rotational moulded Poly Propelene Three layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts, fixing ball valve etc,including hosting upto a height of 10 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge. 5000 Ltr Cintex/Supreme
3
184628
61542.9
Bore Well
-
-
-
Construction of 1 nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hamer drilling rig or combination rig with pvc pipe and installation of submersible pump set with all acessoriesLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the engineer in charge including use of own rig with its accessories ,tools and plant and consumables etc for lowering of 200mm/150mm dia G.I.P.V C/M.S casing pipes for housing fitted with socket and with or without well screen as for the necessity for soft ,medium,hard and boulder formation( G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well) 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
Drilling of 200/150mm dia bore 0.00 to120 Mtr
120
108480
904
Lowering the following size PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials,tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreian materials from above.
-
-
-
150mm dia PVC SH-80
75
147495
1966.6
250mm dia PVC Oriplast pipe schedule-80
6
14745
2457.6
Cleaning & developing the tube well with supply of compressor worked till clear & adequqte discharge is obtained from the tube well including supply & use of all necessary equipment & labour as per directin of the Engineer in charge By DTH Rig
1
8192
8192.6
Supplying all materials, labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 Mtr below ground level (as per drawing) to plug the bore hole including cost of cement etc. all compltes as per direction of engineer in charge. Minium one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing.
1
1743
1743.9
Supplying all labour,T&P and materials for packing the bore with washed gravel (size P-6) around the pipes in good quality
1
2000
2000
Supplying all materials, labours, T&P and providing fitting & fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase /1 phase line voltage ranging from 320 volt to 450 volt conforming to Si 8034/89 with following specifications with suitable control panel ,jointing with GI/PVC/HDPE pipes,electrification,testing, commissioning ,trial running, conveyance of all materials to worksite , payment of taxex etc all complete as per specification & direction of the Engineer in charge (Texmo/crompton Greaves/ Kirloskar make)
3HP 3 phase 3 stage vertical/Horizontal submersible pump set at head renge of 30 to 65 mtr with discharge capacity 155 to 110 L P.M with outlet dia 32mm
1
25000
25000
Control Pannel
1
5000
5000
SFF and inst of 3 core copper flat cable
90
14400
160
SFF of GI bend of 40/50 mm dia
2
300
150
SFF of 10mm dia PVC rope for Sum Pump
160
4000
25
SFF of 50mm dia SS Nipple for fixing of outlet pipe
2
1400
700
SFF of 50mm OD HDPE pipe 10Kg
75
20385
271.8
SFF of MS Cover 450x450mm Square Man Hole Cover -50.0 kg
1
3000
3000
Supplying all materials, labour,T&P constructing Bore Well protection chamber of the size 650x650x1000 hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation,1st class fly ash brick work in cement mortar (1:3) with base cement concrete (1:2:4) using 12mm sizeh hg chips,12mm thick cement plaster (1:4) inside and outside, earthwork in excavation in all kind of soil anf refilling the cavity around the chamber including watering, curing, conveyance of all meterials to worksite,payment of royalty,taxes etc all complete as per approved specification and direction of Engineer in charge.
1
8640
8640
Electrical works
-
-
-
Supply & Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.Average length: 5 Mtr
130
139750
1075
Supply & Recessed wiring to secondary light point looped from primary light point with 1.5 Sq mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC conduit with 1.5 Sq mm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. Average Length: 3 Mtr
221
63206
286
Supply & Recessed wiring with 5 / 6 Amp Modular socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size on existing board including all accesories and connection on same switch board as per direction of Engineer in Charge.
58
13224
228
Supply & Recessed wiring for 2 x 6 Amp Modular socket outlet controlled by 2 nos 6Amp, 250 V clip in type Modular switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.
80
56160
702
Supply & Recessed wiring for 6 pin 16 Amp Modular socket outlet with 16Amp, 250 V clip in type Modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
34
17510
515
Supply & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.
892
132016
148
Supply & Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.
660
108900
165
Supply & Recessed wiring to submain in 4 x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge.
308
89936
292
Supply and fixing of 12 way SPN Glazed double door horizontal type MCB distribution board, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc.
Incoming:-40 Amp 4 Pole, B-Series MCB-1 No.
Outgoing:- 6-32 Amp SP, B-Series MCB-8 Nos as required including all accesories and connection as per direction of Engineer in Charge.
8
80080
10010
Supply and fixing of 6 way SPN Glazed double door horizontal type MCB distribution board, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. with
Incoming:- 32 Amp 4 Pole, B-Series MCB-1 No.
Outgoing:- 6-32 Amp SP, B-Series MCB-2 Nos as required including all accesories and connection as per direction of Engineer in Charge.
5
29500
5900
Supply,Installation, Testing and Commissioning of Recess mounted indoor type 18W ROUND LED Luminaire with LED Lamp Similar to Havells Cat No. LHEAABP6IN1W018 with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC
213
177855
835
Supply,Installation, Testing and Commissioning of 6 Amp angle holder with 9W LED bulb with all accessories and lamp etc. directly on wall , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
46
8832
192
Supply and fixing of 10W bulk head fitting with enclosure including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.
26
30862
1187
Supply,Installation, Testing and Commissioning of Recess mounted indoor type 36W 2'x2' Square LED Luminaire with LED Lamp with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC
22
71060
3230
Supply , fixing & termination of IP65 90Watt Outdoor Street Light LED Luminaire fittings with GI bend pipe, accessories to hold the GI bend pipe including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.
16
118624
7414
Supply and fixing of 7.5 watt Screw type LED fillament based bed lamp with enclosure including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.
24
14136
589
Supply, Installation, Testing and Commissioning of BLDC ceiling fan 1200mm sweep with remote controller, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
90
369090
4101
Supply, Installation, Testing and Commissioning of 300 mm dia 900 RPM Heavy Duty Metalic Exhaust Fan with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
29
113535
3915
Supply, Installation, Testing and Commissioning of 450mm dia 1400 RPM Industrial Type metalic Exhaust Fan with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
3
17037
5679
S/f of 5 star rated wall fan Supply, Installation, Testing and Commissioning of 5 star rated wall fan 400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
7
14406
2058
Supply and fixing of chemical Earthing of with 3mtr long 40mm dia chemical filled comound and GI earth electrode including excavation of earth pit with highly conductive back filled chemical compund of 2 x 25kg , brick work in cement mortar masonary work with removable cover for Earth pit chamber of suitable size including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
20
216300
10815
Supply and Fixing of spike copper Lightning arrester of 9mm dia 912mm long solid including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
6
15324
2554
Supply and laying of 6 SWG GI loop earth wire in PVC conduit including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
349
16752
48
Supply and Laying of 25x3 mm GI Earthing Strip including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
484
31944
66
Supply and fixing of 5kg dry powder type fire extinguisher including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
28
174916
6247
Supply and laying of 3.5core 70 sq mm XLPE Armoured Aluminum Cables in trench & laying with sand, protective covering including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
250
170250
681
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 3.5 core x 70 sqmm A2XFY.(2 Run for each feeder)
2
2706
1353
Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel (Double Door, Outdoor Type) totally enclosed, dust and vermin proof with IP-65 protection with hinged and lockabale doors.CRCA sheets including Busbars, interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used MAIN PANEL with INCOMER:- 200A 4P Onload Change Over Switch-1 No., 200A 4P MCCB (50kA)- 1 No, 50kA Type-I+II 3P+N SPD-1 No. 100Amp 4P HRC Fuse set with Fuse-1 Set
OUTGOING:- 125A 4P MCCB (50kA) - 1 Nos, 63A 4P MCCB(25kA) - 4 Nos, 32A 4P MCCB(25kA) - 2 Nos, 16A DP MCCB - 2 Nos. and 3nos 250/5A CT, 1 No 0-200A Digital Ammeter, Digital Voltmeter, R-Y-B Indicating Lamp and 250 A aluminium Bus Bars including all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge.
1
195194
195194
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements