Odisha Lift Irrigation Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
AI Insights
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender can be calculated using the formula: Assessed bid capacity = (2x A x N - B) Where:
A = maximum value of work executed in any one financial year during last five years (updated to the current price level)
B = value at current price level of the existing commitments and ongoing works to be completed during the period of completion of works for which bids are invited
N = No. of years prescribed for completion of the work for which the bids are invited. Additionally, the bidder should have a minimum working capital requirement (credit facility) of 20% of the amount put to tender, which is Rs. 188.00 Lakhs. Also, the minimum quantity required can be calculated as: Minimum quantity required = 0.4 x (estimated quantity of work) x 12 / period of completion However, the condition for bid capacity is that the available bid capacity at the expected time of bidding should be more than the total estimated cost put to tender. But the exact value of bid capacity is not provided. Therefore, the answer is: Assessed bid capacity = (2x A x N - B) with the condition that available bid capacity > total estimated cost put to tender.
Technical Capacity
... View More
The required prior work experience for the bidder includes satisfactorily completing similar work, which is a composite work of drilling, energisation, and commissioning. In the case of a single prime contractor, the bidder should have completed at least one similar work of value not less than Rs. 376.00 Lakhs, which is 40% of the proposed contract value. In the case of a joint venture, the bidder or their identified sub-contractor (JV partner) should have completed similar work of value not less than Rs. 150.00 Lakhs, which is 40% of the value mentioned for a single prime contractor. Additionally, the bidder or their identified sub-contractor (JV partner) should possess a valid electrical license and have executed similar electrical works of value not less than Rs. 226.00 Lakhs, which is 60% of the value mentioned for a single prime contractor. The bidder should have executed a minimum quantity of similar major items of work, which is 40% of the estimated annual quantity of execution. The bidder should also have access to or availability of credit facilities, with a minimum working capital requirement of 20% of the amount put to tender, which is Rs. 188.00 Lakhs. A weightage of 10% per year is given on the cost of satisfactorily completed works of previous years to bring them to the current price level. The bidder must demonstrate having experience and resources sufficient to meet the aggregate of the qualifying criteria for the individual packages. The assessed bid capacity is calculated as (2x A x N - B), where A is the maximum value of work executed in any one financial year during the last five years, updated to the current price level with a 10% escalation factor per year. The bidder should have completed satisfactory works in previous years, and a weightage of 10% per year will be given on the cost of such works to bring them to the current price level. The bidder should furnish a certificate from an authority not below the rank of Executive Engineer or any other competent authority to support their work experience for the last 5 years. The bidder should also submit annual I.T. Return of the last 5 years for assessment of financial soundness. The bidder's prior work experience and completed works are considered in the evaluation process, with a focus on the value and percentage of similar works completed. The qualifying quantity can be calculated as 0.4 x (estimated quantity of work) x 12 months/period of completion. For example, if the estimated quantity of work is 300 nos bore well and the period of completion is 6 months, the minimum quantity required to qualify is 0.4 x 300 x 12/6 = 240 nos bore well. The required prior work experience for the bidder includes completion of similar major items of work as per the Detailed Tender Call Notice (DTCN). The bidder is required to have similar work experience as mentioned in SCHEDULE-A. The bidder should have completion of similar major item of work as mentioned in SCHEDULE-B(B) of SECTION 2(H). The bidder needs to demonstrate having experience and resources sufficient to meet the aggregate of the qualifying criteria for the individual packages. The values and percentages mentioned are: - Rs. 376.00 Lakhs (40% of the proposed contract value for a single prime contractor)
- Rs. 150.00 Lakhs (40% of the value mentioned for a single prime contractor for a joint venture)
- Rs. 226.00 Lakhs (60% of the value mentioned for a single prime contractor for a joint venture)
- 40% of the estimated annual quantity of execution
- 20% of the amount put to tender (Rs. 188.00 Lakhs)
- 10% per year weightage on the cost of satisfactorily completed works of previous years.
Costs
EMD
₹ 9,41,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_OLIC_109795_3Tender No
776 DT-22.01.2025Tender Authority
Odisha Lift Irrigation Corporation Limited ViewPurchaser Address
-Website
http://http://www.odishalift.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Cost of 200mm dia PVC (Sch-80). Casing Pipe of reputed make as per ASTM 1785/2021 specification. Manufacturer name should prominently be marked with CIPET test certification in the body of the pipe in indelible ink or stenciled to the satisfaction of Engineer-in-charge
275.2
-
-
... More
Cost of 200mm dia PVC C.S. Casing Pipe of reputed make as per IS-12818/2010 specification. Manufacturer name should prominently be marked with CIPET test certification in the body of the pipe in indelible ink or stenciled to the satisfaction of Engineer-in-charge
4884.8
-
-
... More
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the well including suppply and use of all necessary equipment and labour as per the direction of the Engineer-in-charge
300
-
-
... More
Conducting yield test through pumping for minimum 6-8 hours including supply of required pump set having 3.5 LPS discharge at 70 Mtr. head, 15KVA D.G. Set and a container of 200 ltrs. Capacity as required to suit the site condition as per the direction of the Engineer-in-charge including supply of tools plants labourers for lowering and lifting the pump set and measuring the yield of the bore well .
300
-
-
... More
XLPE insulated ( heavy duty ) armoured aluminium electric cable of size 3 core x 6 sqmm. with allumium conductor for use in 3 phase system in working voltage up to 1100 volt at 50 HZ confirming to IS 7098 part -I- 1988 & as per the particulars mentioned .
3000
-
-
... More
Cost of 63 mm. dia. HDPE 80 (PN 10) delivery pipe as per IS-4984 / 2016.
9750
-
-
... More
Cost of 63 mm. dia. HDPE 80 (PN 6) delivery pipe as per IS-4984 / 2016.
6750
-
-
... More
8 mm Steel Wire Rope with PVC coated best quality suitable for borewell
33000
-
-
... More
3 core 2.5 sqmm submersible Flat Cable with bunched copper conductor insulated and sheathed with PVC for submersible pump motor with voltage up to 1100volt confirming to IS 694/1990
1500
-
-
... More
200mm dia Bore well cap (C.I.) best quality suitable for borewell
300
-
-
... More
63 mm dia G.I Bend with Socket confirming to lS No.1239 (Pt‐II/1992)
300
-
-
... More
63 mm dia Stainless Steel threaded nipple of 15 Cm long confirming to lS 1239 ‐ Pt‐II/1992
600
-
-
... More
FTH SS Nut bolt as per IS specification suitable for fitting of stainless steel threaded nipple
1200
-
-
... More
63mm dia C.I. gate valve of ISI mark.
300
-
-
... More
Pannel Chamberwith FLYASH Brick massonary in CM(1:6) of size 1.2m x 1.2m x 2.1m including A.S, Flooring 2.5 cm depth in cm (1:2:4) sand filling, plastering in cm (1:6) curring etc in complete as per direction of Engineer-in-Charge
300
-
-
... More
Writing of required data and information on Pannel Chamber
66
-
-
... More
Cable clip of reputed brand
3000
-
-
... More
Installation of submersible pump inside the bore well fitting of HDPE pipe, tying the pump set with wire rope, connecting the supply line and submersible cable with starter, fixing the pannel board completing all the electrical installation, charging the project and making trial run etc. complete. as per the direction of the site engineer-in-charge ( Pump & starter will be supplied by the Department )
300
-
-
... More
LT panel box (fibre with water proofing provision) of size 30cmx25cmx15cm with kitkat fitted over bakalite board including pole clamp arrangement.
300
-
-
... More
32 Amp. Kitkat as per IS specification of reputed brand
900
-
-
... More
Coil earthing with No.8 GI wire using required quantity of common salt, charcoal , GI nut bolt including digging the earth pit of size 1.2mtr. X 1.2mtr.x3mtr. And digging the wire trench and refilling after completion of earthing including supply of all materials trnsportation etc. complete as per the direction of the site engineer-in-charge
300
-
-
... More
Transpotation of required PVC C.S./A.S.T.M. Pipe for casing and delivery, S/S Pump set & control pannel with other petty materials etc. from store to work site.
300
-
-
... More
Construction & erection of 11/0.416 KV, 25 KVA (BIS level-II), Star rated (As per DISTCOM specification) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure supported in 300 Kg. 9 Mtr. Long PSC pole, transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 25 KVA S/S, 4 no. Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gauge 3 mtrs. Long, fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat (100 AMP) fuse with MCCB (As per DISTCOM specification) 3 1/2 x 95 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.
60
-
-
... More
Construction & erection of 11/0.416 KV, 63 KVA (BIS level-II) rated (As per DISTCOM specification) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 63 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat(200AMP) fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.
4
-
-
... More
Construction & erection of 11/0.416 KV, 100 KVA (BIS level-II) star rated (As per DISTCOM specification) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 100 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat (200 AMP) fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.
2
-
-
... More
Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956 with 300 Kg. 9 Mtr. Long PSC pole support in 50 Mtr. Span.55sqmm AAA Conductor with double disc arrangement,11KV "V" cross arm with required nos. of 11 KV B & S disc. Insulators and 11KV pin insulators, carping & paddig of poles,danger board at each pole, anticlimbing devices.Stay set at each bending point and double stay at end point with 18mm G.I. H.T. stay, concreting of stay with anchor plate etc. including cost of materials, labour, transportation, inspection & commissioning etc. (As per DISTCOM specification) complete including painting in Navy Blue colour band with inscription of OLIC in each Pole
19.8
-
-
... More
Construction of 3 phase L.T. Line with supports of 200 kg PSC pole of 8 mtrs. Long of span length of 30 mtr to 35 mtr. with 3x35+1x25 mm2 A.B. Cable with required materials, piercing connector, Pannel, etc. including cost of materials, labour, transportation etc. complete including painting in Navy Blue colour band with inscription of OLIC in each Pole.
46.8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%