Odisha Industrial Infrastructure Development Corporation Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha Industrial Infrastructure Development Corporation - IDCO Tender
Electrical and Electronics
Eprocure
Opening Date23 Dec 2022
Closing DateCancelled
Tender Amount₹ 7,01,46,621
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_IDCO_84594_1Bid Award Id
ViewTender No
PC/EST/E-120/2022-23Tender Authority
Odisha Industrial Infrastructure Development Corporation ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
.... do ..... of RMU 33kV 4-WAY 630A (2ISLTR+2 BKR) (LLVV) with AUX protection.
2
-
-
11kV Equipment (Indoor Type)
-
-
-
Supply,Installation,Testing & Commissioning of 30kV, 10kA, Metal Oxide, Class-2 (Station Class), Surge Arrester (for 33kV Incoming Line, HT side of 2nos. Power Transformers and 33/0.433kV Station Transformer) - Outdoor Type with Surge Counter with SCADA Compatibility, complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
6
-
-
...do.... of 12kV, 10kA, Metal Oxide, Class-2 (Station Class), Surge Arrester with out surge counter( For Transformers & Out Going Feeders) - Outdoor type.
6
-
-
...do.... of 11kV Indoor Air Insulated switchgear Panel consisting of Breaker-1250A, Busbar-2000A(Copper) & CT (800-400/1-1-1A) Horizontal draw type for Transformer Protection and Differential Relays to be installed on the panel, Multi-function Meter to be installed above the panel, Energy meter to be installed on the panel
2
-
-
...do.... of 11kV Indoor Air Insulated switchgear Panel consisting of Breaker-630A, Busbar-1250A (Copper), CT (400-200/1-1-1A) for Feeder protection
Relays to be installed on the panel, Multi-function Meter to be installed above the panel, Energy meter to be installed on the panel.
4
-
-
...do.... of 11kV Bus-Coupler Indoor AIS Panel consisting of Breaker-630A, Bus-bar-1250A (Copper), Relay, CT .Relays to be installed on the panel, Multi-function Meter to be installed above the panel, Energy meter to be installed on the panel.
1
-
-
...do.... of 11kV, 2 Core, Single Phase, IVT (Inductive Voltage Transformers)(11/√3 kV / 110/√3-110/√3V), 3nos in a set, in a separate draw out chamber with Digital Voltmeter inside Control Room separately for Bus-1 & Bus-2 plug in type with dis-connector.
2
-
-
SCADA
-
-
-
Supply ,Installation,Testing & Commissioning of complete SCADA system for Primary Substation complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
1
-
-
Transformer
-
-
-
Supply,Installation,Testing & Commissioning of 5.0 MVA, 33/11kV Power Transformer DYn11 (Outdoor Installation) with Accessories with SCADA Compatibility, complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
2
-
-
..........do..............of 100 kVA 33/0.433kV Energy efficient Station Transformer along with all HT & LT termination.
1
-
-
Substation Earthing System GI
-
-
-
Supply,Laying & Commissioning of Earthing Conductor 75X10 mm (5.89 Kg/Mtr.) GI Flat for laying (spacing maximum 2m both ways) complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
5301
-
-
....do.......of 50X6 mm (2.4Kg./Mtr.) GI Flat for Raiser from the burial earth mat to equipment, structure etc.)
720
-
-
Supply,Installation,Testing & Commissioning of Earthing Device & Associated Accessories (Heavy duty GI Perforated Pipe of ID=40mm & OD=50mm with 3000mm long for treated Earth Pit) complete (with supply of all required materials such as Salt, Charcoal, GI Nuts-Bolt-washer, construction materials for chamber & cover etc.) in all respect with earth chamber & cover as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC. (Each pit resistance will be measured and recorded and shall be as per IS)
40
-
-
33kV, 11kV and Station Trf Structure
-
-
-
Supply & Erection of (125x70x5) mm RS GI joist 5Mtr (13.3kg / Mtr) (04 nos for one Power Transformer) for supporting of 33kV Cable & 11kV cable (Unit Wt=0.0665 MT) & 10 mm thick MS plate size 250X250 mm at the bottom of the RS Joist duly welded & the MS plate to be suitably grouted to the floor for the rigidity, complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
532
-
-
...........do..........of (100 x 50 x5) mm GI Channel (9.56kg / Mtr) (2Mtr - 06 nos for one Power Transformer) for supporting of 33kV & 11kV power Cable (Unit Wt=0.01912 MT)
229.44
-
-
Supply & Fixing of GI Nuts & Bolts etc. for column and beam & Equipment Structures
500
-
-
Supply & Erection of GI Pipe of dia. 150mm, Class-B
150
-
-
Supply & Laying of High Density Polyethylene (HDPE) pipe 160 mm diameter.
0.01
-
-
Supply,Installation,Testing & Commissioning of LTDB for 100kVA, 33/0.433kV Station Transformer with SCADA Compatibility, complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
1
-
-
..............do............ of 8way LDB with accessories.
2
-
-
33 and 11 kV Power and Control, XLPE cables
-
-
-
Supply,Laying, Testing & Commissioning of 33kV, 1Core, 400sqmm, XLPE insulation (extruded type) ,(Armoured), A2XFY UG cable (with one single 1core, 400sqmm, XLPE cable as spare) in trefoil formation by open trench method, complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
2
-
-
....do.......... of In-door termination kits Heat Shrinkable type suitable for 33kV, 1Core, 400sqmm, HT UG Cable kits for 1Core
52
-
-
....do.......... of Outdoor termination kits Heat Shrinkable type suitable for 33kV, 1Core, 400sqmm, HT UG cable kits
24
-
-
............do............ of 11kV, 3core, 400sqmm, aluminium, XLPE insulation, A2XFY armoured (extruded type) UG cable by open trench method.
1.5
-
-
............do............ of Indoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 400sqmm, aluminium UG cable kits for 3core (set)
16
-
-
............do............ of Outdoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 400 sqmm, aluminium UG cable kits for 3Core (Set)
16
-
-
Supply,Laying, Testing & Commissioning of Control Cables (Copper Armoured) complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
-
-
-
4 Core x 2.5 mm2
0.7
-
-
7 Core x 2.5 mm2
0.7
-
-
10 Core x 2.5 mm2
0.5
-
-
12 Core x 2.5 mm2
0.5
-
-
1 Core x 16 mm2 Aluminium cable from Battery to Battery Charger & Battery Charger to DCDB
0.3
-
-
Supply & Laying of 1.1 kV XLPE Power Cables complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
-
-
-
XLPE 3 1/2 Core x 120 mm2 ( for Station Transformer output )
0.15
-
-
XLPE 3 1/2 Core x 95 mm2 ( for Oil Filtration Machine Connection )
0.1
-
-
XLPE 3 1/2 Core x 25 mm2 ( for Switchyard Lighting )
0.3
-
-
XLPE 4 Core 16 mm2 ( for Switchyard Lighting )
0.3
-
-
XLPE 2 Core 16 mm2 ( for Switchyard Lighting )
0.3
-
-
Battery & Battery Charger
-
-
-
Supply,Installation, Commissioning , Wiring & Testing of 48 V, 100 AH, maintenance free VRLA( Valve Regulated Lead Acid) Battery (Set. 4 Nos of 12V Battery with 150AH), complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
1
-
-
....do........ of 48V, Float cum Boost Battery Charger (15 A float charging, 20 A boost charging)
2
-
-
Sub-station Lighting And Fire Fighting System with complete wiring/cabling
-
-
-
Supply,Installation & Commissioning of Sub-Station Switchyard Lighting , Control Room Lighting (internal & external) complete as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.(it includes supply of fixtures & Lamps (LED); 120W, 100W with switch gear, GI tubular poles, GI Conduit, cables, Copper wires swith/plug, DBs etc., Tube fittings, fans etc as per the requirement -maintaining suitable/required Lux levels complete.
1
-
-
Supply,Installation, Commissioning & Testing of 1.5 Ton capacity Split Air Conditioning units with Remote control facility: Including supply of split Air conditioner 5 Star rated, voltage stabiliser, control boxes etc. for completing the A.C scheme. (As per specification) for control room, complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
4
-
-
.......do....... of 1400 mm sweep 250Volt A/C Celling Fan
5
-
-
.......do....... 300 mm sweep 70W A/C Exhaust Fan ( for Battery room and Toilet )
4
-
-
Fire Detection Alarm System
-
-
-
Supply,Installation,Testing & Commissioning of Main Fire ALARM Control Panel (Ul /FM /Ulc/Vds Approved),Intelligent Addressable Modular Fire Alarm Control Panel based on 32 bit microprocessors including the following as per specification.,(A) Battery charger,(B) SMF(sealed maintainance free) Batteries for 72 Hrs. back-up,(C) Enclosure,(D)min.240 character LCD display,( Other specification as mentioned),(E) The panel should be modular,decentralized, with CPU /master control unit, loop cards, relay and interface card by means of duplicated electronics means hardware redundancy with full functionality.(F) The panel must provide MODBUS/ RS485 port for integration with SCADA.(G)The loop should be capable to have at least 50 elements / devices, complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
1
-
-
.......do.......... of Intelligent Addressable multi sensor Detector- (Smoke + Fixed Tempt. + Rate of rise tempt.) For ceiling (UL /FM /ULC/Vds Approved) inclusive of base and other installation accessories. (must have inbuilt short circuit isolator)
6
-
-
.......do.......... of Intelligent Addressable multi sensor Detector- (Smoke + Fixed Tempt. + Rate of rise tempt.) For trench (UL /FM /ULC/Vds Approved) inclusive of base and other installation accessories. (must have inbuilt short circuit isolator)
2
-
-
.......do.......... of Response Indicator ( Twin LED transparent type)
2
-
-
.......do.......... of Addressable manual Call Point (must have inbuilt short circuit isolator,) (UL /FM /ULC/Vds Approved)
1
-
-
.......do.......... of Electronic Hooter/Multi tone sounder (must have inbuilt short circuit isolator,) (UL /FM /ULC/Vds Approved) Indoor type.
1
-
-
Supply,Laying & Testing of 2 Core X 1.5 sq.mm copper conductor, armored, RED colour FRLS PVC sheathed signal Cable confirming to IS standards and specifications
150
-
-
Supply,Laying & Testing of 4Cx2.5sqmm copper armoured FRLS cable confirming to IS standard with accessories (Gland, lug, saddle, etc.)
15
-
-
Supply & Installation of steel wire reinforced flexible conduit pipe (16MM) with all accessories.
15
-
-
Supply & Installation of Surge Arrester
1
-
-
Supply & Installation of Lightning Rod in Top of PSS Building.
1
-
-
Fire Fighting System (portable and wheel mounted sets for control room);
-
-
-
Supply & Installation of Foam type- 5 Ltrs
2
-
-
Supply & Installation of CO2 - 4.5 Kgs
2
-
-
Supply & Installation of Dry powder 4.5 Kg
2
-
-
Supply & Installation of Fire Bucket with Stand (4nos. in each Stand)
4
-
-
AC & DC System for Auxiliary supply complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
-
-
-
Supply,Installation,Testing & Commissioning of Main Lighting Distribution Board (as per specification),complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
1
-
-
..........do........... of Indoor Lighting Distribution Board as per specification
1
-
-
..........do........... of Receptable Panel near Power Transformer
1
-
-
DC System
-
-
-
Supply,Installation,Testing & Commissioning of 48 V DC Distribution Board (as per specification),complete in all respect as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC.
2
-
-
.........do........... of Water Cooler with water Purifier System
1
-
-
.........do........... of Maintenance Testing Equipment as per Technical Specification
1
-
-
.........do........... of Tools and Plants (T&P's) Requirement as per Technical Specification
1
-
-
Supply & Commissioning of Office Furniture as per Technical Specification,complete in all respect as required & as per GTP/drawing approval by TPSODL & direction of EIC.
1
-
-
Supply & Installation of Materials for Installation of Power Transformer on Plinth (complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC. )
-
-
-
90 lb Rail 5.4 mts ( 2.7x2) 44.62 kg per mtr / Transformer each (Unit Wt=0.240 MT)
2
-
-
(500x500x10) mm GI plate 6 nos / Transformer each (Unit Wt=0.013 MT)
6
-
-
(65x65x5) mm GI angle of 5.4 mts length.4.9 kg/mtr. / Transformer each (Unit Wt=0.026 MT)
2
-
-
Construction of Cable Trench :
-
-
-
Supply of all required materials and making of 2 tier 2 rows U-Type RCC Cable trench with M-20 Grade concrete: The internal width 2000 mm, depth 1005 mm, with 75X75X6 mm support angles fixed RCC wall of 175 X 175 mm, Raft of 175mm & with ladder type cable tray (45X45X5)mm two angles at both side having welded flats of 25X5 mm at a gap of 150mm) for Power & control Cable with RCC Trench Cover Slab as per technical Specification, approved drawing and Direction of Engineer Incharge. Complete work including earth work in excavation in all kind of soil & rock and refilling the cavity by selective soil, leveling the surface around the pit with disposal of surplus earth complete in all respect as required & as per technical specification & GTP/Drawing approval by TPSODL & direction of EIC.
71.85
-
-
......do.......... of Chequered plate 1000X300X5.6mm thick for Cable Trench in side Control Room 12 Mtr.
640
-
-
33KV Line DP-2No's
-
-
-
Supply, Fabrication & Installation of 13 Mtr. H Pole, including excavation, refilling, 1:1.5:3 , M20 Grade cement concreting of size - 500(B)x500(W)X2200(H) , and
couping of 500(B)x500(W)x450(H) and and zebra painting (In Black & Yellow Strips) complete in all respect as required & as per technical specification & GTP/Drawing approval by TPSODL & direction of EIC.
4
-
-
Supply, Fabrication & Installation of GI Top Channel 100X50X6mm@9.56 KG/MTR. X (4.3 x2)
164.43
-
-
Supply & Installation of Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)/DP
7.93
-
-
Supply,Installation & Fabrication of Insulator Support Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 1 no's channel required =( 1x7.14x4.3)
61.4
-
-
Supply,Installation & Fabrication of Isolator Support Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 2 no's channel required =( 2x7.14x4.3)
122.81
-
-
Supply,Installation & Fabrication of Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 4 no's channel required =( 4x7.14x4.3)
245.62
-
-
Supply,Installation & Fabrication of 50x50x6mm.GI Bracing Angle, 4.5Kg./mtr., each angle length 4.927 mtr., 4 nos angle required = (4*4.5*4.927)
177.37
-
-
Supply,Installation & Fabrication of Isolator Operating Down Pipe Support Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr., 1 no's channel required =( 1x7.14x0.8)
11.42
-
-
Supply,Installation & Fabrication of Down Pipe Diagonal Support Angle, 4.5Kg./mtr., each angle length 0.388mtr., 1 nos angle required = (1*4.5*0.388)
3.49
-
-
Supply,Installation & Fabrication of Down Pipe Base Support Angle, 4.5Kg./mtr., each angle length 0.34mtr., 1 nos angle required = (1*4.5*0.340)
3.06
-
-
Supply,Installation & Fabrication of Isolator Support Side Channel 100X50X6mm, 9.56 KG/Mtr., each channel length 0.5 mtr., 2 no's channel required =( 2x9.56x0.5)
19.12
-
-
Supply of H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.511 Mtr. Length, 2 no's qty. required ( 1 Pair)
4
-
-
Supply of H.T. Stay set (Complete )
4
-
-
Supply of H.T. Stay Insulator Type-C (2 No's.)
8
-
-
Supply of 7/8 SWG Stay Wire 15kg /stay
60
-
-
Fixing of complete 33KV stay set including 0.5Cum cement concrete foundation 1:2:4 size (500mm x 500mm x 800mm)
4
-
-
Supply,Installation,Testing & Commissioning of Earthing Device & Associated Accessories (Heavy duty GI Perforated Pipe of ID=40mm & OD=50mm with 3000mm long ) complete (with supply of all required materials such as Salt, Charcoal, GI Nuts-Bolt-washer, construction materials for chamber & cover etc.) in all respect with earth chamber & cover as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC. (Each pit resistance will be measured and recorded and shall be as per IS)
4
-
-
Supply & Installation of 50x6mm GI Flat for earthing, 2.36kg/mtr., (15 Mtr. For L.A, 4 Mtr for Isolator Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 24x2.36
113.28
-
-
Supply & Installation of Danger Plate, 2 no's.
4
-
-
Supply & Installation of Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510)
1.2
-
-
Supply & Installation of GI barbed wire anticlimbing device (3 Kg. Per support)
12
-
-
Supply & Installation of Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's = (8x0.59x0.510)
4.81
-
-
Supply,Installation,Testing & Commissioning of Lightning Arrester(30KV,10KA) (Station Class,class-2)complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
6
-
-
.........do......... of 33 KV 630 AMP Double break (Turn & twist center rotating) isolator with earth switch with Pl(Polymer)
2
-
-
.........do......... of 33KV pin insulator polymer
6
-
-
.........do......... of H W fitting(B&S) 90KN,4 Bolt
12
-
-
.........do......... of 33KV Polymer Disc Insulator (90KN- 120KN) along with Hardware fitting.
12
-
-
.........do......... of PG Clamp for 232 sq.mm AAA conductor
12
-
-
.........do......... of GI Nut , Bolt & Washer of different sizes (22.15 Kg each DP with Isolator)
44.3
-
-
11kV Line DP-4Nos
-
-
-
Supply, Fabrication & Installation of WPB 160x152 (11Mtr. Long, 30.44KG/Mtr.) with excavation of pole pit in all kind soil, & providing & laying of 1:1.5:3 , M20, concrete of size - 500(B)x500(W)X1800(H) , and cooping of 500(B)x500(W)x450(H), Scope of work also includes refilling, water-ramming & 5 days curing and zebra painting (In Black & Yellow Strips/Zebra)complete in all respect as required & as per technical specification & GTP/ Drawing approval by TPSODL & direction of EIC.
8
-
-
Supply,Installation & Fabrication of Top Channel 100X50X6mm, 9.56 KG/Mtr., each channel length 3 mtr., 2 no's channel required =( 2x9.56x3)
229.44
-
-
Supply,Installation & Fabrication of Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)
15.86
-
-
Supply,Installation & Fabrication of Isolator switch Mounting Channel 75X40X4.8mm, 7.14KG/Mtr, each channel length 3 Mtr., 2 no's channel required =( 7.14x3x2)
171.36
-
-
Supply,Installation & Fabrication of Isolator Switch Side Support Channel 100X50X6mm,9.56 KG/Mtr., each channel length 0.35 mtr., 2 no's channel required =( 9.56x2x0.35)
26.77
-
-
Supply,Installation & Fabrication of Channel Support for down Pipe 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr., 1 no's channel required =( 7.14x0.8x1)
22.85
-
-
Supply,Installation & Fabrication of Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 1.66 Mtr., 4 no's channel required =( 7.14x3x4)
342.72
-
-
Supply,Installation & Fabrication of 50x50x6mm.GI Bracing Angle, 4.5Kg./mtr., each angle length 3.512 mtr., 4 nos angle required = (4.5x3.512x4)
252.86
-
-
H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair)
8
-
-
H.T. Stay set (Complete )
8
-
-
H.T. Stay Insulator Type-C
8
-
-
7/10 SWG Stay Wire 15kg /stay
120
-
-
Fixing of complete 11KV stay set including 0.5Cum cement concrete foundation 1:2:4 size (500mm x 500mm x 800mm)
8
-
-
Supply,Installation,Testing & Commissioning of Earthing Device & Associated Accessories (Heavy duty GI Perforated Pipe of ID=40mm & OD=50mm with 3000mm long ) complete (with supply of all required materials such as Salt, Charcoal, GI Nuts-Bolt-washer, construction materials for chamber & cover etc.) in all respect with earth chamber & cover as required & as per technical specification & GTP/drawing approval by TPSODL & direction of EIC. (Each pit resistance will be measured and recorded and shall be as per IS)
8
-
-
Supply & laying/Installation of 50x6mm GI Flat for earthing, 2.36kg/mtr., (12.5 Mtr. For L.A, 3 Mtr for AB Switch Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 20.5x2.36
193.52
-
-
Supply & Installation of Danger Plate, 2 no's.
8
-
-
Supply & Installation of Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510)
2.41
-
-
Supply & Installation of GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg)
24
-
-
Supply & Installation of Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's = (8x0.59x0.510)
9.63
-
-
Supply,Installation,Testing & Commissioning of Lightning Arrester(11KV,10KA) (Station Class,class-2)complete in all respect as required & as per technical specification & GTP approval by TPSODL & direction of EIC.
12
-
-
......do...... of 11KV 400 AMP isolator with earth switch with PI(polymer)
4
-
-
......do...... of 11 KV pin insulator polymer
12
-
-
......do...... of H W fitting (B&S) 70KN, 3Bolt
24
-
-
......do...... of Disc insulator (B&S) 70 KN polymer
24
-
-
......do...... of PG Clamp for 100 sq.mm AAA conductor
24
-
-
......do...... of GI Nut , Bolt & Washer of different sizes (13.718 Kg each DP with AB Switch)
54.87
-
-
Supply & Painting the Poles with Black paint (4Ltrs), Yellow paint (8 ltrs) in Black & Yellow strip complete as required & as per specification.
1
-
-
PART-B (Civil Works)
-
-
-
Civil Works complete in all respect as required & as per technical specification & GTP / Drawing approval by TPSODL & direction of EIC.
-
-
-
Contour survey , plotting the contour on graph sheet and marking the finished ground level
1224
-
-
Cutting for Levelling and disposal of excess earth either in low laying area in sub-station or outside.
143
-
-
Filling of S/S area with borrowed earth (rolling & compacting of filled up soil before taking measurement).
2320
-
-
OUT DOOR DRAIN to DISCHARGE SWITCHYARD/ WATER FROM WASH BASIN AND CONTROL ROOM ROOF (10 mts
-
-
-
Excavation in all type soil (1.35x10x0.7)
9.45
-
-
PCC (1:3:6 ) (1.35x10x0.1)
1.35
-
-
PCC ( 1:2:4 ) (0.3x10x0.05)
0.15
-
-
Brick Masonary with cement mortar ( 1:5 ) (0.25x10x0.925+1/2x0.15x0.93x10)+(0.25x10x0.925)
5.32
-
-
Plastering with Cement mortar(1:6) ( 2x0.25x10+2x0.925x10+1x0.925x10+1x1.0x10 )
42.75
-
-
Switch Yard and COMPOUND WALL as per Drawing Schedule and Specification. For PILE Foundation for SBC Upto 10
-
-
-
Construction of Compound-wall (with RCC column & beam with M-20 Grade concrete ) along the property line of the sub-station as per technical specification and instruction of the Engineer in Charge.(the size of the bricks shall be 250mm having 1st class Fly-ash brick having compressive strength with 75kg/cm2). This also includes excavation in all types of soil or rocks, backfilling ,and disposal of excess earth . (Brick works rested on RCC Beam and RCC Column & footings , including Cement Plastering, Cement wash, Wall Painting two coats with weather coat.
Provision of the boundary wall Fencing with M.S Grill of 700 mm height fixing at the top of the wall. It includes supply of all the materials & two coats of synthetic enamel paintings after primer application of the fencing .
140
-
-
Switch Yard GI Chain Linking Fencing with 2 Mtr Height.
60
-
-
Power Transformer Foundation / One (5 MVA)
-
-
-
Excavation in all type soil per Tfr.(3X3X1.1 mtr)
19.8
-
-
PCC (1:3:6 ) per Tfr.(3X3X0.075 mtr)
1.35
-
-
RCC ( 1:1.5:3 ) per Tfr. As per drawing
10.52
-
-
RRHG stone grouting with sand per Tfr.
9
-
-
Construction of 100kVA 33/0.4 kV station Trf. Plinth
-
-
-
Excavation in all type soil (2.5X2.5X0.750 mtr)
4.69
-
-
PCC (1:3:6 ) (2.5X2.5X0.075 mtr)
0.47
-
-
RCC ( 1:1.5:3 ) (1.5X1.5X0.1 mtr)
0.23
-
-
Brick Masonary work (2.5x2.5x.925+2x(.5 x1.5x2.25) (1:5)
61.19
-
-
Cement Plastering (1:6) (1.5x2.25x4)+(1.5x1.5) 20mm thick
15.75
-
-
Construction of oil sump pit for Transformer (1.6 X 1.6 X 2.3 )
-
-
-
Excavation of Earth(2.0x2.0x2.1)
8.4
-
-
PCC (1:3:6) 2X2X0.1
0.4
-
-
RCC(1:1.5:3) 1.6X1.6X0.1 for Top Slab
0.26
-
-
Brick Masonary work(2x2.1+2x1.6)x0.25x2.3 (1:5)
4.26
-
-
Cement Plastering (1:6) 2.3 ( 4x2.1+ 4x1.6 )+ 1.6x1.6
36.6
-
-
Drainage for Oil sump pit with 250 dia hume pipe
24
-
-
ROAD (6 Mtrs wide) Length of the road 20 mtrs as per Drawing Schedule- OPTCL/CIVIL/11-REV-B.
-
-
-
Excavation in all type soil 0.5mx1mx6m
60
-
-
Boulder Packing 0.5mx1mx5m
60
-
-
Water base course -I 0.075mx1mx5m
9
-
-
Water base course -II 0.075mx1mx5m
9
-
-
PCC ( 1:2:4 ) 0.1mx1mx5m
12
-
-
(125x70x5) mm RS GI joist 5Mtr ( STATION) as per Drawing Schedule- OPTCL/CIVIL/2-REV-B.
-
-
-
Excavation with back filling L 1m x W 1 x D 2
8
-
-
PCC (1:3:6)
0.4
-
-
RCC (1:1.5:3)
12
-
-
Baffle Wall
-
-
-
Excavation with back filling 4.2mx0.75mx0.5m
1.58
-
-
PCC 1:3:6 4.2mx0.75mx0.1m
0.32
-
-
RCC 1:1.5:3 0.75x3.8x0.2+0.5x3.4x0.2+2.5x3x0.15
5.8
-
-
PCC (1:4:8 ) With cement For S/S area(75 mm) per Sq. mts.( (8x16x0.075)
9.6
-
-
Metal Spreading 100 mm. per Sq. mts. Area of spreading.
12.8
-
-
Switchgear Cum Control Room (22x10Mts) (column & beam based) (as per specification & Inclusive of doors, windows, collapsible gate, PHD fittings, electrification, inner cable trench, Two nos main doors with concrete pillars, beams) etc. as per TPSODL approved Technical specification & Layout Drawing complete.
-
-
-
Switchgear Cum Control Room For Pile foundation in FLOOD AREA (with SBC upto 10)
-
-
-
Boring and casting 300 mm dia single under reamed pile of 5.00 m. long with R.C.C. M-20 using 20 mm down graded chips with cost of all materials, labours, T&P etc. & all other machinaries required for the work etc. Complete in all respect as per latest specification & direction of the Engineer in charge.
252
-
-
Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries , T & P & all other machinaries required for the work etc. Complete in all respect as per latest specification & direction of the Engineer in charge.
470.8
-
-
Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc. Complete in all respect as per latest specification & direction of the Engineer in charge.
791.6
-
-
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement , 40 mm. size black hard crusher broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machinaries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc. Complete in all respect as per latest specification & direction of the Engineer in charge.
156.8
-
-
K.B. Brick masonary in cement mortar (1:6) using the bricks of size 10" x 5" x 3" of crushing strength not less than 100 kg / centimeter square with dimensional tolerance 3% after immersing the bricks for 6 hours in water before use including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machinaries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.
-
-
-
In Foundation and Plinth
108
-
-
Ground Floor
222.8
-
-
RCC work M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg./ Sqcm.in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S.456 and I.S 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips, screened and washed sharp sand for mortar of approved quality from approved quarry, to be mixed in concrete mixture with approved quality cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes and cess of all materials, cost of all labours, sundries, T&P & all other machinaries required for the work but excluding cost and conveyance of M.S. or Tor steel and binding wires etc. Complete in all respect as per latest specification & direction of the Engineer in charge.
-
-
-
Pile cap & Grade beam
300
-
-
R.C.C. wall
70.8
-
-
Plinth Beam
24.4
-
-
Column & Beam- Ground Floor
144
-
-
Lintel-Ground Floor
8.8
-
-
65mm thick R.C.C.Chajja- Ground Floor
88.4
-
-
Roof slab - Ground Floor
147.2
-
-
Staircase- Ground Floor
23.6
-
-
Cutting, Straightening coiled or bent up M.S. rods or Tor steel welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost etc. complete in all respect as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
72
-
-
Supplying, fitting and fixing vitrified tile 60x60cm plain Ivory 8 to 10 mm thick in floors of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, takes labour T&P etc. required for the work etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.
416
-
-
Supplying, fitting and fixing vitrified tile 60x60cm plain Ivory 8 to 10 mm thick in dado of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, takes labour T&P etc. required for the work etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.
36.8
-
-
Supplying, fitting and fixing Floor tile of size 40cmx40 cm / 30cmx30cm in floors on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles of required thickness of approved quality including cost of all materials, takes labour T&P etc. required for the work.etc complete in all respect as per the latest specification and direction of the Engineer-in-charge.
20.4
-
-
Providing fitting fixing Glazed /Ceramic tiles of size 20cmX30cm & 6.5 to 6.7mm thick of size up to 0.10sqm in wall dados skirting and on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.
107.2
-
-
Supplying, fitting and fixing 5"x2½" size Dressed seasoned Sal wood chaukaths including cost, conveyance royality taxes of all materials. labour, all other machinaries, T & P articles required for the work complete in all respect as per the direction of the Engineer-in-Charge.
1
-
-
Supplying, fitting and fixing 30mm/32mm flush door shutter (Non-Sal hard wood frame fixed with 4mm BWR ply on both sides of frame.including cost conveyance royality taxes of all materials. labour, all other machinaries, T & P articles required for the work complete in all respect as per the direction of the Engineer-in-Charge.
57.6
-
-
Providing and fixing of sliding windows of approved make to be febricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick "D" quality, galvanized as per IS-277 with zinc of 120 Gm/ Sqm.) including cost conveyance royality taxes of all materials. labour, all other machinaries, T & P articles required for the work complete in all respect as per the direction of the Engineer-in-Charge. DOUBLE SHUTTER SLIDING WINDOW
124
-
-
Providing and fixing of FRP door frame including cost conveyance royality taxes of all materials. labour, all other machinaries, T & P articles required for the work complete in all respect as per the latest specification and direction of the Engineer-in-Charge.
40.8
-
-
Providing and fixing of FRP door shutter including cost conveyance royality taxes of all materials. labour, all other machinaries, T & P articles required for the work complete in all respect as per the latest specification and direction of the Engineer-in-Charge.
15.2
-
-
Providing 16mm. thick cement plaster with cement mortar of mix (1:6) with approved quality cement with screened and washed sharp sand for mortar and finished smooth to the surface over brick work after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cess, and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge
-
-
-
Ground Floor
2499.6
-
-
Providing 12mm. thick cement plaster with cement mortar of mix (1:6) with approved quality cement and screened and washed sharp sand for mortar and finished smooth to the surface over brick work after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes, cess, of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charger in charge
-
-
-
Ground Floor
1588.4
-
-
Providing 12mm. thick cement plaster with cement mortar of mix (1:3) with approved quality cement with screened and washed sharp sand for mortar and finished smooth to the surface in ceiling and R.C.C. surface after chipping the surface in all floors including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cess, and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
-
-
-
Ground Floor
1603.6
-
-
Providing and finishing the wall surface with two coat of cement wash including scaffolding, all labour, cost, conveyance, cess, taxes of all materials, T&P articles, brushes all other machineries required for the work complete in all respect confirming to relevant I.S. Specification and direction of the Engineer-in-Charge
-
-
-
Ground Floor
5655.2
-
-
Supplying fitting and fixing of M.S shutter made out of M.S Angle 40mmx40mmx6mmm, M.S.Flat 19 mm x 5 mm size, M.S. guide, top hood cover etc. as per design provided including cost, conveyance, royalities of all materials, cost of all labour, T&P articles required for the work etc. complete in all respect confirming to relevant I.S specification and direction of the Engineer-in Charge.
3166.8
-
-
Supplying fitting and fixing of M.S grill made out of M.S M.S.Flat 19 mm x 5 mm size, as per design provided including cost, conveyance, royalities of all materials, cost of all labour, T&P articles required for the work etc. complete in all respect confirming to relevant I.S specification and direction of the Engineer-in Charge.
2848.4
-
-
Wall painting 2 coats with acrylic distemper over one coat of wall primer of approved shade on new work to give an even shade in all floors at all height including scafolding cost of brushes including cost of paint cost conveyance royality of all materials labour,T&P articles required for the work etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
3725.2
-
-
Painting two coats with weather coat on exterior walls surface of approved quality and approved shade over a coat of primer in all floors at all height of approved quality and shade including cleaning and sand papering the surface and making the surface smooth with cost, conveyance, loading, unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work complete in all respect as directed by Engineer-in-charge
-
-
-
Ground Floor
1930
-
-
Painting two Coats with approved colour synthetic enamel paint on wood / iron work in all floors at all height including scafolding cost conveyance royality of all materials labour,T&P articles required for the work etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.
418.4
-
-
Providing cement concrete (1:1.5:3) using 12mm size black hard crusher broken granite stone chips, screened & washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machinaries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc. Complete in all respect as per latest specification & direction of the Engineer in charge.
123.6
-
-
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
68
-
-
Providing and fixing M.S. fan clamp type-I of 16mm dia M.S. bar bent to shape with hooked ends in R.C.C. slab during laying including painting the exposed portion of loop as per standard design complete as directed by the Engineer-in-charge.
120
-
-
Providing 12mm. thick cement plaster in cement mortar of mix (1:4) with neat cement punning with approved quality cement with screened and washed sharp sand for mortar and finished smooth to the surface in ceiling and R.C.C. surface after chipping the surface in septic tank including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cess, and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
48.4
-
-
Providing neat cement punning with approved quality cement finished smooth to the surface etc. complete with cost, conveyance, loading, unloading, royalties, cess, and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
958
-
-
40 mm thick grading concrete with cement concrete (1:2:4) using 12mm and down graded b.h.g. chips to the roof surface with water proofing cement compound finished smooth over RCC slab including hoisting and laying in position watering and curing for required number of days finished to smooth surface and desired slope including cost conveyance, royalty and taxes of all materials, labour T&P articles required for the work etc. complete in all respect confirming to relevant I.S specification and direction of the Engineer-in-Charge.
550.8
-
-
P.H. Fitting (Internal & External) to Switch-Gear -Cum -Control Room
-
-
-
Supplying all materials , labours , taxes and tools and plants for fitting and fixing of PVC pipes of following nominal bore conforming to ASTM-D-1785 (Schedule-80) including fittings and laying as per the site requirement etc., all complete including testing as per the direction and specification of Engineer-in-charge
-
-
-
15 mm dia
15
-
-
20 mm dia
20
-
-
25 mm dia
15
-
-
40 mm dia
20
-
-
50 mm dia
20
-
-
Supplying all material, labour , T&P & fitting ,fixing the following different water supply fittings of approved make with including supply of all necessary jointing materials etc. all complete as directed by the Engineer-in-charge.
-
-
-
25 mm dia Ball valve
2
-
-
50 mm dia Ball valve
2
-
-
25 mm dia F.W. valve
2
-
-
50 mm dia F.W. valve
2
-
-
Supplying all labour T&P and cutting holes in brick masonry wall for taking pipes through and mending good the damages with supply of all required materials etc. complete as per the direction of the Engineer-incharge
-
-
-
For 15mm to 50mm CPVC pipe to pass in 125mm to 250mm thick wall
10
-
-
Supplying all labour T&P and materials and making grooves in brick walls vertically and horizontally to the required depth and width for fixing pipes & fittings of sizes 15mm dia to 25mm dia in the grooves, testing the pipe line against leakage, and filling the grooves with cement mortar(1:4) to bring the surface to original level including cost of mortars, curing and conveyance of materials etc. complete as per direction of the Engineer-in-charge.
10
-
-
Supplying all materials , labour T&P and fittings of approved quality required for fixing of NP or CP Brass or GM fixtures of following sizes and specification with leak proof threaded joints tightened with spun yarn and white zinc or any tightened with spun yarn and white zinc or any including testing and rectification of detects, after testing complete as per direction of Engineer-in-charge.
-
-
-
Bibcock
5
-
-
Long Body Bibcock
2
-
-
Pillar cock
2
-
-
Angular stop cock
4
-
-
Soap Holder
2
-
-
Towel ring
2
-
-
Toilet paper holder
2
-
-
Glass self 22"
2
-
-
Towel rail 24"
2
-
-
Shower arm 190mm long light
2
-
-
CP Grating
2
-
-
Concealed stop cock
4
-
-
Connecting Pipe
2
-
-
Basin with pedestal
2
-
-
Providing and fixing vitreous China water closet (European with seat and lid), of Cerra Cascade “CASINO”, CP brass buffers, 10 liter cascade dual flushing cistern hinges & rubber with fittings and brackets, 40 mm flush bend of CP brass, 20 mm overflow pipe with specials & mosquito proof coupling complete, painting on brackets and making good the walls and floors wherever required.
1
-
-
Providing and fixing vitreous China water closet Indian type of Orissa pattern size (580mmx440mm) of approved quality with PVC Slimeline (Parryware make) 12.5 ltr capacity low level cistrn with hinges & rubber with fittings and brackets, 40 mm flush bend of CP brass, 20 mm overflow pipe with specials & mosquito proof coupling complete, painting on brackets and making good the walls and floors wherever required.
1
-
-
Providing and fixing vitreous China water urinal of Cerra/Parry ware with fittings and brackets, flush bend of CP brass, and making good the walls and floors wherever required.
2
-
-
Supply of all materials, labour, T&P , fitting and fixing in all floors fixed type bevelled plate glass mirror of size 600mm x 450mm x 5.5mm thick best Indian make ,supply of 13mm thick asbestos backing and CP Brass screw including cost conveyance, taxes of all materials complete as per specification and direction of Engineer-in-charge(Make-Modi Guard/Belgium)
2
-
-
Supply of all materials, joining materials ,labour and T&P and laying UPVC SWR PIPES of Standard make with ISI Mark duly approved by the Engineer-in-charge including jointing, earthwork in excavation of trenches in all kind of soil to the required depth and refilling of pipe line trenches in 0.3048 mtrs layers with 300 mm deep sand around cushion duly watered and rammed or fixing to walls, floors with supply of necessary clamps, nails and cutting the pipe to length with wastage including supply of all Clamps, Clips, Endcaps & jointing materials etc., complete as per standard specification and direction of Engineer-in-charge.
-
-
-
100mm dia ( ISI Marked )
10
-
-
150mm dia ( ISI Marked)
25
-
-
Supplying all materials, labour T&P for jointing of the UPVC SWR SEWER pipe fittings of standard make duly approved by the Engineer-in-charge with joining material etc. suitably required for fixing on 100mm dia soil waste pipe complete with requisite testing as directed by Engineer-in-charge.
-
-
-
100mm dia "P" Trap
2
-
-
100mm dia Bend Plain
3
-
-
100mm Door Bend
3
-
-
100 mm dia Single Junction with Door
3
-
-
100 mm dia double Junction with Door
3
-
-
100mm dia Terminal Guard
2
-
-
100mm dia. Floor trap
3
-
-
Supplying all materials, labor T&P for jointing of the UPVC SWR SEWER pipes & fittings of standard make duly approved by the Engineer-in-charge suitably required for fixing on 100mm dia soil waste pipe complete with requisite testing as directed by Engineer-in-charge.
-
-
-
100mm Pipe
10
-
-
Fixing of UPVC vent pipes Including labour & T&P all complete as directed by the Engineer-in-charge.
-
-
-
100mm Pipe
4
-
-
100mm Vent Cowl
2
-
-
Supplying all materials labour T&P and constructing inspection chamber C.C.(1:4:8) on bed with hard stone metal size 40mm and 250mm K.B.Bricks work having crushing strength 75 Kg to 99 Kg/cm2 in cement mortar (1:4), R.C.C. roof slab with 500mm dia light pattern factory made SFRC M.H cover with frame, moulding and shaping the channel and benching with C.C. 1:2:4 with hard granite chips 12mm size, 12mm thick C.P 1:3 including cement punning inside, Cement plaster (1:3) outside the chamber, earth work in excavation in all kinds of soil and refilling the cavity around the chamber as per detail drawing & design and specification including cost, conveyance, taxes etc. all complete as directed by Engineer-in-charge.
-
-
-
750mmx 750mm x450mm
1
-
-
Providing and fixing 2000 litres capacity P.V.C Over head (Sintex make) tank with all piping and valve arrangement with all labour & materials ,including cost, T&P , scaffolding etc., complete as directed by the Engineer-in-charge.
-
-
-
2000 Ltr Capacity
1
-
-
Supplying all material, labour, T&P and constructing manhole chamber of size as mentioned below with 250mm nominal size K.B. Brick having crushing strength 75kg to 99kg /cm2 in CM 1:4 over a bed of 150mm thick C.C(1:4:8) using 40mm size HG metal, plastering with 12mm thick cement mortar (1:3) on internal and external surface, inside finish with neat cement punning, providing & fixing step iron of appropriate quality & size with 3 coats anticorrosive paint, RCC (1:1.5:3) cover slab using 20m & down size graded HG chips along with factory made reinforced concrete cover with frame including breaking of pipe line where ever necessary and earth work in excavation in all kind of soil & rock and refilling the cavity by selective soil, leveling the surface around the chamber with disposal of surplus earth if any to a distance of 50mt as per specification, design & drawing including cost of curing and all taxes , royality , cost , conveyance etc. all complete as directed by the Engineer-in-charge.
1
-
-
Supplying all material, labour, T&P and constructing 1.80m dia x 2.60m deep soak way pit with dry brick walling upto 2.00m height and 1st class K.B. Brickwork in cement mortar (1:6) for the remaining 06.60m height at top, 12mm thick cement plaster (1:4) inside and outside , 100mm thick gravel backing in the rear of well staining, 125mm thick RCC cover slab fitted with with iron lifting handles including earth work in excavation in all kind of soil & rock and refilling the cavity by selective soil, leveling the surface around the pit with disposal of surplus earth if any to a distance of 50mt including cost of curing and all taxes , royality , cost , conveyance etc. all complete as directed by the Engineer-in-charge.
1
-
-
Watering system like 150 mm dia, 100 Mtr deep bore well (PVC pipe to be used) 1 HP submersivele pump, switch yard water hydrant system for pouring water into the earth pits, tap for garden, including PVC pipes & other accessories required etc.
1
-
-
Small wicket (GI) gate one in between Main Gate & Security shed & another in front of Customer Care room of size 1.5 mtr width X 2 mtrs height single leaf with locking arrangement etc. as per above.
2
-
-
RRHG retaing wall with 1:5 cement mortar Considering 0.6 mt height of retaining wall above the existing ground level per Meter as per Drawing TOTAL 74 Mtrs
-
-
-
Excavation in all type of soil( 0.8 Cum / Mtr)
105.6
-
-
PCC (1:4:8) 200 mm thick. With cement ( 0.2 Cum / Mtr)
26.4
-
-
PCC (1:2:4) 50 mm thick With cement ( 0.02 Cum / Mtr)
1.58
-
-
RRHG Cement Masonary (1:5) With cement ( 0.86 Cum / Mtr)
63.64
-
-
Design & providing Galvanised Chain Linking Fencing with 2 Mtr Height around TRF specification.
80
-
-
N.B: The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements