Odisha Lift Irrigation Corporation Limited Tender

Ist Class K.B.Brick (25cm x 12 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance + 8% in cement mortar (1:6) in foundation and plinth.

CC(1:2:4) in foundation and plinth

12mm thick cement plaster (1:6) for brick masonary

Cement Punning

Labour charges for lettering the display board in black colour , yellow back ground painting including the cost of materials.

Filling F & P with excavated materials including watering and ramming as directed by the Engineer-in-charge.

Provision for M. S. bolt for foundation 4 nos and MS hook for handling of FF

Laying and fitting of 100mm dia GI pipe

10 H.P.Monoblock Pump set ( BEE STAR Lebeled Energy efficient ) coupled with totally enclosed squirrel cage induction motor with delivery discharge 1700 LPM at 22 mtrs. Head with cable, cable clip, support clamp etc. suitable for operation at 415+6% ,-15% volt,3 phase ,50 Hz, AC power supply with ISI mark and guarantee . The materials of construction as given below. (a) Motor casing.. stainless steel AISI 304 (b) Impeller ... bronze (c) Pump shaft... stainless steel (d) Sand guard...... bronze. (e) Non-return valve... CIFG 200.

Automatic Control Pannel wth sheet steel enclosure suitable for operation of squirrel cage induction motor for 10HP having full load current of 16 Amp at 415V +6%- 15%, 3phase,50Hz, AC supply with over load relay range 7 to 10 Amp and No volt coil suitab

Main Switch 63 Amp including fitting and fixing as per IS No.-4064(Part-I & II) with utilisation capacity category AC-22.

3 ph. 4 wire 20 - 100 Amp. 3 x 230 Volt (P-N) current meter with ISI mark as approved by DISTCO,CESU with matching fibre glass with T.P Box(M.S)

4 KVAR Capacitor

3 x 10 sqmm Trapoder cable XLPE (Cross link polyethylin ) including laying below the ground and filling the excavated materials including watering and ramming with ISI mark and guarantee.

100 mm dia GI socket

100mm dia nominal bore G.I.Pipe having wall thickness 4.5mm electrical resistance welded of medium class conforming to IS - 1239 (part-I/2004) with latest Amendments,screwed at both ends as per IS -554 socketed at one end and the other end protected with plastic threaded protector. The socket conforming to IS:1239 (Part-II/1992) with latest Amendments in random length of 4 to 7 mtrs. Each pipe should bear ISI Certification and manufacturers name/trademark , for fitting in Suction & Delivery Pipes.

100 mm dia C.I.Sluice valve

100 mm dia GI Bend

100 mm dia GI Flange

100 mm dia MS clamp

Cost of 2.5mm Sqx3 core submersible flat cable of IXI mark suitable for 10 HP pumpset

Construction of 3 phase 11 KV line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC , 11 KV "V" Cross arm, with required No.of 11 KV T & C Disc. Insulators in tension point & 11 KV Pin insulators, Couping & Padding of Poles. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete.

Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation Star rated confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm M.S.Channel, Transformer belting on 2.80 M long 50 X 50 X 5 mm M.S.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75 X 40 X 6 mm M.S.Channel and supported by 1.0 M long 50 X 50 X 5 mm M.S.Angle, with 3 No. 11 KV Lightening Arrestors & Distribution box for 25 KVA S/S, G.I.pipe earthing with 25X5mm G.I.Flats including cost of 25 KVA 11/0.4 K.V.Transformer , 35 Sqmm 3 1/2 Core PVC Cable - 40 mtr couping & padding of Poles, Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning.