Odisha Lift Irrigation Corporation Limited Tender

Cement Concrete (1:2:4) with 12cm size h.g.c.b. Chips of approved quality from approved quarry with ramming, watering and curring etc. complete including cost, taxes except GST, royalty, conveyance charge of all material to worksite, supply of cement and T&P required etc. complete as per the direction of the Engineer-in-charge.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor including cost of materials, taxes except GST, royalty, conveyance charge of all material to worksite complete as directed by the Engineer-in-charge.

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification, tying the grills & placing in position including cost of binding wire 18 to 20 guage Including cost of HYSD Still Bar, taxes except GST, conveyance charge of material to worksite complete as directed by the Engineer-in-charge. (FE 415/ FE 500),

12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including watering and curring including cost of materials, taxes except GST, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-in-charge.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.

Fly Ash Brick masonry 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. including cost of materials, taxes except GST, conveyance charge of all material to worksite complete as directed by the Engineer-in-charge

R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost of materilas ,taxes except GSt, royalty, conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-in-charge.

Cost of Iron Door of (size 1.0m x 2.00m)

Cost of Iron Ventilator of (size 0.45m x 0.30m)

10cm thick dry brick khoa well watered & rammed to receive A.S.floorin including cost of materials ,taxes except GSt, royalty, conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-in-charge.

2.5cm A.S.Flooring in CC (1:2:4) including punning with 12mm HG Chips including cost of materilas ,taxes except GSt, royalty, conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-in-charge.

Priming of M.S.Door with approved primer

Painting of 2 coats with approved shade of paint on iron surface including cost, labour etc complete

Cement Punning

Colour washing 2 coats with shell lime.

Colour washing 2 coats with shell lime over 2 coat of white washing with shell lime.

Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc.

7.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification

Cost of 63 Amp. Main Switch Triple pole & natural of voltage range 440 volt of re-wirable fuse and shall confirming to IS-4064(PT-I & II ) with ISI mark including all taxes etc.

Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp.

3x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site and laying below 0.9mtr of the ground and filling the excavated materials including watering and rammin including all taxed etc.

2.50 mm2 PVC Submersible( 3 Core) Copper Flat Cable ISI mark of reputed Company.

100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.

Cost of 12mm dia PVC Insulated Steel Wire Rope ISI mark of reputed Company.

Fabrication of special joint including cutting , welding of pipes one end with other end suitable for connection to delivery pipe line of pump set including cost of cutting, welding, welding materials, fitting in proper allignment with delivery pipe line etc complete.

100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company.

100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company.

Thick Rubber Insertion 3mm thick and Nut & Bolt etc.

Labour charges for Installation of pumpset and delivery fitting including fitting of Sluice Valve, NR Valve, Air Release Valve, PVC Tee and lowering of pump and transportation etc complete. & fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Valve and other fitting materials including cutting, welding etc. complete as per the direction of the Engineer-in-charge.

Miscellaneous item like cleaning of site, overburden earth cutting etc.

Electrical Works: Errection of 3 phase 3 wire 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole using 55 Sqmm AAA Conductor having average span length of 40mtr , 11 KV "V" Cross arm, required No.of 11 KV T & C Disc, polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping, Padding and concreeting of Poles with all G.I.Channels. Danger Board and coil earthing at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 SWG, G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required. including cost of all materials, labour, transportation, inspection & commissioning etc. complete.

Commissioning of 1X 25 KVA, 11 /0.4 KV Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Polymer insulation, L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate.. All Channel matrials should be of G.I , 7 Nos earthing with massonary chamber along with 3mtr long G.I pipe of 50mm dia and G.I flat of 50mm x 6mm to all earthing point including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5) & A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size G.I. Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCODL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & charging as per specification of TPCODL etc complete.