Odisha Lift Irrigation Corporation Limited Tender

Lowering the casing pipe of 200mm dia with or without slotted pipes as per the necessity from ground level upto 45 meters depth and fitted and fixed up in perfectly vertical position, including cutting, threading and slotted pipe and supply and fixing all jointing materials, tools and plants etc. complete and keeping the top of the casing pipe threaded including plugging the bore well to prevent entry of foreign materials from above 0 to 30 meter and above.

Cost of 200mm dia PVC C.S. Casing Pipe of reputed make as per IS-12818/2010 specification. Manufacturer name should prominently be marked with CIPET test certification in the body of the pipe in indelible ink or stenciled to the satisfaction of Engineer-in-charge

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the well including suppply and use of all necessary equipment and labour as per the direction of the Engineer-in-charge

Conducting yield test through pumping for minimum 6-8 hours including supply of required pump set having 3.5 LPS discharge at 70 Mtr. head, 15KVA D.G. Set and a container of 200 ltrs. Capacity as required to suit the site condition as per the direction of the Engineer-in-charge including supply of tools plants labourers for lowering and lifting the pump set and measuring the yield of the bore well .

Empty pannel board of size ( 110cmx45 cmx25cm) made out of 20 gauge CR sheet with stand made of MS angle of 20mm size with 4 nos. of legs of 30cm. Size painting in Navy Blue colour with inscription of OLIC

XLPE insulated ( heavy duty ) armoured electric cable of size 3 core x 6 sqmm. With allumium conductor for use in 3 phase system in working voltage up to 1100 volt at 50 HZ confirming to IS 7098 part -I- 1988 & as per the particulars mentioned .

Cost of 63 mm. dia. HDPE 80 (PN 10) delivery pipe as per IS-1785 / 2004.

Cost of 63 mm. dia. HDPE 80 (PN 6) delivery pipe as per IS-1785 / 2004.

8 mm Steel Wire Rope with PVC coated best quality suitable for borewell

3 core 2.5 sqmm submersible Flat Cable with bunched copper conductor insulated and sheathed with PVC for submersible pump motor with voltage up to 1100volt confirming to IS 694/1990

200mm dia Bore well cap (C.I.) best quality suitable for borewell

63 mm dia G.I Bend with Socket confirming to lS No.1239 (Pt‐II/1992)

63 mm dia Stainless Steel threaded nipple of 15 Cm long confirming to lS 1239 ‐ Pt‐II/1992

FTH SS Nut bolt as per IS specification suitable for fitting of stainless steel threaded nipple

63mm dia C.I. gate valve of ISI mark.

Pannel Foundation with KB Brick massonary in cm (1:6) of size 75cm X45cmX 60cm including base concrete of 7.5 cm depth in cm (1:2:4) sand filling, plastering in CM (1:6) curring etc complete as per direction of Engineer in charge

Cable clip of reputed brand

Installation of submersible pump inside the bore well fitting of HDPE pipe, tying the pump set with wire rope, connecting the supply line and submersible cable with starter, fixing the pannel board completing all the electrical installation, charging the project and making trial run etc. complete. asper the direction of the site engineer-in-charge ( Pump & starter will be supplied by the Department )

Cost of power capacitor 3KVR of reputed brand

LT panel box (fibre with water proofing provision) of size 30cmx25cmx15cm with kitkat fitted over bakalite board including pole clamp arrangement.

32 Amp. Kitkat as per IS specification of reputed brand

Coil earthing with No.8 GI wire using required quantity of common salt, charcoal , GI nut bolt including digging the earth pit of size 1.2mtr. X 1.2mtr.x3mtr. And digging the wire trench and refilling after completion of earthing including supply of all materials trnsportation etc. complete as per the direction of the site engineer-in-charge

Disply Board of size 1.80 mtr.x0.9 mtr. Stating the salient features of cluster bore well projects of letter size 10 cm. X 8 cm. having colour code of navy blue back ground & white lettering made with KB brick masonary in C.M.(1:6) with complete colouring including transportation.

Transpotation of required PVC C.S./A.S.T.M. Pipe for casing and delivery, S/S Pump set & control pannel with other petty materials etc. from store to work site.

Construction & erection of 11/0.416 KV, 25 KVA (BIS level-II) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 25 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gauge 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat fuse with MCCB (As per DISTCOM specification) 3 1/2 x 95 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.

Construction & erection of 11/0.416 KV, 63 KVA (BIS level-II) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 63 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.

Construction & erection of 11/0.416 KV, 100 KVA (BIS level-II) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 100 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.

Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956 with 300 Kg. 9 Mtr. Long PSC pole support in 60 Mtr. Span.55sqmm AAA Conductor with double disc arrangement,11KV "V" cross arm with required nos. of 11 KV B & S disc. Insulators and 11KV pin insulators, carping & paddig of poles,danger board at each pole, anticlimbing devices.Stay set at each bending point and double stay at end point with 18mm G.I. H.T. stay, concreting of stay with anchor plate etc. including cost of materials, labour, transportation, inspection & commissioning etc. complete including painting in Navy Blue colour band with inscription of OLIC in each Pole

Construction of 3 phase L.T. Line with supports of 200 kg PSC pole of 8 mtrs. Long of span length 40 mtrs. With 3x35+1x25 mm2 XLPE A.B. Cable with required materials, piercing connector, Pannel, etc. including cost of materials, labour, transportation etc. complete including painting in Navy Blue colour band with inscription of OLIC in each Pole.

Cost of 3-phase tested energy meter with fibre box including LT pole clamp arrangement and fitting including testing fee