Odisha Industrial Infrastructure Development Corporation Tender

Supplying, providing laying in approved layer thickness to line grade cross section and constructing Granular Sub-Base as shown in the drawing using crushed stone aggregate conforming to(Grade-III) grading specified in (Table 400-I /400-I A) & in accordance with physical requirement in BS 812 Part III, Technical specification Part I/II of specification for road and bridge works MORT&H (4th revision) spreading the same with motor grader of adequate capacity with hydraulic controlled blades & compacting the same with vibratory roller of minimum 80 to 100KN static weight or of equivalent capacity, to achieve minimum required density including full compensation to all operations, all inclusive costs, contigencies, incidentals, involved for finished defect free item of work complete to specification & as directed by the Engineer in charge.(Grade-II)

Supplying, mixing, providing laying in approved layer thickness to line, level grade & slope and constructing as per approved working drawing and approved mix design of wet mix Macadam (WMM) confirming to Gr.II of materials mentioned in table (400-10 & 400-11) & Technical specification part I / II Cl. 406 and its related sub-clauses along with Cl. 112 of specification for road and bridge work MORT&H (4th revision), including mixing in approved mixing plant with arrangement for controlled addition of water and transporting the mix from the plant to site by trucks /tippers and unloading the same to the hopper of the self propelled sensor paver, paving the same compacting by vibrating roller of minimum 80 to 100 kn static weight or of equivalent capacity to achieve minimum required density complete including full compensation all operations, all inclusive costs, contigencies, incidentals involved for finished defect free item of work complete to specification as per direction of Engineer or his representative to satisfaction.

Supplying and providing & laying in approved layers and constructing Berms with moorum sprinkling water to OMC and compacting by roller so as to achieve minimum requried density complete including full compaction of all objecties and inlculsive cost, conveyances, incidental involved for the work to complete specificiton as per direciton of Engineer-in-Charge.

Supplying, providing, spraying & priming over prepared base hot bituminous emulsion of medium porosity (Mediumsetting-1) complying with IS 8887 to a granular surface (WMM) at the rate of 6 Kg. /10sqm with a self propelled bitumen pressure sprayer uniformly at the specified temperature complete as per Technical Specification (Part I/II) Cl.502 along with Cl. 112 of specification for road and bridge work MORT&H (4th revision) and as directed by Engineer or his representative including full compensation to all operations, all inclusive costs, contigency & incidentals involved for finished defect free item of work complete to spefication as directed by the Engineer in charge.

Supplying, providing, laying to approved layers Bituminous macadam as per approved Job mix formula with Bitumen of 60/70 grade over a dust free cleaned prepared Primed /Tacked surface blending different sizes and quantities with required quantities of Crushed stone aggregates mixing ingradients with designed quantity of Bitumen at the required temperature heating & mixing uniformly in the approved hot mix plant capable of producing a mix conforming to the approved job mix formula technical specification Part I / II of specification for road and bridge works MORT&H (4th revision), sections 500, 900, 100 and its related clauses & sub clauses and tables and transporting the hot mixed materials through tipper of adequate capacity to the work site and unloading the same into the hopper of censor paver spreading continuously to line, level grade and camber racking out the excess material to specified thickness layer with least segregation of the mixed aggregates, compacting the same as with vibratory roller / pneumatic roller / Tanden Roller of required capacity at rolling

Supplying, providing and applying tack coat @0.2kg/sqm of bituminous cut back conforming to IS 8887 for super imposition of approved bituminous mix with the help of a self propelled hot bitumen pressure sprayer to spread the hot bitumen uniformly over the cleaned prepared dust free surface at specified quantity as per technical specification (Part I/II) and under Cl.503, Cl- 112 of specification of road and bridge work MORT&H (4th revision) including full compensation to all operations, all inclusive costs, contigencies, incidentals involved for finished defect free item of work complete to specification as per direction by the Engineer in charge.

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects as per the direction of Engineer in charge.

Median:Providing and laying Cement Concrete(1:2:4) in foundation and floors using approved quality of cement ,12 mm size crusher broken H.G Stone Metal and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete in layers not exceeeding 15cm thick in each layer to the required level, ramming, watering & curing etc complete including cost, conveyance , loading,unloading,royalties and taxes of all materials, cost of all labour, required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect as directed by the Engineer-in-charge.

Providing strong, rigid, leveled, and plumbed centering and shuttering for C.C work in foundation ,sub structure , footing etc. using wooden or steel frames ,ply,steel plates,bracing with adjustable centering props and plates size wood or bullas and fixing to proper position and slopes including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.

Painting with Synthetic enamel paint of approved colour, shade and brand like ICI/ Asian/ Berger on old wood work in two or more coats as required to give an even shade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials with taxes and transportation, loading, unloading, scaffolding, all labour, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete.

Filling and levelling of earth with fertile soil obtained from borrow area required leads by mechanical mean.(L=20km)

Drain Work:Earth work in excavation of foundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site with all lead and lift, including shoring, shuttering & dewatering (if required) with cost of all labour, hire & running charges of the water pumps, T & P required for the work complete as directed by the Engineer- in- charge.

Supplying & Filling in foundation trenches and plinth, ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift, including cost, conveyance, loading, unloading, stacking, royalties and taxes of all materials, cost of all labour, T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge. (Measurement will be taken on finished compacted section only)

Providing and laying Plain Cement Concrete of proportion (1:3:6) in foundation and floors (i.e. below the base course of the flooring) using cement , 40 mm size crusher broken H.G Stone Metal and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete to the required level, ramming, watering & curing etc complete to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance , loading, unloading, royalties and all texes of all materials, cost of all labour, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect as directed by the Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 Grade in drain wall, slab etc. with 20mm down size black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth, scaffolding, watering and curing for the required period including cost of all materials with all taxes royalties,transportaion, loading and unloading, all labour, T&P including hire & running charges of concrete mixer and vibrator etc complete as per direction of the Engineer-in-charge but excluding the cost of materials and labour for reinforcement bars and centering and shuttering for the work.

Cutting, Straightening coiled or bent up HYSD / TMT Reinforcement Bars welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing Fan Hooks where necessary and hoisting, lowering and placing the same in proper position according to the approved designs and drawings in all floors at al height including cost, conveyance, loading, unloading , stacking & all taxes of HYSD/ TMT Reinforcement Bars and Binding Wires of 18 to 20 Gauge required for the work , cost of all labour, T&P and scaffolding complete in all respect as directed by the Engineer in charge (Payment will be made according to the actual / proper weight of the HYSD / TMT Reinforcement Bars & Binding Wires consumed in the particular work only) .

Hume Pipe Culvert (13Nos)(1200mm Dia NP3):Earth work in excavation of foundation trenches/ Drain/Berm in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge

Sand filling in Road work & foundation of structure as per approved Drawing & Technical Specifications and as per Section - 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).

Providing and laying Cement Concrete of proportion (1:3:6) in foundation and floors (i.e. below the base course of the flooring) using cement , 12 mm size crusher broken H.G Stone Metal and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete to the required level, ramming, watering & curing etc complete to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance , loading, unloading, royalties and taxes of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect as directed by the Engineer-in-charge.

Providing and laying Cement Concrete of proportion (1:2:4) in foundation and floors (i.e. below the base course of the flooring) using cement , 12 mm size crusher broken H.G Stone Metal and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete to the required level, ramming, watering & curing etc complete to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance , loading, unloading, royalties and taxes of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect as directed by the Engineer-in-charge.

Laying of R.C.C hume pipe NP3 in single row with making necessary colar joint in joint portion etc complete as per direction of Engineer in charge.