Odisha Lift Irrigation Corporation Limited Tender

Fly Ash Brick masonry 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge.

Cement Concrete (1:2:4) with 4cm size h.g.c.b. Chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. co

Filling the foundation and plinth with excavated material as directed by the Engineer-incharge.

12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.

Fly Ash Brick masonry 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in superstructure etc. complete as per the Engineer-incharge.

Priming of M.S.Door with approved primer

Painting of 2 coats with approved shade of paint including cost, labour etc complete

White/Colour washing 2 coats with shell lime over 2 coat white washing.

Cement Punning

Labour charges for writting of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.

Labour charges for connection of main switch to starter and starter to motor with connection of other electrical fittings and energisation etc. complete as per direction of the Engineer-incharge.

7.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification

Cost of 63 Amp. Main Switch Triple pole & natural of voltage range 440 volt of re-wirable fuse and shall confirming to IS-4064(PT-I& ) with ISI mark including all taxes etc.

Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp.

3x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site and laying below 0.9mtr of the ground and filling the excavated materials including watering and rammin including all taxed etc.

2.50mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company.

Electrical Earthing including all materials as per the direction of the Engineer- incharge

T & P materials kit comprising of tester, screw driver, DE Spanner, Plier, Ring Spanner suitable for maintenance of LIP etc complete.

100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.

100mm dia G.I.Socket ( Medium Duty) with ISI mark of reputed company.

200X100mm dia M.S.T/W Cap with ISI mark of reputed company.

M.S T/W Clamp (Pair) 100mm dia with ISI mark of reputed company.

Cost of 12mm dia PVC Insulated Steel Wire rope with ISI mark of reputed company.

100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company.

100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company.

100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed company.

100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company.

Nuts and Bolts

Thick Rubber Insertion 3mm thick

Fabrication of special joint including cutting, welding of pipes one end with other end suitable for connection to delivery pipeline of pumpset including cost of cutting, welding materials, fitting it in proper alignment with delivery pipeline etc.

Labour charges for Installation of pumpset and delivery fitting including fitting of Sluice Valve, NR Valve, Air Release Valve, PVC Tee and lowering of pump and transportation etc complete. & fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Valve and other fitting materials including cutting, welding etc. complete as per the direction of the Engineer-incharge.

200×110 mm Φ P.V.C Reducer (W.P 4Kg/Cm2) conforming to IS-4995/ 1988 with latest amendment.

200 mm Φ P.V.C Coupler (W.P 4Kg/Cm2) agricultural PVC fittings conforming to IS-4995/ 1988 with latest amendment.

200 mm Φ P.V.C End Cap (W.P-10 Kg/cm2) conforming to IS-4995/ 1988 with latest amendment.

50mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company.

160 mm Φ P.V.C End Cap (W.P-10 Kg/cm2) conforming to IS-4995/ 1988 with latest amendment.

160 mm Φ P.V.C Coupler (W.P 4Kg/Cm2) agricultural PVC fittings conforming to IS-4995/ 1988 with latest amendment.

Miscellaneous item for fabrication comprising cutting, welding, jointing og metal pipes and extra earth cutting etc complete

Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete.