Odisha Industrial Infrastructure Development Corporation Tender

Site survey, Supply, erection, testing & commissioning of Galvanized Octagonal Decorative Poles with base plate fabricated from special steel plates as per BS EN 10025/IS 5986 with excellent ultimate tensile strength, yield stress ,elongation, corrosion resistance properties and suitable weld ability. Plates to be out and folded to form a octagonal cross section and welded longitudinally as per IS 9595/IS 10178. The pole shall withstand wind pressure of 180 Km/Hr as per IS:875 and of 9 meters length in single section, continuously tapered profile for stability and aesthetics with face to face dimension being 190mm at bottom and 85mm at top and 3.0mm wall thickness with foundation base plate made of Hot rolled M.S plate as per IS:2026 and 300mm x 300mmx16mm thick duly welded to the base of the pole with foundation Bolts of 800mm length and M24 category with Nuts for grouting in concrete as per drawing.500mm to 2000mm long (or suitable size as per design of the Company) Galvanized Single Cross arm made out of G.I. tubular pipes Class B of suitable size and welded fit the top of the above pole and MS Plate for rigidity between cap and pipe with provision of passing the electrical cable from the pole to the end of cross arm for connection of the street lighting LED luminaries with Excavation of pole pit of size 1200mm in all kind of soil including rock of all variety with filling of sand to a height of 100 mm and then laying base foundation of PCC (1:4:6) of size 1000mm x 1000mm x 200mm Height & RCC Grade-20 foundation of size 900MM X 600MM X 600MM Height from base foundation to TOP high with granite metal of nominal size 20mm to 25mm including side shuttering and grouting of foundation bolts as specified above including watering and ramming it as required & including provision for passage of cables and finishing the surface with 1:4 ratio cement plaster as per Drawing complete as per technical specification and direction of E.I.C. Depending on the site condition the bidder has to consider the slight modification, if any to meet the design criteria subject to above the minimum foundation size as mentioned for which no separate payment will be made.

Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/ rock filling with charcoal & salt, connections to earthing studs / bolt of the pole complete including supply of all materials.

Supplying, installation and commissioning of energy saving street light luminaries with 120W LED to be fixed on the ends of cross arms mounted on the GI octagonal poles complete with connection from terminal box at the pole base to the luminaries with the help of 1.5 Sq.mm 650/1100 Volt grade 3core flexible copper cable, PVC insulated and sheathed conforming to IS:694, complete with supply of all materials such as luminaries with control gear, lamp, connecting wires and all accessories and sundries complete as per technical specification and direction of E.I.C.