Odisha Industrial Infrastructure Development Corporation Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Proposed Construction Of Intake Well And Allied Facilities At Brahmani River Knic Near Jajpur, Odisha
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_IDCO_83362_1Bid Award Id
ViewTender No
PC/EST/E-95/2022-23Tender Authority
Odisha Industrial Infrastructure Development Corporation ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Up to 3.00 mtr depth
3
-
26650
... More
From 3.00 Mtr to 10.00 Mtr Depth
7
-
27870
... More
From 10.00 Mtr to 19.00 Mtr Depth
9
-
38648
... More
Soft Rock
-
-
-
... More
From 10.00 mtr to 20.00 Mtr Depth
2
-
39067.6
... More
Providing and laying stone laid over prepared floor including boulder apron laid as per drawing and Technical specifications(15cm to 30 cm size ) all complete as per drawing and technical specification.complete in all respect and as per direction of the engineer in charge.
3376.13
-
1700
... More
Providing and Laying Cutting Edge of Mild Steel weighing for Well Foundation complete as per Drawing and Technical Specification. including cost, conveyance, royalties, taxes of all materials and cost of all labour, labour cess, T&P including hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer-in-charge.
1.92
-
105413.2
... More
Providing ,Lifting, Hoisting & Laying RCC of M-35 Grade in all type of Concrete works of approved designs and drawings having a minimum compressive strength ( in work test) 35N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
31.44
-
10016.8
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-35 Grade in all type of Concrete works of approved designs and drawings having a minimum compressive strength ( in work test) 35 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
RCC Wall Steinng
848.65
-
10016.8
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of Concrete works of approved designs and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
Base Level Beam
29.07
-
11041
... More
Base Slab
81.31
-
9324.2
... More
Column
14.4
-
12241
... More
Tie Beam
4.68
-
9537.4
... More
Top Beam
6.1
-
12241
... More
Lintel
0.42
-
9537.4
... More
Providing & fixing TOR Fe-500 reinforcement bars (make of Sail, Tata) for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding welding , joining (if necessary),tying the grills, hoisting, lowering and and placing in position as per the approved design & drawings with provision of fan hooks including cost, conveyance and taxes of reinforcement bars or tor steel and binding wires of 18 to 20 gauge and labour required for the work in all heights as per the specification & direction of E-I-C. (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement.)
1064.81
-
8605.8
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge..
71.04
-
4665.8
... More
Providing 12mm thick cement plaster to the inside surface of brick masonry wall in cement mortar (1:6)including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
331.09
-
144.6
... More
Providing 16mm thick cement plaster to the Outer Plastered surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
331.09
-
208.2
... More
Supplying, fabricating & fixing of Structural steel items made out of channels, angles, flats, plates, chequerd plates I Section, Beam, Hollow Section any type of frame, space frame, gates, attrium in top, truss, purlins, columns, beams etc. complete as per drawing including priming with one coat of red oxide primer in all floors as per the direction of the Engineer-in-charge.
5753.58
-
82.6
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
168.36
-
671.55
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
9.28
-
4941.1
... More
Supplying, fitting and fixing of M.S window grills & shutter ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge.
984
-
81.8
... More
Providing and fixing Stainless Steel (Grade 416) railing made of hollow tubes, channels, plates, etc. including welding, grinding, buffing, polishing, curvaturing and fixing the same with necessary stainless steel nuts & bolts including fixing the railing with necessary accessories and stainless steel dash fasteners, etc. complete in all floors as per the direction of Engineer-in-charge.
(Payment will be made on the weight of stainless steel members excluding the accessories such as nuts, bolts, fasteners, etc.)
1130.11
-
468.3
... More
Providing & Painting two coats with oil bound washable distemper of approved brand and manufacture over a coat of wall primer by means of brush to inside surface of new walls including preparation of wall surface with finished smooth before application of wall primer & paint including cost of all materials, labour, scaffolding, T&P etc. complete as per the direction of Engineer-in-charge.
351.43
-
124.55
... More
Providing and Painting with Two Coats of weather coat of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of water bound cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.
351.43
-
139.3
... More
Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use.
42.38
-
199.85
... More
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.
448.53
-
495.4
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
100
-
304.6
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
120
-
855.9
... More
Providing, Fitting, Fixing including testing & Commissioning of Turbo Ventilators of 600mm dia with 42 vanes made up of 0.5mm thick Aluminium alloy 8011 with necessary accessories including fixing over roof as per drawings with cost of scaffolding, labour, tools ,equipments, transport , fuel, safety helmets, safety belts ,etc., all complete as per specification and the direction of the Engineer-In-Charge
6
-
5500
... More
VT PUMP FITTINGS
-
-
-
... More
Providing, fitting & fixing of following sizes of Ductile Iron valves as per IS specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C.
-
-
-
... More
450mm dia D.I Double Flange Sluice Valve ( rising spindle) with gear operation (spur gear arrangement) of PN-1.6 as per IS - 14846/2000
4
-
287762
... More
450 mm dia DI Double flanged single door Non-return valve of PN-1.6 as per IS:5312, Part-I
4
-
244914
... More
Providing all materials, labour T&P for laying of following dia MS Pipes with required size of fittings, like off set, bend, tapper etc. & connection to main delivery MS header as per site condition for water works purpose, including gas cutting by oxygen and acetylene gas flame, fitting and setting as per required size to IS specification and electrodes confirming to IS specification after "V" grove cutting including cost of hire and running charges of welding generator set etc,(The pipes shall be painted (both inner & outer) with two or more coats of food grade Epoxy paint 200 micron of approved shade ) and aligning the pipes as per IS-5822/1994 according to site condition . The cost inclusive of all , duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables etc. including testing the joint with required water pressure etc all complete as per specification and direction of EIC.
-
-
-
... More
450mm dia (NB) MS pipe of wall thickness 8mm as per IS-3589-Gr-330 with ISI Mark.
12
-
39175
... More
Providing all materials, labour, T&P including cutting & welding the following size MS flange (Drilling for flange PN-1.6, as per IS-6392, Table-17) suitable for 450 mm (NB) dia MS pipe including cutting the pipes by oxygen and acetylene gas flames as per the required size and shape, electric welding with the pipes as per IS specification including cost for hire and running charges of all machine with POL. (The flanges shall be made out of following thickness M S plate after cutting as per required size and shape), painting the flange with two or more coats of food grade Epoxy paint of approved shade, the cost inclusive hire & running charges of all machineries, POL, To & Fro charges with all consumables, testing of the joints with required water pressure etc. all complete as per specification and direction of EIC.
-
-
-
... More
MS Flange (44 mm thick) as per IS:6392,Table-17 suitable for 450mm dia (NB) MS Pipe
20
-
19054
... More
CONNECTING CHANNEL
-
-
-
... More
Earthwork in excavation of foundation trenches for columns, basement, tie beams, walls and steps in All Kind of soil including moorum, hard stony earth, earth mixed with boulders, Laterite rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
1.5 m initial lift.
277.57
-
211.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge of earth work.
105.52
-
117.4
... More
Plain Cement concrete (1:4:8)in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.
14.44
-
4072.3
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, RCC Wall, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires
and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
RCC Wall
71.24
-
4951.2
... More
Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in- charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
-
-
-
... More
In Foundation
71.24
-
8605.8
... More
Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC Wall
479.71
-
643.1
... More
Supply, Installation, Testing and Commissioning of 3-phase, 415 volt, 50 Hz vertical non-clog sludge removal submersible pump sets with auto-coupling unit . The capacity of each Pump,Head-12.00Mtr, Discharge-50 M3/Hr of solid handling size - 40 mm including required length of submersible copper cable, suitable capacity of DOL starter panel & lifting chain etc & install inside silt chamber of tunnel with all civil, electrical & mechanical works etc. all complete as per the technical specification & direction of EIC
-
-
-
... More
2 Sets (i.e, one running and one standby)
2
-
254369
... More
Providing, Laying, Testing & Commissioning of following size of High Density Polythyelene pipes confirming to IS:4984/1995, Gr. - PE-100, PN-12.50 (SDR-11) including lowering & jointing with pump delivery system with all required T & P, Machinaries etc all complete as per specification and direction of EIC.
-
-
-
... More
90 mm (OD) HDPE pipe
30
-
847.6
... More
Providing, fitting, fixing of 80 mm dia x 500 mm long stainless steel short piece-2no with required SS nuts & bolts fixed on both end of HDPE pipe with supporting clamps etc all complete as per specification & direction of EIC.
2
-
5000
... More
Providing, fitting, fixing of MS bar screen made out of 25 x 25 mm solid square bar and frame 50 x 50 mm x 6 mm MS angel with guide, the space between the square bar not more than 40 mm, painting the same with two or more coats of approved anticorrosive epoxy paint and fixing the same inside intake tunnel to arrest entry of floating materials to Intake well etc all complete as per specification and direction of EIC.
2
-
12000
... More
Providing, fitting, fixing of Penstock (sluice gate with hand wheel) made out of stainless steel Gr. 304 is also provided with polyurathane slides that guide the gate in its course. The uni-directional or bi-directional tightness is achieved by the contact between a soft seal joint and a stainless steel surface of clear opening size 1800 mm x 1500 mm and operating height will as per site condition & fixing the same inside intake tunnel with all civil,electrical & mechanical works including required machainaries, T&P etc. . A penstock is assembly a gate valve to control or isolate the flow water to intake well etc all complete as per specification and direction of EIC.
2
-
300000
... More
Providing all labour T & P, machineraies for connection to existing intake tunnel of inner size 1800 mm x 1500 mm with proposed tunnel including dismantaling the RCC structure of required size & shape , cutting & welding of MS reinforcement and making good the damages with RCC M-35 with necessary form work as per required size & specification, excavation of earth work in all kinds of soil with required depth & width, back filling, dewatering. The cost inclusive of hire & running charges of machineries, POL, consumables etc all complete as per specification and direction of EIC.
1
-
150000
... More
Earth work in all kinds of soil within 50 m initial lead and required lift including dressing & breaking of clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3mtr in depth, dewatering (if required) as per specification & direction of EIC.
1020
-
211.4
... More
Providing all material, labour, T & P for packing hard granite stone boulder of size 15 cm above including dumping with packing interstices properly and surface packing to proper line & level on both side of intake tunnel to protect the tunnel being top width 0.50 m,bottom width 1.50m & depth 2.00 m on each side of tunnel including de-watering etc all complete as per specification and direction of EIC.
1020
-
915.5
... More
Providing all material, labour, T & P with required machanires for making steel sheet pile for temporary shoring for deep excavation of required length & depth as per site condition. The sheet pile is made out of steel sheet pile and thickness notless than 8.50 mm confirming to IS: 2314/1986 (reaffirmed - 2003 ) The piling shall be driven in such a manner as to insure perfect interlocking throughout the entire length of each pile to the depth specified. The piules shall be held in proper alignment during driving by means of assemblings frames or the suitable temporary guide structures. Temporary guide structures shall be removed when they have served their purpose. At any that the forwarded edge of the sheet pile wall is found to be out of correct alingment: (a) the pile already assembled and partly driven shall be driven to the required depth, and (b) tapers piles shall then be driven to bring the forward edge into correct alingment before additional regular piling is assembled & driven. The maximum premissible taper in single pile shall be one-fourth inch per foot of length. The cost inclusive of hier & running charges of machaniraies, POL, to & fro charges, loading, unloading & hier charges of materials etcall complete as per specification & direction of EIC. Area of sheet piling 80.00 mtr x 8.00 mtr = 640.00 sqm (appox.)
640
-
7911
... More
VERTICAL TURBINE PUMP
-
-
-
... More
Supply, Installation, Testing and Commissioning of self water lubricated Vertical Turbine Pump set.The capacity of each Pump,Total Head-87.00Mtr, Discharge-3300 M3/Hr (Combined discharge when two pump running in parallel) and suspension length including strainer of 18.00 mtr with 6 pole, 6.6 KV , 50 Hz, vertical flange mounted TEFC induction motor, motors stool, sole plate including construction of cement concrete foundation etc. all complete as per the technical specification & direction of EIC
-
-
-
... More
4 Sets (i.e, Two running in parallel and two standby)
4
-
15252818
... More
EOT CRANE
-
-
-
... More
Design, Manufacturing, Supply, Installation, Testing and Commissioning of Double Girder 3-way travel Electric Overhead Travelling (EOT) crane of capacity 10 MT, span 10.00 mtr (appox.) & lifting height 6.00 mtr including load test install inside intake pump house with all civil, electric & mechanical works etc. all complete as per the technical specification & direction of EIC
1
-
2694680
... More
STAFF ROOM
-
-
-
... More
Earthwork in excavation of foundation trenches for columns, basement, tie beams, walls and steps in All Kind of soil including moorum, hard stony earth, earth mixed with boulders, Laterite rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the
work complete as directed by the Engineer-in-charge.
-
-
-
... More
1.5 m initial lift.
46.57
-
211.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge of earth work.
77.33
-
117.4
... More
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with betonies solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured up to bottom of pile cap)(dia.450mm).
342
-
1830
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. :
-
-
-
... More
Initial vertical load test for single pile
1
-
44717.75
... More
Routine vertical load test for single pile
1
-
16028.7
... More
Uplift load testing of pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable uplift load on pile etc. complete as per specification & the direction of Engineer-in-Charge.
1
-
16028.7
... More
Plain Cement concrete (1:4:8)in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.
15.68
-
4072.3
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, RCC Wall, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
In Foundation
-
-
-
... More
Column footing, Pedestal , Pile Cap etc
21.44
-
5105.65
... More
Plinth Beam
10.43
-
5465.7
... More
Column up to Plinth beam
2.67
-
10949.6
... More
Ground Floor
-
-
-
... More
Column & beam
15
-
10949.6
... More
Roof slab
16.81
-
9317.2
... More
Lintel
2.07
-
8781.4
... More
Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
141.06
-
8605.8
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
-
-
-
... More
In Foundation & Plinth
18.26
-
4304.8
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge..
-
-
-
... More
Ground Floor
3.03
-
4338.1
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 4 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. Half Brick
-
-
-
... More
Ground Floor
36.75
-
4562.4
... More
Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts, beam soffit & sides & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
62.57
-
158.9
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
... More
Ground Floor
182.6
-
142.9
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
... More
Ground Floor
250.65
-
204
... More
Supplying, fitting and fixing Vitrified Tile in floors of size 600mm x 600mm (Coloured/Printed Series) of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge..
(Note- Sample of stone tiles shall be approved before procurement and use.)
-
-
-
... More
Ground Floor
54.65
-
946.6
... More
Supplying, fitting and fixing Vitrified Tile in floors of size 600mm x 600mm (Coloured/Printed Series) of approved make in dado/skirting upto required height from floor level fixed in neat cement slurry after soaking the tiles in water and fixing over an under layer of 12mm thick cement mortar (1:3) , filling joints with white cement mixed with colouring pigments to match the colour and shade including washing and cleaning with Oxalic acid including polishing, cost of all materials, labour, taxes, transportation, loading & unloading, royalties, sundries, T&P, watering and curing etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of stone tiles shall be approved before procurement and use.)
-
-
-
... More
Ground Floor
4.5
-
1102.3
... More
Supplying and laying Antiskid ceramic floor tiles of make like Somany/ Johnson/ NITCO confirming to IS Code and of approved shade in floors of toilets using premium quality 300mm X 300mm size and 8mm to 10mm thick tiles thick tiles having average bending strength 300-350Kg/Sqcm for Skirting . set in cement mortar of proportion (1:4) and cement slurry to proper line and level including cutting to required size and shape and fixing at corners splays etc. and the joints are to be properly finished with white cement with colouring pigments including washing and cleaning with oxalic acid etc. complete including cost of all labour, materials, taxes, transportation, loading, unloading, royalties, sundries, watering and curing, T&P etc. complete as per design and as directed by the Engineer-in-charge. Note :- Sample of Ceramic Tiles shall be approved before procurement and use.
-
-
-
... More
Ground Floor
7.92
-
668.1
... More
Providing & fixing premium quality 6mm thick glazed ceramic wall tiles of size 200 mm× 300 mm up to required height from floor level of approved colour and make like Johnson / Somany / NITCO confirming to IS specification in Dado/Skirting in toilets and other areas fixed in neat cement slurry after soaking the tiles in water and fixing over 12mm thick cement plaster in CM(1:3) filling joints with white cement pointing mixed with colouring pigments to match the colour and shade including washing and cleaning with Oxalic acid etc. complete as per direction of the Engineer-in-charge including cost of all materials, with all taxes, transportation, loading, unloading, royalties, all labour, sundries, T&P, watering and curing etc. complete in all floors.
Note :- Sample of Glazed Ceramic Tiles shall be approved before procurement and use.
-
-
-
... More
Ground Floor
54.05
-
754.9
... More
Providing and applying Finishing inside wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T & P etc complete as per direction of Engineer-in-charge..
-
-
-
... More
Ground Floor
203.28
-
73.6
... More
Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
203.28
-
143.9
... More
Providing and applying two coats of weather seal coat of approved shade, Exterior Grade of approved make, quality and shade to the external surface of the building over a coat of primer of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)procurment & use)
-
-
-
... More
Ground Floor
250.65
-
136.7
... More
DOOR & WINDOW FIXING
-
-
-
... More
Providing & fixing factory made single extruded WPC( Wood
polymer Composite) solid door /windows/other frames/chowkhat of required size comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers( wood powder/rice husk/wheat husk) and non toxic addictives ( maximum toxicity index of 12 for 100gms)fabricated with miter joints after applying PVC Solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 900kg/cum, screws withdrawal minimum stregth of 2200 N(Face) & 1100 N(Edge), minimum compresive strength 58N/mm2,modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners 6 nos.
10mm dia ,150mm length of Hilti/Fischer anchor fasteners
including cost, conveyance, loading, sundries, T&P required for
the work etc. complete in all respect excluding GST as directed
by the Engineer-in-charge. (Frame size 65 x 125 mm)
10.4
-
1035.6
... More
Providing and fixing ISI marked 35 mm thick flush door shutters finished with 1.0mm thick laminate on both side conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood including 4 Nos. stainless steel butt hinges of size 100mm x 60mm x 2.5mm, 1 No. of 6 lever mortice lock with handle, , necessary hardware fittings like screws,etc. all complete as per the direction of Engineer-in-charge.
4.2
-
4563
... More
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per direction of Engineer- in-Charge.
9.9
-
291.2
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. including cost of all fittings Aldrop/Door stopper/Handle/Tower Bolt conveyance loading sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
3.15
-
2304.1
... More
Supplying and fitting - fixing of Un-Plasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL VEKA LTD.) Three Track Three Panel / Two Track Two Panel sliding window--60- Series duly manufactured using UPVC Reinforced profile of 108mmx45mm x 2.5mm for outer frames and window sash of 39mmx58mmx2.25mm for capable of mounting single glazing system,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefebricated & welded through fusion welding the window frame shall be shall be fitted with 6 mm thick clear toughen glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance and the system is to be installed using Reinforced large coupler at the site using anchore fastners,silicon rubber sealant,easy glazing/deglazing at site etc.including cost and conveyance of all materials,accessories,labour charge,material and product conforming to ASTM D 638-14,EN-477-95 and other applicable code and standards all complete as per direction of Engineer in charge.
-
-
-
... More
Ground Floor
16.8
-
5984
... More
Supplying, fitting and fixing of M.S grills & gate ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
480
-
81.8
... More
Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use.
-
-
-
... More
Ground Floor
8.09
-
197.3
... More
WATER PROOFING TREATMENT
-
-
-
... More
Providing and laying water proofing treatment in Roof Terrace by applying cement slurry mixed with water proofing cement compound consisting of applying application of two coats of Sika Topseal 109hi with Sika fab-1 @2.2kg/sqm. side wall surface to protect against leakage & seepage finally covered with a cement mortar (1:4). Proper penetration points with Sikagard 694 fi (moisture resistance epoxy putty)The rate includes the cost of all materials, cost of alll labour,T&P required for the work with preparation of surface , treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry etc. in all floors as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor Terrace
54.65
-
672.15
... More
Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor Terrace
54.65
-
301.6
... More
Internal PH Work & Septic Tank
-
-
-
... More
Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
... More
15 mm dia
5
-
201.7
... More
20 mm dia
20
-
260.9
... More
Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME.
-
-
-
... More
25 mm dia
11
-
336.1
... More
40 mm dia
55
-
556.3
... More
50 mm dia
5
-
747
... More
Providing all materials, labour, T&P for fitting & fixing of following uPVC Ball Valves confirming to per ASTM D-2467 in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all ,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
... More
25mm dia
2
-
398.8
... More
40 mm dia
1
-
884.4
... More
Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, , of all materials etc. all complete as per specification & direction of EIC.
10
-
159.3
... More
Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, , duties etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
5
-
44.9
... More
For 75mm to 150mm PVC pipe to pass in 250mm to 375mm thick wall
5
-
185.7
... More
Providing all labour,T&P for cutting holes in RCC chajja/roof for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, , duties etc. all complete as per specification & direction of Engineer-in-charge.
5
-
158.3
... More
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all , duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make: ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
... More
160 mm SWR pipe (Type-B)
40
-
1227.5
... More
110 mm SWR pipe (Type-A)
10
-
471.2
... More
75 mm SWR pipe (Type-A)
10
-
283.7
... More
Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 in all floor with all duties, transportation & requisite testing as per specification & direction of EIC.Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
... More
125 x 110 mm 'P' Trap with lip ring
2
-
673.7
... More
110 mm WC Bend
2
-
287
... More
110 mm Single Tee with Door
2
-
421.8
... More
110 mm cross tee with door
2
-
552.3
... More
110 mm x 87.5 0 bend
4
-
270.5
... More
110 mm x 87.5 0 door bend
2
-
326.7
... More
110 mm x 45 0 bend
2
-
234.2
... More
110 x 75 mm Nanhi Trap
5
-
230.2
... More
110 mm square mouth gully trap
3
-
831.6
... More
110 mm vent cowl with SS Jali
2
-
82
... More
110 mm pipe clip
40
-
58.6
... More
Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china floor mounted water closet (European pattern) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : HINDWARE/CERA/PARRYWARE
-
-
-
... More
EWC of size 570 x 350 x 390mm, Cat No. 20087 (S-10) of Hindware
1
-
5789.3
... More
Providing all materials, labour,T&P for fitting and fixing of white glazed vitreous china water closet (Orissa pattern) of size 580mm x 440mm of approved make as per IS-2556 with ISI mark fixing on the floor with 32mm PVC Long flush bend and cement concrete 1:2:4 for fitting the closet etc. all respect in all floors including cost, conveyance of all materials etc.all complete as per specification and as per direction of Engineer-in-charge. Make: HINDWARE/CERA/PARRYWARE
-
-
-
... More
WC of size 580mmx440mm (Orissa pattern ) Cat No. 20042 of Hindware
1
-
3421.5
... More
Providing all materials, labour, and T&P for fitting and fixing of PVC low level cistern complete with all internal fittings of approved make as per IS-7231 with ISI mark and providing of necessary PVC wall plug, screws and 15mm dia PVC water connecting pipe with union at each end etc all respect in all floors.as per specification all complete as per direction of Engineer-in-charge. Make : HINDWARE/CERA/PARRYWARE
-
-
-
... More
PVC Cistern (Sleek fresh ISI ) of size 325 x 476 x 155 of Hindware
2
-
1818.6
... More
Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin of approved make in all floor of approved quality including cutting the walls & floor and making good the damages etc. including all duties, transportation etc. all complete as per direction of EIC. (Make:HINDWARE/CERA/PARRYWARE )
-
-
-
... More
Counter top self Rimming Basin of size 510 x 430mm ( Model - Zen) Cat No. 10038 of Hindware
2
-
3779.9
... More
Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe with all duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge.(Make:HINDWARE/CERA/PARRYWARE )
-
-
-
... More
Flat back Large Urinal of size 375 x 390 x 590 mm Cat No. 60002 of Hindware
1
-
6368
... More
Providing all materials, labour,T&P and fittings and fixing of different water supply fittings (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge. Make:Hindware/Jaquar/Kohler
-
-
-
... More
20 mm CP concealed stop cock with adjustable wall flange. Cat No. F200008 of Hindware
1
-
1175.9
... More
15 mm CP Long Body Bib Cock with wall flange Cat No. F730011 of Hindware
1
-
1533
... More
15 mm CP Short Body Bib Cock with wall flange Cat No F330041 of Hindware
2
-
1163.9
... More
15mm CP Angular Stop Cock Cat No F330043 of Hindware
5
-
983.5
... More
CP Pillar Cock Cat No F330002 of Hindware
2
-
1223.9
... More
Shower with arm & wall flange Cat No. F160039 of Hindware
1
-
2029
... More
CP Angel cock self closing system for Urinal Cat No. F310003 ACP of Hindware
1
-
2164.7
... More
CP Spreader for Urinal Cat No. AGR-2010 of Kingston
1
-
768.4
... More
Robe Hook Cat No. F870007 of Hindware
1
-
847.2
... More
32 mm SS Waste coupling for W H Basin (FT) Cat No. F860010 of Hindware
2
-
387
... More
32 mm CP Doom waste for urinal Cat No. AGR - 2016 of Kingston
1
-
431.3
... More
Health Fucet ABS SS Braided Hose 1.00 mtr long with CP Hook . Cat No. F160068 of Hindware
1
-
1250.7
... More
Towel Ring Cat No. F880007 of Hindware
2
-
1659.2
... More
Towel Bar 600 mm long . Cat No. F840013 of Hindware
2
-
1939.6
... More
Toilet paper Holder with cover Cat No. F880003 of Hindware
1
-
1183.3
... More
Soap Dish Cat No F880011 of Hindware
2
-
1079.7
... More
CP Soap case Cat No. AGR ACS11 of Kingston
2
-
730.3
... More
SS Grating with/without waste pipe hole Cat No. AGR-ACS 39A of Kingston
5
-
281.2
... More
40 mm extension nipple Cat No F850101 of Hindware
5
-
144.2
... More
15 mm x 450 CP connection pipe with Nuts & Washers as per Cat No. AGR ACS-46 of Kingston
1
-
331.2
... More
32 x 750 mm long PVC waste pipe with coupling Cat No. AGR-ACS 70 of Kingston
2
-
182.7
... More
15 x 450 mm long PVC connection pipe with nut & washer Cat No. AGR-ACS 62 of Kingston
4
-
208.2
... More
EWC PVC seat cover (Premium) of Hindware
1
-
1032.1
... More
32 mm x 750 mm PVC Flush long bend with coupling
1
-
197.5
... More
Sink cock with regular swinging spout (Wall mounted) with wall flange . Cat No - ARI-39347 of Jaquar
1
-
1997.1
... More
Providing all materials, labour, T&P for fixing of following sizes of Bevelled edge mirror of 5mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance of all materials complete as per specification and direction of E.I.C. Make-Saint gobain
-
-
-
... More
5 mm thick Bevelled Edge Mirror of size 600 x 450 mm with back A C seat & CP cup Screw
2
-
799.7
... More
Providing, fitting, fixing of stainless steel A ISI 304 (18/8) kitchen sink of following size as per IS: 13983 /1984 with ISI mark in all floors etc all complete as per specification & direction of EIC.
-
-
-
... More
Stainless steel single bowl kitchen sink of overall size 610 x 460 mm x 200 mm matt finish as per IS :13983/1994 with ISI mark (Hindware Make)
1
-
9303.5
... More
Providing all materials, labour T&P for construction of Inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame (SFRC medium duty) for opening of 500mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Inner size 750mm x 750mm x 500mm depth
5
-
9255
... More
Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and royality, cost, conveyance etc. all complete as per specification & direction of EIC.
-
-
-
... More
Inner size 300mmx300mmx450mm depth Gully Trap chamber
3
-
1574
... More
Septic Tank & Soak Pit
-
-
-
... More
Earth work in excavation of foundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete .
-
-
-
... More
Upto 1.5 Mtr Depth
11.19
-
215.2
... More
From 1.5 Mtr to 3.0 Mtr Depth
9.34
-
230.7
... More
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge .
6.84
-
80.8
... More
Disposal of surplus earth/debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge.
4.35
-
151.2
... More
Supplying, filling in foundation and plinth with sand including watering and ramming, poking & compacting including cost, conveyance, royalties, taxes of the materials and cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
0.74
-
276.6
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 2.5cm to 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, of all materials and cost of all labour, labour cess, T&P, etc. required for the work including shoring, shuttering and dewatering if required including hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer-in-charge.
0.85
-
4425.3
... More
Providing, lifting, hoisting and laying design mix cement concrete of M-30 grade as reinforced cement concrete using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including cost of scaffolding, watering and curing for the required period, cost of all materials , royalties transportation, loading and unloading, all labour, sundries, T&P , hire & running charges of concrete mixer and vibrator, including cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of r reinforcement, centering and shuttering for the work.
3.56
-
4994.5
... More
Providing and fixing of M-30 grade precast concrete slab of 125mm thick with skin reinforcement, hoisting and placing in position, jointing with cement mortar 1:3 including the cost of all labour, materials, transportation, taxes, royalty, loading and unloading etc, all complete as per the direction of Engineer-in-charge
0.28
-
12121.56
... More
Providing & fixing TOR Fe-500 reinforcement bars (make of Sail, Tata) for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding welding , joining (if necessary),tying the grills, hoisting, lowering and and placing in position as per the approved design & drawings with provision of fan hooks including cost, conveyance and taxes of reinforcement bars or tor steel and binding wires of 18 to 20 gauge and labour required for the work in all heights as per the specification & direction of E-I-C. (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement.)
3.85
-
8613.25
... More
Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden or steel centering materials with all necessary bracing, ties and supports for level centering covered with bituminous paper including provision of necessary holes and pockets, P.H. pipes, clamps and extension bars etc., dismantling and removing the shuttering after the required interval from the date of casting as per the direction of the Engineer-in-charge., including cost of all materials with transportation, loading and unloading ,all labour for the work, sundries, T&P scaffolding etc. complete
-
-
-
... More
(a) R.C.C. foundation , plinth band and footings bases of columns mass concrete precast slabs etc
1.4
-
103
... More
(b) R.C.C. Floor and Roof slab, landing, balconies, projecting, sun shades and chajjas up to 4.30 Mtr. Height.
2.27
-
437.3
... More
(c) R.C.C. Wall
33.62
-
643.1
... More
Providing 1st class Fly Ash brick masonry work in F & P using (250mmx120mmx80mm ) size having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, all taxes, royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
0.94
-
4645.2
... More
Providing Honey Comb Brick Masonry / Dry brick Masonry Work with 1st class Fly Ash bricks (250mmx120mmx80mm ) size having crushing strength not less than 75Kg/Sqcm including cost, conveyance, taxes, royalties, loading and unloading of all materials, cpst of labour, labour cess, cost of scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
1.59
-
4114.4
... More
Providing 12mm thick cement plaster to the inside surface of brick masonry wall in cement mortar (1:3) with neat cement punning including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
20.07
-
197.2
... More
Providing 12mm thick cement plaster to the Outer Plastered surface of brick masonry wall in cement mortar (1:4) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
3.77
-
154.4
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in soak pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
1.26
-
1243.6
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the soak pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
1.26
-
1365.3
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in Soak pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
1.26
-
617.2
... More
Providing fitting & fixing of 500mm dia precast Factory made man hole Cover with frame (Medium duty) over Septic tank and Soak Pit including cost, conveyance, taxes of all materials, cost of all labour, labour cess, T&P, etc. complete as per the direction of Engineer-in-Charge.
3
-
1220
... More
Providing and Fixing Unplasticised 100mm dia PVC Single Tee with out door in Septic Tank for Connection of PVC Sewer pipes confirming to IS: 13592 type-A, including jointing with seal ring confirming to IS:5382, leaving 10mm gap for thermal expansion including the cost, conveyance of all materials, labour, labour cess, T&P, etc. complete as per the direction of the Engineer-in-charge
2
-
364.7
... More
Supplying & laying in trenches 110 mm dia Unplasticized UPVC Sewer Pipes including joiting with supplied solvent cement by non-heat application method including testing as per standard specification. all complete as per the direction of the Engineer-in-charge
10
-
471.2
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
12
-
304.6
... More
Furniture
-
-
-
... More
Supply Of Bed As Per Drawing Having Knocked Down Arrangement Including Cost, Cartage, Loading, Unloading & Stacking At Site With Folowing Technical Specification.
Size : 1950L X 900W X 750Mm (Head Side) & 450Mm (Overall) Height With Main Frame Structure Made Of 25Mm X 75Mm X 2Mm Thick Rectaungular Ms Pipe With 3 Extra Middle Support Of 25.4Mm X 25.4Mm X 2Mm Thick Hollow Square Ms Pipe At Equal Distance. (Geeken Make Or Equivelent)
4
-
14818
... More
Supply Of steel almirah,2 door,4 adjustable self,thickness 0.8mm (W 915mmxD485mmxH1980MM) As Per Drawing / specification Including Cost, Cartage, Loading, Unloading & Stacking At Site With Folowing Technical Specification and direction of Engineer in charge..(Geeken Make or equivelent)
2
-
38417
... More
Supply Of medium Back chair with PP arm,Gas lift,Nylon base,mesh back 7 seat fabric tapastry As Per Drawing / specification Including Cost, Taxes, Cartage, Loading, Unloading & Stacking At Site With Folowing Technical Specification.(Geeken Make or equivelent)
2
-
10915
... More
Supply Of Visitor chair with,wooden arm,pipe frame,mesh back& seat fabric tapestry As Per Drawing / specification Including Cost, Cartage, Loading, Unloading & Stacking At Site With Folowing Technical Specification.(Geeken Make or equivelent)
4
-
6525
... More
Supply Of Executive Table with particle board top size W 1800xD1650xH750As Per Drawing / specification Including Cost, Cartage, Loading, Unloading & Stacking At Site With Folowing Technical Specification.(Geeken Make or equivelent)
2
-
46649
... More
CONSTRUCTION OF ELECTRIC PANEL ROOM
-
-
-
... More
Earthwork in excavation of foundation trenches for columns, basement, tie beams, walls and steps in All Kind of soil including moorum, hard stony earth, earth mixed with boulders, Laterite rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the
work complete as directed by the Engineer-in-charge.
-
-
-
... More
1.5 m initial lift.
93.14
-
211.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge of earth work.
167.7
-
117.4
... More
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with betonies solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured up to bottom of pile cap)(dia.450mm).
752.4
-
1830
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. :
-
-
-
... More
Initial vertical load test for single pile
1
-
44717.75
... More
Routine vertical load test for single pile
1
-
16028.7
... More
Uplift load testing of pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable uplift load on pile etc. complete as per specification & the direction of Engineer-in-Charge.
1
-
16028.7
... More
Plain Cement concrete (1:4:8)in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.
72.12
-
4072.3
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, RCC Wall, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
In Foundation
-
-
-
... More
a) Column footing, Pedestal , Pile Cap,base slab etc
72.74
-
5105.55
... More
b) Plinth Beam
31.74
-
5465.7
... More
c) Column up to Plinth beam
11.76
-
10949.6
... More
Ground Floor
-
-
-
... More
a) Column & beam
51.3
-
10949.6
... More
b) Roof slab
57.75
-
9317.2
... More
c) RCC Wall
10.11
-
9452
... More
REINFORCEMENT WORK
-
-
-
... More
Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
438.93
-
8605.8
... More
FLYASH BRICK WORK
-
-
-
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge..
-
-
-
... More
Ground Floor
94.72
-
4338
... More
PLASTERING WORK
-
-
-
... More
Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts, beam soffit & sides & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
385
-
149.8
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
... More
Ground Floor
442.4
-
142.9
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
... More
Ground Floor
462.4
-
204
... More
FLOORING WORK
-
-
-
... More
Providing 16mm. thick finished kota stone flooring using kota stone slab above 0.10 sqm of approved quality, colour and size in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp sand for mortar and with cement grouted with neat white cement slurry laid in proper slope joining the marble slab with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including,grinding,moulding, rubbing mechanically and wax polishing etc.all complete in all respect as directed by the Engineer-in-charge.
(Note- Sample of stone tiles shall be approved before procurement and use.)
-
-
-
... More
Ground Floor
350
-
746.2
... More
Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 12mm. thick bed of cement mortar mix of (1:3) with screened and washed sharp sand for mortar and with cement grouted with neat white cement slurry laid in proper slope joining the marble slab with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including grinding,moulding,rubbing mechanically and wax polishing etc. all complete in all respect as directed by the Engineer-in-charge. (Note- Sample of stone tiles shall be approved before procurement and use.)
-
-
-
... More
Ground Floor
8.43
-
858.6
... More
Supplying, fitting and fixing in position 25mm thick cement concrete tile of approved make, quality, colour and size in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour,sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge. (Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
... More
Ground Floor
55
-
482.7
... More
PAINTING WORK
-
-
-
... More
Providing and applying Finishing inside wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T & P etc complete as per direction of Engineer-in-charge..
-
-
-
... More
Ground Floor
847.4
-
73.6
... More
Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
847.4
-
143.9
... More
Providing and applying two coats of weather seal coat of approved shade, Exterior Grade of approved make, quality and shade to the external surface of the building over a coat of primer of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)procurment & use)
-
-
-
... More
Ground Floor
462.4
-
136.7
... More
DOOR & WINDOW FIXING
-
-
-
... More
Supplying and fitting - fixing of Un-Plasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL VEKA LTD.) Three Track Three Panel / Two Track Two Panel sliding window--60- Series duly manufactured using UPVC Reinforced profile of 108mmx45mm x 2.5mm for outer frames and window sash of 39mmx58mmx2.25mm for capable of mounting single glazing system,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefebricated & welded through fusion welding the window frame shall be shall be fitted with 6 mm thick clear toughen glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance and the system is to be installed using Reinforced large coupler at the site using anchore fastners,silicon rubber sealant,easy glazing/deglazing at site etc.including cost and conveyance of all materials,accessories,labour charge,material and product conforming to ASTM D 638-14,EN-477-95 and other applicable code and standards all complete as per direction of Engineer in charge.
21.78
-
5984
... More
Supplying and fitting - fixing of Un-Plasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL VEKA LTD.) Casement door -60- Series duly manufactured using UPVC Reinforced profile of 60mm x 55mm x 2.5mm for outer frames,102mmx60mmx2.25mm for casement door sash profile and 74mmx60mmx2.5mm mulion profile capable of mounting single glazing system,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0mm prefebricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistance accessories like clipping locking system made of alluminium 1 no.per set of sashes and the system is to be installed at the site using anchore fastners,silicon rubber sealant,easy glazing/deglazing at site etc.including cost and conveyance of all materials,accessories,labour charge,material and product conforming to ASTM D 638-14,EN-477-95 and other applicable code and standards all complete as per direction of Engineer in charge.
5.04
-
8963
... More
Supplying, fitting and fixing of M.S Grill & gate ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard
crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
396
-
82.1
... More
Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use.
-
-
-
... More
Ground Floor
6.93
-
197.3
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer including the cost, conveyance, taxes of all materials, cost of all labour, labour cess,etc. as per the direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
3.47
-
4194.2
... More
WATER PROOFING TREATMENT
-
-
-
... More
Providing and laying water proofing treatment in Roof Terrace by applying cement slurry mixed with water proofing cement compound consisting of applying application of two coats of Sika Topseal 109hi with Sika fab-1 @2.2kg/sqm. side wall surface to protect against leakage & seepage finally covered with a cement mortar (1:4). Proper penetration points with Sikagard 694 fi (moisture resistance epoxy putty)The rate includes the cost of all materials, cost of alll labour,T&P required for the work with preparation of surface , treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry etc. in all floors as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor Terrace
385
-
672.15
... More
Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor Terrace
385
-
304.7
... More
CONSTRUCTIONS OF APPROACH ROAD
-
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. - In area of thorny jungle Road & site grading
1421.75
-
5.96
... More
Earth work in excavation of foundation trenches in Ordinary Soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
152.46
-
145.4
... More
Embankment Construction with Material Obtained from Borrow Pits Construction of embankment with approved material having CBR7 obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1, 300-2 and as per relevent clauses of section-300.including cost of leads, transporting to site, spreading, grading to required slope and compacting,all labour, T&P etc. complete as directed by the Engineer-in-charge.
3241.03
-
162.5
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrowpits having CBR not less than 5% with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300-2and as per relevent clauses of section-300.including cost of leads, transporting to site, spreading, grading to required slope and compacting,all labour, T&P etc. complete as directed by the Engineer-in-charge.
210.54
-
197.87
... More
Supplying, providing laying in approved layer thickness to line grade cross section and constructing Granular Sub-Base close graded Grading IV as shown in the drawing using crushed stone aggregate conforming to grading specified in (Table 400-I /400-I A) & in accordance with physical requirement in BS 812 Part III, Technical specification Part I/II of specification for road and bridge works MORT&H (4th revision) spreading the same with motor grader of adequate capacity with hydraulic controlled blades & compacting the same with vibratory roller of minimum 80 to 100KN static weight or of equivalent capacity, to achieve minimum required density including full compensation to all operations, all inclusive costs, contigencies, incidentals, involved for finished defect free item of work complete to specification & as directed by the Engineer or his representative to satisfaction. Internal & External road
52.63
-
1453.44
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing all complete as direction of EIC.
71.69
-
2624.1
... More
Construction of un-reinforced, dowel jointed, Plain Cement Concrete Pavement using M-30 Grade Concrete over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including form work , provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing. all complete as per direction of EIC.
73.2
-
5683.2
... More
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
6.05
-
503.18
... More
Providing and laying 700mm dia Non Pressure NP-4class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete as per direction of Engineer in charge.
30.25
-
4563.6
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
68.06
-
4645.2
... More
Supplying and provding stone Pitching on slopes using sound ,hard, durable and fairly regular in shape and weighing each stone not less than 40 kg, as per drawings and Clause 2504 of Technical specification for Road & Bridge works MORTH (5th revision) and as direction of Engineer in charge.
282.93
-
1785
... More
Providing and fixing Stainless Steel (Grade 416) railing made of hollow tubes, channels, plates, etc. including welding, grinding, buffing, polishing, curvaturing and fixing the same with necessary stainless steel nuts & bolts including fixing the railing with necessary accessories and stainless steel dash fasteners, etc. complete in all floors as per the direction of Engineer-in-charge.
(Payment will be made on the weight of stainless steel members excluding the accessories such as nuts, bolts, fasteners, etc.)
1914
-
468.3
... More
Supplying, fitting and fixing of M.S. grills in Gate including screws as may be required etc with cost, conveyance, of all materials, labour, T&P etc. required for the complete in all respect.
484
-
81.8
... More
Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use)
24.2
-
197.3
... More
COMMON BOUNDARY WALL FOR EXISTING INTAKE WELL & PROPOSED INTAKE WELL
-
-
-
... More
Earthwork in excavation of foundation trenches for columns, basement, tie beams, walls and steps in All Kind of soil including moorum, hard stony earth, earth mixed with boulders, Laterite rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
1.5 m initial lift.
1396.03
-
211.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge of earth work.
3459.36
-
117.4
... More
Plain Cement concrete (1:4:8)in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.
61.75
-
4072.3
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, RCC Wall, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
a) Column footing, Pedestal , Pile Cap etc
524.64
-
5105.55
... More
b) RCC wall
243.44
-
9452
... More
Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
768.08
-
8605.8
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
-
-
-
... More
In Foundation & Plinth
56.25
-
4304.8
... More
Providing and applying two coats of weather seal coat of approved shade, Exterior Grade of approved make, quality and shade to the external surface of the building over a coat of primer of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)procurment & use)
400
-
136.7
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for compound wall fencing. complete as per drawing including priming with one coat of red oxide primer in all floors as per the direction of the Engineer-in-charge.
120.36
-
82.6
... More
Supplying, fitting and fixing of M.S grills & Gate ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge.
429.18
-
81.8
... More
Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use.
50
-
197.3
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
100
-
330
... More
Supplying and provding stone Pitching on slopes using sound ,hard, durable and fairly regular in shape and weighing each stone not less than 40 kg, as per drawings and Clause 2504 of Technical specification for Road & Bridge works MORTH (5th revision) and as direction of Engineer in charge.
665
-
1700
... More
Provideing weep holes in brick masonary/plain/reinforced concrete abutement,wing wall/return wall with 100mm dia AC pipe,extending through the full width of the structure with slope 1V:20H towards drawing foce.complete as per drawing and technical specifications.complete in all respect and as per direction of engineer in charge.
148
-
200
... More
ROAD WIDENING
-
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. - In area of thorny jungle Road & site grading
1229.8
-
5.96
... More
Excavation for roadway by mechanical means in all kinds of soil except rock to requried size and shape as shown in the drawing, trimming sides, to required shape levelling the bed to line and grade as per Cl. 301 and Cl. 112 of technical specifcation part I / II specification for road & bridge work MORT&H (4th revision) including stacking the useful material for reuse in embankment within the road land and disposal of unuseful material away from road land including full compensation to all operations, all inclusive costs, contigencies, incidentals involved for the finished defect free item of work to specification complete and as directed by the Engineer or his representative to satisfaction.
676.39
-
211.4
... More
Construction of embankment in approved layers with approved materials free from Logs, stumps, roots, rubish obtained & deposited at road land from roadway cutting, drainage excavation and compacting at OMC to achieve minimum required density as under Cl. 305 table 3001-1 & 300-2 and Cl. 112 of technical specification Part I / II of specification for road and bridge works, MORT&H (4th revision) including full compensation to all operations, all inclusive costs, contigencies incidentals involved for the finished defect free item of work complete to specifications as per direction of Engineer or his representative to satisfaction.
66.64
-
66.64
... More
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.,all labour, T&P etc. complete as directed by the Engineer-in-charge.
405.83
-
21.85
... More
Supplying, providing laying in approved layer thickness to line grade cross section and constructing Granular Sub-Base close graded Grading IV as shown in the drawing using crushed stone aggregate conforming to grading specified in (Table 400-I /400-I A) & in accordance with physical requirement in BS 812 Part III, Technical specification Part I/II of specification for road and bridge works MORT&H (4th revision) spreading the same with motor grader of adequate capacity with hydraulic controlled blades & compacting the same with vibratory roller of minimum 80 to 100KN static weight or of equivalent capacity, to achieve minimum required density including full compensation to all operations, all inclusive costs, contigencies, incidentals, involved for finished defect free item of work complete to specification & as directed by the Engineer or his representative to satisfaction. Internal & External road
202.92
-
1453.42
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing all complete as direction of EIC.
178.04
-
2624.1
... More
Construction of un-reinforced, dowel jointed, Plain Cement Concrete Pavement using M-30 Grade Concrete over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing.
228.8
-
5683.2
... More
CONSTRUCTIONS OF HT METERING ROOM
-
-
-
... More
Earthwork in excavation of foundation trenches for columns, basement, tie beams, walls and steps in All Kind of soil including moorum, hard stony earth, earth mixed with boulders, Laterite rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the
work complete as directed by the Engineer-in-charge.
-
-
-
... More
1.5 m initial lift.
20.7
-
211.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge of earth work.
45.31
-
117.4
... More
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with betonies solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured up to bottom of pile cap)(dia.450mm).
152
-
1830
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. :
-
-
-
... More
Initial vertical load test for single pile
1
-
44717.75
... More
Routine vertical load test for single pile
1
-
16028.7
... More
Uplift load testing of pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable uplift load on pile etc. complete as per specification & the direction of Engineer-in-Charge.
1
-
16028.7
... More
Plain Cement concrete (1:4:8)in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.
6.51
-
4072.3
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, RCC Wall, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
In Foundation
-
-
-
... More
a) Column footing, Pedestal , Pile Cap etc
9.53
-
5105.55
... More
b) Plinth Beam
3.96
-
5465.7
... More
c) Column up to Plinth beam
0.59
-
10949.6
... More
Ground Floor
-
-
-
... More
a) Column & beam
7.03
-
10949.6
... More
b) Roof slab
7.43
-
9317.2
... More
c Lintel
0.97
-
8781.4
... More
REINFORCEMENT WORK
-
-
-
... More
Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
61.64
-
8605.8
... More
FLYASH BRICK WORK
-
-
-
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
-
-
-
... More
In Foundation & Plinth
6.93
-
4304.8
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge..
-
-
-
... More
Ground Floor
24.5
-
4338.1
... More
Providing Fly Ash brick masonry work with fly ash bricks 23cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 4 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. Half Brick
-
-
-
... More
Ground Floor
17.57
-
4540.2
... More
PLASTERING WORK
-
-
-
... More
Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts, beam soffit & sides & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
27.5
-
158.9
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
... More
Ground Floor
73.11
-
142.9
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
... More
Ground Floor
108.86
-
204
... More
FLOORING WORK
-
-
-
... More
Providing 16mm. thick finished kota stone flooring using kota stone slab above 0.10 sqm of approved quality, colour and size in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp sand for mortar and with cement grouted with neat white cement slurry laid in proper slope joining the marble slab with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including,grinding,moulding, rubbing mechanically and wax polishing etc.all complete in all respect as directed by the Engineer-in-charge.
(Note- Sample of stone tiles shall be approved before procurement and use.)
-
-
-
... More
Ground Floor
27.5
-
746.2
... More
Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 12mm. thick bed of cement mortar mix of (1:3) with screened and washed sharp sand for mortar and with cement grouted with neat white cement slurry laid in proper slope joining the marble slab with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including grinding,moulding,rubbing mechanically and wax polishing etc. all complete in all respect as directed by the Engineer-in-charge. (Note- Sample of stone tiles shall be approved before procurement and use.)
-
-
-
... More
Ground Floor
2.2
-
858.6
... More
PAINTING WORK
-
-
-
... More
Providing and applying Finishing inside wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T & P etc complete as per direction of Engineer-in-charge..
-
-
-
... More
Ground Floor
73.11
-
73.6
... More
Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
73.1
-
143.9
... More
Providing and applying two coats of weather seal coat of approved shade, Exterior Grade of approved make, quality and shade to the external surface of the building over a coat of primer of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)procurment & use)
-
-
-
... More
Ground Floor
98.97
-
136.7
... More
DOOR & WINDOW FIXING
-
-
-
... More
Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard
crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
84
-
81.8
... More
Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use.
-
-
-
... More
Ground Floor
2.31
-
197.3
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer including the cost, conveyance, taxes of all materials, cost of all labour, labour cess,etc. as per the direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
2.31
-
4194.2
... More
WATER PROOFING TREATMENT
-
-
-
... More
Providing and laying water proofing treatment in Roof Terrace by applying cement slurry mixed with water proofing cement compound consisting of applying application of two coats of Sika Topseal 109hi with Sika fab-1 @2.2kg/sqm. side wall surface to protect against leakage & seepage finally covered with a cement mortar (1:4). Proper penetration points with Sikagard 694 fi (moisture resistance epoxy putty)The rate includes the cost of all materials, cost of alll labour,T&P required for the work with preparation of surface , treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry etc. in all floors as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor Terrace
27.5
-
672.15
... More
Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor Terrace
27.5
-
304.7
... More
Internal Electrical Expenses
-
-
-
... More
Supply ,installation ,testing and commissioning(SITC) of 6.6kV Indoor Air Insulated switchgear Panel Module (consisting of 2 nos.-Incomer Panel, 6 nos.-Outgoing Panel, 1 nos.-Bus Coupler Panel, 1 nos.-Bus Raiser Panel, 2 nos.-Bus PT Panel) including 1 nos.-Earthing Truck & all accessories
-
-
-
... More
a)INCOMER PANEL-2 Nos.:6.6kV Indoor Air Insulated switchgear Panel consisting of Breaker-800A, Busbar1250A(Copper) & CT (800-400/5-5-5A) for Transformer Protection Relays to be installed on the panel, Multi-function Meter to be installed above the panel, Energy meter to be installed on the panel. b)OUTGOING PANEL-6 Nos.:6.6kV Indoor Air Insulated switchgear Panel consisting of Breaker-630A, Busbar-1250A (Copper), CT (600-300/5-5-5A) for Feeder protection Relays to be installed on the panel, Multi-function Meter to be installed above the panel, Energy meter to be installed on the panel. c)BUS COUPLER & BUS RAISER:6.6kV Bus-Coupler Indoor AIS Panel consisting of Breaker-800A, Busbar-1250A(Copper) & CT (800-400/5-5A) for bus coupler.Relays to be installed on the panel, Multi function Meter to be installed above the panel, Energy meter to be installed on the panel. d)BUS PT PANEL-2 Nos.:6.6kV, 2 Core, Single Phase, IVT (6.6/√3 kV / 110/√3-110/√3V), 3nos in a set, in a separate draw out chamber with Digital Voltmeter inside Control Room separately for Bus-1 & Bus-2 plug in type with disconnector along with PT removal trolly.
1
-
23171925
... More
6.6kV Soft Starter (Indoor Type)
-
-
-
... More
Supply ,installation ,testing and commissioning(SITC) of FCMA type Soft Starter with Vacuum bypass Contactor, C.T, Ammeter, RTD's, PLC, Current Transducer, and Indicating Lamps including control circuit to be connected at Line Side of the H.T. Motor.
6
-
914606
... More
Supply ,installation ,testing and commissioning(SITC) of 1.1kV Indoor Floor/Wall mounted shade, dust, damp & vermin proof AC distribution Board Panel made out of 2mm thick CR sheet metal cubicle fixed on M.S. channel base (duly acid treated for derusting, primered and painted with 2 coats of enamel paint) having two side front opening door arrangement with provision for bottom/side cable/conduit entry & earthing studs arrangement as per specification. Also having duly factory wired conforming to the relevant IS/IES standard and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.
-
-
-
... More
AC Distribution Board for Control RoomIncomer:400Amp, 4P MCCB, 50 KA with adjustable thermal settingBus bar:600A Al, Busbar duly sleeved ( Current Density = 1A/sqmm )Outgoing: 160Amp, 3P MCCB, 36 KA with adjustable thermal setting- 1 nos.Outgoing: 100Amp, 3P MCCB, 36 KA with adjustable thermal setting- 2 nos.Outgoing: 63Amp, 4P MCB, 36 KA with adjustable thermal setting- 5 nos.Outgoing: 32A 3P MCB, 36kA- 8 nos.Outgoing: 16A 3P MCB, 36kA- 12 nos.Outgoing: SPD 40 KA ( 3P+N) - 1 nos. CT: 400/1A,CL-1 for metering CTs- 3 nos. Voltmeter: 0-500V flush mounted digital with selector switch- 1 nos. Ammeter: 0-500A AC flush mounting digital with selector switch- 1 nos.Indicator: LED type phase indicating lamps with control fuses - 1 set
1
-
240847
... More
AC Distribution Board for Motor RoomIncomer:100Amp, 4P MCCB, 36 KA with adjustable thermal settingBus bar:300A Al, Busbar duly sleeved ( Current Density = 1A/sqmm )Outgoing: 32Amp, 3P MCB, 36 KA with adjustable thermal setting- 3 nos.Outgoing: 16Amp 3P MCB, 36kA- 3 nos.SPD 40 KA ( 3P+N)- 1 nos. CT: 200/1A,CL-1 for metering CTs- 3 nos. Voltmeter: 0-500V flush mounted digital with selector switch- 1 nos. Ammeter: 0-500A AC flush mounting digital with selector switch- 1 nos.Indicator: LED type phase indicating lamps with control fuses - 1 set
1
-
75574
... More
AC Distribution Board for Rest Room Incomer:63Amp, 3P MCCB, 36 KA with adjustable thermal settingBus bar:100A Al, Busbar duly sleeved ( Current Density = 1A/sqmm )Outgoing: 40Amp, 3P MCB, 36 KA with adjustable thermal setting- 3 nos.CT: 100/1A,CL-1 for metering CTs- 3 nos. Voltmeter: 0-500V flush mounted digital with selector switch- 1 nos. Ammeter: 0-500A AC flush mounting digital with selector switch- 1 nos.Indicator: LED type phase indicating lamps with control fuses - 1 set
1
-
26828
... More
Supply ,installation ,testing and commissioning(SITC) of 48V Indoor Floor mounted Battery bank including Charger & DCDB panel, conforming to the relevant IS/IES standard and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.
-
-
-
... More
Supply ,installation ,testing and commissioning(SITC) of 48V, 150AH Maintenance free VRLA battery (Set of 4 nos. of 12V Battery)
1
-
62721
... More
Supply ,installation ,testing and commissioning(SITC) of 48V Float-cum-Boost Battery Charger (15A Float Charging & 20A Boost Charging) with DCDB panelDC Distribution Board for Control Room.Incomer:300Amp, Double Pole DC MCCB- 1 nos.Bus bar:400A, Copper Busbar.Outgoing: 25Amp, Double Pole DC MCB - 12 nos.CT: 400/1A,CL-1 for metering CTs- 3 nos. Voltmeter: 0-300V DC - 1 nos. Ammeter: 0-300A DC - 1 nos. Ammeter: 0-300A DC - 1 nos.Indicator: LED type phase indicating lamps with control fuses - 1 set
1
-
156803
... More
Supply ,Installation ,Testing and Commissioning(SITC) of fully factory assembled Variable Refrigerant Volume(VRV)-X type multi unit air condioning system with inverter type outdoor units with individual controller for cooling type operations (12 nos. of R.F CASSETTE AC with Cordless Remort, Nominal Capacity-4.6 TR)
-
-
-
... More
Supply ,installation ,testing and commissioning(SITC) of 12 nos. of R.F CASSETTE AC with Cordless Remort, Nominal Capacity-4.6 TR
1
-
5224286
... More
Fire Extinguiser System (Indoor Type)
-
-
-
... More
Supply & installation of 9 ltrs. Foam type
4
-
6579
... More
Supply & installation of 4.5 ltrs. CO2 type
4
-
9258
... More
Supply & installation of 9 kg Dry Powder type
4
-
5916
... More
Fire bucket with GI stand & GI Canopy (4 buckets/stand)
2
-
5000
... More
Chequered Plate
-
-
-
... More
Supply & fixing of Hot Rolled MS Chequered plate of dimension Width-1524mm X Length-3048mm X Thickness-6mm (226.730kg/piece)
12
-
12199
... More
HT Rubber Mat
-
-
-
... More
Supply and fixing of HT rubber mat of Length-1000mm X Width-1000mm X Thickness-2.5mm in font of Distribution Boards at different labs as required complete as per direction of Engineer-in-charge.
40
-
616
... More
Supply & installation of Prefabricated, perforated GI cable trays made of GI sheets continuously connected including horizontal and vertical bends, tees, coupling plate and nut bolts washers & all material required for installation i.e Tie Rods, GI angles, Channels, earth link etc, conforming to Technical Specifications, complete as required. (Standard conventional Design)
-
-
-
... More
Supply & Fixing of hot dipped galvanised iron cable tray of dimension 600mm width X 75mm depth X 2mm thickness along with all fittings
700
-
1747
... More
Supply & Fixing of hot dipped galvanised iron cable tray bends for 600mm width X 75mm depth X 2mm thickness size cable tray along with all fittings
20
-
3542
... More
Supply & Fixing of hot dipped galvanised iron cable tray tees for 600mm width X 75mm depth X 2mm thickness size cable tray along with all fittings
10
-
4181
... More
Supply & Fixing of hot dipped galvanised iron cable tray cross members for 600mm width X 75mm depth X 2mm thickness size cable tray along with all fittings
10
-
4181
... More
HT Cable & Jointing Kit
-
-
-
... More
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 11000 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge.
-
-
-
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 6.6kV, 3C, 120sqmm, Al., XLPE pressure extruded PVC innersheath, round wire armouring, FRLS PVC inner & outer sheath type UG Cable
1000
-
3036
... More
Supply & erection of Heat Shrinkable type Straight through jointing kit suitable for 6.6kV, 3C, 120sqmm, Al., XLPE UG Cable
8
-
50531
... More
Supply & erection of Heat Shrinkable type Indoor termination kit suitable for 6.6kV, 3C, 120sqmm, Al., XLPE UG Cable
44
-
19038
... More
LT Cable & Jointing Kit
-
-
-
... More
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge.
-
-
-
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 4 core x 50 sqmm Aluminum round wire armoured, extruded PVC inner sheath & HR PVC outer sheath type UG cable
120
-
998
... More
Supply & erection of end termination with brass compression gland and aluminium lugs suitable for 4 core x 50 sqmm Aluminum armoured cable
4
-
1539
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 4 core x 16 sqmm Aluminum round wire armoured, extruded PVC inner sheath & HR PVC outer sheath type UG cable
150
-
443
... More
Supply & erection of end termination with brass compression gland and aluminium lugs suitable for 4 core x 16 sqmm Aluminum armoured cable for street lighting system
18
-
930
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 3 core x 2.5 sqmm copper armoured cable for street lighting system
150
-
258
... More
Control Cable
-
-
-
... More
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge.
-
-
-
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 4C, 2.5sqmm, CU armoured FRLS cable inside Panel Room
700
-
371
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 7C, 2.5sqmm, CU armoured FRLS cable inside Panel Room
700
-
602
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 10C, 2.5sqmm, CU conductor, armored, FRLS PVC sheathed Cable inside Panel Room
500
-
806
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 12C, 2.5sqmm, CU conductor, armored, FRLS PVC sheathed Cable inside Panel Room
500
-
925
... More
Supply ,Laying ,Testing and Commissioning(SLTC) of 1C, 16sqmm, copper conductor, armored, FRLS PVC sheathed Cable inside Panel Room
300
-
514
... More
Lightning Protection System
-
-
-
... More
Supply and fixing of lightning conductor finial, made of 25 mm dia 1000 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
30
-
1151
... More
Supply & Jointing of GI tape at base of lighting conductor finial
60
-
66
... More
Supply & Fixing of GI tape of size 20mm X 3mm flat in horizontal run direction
406
-
76
... More
Supply & Fixing of GI tape of size 20mm X 3mm flat in vertical run direction
300
-
91
... More
Earthing System
-
-
-
... More
Supply & Installation of Earthing pipe with 40mm dia 4.5 Mtr long Class-B GI Pipe(Jindal/Tata/Sail/Rinl) with earth chamber (Each pit resistance will be measured and recorded and shall be as per IS). Scope include supply of all required material like Earth Electrode, Salt, Charcoal, Nuts-Bolt ,40mm dia 3 Mtr GI pipe & PVC Pipe, PCC, and brick work for earthing chamber (Size: 450mmx450mmX600mm) and RCC or other suitable slab cover(earth resistance measurement and with in limit to be achieved by bidder).
35
-
5858
... More
SITC of Earthing Conductor: 50X6 mm GI Flat for Raiser from the burial earth mat to equipment, structure etc.)Scope of work includes fabrication,welding, laying, mounting , connecting the flat as per site requirement.
500
-
246
... More
SITC of Earthing Conductor: 75X10 mm GI Flat for Raiser from the burial earth mat to equipment, structure etc.)Scope of work includes fabrication,welding, laying, mounting , connecting the flat as per site requirement.
200
-
569
... More
Internal Wiring
-
-
-
... More
Recessed/surface wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC HMS rigid conduit with 6Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size ( Make-Legrand, Model-Mylinc), MS box with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havells /RR_Kable )
-
-
-
... More
Single light point/call bell controlled by one 6A switch GROUP-B
49
-
890
... More
Single light/fan/exhaust fan point controlled by one 6A switch GROUP-C
16
-
995
... More
6A Plug on the same board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked etc as per the direction of E.I.C.
4
-
619
... More
2x6A Plug on the separate board For TV/other point with complete fitting by 02 nos of 6A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved
4
-
1132
... More
Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor (FRLS), single core cable (Finolex/Polycab/L&T/RR_Kable) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS (AKG or any other equivallent reputed make ISI marked as approved) FRLS as required.
-
-
-
... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.
40
-
173
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.
70
-
205
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 4.0 sq. mm copper wire for earth continuty conductor.
200
-
358
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4.0 sq. mm copper wire for earth continuty conductor.
20
-
600
... More
Supply, delivery, installation & testing of AC boards consisting of 25A Modular switch with 25A Moular socket in indivisual Modular G.I Box making good the damages caused complete as required and as per direction of Engineer-in-charge.
14
-
1332
... More
Supplying and fixing of following sizes of Highly Mechanical Strenth class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
Size-20mm
60
-
89
... More
Size-25mm
90
-
105
... More
Supply, installation, of exhaust fan of heavy duty 150 mm sweep with louvers (make Havells/Crompton or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection etc as required and as per the direction of E.I.C
1
-
1292
... More
Supply, installation, of exhaust fan of heavy duty 600 mm sweep with louvers (make Havells/Crompton or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection etc as required and as per the direction of E.I.C
6
-
8375
... More
Supply, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells/CROMPTON Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc as required and as per the direction of E.I.C
8
-
2185
... More
Supply, installation, testing and commssioning of Modular type Fan regulator of 100 watt with 360 degree rotation ( Legrand Make or equivalent reputed make including inter connection etc as required and as per the direction of E.I.C
8
-
1028
... More
Supply and fixing of 80 watt Highbay fittings of CROMPTON or equivallent of Philips/Wipro to any other reputed make as approved etc as complete and as per the direction of E.I.C.
26
-
16901
... More
Supplying & installation, testing and commissioning of prewired, LED TUBE fittings with one No 20w watt,6K LED tube,of CROMPTON OR equivallent of Philips /Wipro
21
-
805
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral,double door MCB distribution board, 415 volts/240 volts, on recessed, complete with terminal blocks, duly prewired with suitable size FRLS PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar as required and as per direction of Engineer-in-charge
-
-
-
... More
BDB-Power 6Way(8+18) TPN Double Door DB),Incommer: 32A, 4P, RCB0s, 100mA,Outgoing: 15 nos 25A, SP MCB as per the SLD
1
-
17013
... More
BDB-/Light 8Way SPN Double Door DB),Incommer: 25A, 2P, RCB0s, 30mA,Outgoing: 4 nos 6A, SP MCB as per the SLD
2
-
9175
... More
BDB-LIGHT 6Way(8+18) TPN Double Door DB),Incommer: 25A, DP, RCB0s, 30mA,Outgoing: 23 nos 6A, SP MCB as per the SLD
1
-
19789
... More
Outdoor Lighting
-
-
-
... More
Supplying, Erection, Fixing, connection & testing of LED Street Light (Single arm) of HAVELLS/BAJAJ or equvalant reputed make ISI marked as approved make with specification LED Luminarie 45 Watt with 6 meter Velmond make or equivalent maintenance free G.I POLE with braket including MCB & MCB box for inspection as required.
4
-
27116
... More
Supplying, Erection, Fixing, connection & testing of LED Street Light (double arm) of HAVELLS/BAJAJ or equvalant reputed make ISI marked as approved make with specification LED Luminarie 45 Watt with 6 meter Velmond make or equivalent maintenance free G.I POLE with braket including MCB & MCB box for inspection as required.
4
-
29762
... More
Timer Panel
-
-
-
... More
S/I/T&Commissioning of LT OUTdoor WALL/FLOOR mounted double door type cubical type electrical main panel ( light ) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. ,In commer- 01 number of 63A 4P MCB. (make- LEGRAND or equivalent reputed make ISI marked), Busbar- 04 numbers of 70Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. , Out going- (i) 01 number TIME SWITCH,01 NO OF 70A TP POWER CONTACTOR FALLOWED BY, 6-32A SP MCB-15 NOS((make- Legrand or equivalent reputed make ISI marked)(FOR OUT LIGHT CIRCUIT) , Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.,(ii) 01 set of 0-60Amps Ameter with selecter switch & CTS.,(iii) 01 set of 0-500 voltmeter with selecter switch.
1
-
21622
... More
Shock Treatment Chart
-
-
-
... More
Supply and installation of Shock treatment chart ( both English, Hindi and Odia language) in different labs as required complete as per direction of Engineer-in-charge.as required and as per the direction of E.I.C
2
-
850
... More
RCC Cable Trench
-
-
-
... More
Providing all materials, labour, T&P required for construction of RCC M20 Grade Cable trench of size (1.20 Mtr width & 1.20 Mtr depth ) having cube strength 200 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, vertical wall & roof slab shall be not less than 150mm, 150mm & 150mm (avg.) respectively.PCC 1:4:8 with 40mm size h.g.c.b. metal of 100mm thick ,earth work excavation in all types of soil , filling the foundation with excavated earth, laying in layers not exceeding 23cm thick well watered & rammed, providing,fitting & fixing of 150mm thick pre-cast cover slab for opening of trench etc. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all supports and removing the same & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed). all complete as per direction of Engineer in charge.
60
-
10297
... More
GST as applicable extra
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements