Odisha Industrial Infrastructure Development Corporation Tender

Cutting, Straightening coiled or bent up HYSD / TMT Reinforcement Bars welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, and hoisting, lowering and placing the same in proper position according to the approved designs including cost, coveyance, loading, unloading ,stacking & taxes of HYSD/ TMT Reinforcement Bars and Binding Wires of 18 to 20 Gauge as required for the work , cost of all Labour ,Sundries, T&P,Staging and Scaffolding complete in all respect as directed by Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)

Supplying, mixing, providing laying in approved layer thickness to line, level grade & slope and constructing as per approved working drawing and approved mix design of wet mix Macadam (WMM) confirming to Gr.II of materials mentioned in table (400-10 & 400-11) & Technical specification part I / II Cl. 406 and its related sub-clauses along with Cl. 112 of specification for road and bridge work MORT&H (4th revision), including mixing in approved mixing plant with arrangement for controlled addition of water and transporting the mix from the plant to site by trucks /tippers and unloading the same to the hopper of the self propelled sensor paver, paving the same compacting by vibrating roller of minimum 80 to 100 kn static weight or of equivalent capacity to achieve minimum required density complete including full compensation all operations, all inclusive costs, contigencies, incidentals involved for finished defect free item of work complete to specification as per direction of Engineer or his representative to satisfaction.

Supplying, providing and applying tack coat @0.2kg/sqm of bituminous cut back conforming to IS 8887 for super imposition of approved bituminous mix with the help of a self propelled hot bitumen pressure sprayer to spread the hot bitumen uniformly over the cleaned prepared dust free surface at specified quantity as per technical specification (Part I/II) and under Cl.503, Cl- 112 of specification of road and bridge work MORT&H (4th revision) including full compensation to all operations, all inclusive costs, contigencies, incidentals involved for finished defect free item of work complete to specification as per direction by the Engineer in charge.