Odisha Industrial Infrastructure Development Corporation Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 6,75,619Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IDCO_103014_1Bid Award Id
ViewTender No
CIVIL/EST/65/2023-24Tender Authority
Odisha Industrial Infrastructure Development Corporation ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Upto 1.5 Mtr Depth
513
152361
297
... More
From 1.5 Mtr upto 3.0 Mtr Depth
283
90115
318.43
... More
Disposal of excess earth by mechanical means / manually including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work but excluding GST as directed by the Engineer- in- charge.
796
221924
278.8
... More
Antitermite treatment Supplying, Diluting & Spreading Chemical Emulsion like CHLORPYRIPHOS OR Other Chemical approved by the Central Insecticides Board as directed by the manufacturer and spraying the mixture uniformly by the sprayer as preconstructional anti- termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 litres (or as directed by the manufacturer) per sqm on vertical and 5.0 litres per sqm on horizontal surfaces, 50% of the emulsion to be filled in center to center etc. complete as per the holes made in trenches at 150m.m IS:6313/1981(Part-II) complete including cost, conveyance, loading, unloading of all materials, cost of all labour, T&P, sundries and scaffolding where required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge.
635
66357
104.5
... More
The treatment starts when the excavation is complete and before laying soling and pcc. The treatment is carried out in following stages.
-
-
-
... More
a) Treatment to soil below raft: Before laying the rubble soling and pcc the compacted and leveled soil shall be treated at 5 litre / sq.m.
-
-
-
... More
b)Treatment to soil along the retaining wall:The soil coming in contact with the retaining wall shall be treated at 5 litre per sq. m. The treatment shall follow the backfilling as backfilling is done in stages of 30 cms but not to exceed a depth of 1metre. Rodding may be carried out to facilitate the treatment.
-
-
-
... More
c)Treatment to soil along the external perimeter of the building:The soil around the external perimeter of the building up to a depth of 30 cm shall be treated at 2.25 litres per linear metre. Rodding may be carried out to facilitate this treatment.
-
-
-
... More
d) Treatment of soil surrounding pipes, wastes and conduits:When pipes, wastes and conduits enter the soil inside the area of the foundation, the soil surrounding the point of entry must be loosened around each such pipe, waste or conduit for a distance of 15 cm and upto a depth of 7.5cm and loosened soil shall be treated with chemical emulsion.
-
-
-
... More
e)Spraying equipment:A pressure pump shall be used to carry out spraying operations to facilitate proper distribution of chemical in the soil.
-
-
-
... More
Note: All the Anti-termite treatment shall be executed through a recognised agency approved by the Engineer-in-charge. A written guarantee on non-judicial stamp paper shall be submitted by the Contractor for a minimum period of 10( Ten ) years from the certified date of completion for the satisfactory performance of the entire Anti-termite treatment system. The Defect Liability Period of the Anti-termite treatment is Ten years.The contractor has to furnish bank guarantee amounting to Rs.33,178/- which will be released after 10(Ten) years from the date of completion of the whole work. In case,the contactor fails to furnish the B.G.,equal amont i.e.Rs.33,179/ will be kept withheld from the Security Deposit till the end of the Defect Liability Period.
-
-
-
... More
Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge. (Measurement will be taken on finished compacted section only.)
1513
1304206
862
... More
Providing and laying Plain Cement Concrete of proportion (1:3:6) in foundation & Floors using approved quality of cement ,40 mm size crusher broken H.G Stone Metal and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete in layers not exceeeding 15cm thick in each layer to the required level, ramming, watering & curing etc complete including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect excluding GST as directed by the Engineer-in-charge.
122
719690
5899.1
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 25 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
169
1198362
7090.9
... More
R.C.C. Grade beams
22
167380
7608.2
... More
R.C.C. Beams, columns, grider and bressmer etc.
-
-
-
... More
Ground Floor
54
855284
15838.6
... More
First Floor
40
689412
17235.3
... More
Second Floor
40
756232
18905.8
... More
Terrace
9
188130
20903.4
... More
R.C.C. Floor and Roof slab, landing, balconies up to 4.3Mtr. Height.
-
-
-
... More
Ground Floor
82
1138570
13885
... More
First Floor
98
1445411
14749.1
... More
Second Floor
103
1625340
15780
... More
Terrace
6
102069
17011.6
... More
R.C.C. stairs excluding landing but including railing
-
-
-
... More
Ground Floor
85
1335877
15716.2
... More
First Floor
3
51126
17042.2
... More
Second Floor
3
55884
18628.1
... More
R.C.C. Lintels.
-
-
-
... More
Ground Floor
2
28646
14323.4
... More
First Floor
3
44965
14988.5
... More
Second Floor
2
31566
15783.4
... More
Terrace
0.15
2509
16727.8
... More
R.C.C. Chajjas & sunshade
-
-
-
... More
Ground Floor
61.54
76411
1241.65
... More
First Floor
76.92
102403
1331.3
... More
Second Floor
76.92
110657
1438.6
... More
Terrace
4
6268
1567
... More
R.C.C. Walls
-
-
-
... More
Ground Floor
13
179173
13782.6
... More
First Floor
6.4
95144
14866.3
... More
Second Floor
6.4
103426
16160.4
... More
Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)
-
-
-
... More
Ground Floor
387
3350375
8657.3
... More
First Floor
180
1564182
8689.9
... More
Second Floor
183
1596528
8724.2
... More
Terrace
15
131401
8760.1
... More
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties of all materials ,cost of all labour,scaffolding, sundries and T&P required for the works complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
Foundation & Plinth
59
307850
5217.8
... More
Superstructure
-
-
-
... More
Ground Floor
114
598625
5251.1
... More
First Floor
131
736272
5620.4
... More
Second Floor
114
689130
6045
... More
Terrace
42
274402
6533.4
... More
Fly Ash Brick Masonry for 125 m.m width brick masonry wall in cement mortar of mix (1:4) using Fly Ash bricks of size 23 c.m. x 11 c.m. x 8 c.m.having crushing strength not less than 75 kg per square c.m with provision of 2 ( Two nos ) of 6 m.m dia M.S. Round Reinforcement Bars at each 4th layers with cement and screened & washed sharp river sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works in superstructure and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, stacking, royalties of all materials ,cost of all labour, sundries, T&P required for the works etc. complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
17
106129
6242.9
... More
First Floor
24
158690
6612.1
... More
Second Floor
25
175920
7036.8
... More
12 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using screened & washed sharp river sand for mortar with approved quality of cement, finished smooth to the even surface of the brick masonry walls after racking out the joints properly ,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of corners etc. required for the work complete etc. excluding GST as directed by the Engineer- in -charge.
-
-
-
... More
Ground Floor
863
161726
187.4
... More
First Floor
1055
202454
191.9
... More
Second Floor
954
187556
196.6
... More
Terrace
244
49141
201.4
... More
16 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using screened & washed sharp river sand for mortar with approved quality of cement, finished smooth to the rough surface of the brick masonry walls after racking out the joints properly ,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of corners etc. required for the work complete etc. excluding GST as directed by the Engineer- in -charge.(in side wall)
-
-
-
... More
Ground Floor
1054
284474
269.9
... More
First Floor
970
272861
281.3
... More
Second Floor
988
289780
293.3
... More
Terrace
235
71863
305.8
... More
6 m.m thick cement plaster in cement mortar of mix (1:4) in all floors at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking of all Materials, cost of all Labour,Sundries, T&P, Scaffolding,Watering, Curing etc. complete in all respect excluding GST as directed by the Engineer- in- charge
-
-
-
... More
Ground Floor
503
104825
208.4
... More
First Floor
606
129502
213.7
... More
Second Floor
637
139694
219.3
... More
Terrace
40
8996
224.9
... More
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, ,es of all materials, cost of all labour, T&P etc. complete exlcuding GST as required for the finished item of work as directed by the Engineer-in-charge. on terrace.
-
-
-
... More
Terrace
635
330454
520.4
... More
Waterproofing to the roof slab
(a) Surface preparation : Cleaning the surface thoroughly by chipping the roof slabs using breakers, wire brush, mechanical grinder for making it free from all loose particles, dust etc. then total cleaning through air blower followed by water jetting and allowing the surface to dry.
(b) Application :
Supply and application of Nano Technology OrganoSilane based Zycosil + @ 1:20 (one part Zycosil + and 20 parts of clean water) to the saturation level on the entire flat surface and upto 300mm (1ft.) to the parapet walls and then allowing for drying 24 hrs., test the surface for hydrophobicity. Then application of 100% acrylic co-polymer Zycoprime+, cement and fine sand (100 mesh) mixed at a consistency of paste form and filling drainage pipes gaps. Then application of one coat of Zycoat mix of Zycoprime + and grey cement @ 1:1.5 ratio ( 1 part Zycoprime + and 1.5 part cement). 2ndcpat of Zycoat mix to be applied after the drying of first coat in the same procedure followed by sprinkling of sieved sand on the top of the slurry. Then allow it to dry followed by proper curing with water for at least two days.
635
285750
450
... More
(c) Coving :
Coving has to be done with Zycomix (a mortar prepared with Zycoprime+, cement and sand in the ratio of 1:5:15 and water as per workability to obtain a uniform paste). Finally cure with water to the entire treated roof and parapet wall for three days.
-
-
-
... More
Water proofing to the sunken slab (a) Surface preparation : Cleaning the surface thoroughly by wire brush, mechanical grinder for making it free from all loose particles, dust etc. then total cleaning through air blower followed by water jetting and then allowing the surface to dry. (b) Application before PCC :
Supply and application of Nano Technology OrganoSilane based Drycoat@ 1:20 (one part Drycoat and 20 parts of clean water) to the saturation level on the entire flat surface and upto to the height of the sunken slab casted and then allowing for drying 24 hrs., test the surface for hydrophobicity.
(c) Coving :
Coving has to be carried on with Zycomix (a mortar prepared with Zycoprime+, cement and sand in the ratio of 1:5:15 and water as per workability to obtain a uniform paste). This should be followed by application of Zycoat on the corner surface of the sunken slabs. The above Zycomix must be applied in the gaps of pipe joints in the sunken slabs followed by application of Zycoat.
(Note : The above application “ b & c” should be done before PCC)
86.2
38790
450
... More
(d) Application after PCC:
Supply and application of Nano Technology OrganoSilane based Drycoat@ 1:20 (one part Drycoat and 20 parts of clean water) to the saturation level on the entire flat PCC surface and upto to 1 mtr height of the wall. This should be done on a sound PCC surface with sufficient curing and drying. Then application of one coat of Zycoat (1 part Zycoprime+ mixed with 1.5 part cement) on Drycoat treated surface followed by one coat of Elastocoat (mixing of 100% acrylic co-polymer high strength elongation of 200 - 250% Elastobar 1 part and grey cement 1 part) with the help of brush. Then allow it to dry followed by proper curing with water for at least 3 days.
-
-
-
... More
Providing & filling sunken area toilet using broken of A.A.C block of different sizes having compressive strength not less than 4N/mm2 conforming to IS:2185 (Part-3)-2005 and IS:6441-1972 hoisting, lowering, laying and compacting, watering , including cost conveyance, royalities of all material, cost of all labour for loading and unloading, T & P etc sundries required for the work etc complete excluding GST as directed by the Engineer-in-Charge
17.24
56124
3255.5
... More
Providing vitrified tile flooring using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 600mmx600mm (coloured/printed) Homogeneous of approved quality, colour in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification excluding GST and direction of Engineer-in-charge. (Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
... More
Size of Tile
-
-
-
... More
600 x 600 mm
-
-
-
... More
Ground Floor
100.2
118797
1185.6
... More
First Floor
363
435164
1198.8
... More
Second Floor
319
386819
1212.6
... More
Providing vitrified tile in dado/ skirting using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 600mmx600mm, (coloured/printed) Homogeneous in dado/ skirting,riser of steps,wall on on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shadesof the vitrified tile if required watering and curing for 21 days,including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification excluding GST and direction of Engineer-in-charge. (Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
... More
Size of Tile
-
-
-
... More
600 x 600 mm
-
-
-
... More
Ground Floor
80
105784
1322.3
... More
First Floor
141
189236
1342.1
... More
Second Floor
96
130838
1362.9
... More
Providing Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect excluding GST as per specification and direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
163
460295
2823.9
... More
First Floor
149
422727
2837.1
... More
Second Floor
187
533118
2850.9
... More
Providing Granite stone prepolished 10mm thick in dado of approved quality, colour and size in dado, riser of steps and dado of landings in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete excluding GST in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
36
74098
2058.3
... More
First Floor
52
108061
2078.1
... More
Second Floor
58
121736
2098.9
... More
Providing edge moulding to 20 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect excluding GST as directed by the Engineer-in-charge. (Riser of the staircase)
-
-
-
... More
Ground Floor
143
40397
282.5
... More
First Floor
223
62997
282.5
... More
Second Floor
223
62997
282.5
... More
Providing Chequered Tile Flooring using Chequered Tile (25mm thick) of approved quality, colour and size in floors at all height on 25 m.m thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened & washed sharp river sand for mortar ,grouted with neat cement slurry joining the Ultra Designer Tile with neat cement slurry mixed with required quantities of pigments of approved marks to match the shades of the Ultra Designer Tile if required (Tiles are to be immersed in the water for required time before use) including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T&P required for the work , Watering, Curing for required days, including rubbing and wax polishing etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
213
143434
673.4
... More
Providing and fixing 12mm thick clear Toughened glass(glass make saint gobind/equivalent) with alluminium frame(Tata ,jindal/equivalent) door with Stainless steel Godrej 7477, Floor spring combo with lock (60 Kg) consisting of D 60 floor Spring, Top Patch, Bottom Patch, Bottom Lock Patch and Pivot Plate. Patches suitable for 8 to 12 mm thick glass. Floor spring Suitable for Max Door width as per site.Max Door weight 100 Kg, Max opening angle 116 deg, Mechanical Hold open angle 90 deg. Std spindle and SS304 Cover in satin steel finish. And Godrej 2809, SS304 Pull handle - H-Type (25 dia. X 300 mm)SS tower bolt 300X10mm dia. 332mm centre to centre hole distance. Bevelled washer for holding the handle. , including the cost of all materials, hardware fittings, including the cost of all materials, labour for work, , royalities, loading and unloading, conveyance, sundries and t&P et excluding GSTcomplete in all floors as directed by the Engineer-in-charge..
-
-
-
... More
Ground Floor
3.78
36605
9684
... More
Providing and fixing ISI marked both side laminated flush door shutters with hard wood frame confirming to IS 2202 (Part1) of 35 mm thickness including ISI marked necessary hardware fitting with approved colour paint over a coat of primer etc and hardware fittings such as, SS Concealed Hinges (5"), stopper, top pivot, top patch, bottom patch, Door magnet, SS Tower bolt-8", Mortise lock Handle, Cylinder coin & knob key & knob, SS lock body and Floor Spring etc. including cost of all labours, materials, conveyance, hardware fixing,loading and unloading and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
19.8
254735
12865.41
... More
First Floor
42.5
546779
12865.41
... More
Second Floor
23.6
303623
12865.41
... More
Providing and fixing factory made ENCRAFT or Equivalent uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finishedwall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holesfor fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
... More
Ground Floor
14
124997
8928.4
... More
First Floor
17
151782
8928.4
... More
Second Floor
14
124997
8928.4
... More
Providing and fixing of 46mm thick fully flush double skin Hollow metal 2Hrs fire rated doors with vision panel as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware.The infill material shall be resin bonded honeycomb core. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel.Test certificates should be available for vision lites / panels as part of the fire door assembly. Independent glass test certificates will not be accepted.Proper label confirming the type of door and the hourly rating is mandatory.Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet.Vision panel wherever applicable should be provided as per manufacturers recommendation with a beeding and screws from inside.The glass should be 6mm clear borosilicate fire rated glass of relavant rating of the door.All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt spray test. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule.
-
-
-
... More
Ground Floor
4
52487
13121.9
... More
First Floor
4
52487
13121.9
... More
Second Floor
4
52487
13121.9
... More
Terrace
4
52487
13121.9
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall , 6mm thick clear glass and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension .
-
-
-
... More
Ground Floor
12.96
96053
7411.5
... More
First Floor
12.96
96053
7411.5
... More
Second Floor
12.96
96053
7411.5
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall , 6mm thick clear glass and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
-
-
-
... More
Ground Floor
17.01
138139
8121.1
... More
First Floor
31.59
256545
8121.1
... More
Second Floor
31.6
256626
8121.1
... More
Supplying and fixing upvc ventilator with partially fixed glass,partially top hung & provision for exhaust having a frame size of 60 w x 45 ht and wall thickness of 2mm.The upvc frame is reinforced throughout with galvanised steel of 1.2mm thickness. The sash has a size of 60 w x 78 h and wall thickness 1.2 mm reinforced with galvanised steel throughout. The glazing provided is of thickness 5mm frosted glass both in fixed glass and in sash panel.The model and brand of the upvc ventilator shall be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,labour,T&P etc. complete.
-
-
-
... More
Ground Floor
0.4
2846
7115
... More
First Floor
1.1
7826
7115
... More
Second Floor
2.16
15368
7115
... More
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect excluding GST as directed by the Engineer-in-charge. ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
-
-
-
... More
Ground Floor
161.97
17653
108.99
... More
First Floor
891
97110
108.99
... More
Second Floor
891
97110
108.99
... More
Supplying , fitting and Fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P, etc. required for the complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
16.1
4651
288.9
... More
First Floor
8.1
2340
288.9
... More
Second Floor
8.1
2340
288.9
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
Note :-The weight of aluminium extruded section shall be taken for purpose of payment.
-
-
-
... More
Ground Floor
34
10676
314
... More
First Floor
34
10676
314
... More
Second Floor
34
10676
314
... More
Terrace
34
10676
314
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
-
-
-
... More
Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
... More
Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building
structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
-
-
-
... More
Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass
-
-
-
... More
Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight
-
-
-
... More
Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked
by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
-
-
-
... More
The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Ground Floor
5
12675
2535
... More
First Floor
7
17745
2535
... More
Second Floor
7
17745
2535
... More
Terrace
5
12675
2535
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in- Charge.
-
-
-
... More
Ground Floor
2
5437
2718.8
... More
First Floor
2
5437
2718.8
... More
Second Floor
2
5437
2718.8
... More
Terrace
2
5437
2718.8
... More
Providing and fixing of GFRC screens in approved design, size & thickness is 35mm +/- 5% as per drawing or giver pattern anufactured containg alkaline resistant glass fiber of make-Equivalent, NES, Japanor CEMFIL, Spain etc. including cost of all material as per the quirement to be fixed for direct application on the wall ,there will not be a over lapping make in position with necessary accessories with scafolding complete in all respect excluding GST as directed by the Engineer-incharge.
100
421620
4216.2
... More
Providing and painting two coats with synthetic enamel paint over of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
23
4261
185.3
... More
First Floor
43
8251
191.9
... More
Second Floor
31
6162
198.8
... More
Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer after finishing wall surface of walls with Acrylic wall putty (water based) of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
1744
316745
181.62
... More
First Floor
2160
405216
187.6
... More
Second Floor
2036
394373
193.7
... More
Terrace
284
56800
200
... More
Providing and applying two coats of Weather Coat Paint of approved make, quality and shade to the external surface of the building over a coat of primer after finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
676.2
114615
169.5
... More
First Floor
471
82990
176.2
... More
Second Floor
543
99477
183.2
... More
Terrace
235
44791
190.6
... More
Providing Plinth Protection of 1 m Width with side drain of 300 mm all around the plinth area of the proposed building with an under layer of 75m.m thick Plain Cement Concrete of proportion (1:4:8) using 40mm size hard crusher broken black granite stone metal compacted over a consolidated rigid ground and top of 50 m.m thick Cement Concrete of proportion (1:2:4) with 12mm size hard crusher broken black granite stone chips laid to proper slope and gradient and top to be finished smooth with 12mm thick cement plaster in C.M(1:4) and protected the edges with Fly ash brick massonary walls ( using the Fly ash Bricks of crushing strength not less than 75Kg/Sqcm) (half brick masonry 125mm deep) in Cement Mortar (1:6) including excavation of required earth , cost , conveyance, loading, unloading, stacking,royalities & taxes of all Materials, cost all Labour,Sundries, T&P, watering, curing etc complete in all respect excluding GST as directed by the Engineer-in-charge. (Payment will be made on the finished item of composite works only,no separate payment will be made for any indivisual part portion of item of work).
-
-
-
... More
Ground Floor
41
30991
755.9
... More
Supplying, fitting & fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16 mm of approved design and quality complete with frame and all fitting and fixtures including the cost of all materials, labour, conveyance, taxes, T&P etc. all complete as per the direction of Engineer -in-charge.
-
-
-
... More
Ground Floor
115
184460
1604
... More
First Floor
490
785960
1604
... More
Second Floor
496
795584
1604
... More
SITE GRADING WORKS
-
-
-
... More
Earth work in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for the work complete in all respect excluding GST as directed by the Engineer- in- charge.
-
-
-
... More
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds earth work ( 1st extra lift of 1.5mt (upto 7.5m)
169.6
50371
297
... More
Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift omplete excluding GST as per direction of Engineer-in-charge.
1934
348120
180
... More
Disposal of excess earth by mechanical means / manually including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work but excluding GST as directed by the Engineer- in- charge.
170
47396
278.8
... More
INTERNAL ROAD & PATHWAYS
-
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including cost of all labours, T & P, sundries etc. as required for the work complete as per the direction of the Engineer-in-charge.
930
7626
8.2
... More
Loosening 150mm thick, and levelling Compacting original ground supporting Embankment/subgrade/GSB to facilitate construction of Embankment / subgrade/GSB, sprinkling water to OMC condition and compacting by rolling so as to achieve minimum required density, etc complete as per Cl. 305.3.4 of technical specification for road and bridge works MORT&H (5th revision) complete including costs of all labour, T&P, hire and running charges of machinaries, all contingencies, incidentals involved for the finished operations defect free item of work to specification complete as per direction of Engineer -in-charge.
213.9
7700
36
... More
Construction of granular sub-base by providing Close graded Granular subbase using Grading-IV material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision) including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of all machineries, etc. all complete as per the direction of the Engineer -in -charge
93
166133
1786.38
... More
Construction of Wet Mix Macadam (WMM) in layers to required thickness, line, level, grade & slope as per approved working drawing and approved mix design, mixing in approved mixing plant with arrangement for controlled addition of water and transporting the mix from the plant to site by trucks /tippers and unloading the same to the hopper of the self propelled sensor paver, paving the same compacting by vibrating roller to achieve required density, including cost conveyance loading unloading royalty of crushed stone aggregates of required grading and cost of all other materials required as per Table no 400.13 etc complete as per Cl. 406 of technical specification for road and bridge works MORT&H (5th revision), including cost of all labour, T&P hire and running charges of machinaries for finished defect free item of work complete to specification and as per direction of Engineer-in-charge.
93
224481
2413.78
... More
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
-
-
-
... More
90 Cm Equilateral triangle
10
50934
5093.4
... More
80 x 60 Cm rectangular
10
61503
6150.32
... More
Providing and laying factory made cement concrete interlocking paver block of Specified grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern , filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge
-
-
-
... More
M-40 (80 mm Thick)
930
565812
608.4
... More
M-30 (60 mm Thick)
93
45131
485.28
... More
Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge. (Measurement will be taken on finished compacted section only.)
51.2
44134
862
... More
Supplying & fixing at site factory made/ precast cement concrete kerb stone of M-30 grade of size 600 x300 x150 including cost of all labours, materials, conveyance, loading and unloading, and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge & MoRTH Clause 408. The rate includes excavation of trenches, laying of foundation concrete & sand & mortar bed etc. as per approved drawings. The work will be executed as per the final approved Cross Section by the EIC.
1033
257785
249.55
... More
INTERNAL DRAIN
-
-
-
... More
Earth work in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for the work complete in all respect excluding GST as directed by the Engineer- in- charge.
-
-
-
... More
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds earth work ( 1st extra lift of 1.5mt (upto 7.5m)
118.4
35164
297
... More
Disposal of excess earth by mechanical means / manually including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work but excluding GST as directed by the Engineer- in- charge.
39.5
11012
278.8
... More
Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge. (Measurement will be taken on finished compacted section only.)
88.1
75942
862
... More
Providing and laying Plain Cement Concrete of proportion (1:3:6) in foundation & Floors using approved quality of cement ,40 mm size crusher broken H.G Stone Metal and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete in layers not exceeeding 15cm thick in each layer to the required level, ramming, watering & curing etc complete including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect excluding GST as directed by the Engineer-in-charge.
9.5
56041
5899.1
... More
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties of all materials ,cost of all labour,scaffolding, sundries and T&P required for the works complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
Foundation & Plinth
8.1
42264
5217.8
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 25 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
10.5
74454
7090.9
... More
R.C.C. Walls
26.2
361104
13782.6
... More
R.C.C. Slab
12.25
91900
7502.1
... More
Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)
44.1
381786
8657.3
... More
Providing & laying cement concrete M-15 grade using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers as per in each layer to the required level, ramming, watering & curing etc complete including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect excluding GST as directed by the Engineer-in-charge.
0.6
4469
7448.36
... More
Providing 12mm thick cement plaster in cement mortar (1:4) with neat cement punning to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading,royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
255.8
51339
200.7
... More
Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with Spigot Joint with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) in trenches including excavation of trenches,bedding with cement concrete 1:5:10 & making haunches all around the pipe with cement concrete 1:2:4, refilling the trenches after laying the pipe with excavated earth/sand & testing of joints etc.all complete as per the direction of Engineer-in-Charge.
-
-
-
... More
300 mm dia R.C.C pipe
20
17327
866.39
... More
BOUNDARY WALL
-
-
-
... More
Earth work in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for the work complete in all respect excluding GST as directed by the Engineer- in- charge.
-
-
-
... More
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds earth work ( 1st extra lift of 1.5mt (upto 7.5m)
99.9
29670
297
... More
Disposal of excess earth by mechanical means / manually including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work but excluding GST as directed by the Engineer- in- charge.
33.3
9284
278.8
... More
Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge. (Measurement will be taken on finished compacted section only.)
77.36
66684
862
... More
Providing and laying Plain Cement Concrete of proportion (1:3:6) in foundation & Floors using approved quality of cement ,40 mm size crusher broken H.G Stone Metal and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete in layers not exceeeding 15cm thick in each layer to the required level, ramming, watering & curing etc complete including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect excluding GST as directed by the Engineer-in-charge.
10.76
63474
5899.1
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) of approved designs and drawings having a minimum compressive strength ( in work test) 25 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
9.18
65094
7090.9
... More
R.C.C. Grade beams
14.98
113970
7608.2
... More
R.C.C. Beams, columns, grider and bressmer etc.
17.84
282560
15838.6
... More
Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)
56
484808
8657.3
... More
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties of all materials ,cost of all labour,scaffolding, sundries and T&P required for the works complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
Foundation & Plinth
14.5
75658
5217.8
... More
Superstructure
56.97
299155
5251.1
... More
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect excluding GST as directed by the Engineer-in-charge. ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
4135.78
450758
108.99
... More
Providing and painting two coats with synthetic enamel paint over of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect excluding GST as directed by the Engineer-in-charge.
153.76
28491
185.3
... More
12 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using screened & washed sharp river sand for mortar with approved quality of cement, finished smooth to the even surface of the brick masonry walls after racking out the joints properly ,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of corners etc. required for the work complete etc. excluding GST as directed by the Engineer- in -charge.
342.92
64263
187.4
... More
16 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using screened & washed sharp river sand for mortar with approved quality of cement, finished smooth to the rough surface of the brick masonry walls after racking out the joints properly ,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of corners etc. required for the work complete etc. excluding GST as directed by the Engineer- in -charge.(in side wall)
247.72
66859
269.9
... More
Providing and applying two coats of Weather Coat Paint of approved make, quality and shade to the external surface of the building over a coat of primer after finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
590.64
100113
169.5
... More
CEILING, PANELLING & PARTITION WORKS
-
-
-
... More
FALSE CEILING
-
-
-
... More
PLAIN GYPSUM CEILING :- Providing fitting and fixing of false ceiling with aluminium anodised T section No - 3215 with 2'-0" center to center , l section No -1705 upto 15 micron on 4 walls to be fixed by means of steel screw and pvc plug and alluminium grid 2'-0"x2'-0" with 12. 5 mm th gypsum board suspended from ceiling etc complete . The rate shall be exclusive of trap door which shall be paid for separately. including all cost of materials , labour, overheads T & P etc., excluding GST as directed by the Engineer- in -charge.
262.34
357726
1363.6
... More
PAINTING ON PLAIN CEILING :- Providing and applying two coats of Plastic Emulsion Paint of approved quality and shade over a coat of & primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, including of all materials, labour, conveyance, royalties, scaffolding, watering, curing, sundries, tools and plants etc excluding GST as directed by the Engineer- in -charge. (colour & shade to be approved before procurment & use)
262.34
47646
181.62
... More
Supply & Installation of Dune Beveled Tegular Mineral Fiber Ceiling /equivalent using Dune Beveled Tegular Mineral Fiber Ceiling Tiles of size 600x600x16mm, NRC-0.50 with Silhouette Grid 15x38mm wall angle 19x19mm and Armstrong Suspension system. Etc etc. including cost of all labours, materials, conveyance, fixing & fitting ,loading and unloading, scaffoldings, sundries and T&P etc excluding GST as directed by the Engineer- in -charge. ( OFFICE) (Armstrong /Equivalent )
315.41
526419
1669
... More
GRID CEILING FOR PANTRY & TOILET :- Supply & Installation of Ultima Beveled Tegular Mineral Fiber Ceiling /equivalent using Ultima Beveled Tegular Mineral Fiber Ceiling Tiles of size 600x600x19mm, NRC-0.70 with Silhouette Grid 15x38 mm wall angle 19x19mm and Armstrong Suspension system. Etc etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc excluding GST as directed by the Engineer- in -charge.. (Armstrong /Equivalent )
42.5
92947
2187
... More
Woodworks Grille (Ceilings & Wall)
-
-
-
... More
Supply & Installation of Woodworks Grille (Ceilings & Wall) (Natural /Carbonized Shade)- /equivalent 300*2400*16mm with Accessories etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc excluding GST as directed by the Engineer- in -charge.(Armstrong /Equivalent )
45
803565
17857
... More
LAMINATED WOODEN RAFTER FALSE CEILING:- Providing and fixing of wooden rafter false ceilling of size maxmimum upto 50 x125 mm made out of with 19 mm bwp PLY frame work and then fixing 6 mm th bwp ply to it over which is finished with 1 mm th SUEDE / TEXTURE laminate & fixed by means of stainless steel sturds including all the cost of material & labour, t&p etc excluding GST as directed by the Engineer- in -charge.
200
230400
1152
... More
Providing and Fixing Woodworks Linear of nominal width 100mm, having 80mm wide panel with 20mm reveal having a thickness of 15mm thickness and length 2400 mm. The panel shall be made of a Moisture resistant fibre board substrate having a minimum density of 595 Kg/m3 with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) and a melamine balancing layer on the reverse side. The panel shall have 0.7mm PVC edge banding along the length side with a similar finish as that of the face. The back of the panel shall have a black acoustic felt to cover the reveal of 20mm to attain an NRC of 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423.
-
-
-
... More
The panels shall provide a Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm. The back of the panels shall be profile-grooved to receive 3600mm special linear carrier (PeakForm Prelude XL Main Beam) with integrated factory fitted clips for installation etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc excluding GST as directed by the Engineer- in -charge. ( Armstrong / EQUIVALENT)
12
137136
11428
... More
PANELLING
-
-
-
... More
WOODEN PANELING WITH LAMINATE :- Providing and fixing wooden panelling suitably fixed to the walls with 19 mm thick WPC, ply finished with 1 mm thick texture / suede laminate complete with necessary Hardwood, skirting , mouldings & teak wood beading on the edge etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete. The exposed frame work shall be finished with matt finsish enamel paints / polish with mellamine to match with the shade of the Laminates etc excluding GST as directed by the Engineer- in -charge..
352.27
1118457
3175
... More
WOODEN PANELING WITH SOLID SURFACE :- Providing and fixing wooden panelling suitably fixed to the walls with 19 mm thick WPC ply , finished with 6 mm thick SOLID SURFACE complete with necessary Hardwood, etc. as per the detail design including the cost of all materials, labour, overheads and T&P etc. complete. excluding GST as directed by the Engineer- in -charge.
15
253755
16917
... More
PARTITION & DOOR
-
-
-
... More
DOUBLE SKINED SOLID PARTITION FINSHED WITH LAMINATE:- Providing , fitting and fixing up partition walling aluminium anodized section no 9210 and 9207 as single groove and double respectively as horizontal and vertical member and section 4660 as tapered clip and joining angle no 1855 etc. including 12 mm th bwp ply , 1mm th suede/ texture laminate on it. as per the design and specification with necessary teak wood plain / moulded beading including the cost of all materials , labour , nails, screw adhesives, overhead T & P etc. complete. The exposed frame work shall be finished with mat finish automotive paint or polish with mellamine as per the directions of the EIC/Architect. .) excluding gst .
155.01
745443
4809
... More
LAMINATED LOW HEIGHT PARTITION:- Providing , fitting and fixing 89mm thick double skinned low height partition suitably fixed to the wall and floor and storage unit with19 mm th bwp ply frame work / almunium frame work of size 37mm x 63 x1.6 mm with angle section 40x25x1.5 mm of size at 600 mm C / C with 12mm thick bwp ply on both side and finished with 1mm thick texture / suede laminate, fixed to the ply on both sides as per the design and specification with necessary teak wood plain / moulded beading including the cost of all materials, labour, nails, screw adhesives, overhead T&P etc. complete. The exposed frame work shall be finished with mat finish automotive paint or polish with mellamine etc excluding GST as directed by the Engineer- in -charge.
33.26
143450
4313
... More
TOUGHEN DOOR
-
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete excluding GST as directed by the Engineer- in -charge.
3.15
35731
11343.2
... More
TRAP DOOR :- Providing and fixing trap doors for access to the areas above false ceiling. The trap door shall have an external frame made of 50mm x 50 mm in good quality seasoned wood scantling on which the shutter is hinged. Shutter shall be made of 12mm thk bwp ply and finished with 1.0mm thick laminate externally and automotive paint internally.Concealed heavy duty hinges shall be used to mount the shutters and locking shall be provided with panel locks. The shutter shall be moulded in level with the false ceiling forming a groove all around. Sufficient number of hinges and locks shall be provided to avoid sagging of the shutter. Key also shall be supplied for opening the shutter. No extra rate shall be provided for suspenders or frame works alround for linking the trap door to gypboard false ceiling excluding GST as directed by the Engineer- in -charge.
15
51090
3406
... More
FURNITURE & DECORATIVE ITEMS
-
-
-
... More
FURNITURE & FIXTURE
-
-
-
... More
RECEPTIOPN TABLE :- Providing & supplying of Reception table of width 600-750 MM , height 750 -1050mm with storage made out of 19 mm thk bwp ply & finished with 1.0 mm th suede /texture laminate , glass , ss pipe, 6mm TH solid surface where ever necessary . & inner surface finished with 0.8 mm th laminate & beading to be finished with automative paint or mellamine polish including all types of material, labour , hardware etc. as per the detail design & specifications excluding GST as directed by the Engineer- in -charge.
3
82890
27630
... More
RECEPTION BACK DROP :-Providing and fixing of 75-150 thick parttition with vinyl sheet / solid surface / sand stone /19 MM TH Onyx as a backdrop for the Reception. The structure shall be made of 19 mm th bwp ply members 55mmx 40mm and then over it 6mm bwp ply shall be fixed and then the corian shall be fixed to the partitions. The joints shall be finished with silicon adhesive to match withe the shade of the corian. as per the detail design and specifications and inclusive of all cost of labour, materials, T&P etc excluding GST as directed by the Engineer- in -charge.
15.88
440939
27767
... More
CONSOLE / display unit :- Providing, fitting and fixing the console /display unit made of 19mm bwp ply and finished with 1mm thick texture / suede laminate , 6 M TH SOLID SURFACE , 12 mm th glass shelf whever necessary and the exposed edges& wooden surface are to be finished with wooden lipping and finshed with automative paints/polish with melamine finish as per approved design and specifications including cost of all materials, labour, hardware if any etc. complete excluding GST as directed by the Engineer- in -charge.
3.15
66802
21207
... More
STORAGE BELOW PANTRY PLATFORM ( MODULAR ) :-
-
-
-
... More
Base Cabinets & Wall Cabinets :-Carcase is made up of bwp (Boiling Water Resistant) Plywood with Mini fix systems. Both side Laminated with all around PVC Edge Banding.
Carcase Specification Details:
1. Plywood Thickness - 18 mm after both side off-White lamination & all around PVC Edge Banding. 2. Base & Wall Cabinet Height - 700 mm. 3. Wall Cabinet Depth - 350 mm (Including Shutter) 4. Base Cabinet Depth - 580 mm (Including Shutter) 5. PVC (Polyvinyl Chloride) Front Edge Banding Thickness – (2 x 22 mm).
6. Frame Thickness- 18 mm after both side lamination & all around PVC Edge Banding.
-
-
-
... More
Shutters & Others Wood Works :- Shutter is made up of bwp (Boiling Water Resistant) Plywood with both side Lamination & all around PVC Edge Banding. Shelf & Base and Back Details:
1. Plywood Thickness -18 mm after both side lamination & all around PVC Edge Banding.
2. Laminate Thickness – 1 mm 3. PVC (Polyvinyl Chloride) Edge Banding Thickness – (2 x 22 mm)
-
-
-
... More
Hardwares :-All Kitchen Hardwares & Fittings are from HAFLE (SS 304) or as per company standards specified.
-
-
-
... More
Accessories :- All Kitchen Hardwares & Fittings are from Hetic (SS 304) or as per company standards specified.▪ PVC Cutlery Tray- 1 Pc ▪ 4" Plain Wire Basket- 1 Pc ▪ Cup & Saucer Basket- 1 Pc ▪ Thali Basket - 1 Pc ▪ 8" Plain Basket- 4 Pc, ▪ Waste Bin Holder- 1 Pc ▪ Fixed Detergent Rack- 1 Pc ▪ Magic Corner- 1 Pc(Dores) ▪ Bottle Pullout- 1 Pc ▪ Cylinder Trolley- 1 Pc etc excluding GST as directed by the Engineer- in -charge.
2.25
85500
38000
... More
MIRROR IN TOILETS
-
-
-
... More
Providing and fixing of 8mm th mirror with 8 mm th wpc ply wood at the back side and the outer surface finished with 1mm th laminate shade and excluding GST as directed by the Engineer- in -charge. ( IN THE TOILET )
14.18
77706
5480
... More
OVER HEAD STORAGE :- Providing and fixing of over head storage cabinet of depth 375-400 mm with out drawer with 19mm th bwp & 8 mm th WPC ply wood at the back side and finished with 1.0 mmth texture / suede laminates,8mm th glass in shutter and finished the teak wood lipping with mat finish enamel paint or polish with mellamine to match the laminate shade , internal surface finished with 0.8 mm th laminate as per the detail design and excluding GST as directed by the Engineer- in -charge.
1.69
27246
16122
... More
MODULAR FURNITURE
-
-
-
... More
STORAGE CABINET - LAMINATE FINISH :- Supply, Fitting & Fixing of Postlam Storage. Storage Top- Shall be made of 20mm thick Postlam (OSL) Postlam bwp Ply for low height Postlam storage up to 750 Height and above 750mm height 21mm Thick Postlam bwp Ply is used. Both the 25mm and 21mm thick Postlam bwp Postlam Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/ mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 21mm thick shelf shall be 25kgs UDL.
-
-
-
... More
Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is made from 21 mm Postlam (OSL) Postlam Ply conforming to IS 710 ;. All the exposed edges are with 2mm PVC lipping & sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 21mm Postlam bwp excluding GST as directed by the Engineer- in -charge. (APP MAKE - SOS / EQUIVALENT )
-
-
-
... More
Back Storage 450 D x 750 H
3.6
60750
16875
... More
Supply, Fitting & Fixing of Postlam Storage. Storage Top- Shall be made of 20mm thick Postlam bwp Ply for low height Postlam storage up to 750 Height and above 750mm height 18mm Thick Postlam bwp Ply is used. Both the 25mm and 18mm thick Postlam bwp Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/ mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is made from 18 mm Postlam bwp Ply conforming to IS 710;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Postlam bwp ply excluding GST as directed by the Engineer- in -charge..( APP MAKE - SOS / EQUIVALENT )
-
-
-
... More
Storage 450 D x 1200 Ht
9
203616
22624
... More
Supply, Fitting & Fixing of SOS Make SL 60 Modular workstation. Work Top- Work top shall be made 20 mm thick Postlam Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Leg/ Gabble end should be provided. Frame: -The frame shall be made of extruded aluminum sections having 60mm width and average wall thickness 1.6mm. The frame shall be powder coated with epoxy polyester powder with the average thickness 50 to 60 microns conforming to IS 13871: 1993. A-pole which is vertical supporting member of frame and horizontal members namely Top bar and Mid bar. Top bar shall be made of Aluminum extrusion having 60mm width and 1.6mm thickness and Mid bar is made up of MS pipe 15x15x1mm thick confirming the IS 13871:1993 end plates welded on both the ends .Mid bar end plate shall made up of CRCA sheet 50x20x2 mm thick confirming IS grade IS513: 2008 .Tile holder used to incorporate the tile at specified location shall be made of Aluminum. Top bar holder and leveler foot shall be made of 2mm thick CRCA confirming to IS513: 2008 with zinc coated finish. The frame shall be joined together by Aluminum connectors and all visible aluminum shall be powder coated. Main Frame shall be of 60mm thickness offering various functional and decorative finishes as well as cable management capacity. Height of frame available: 1200mm.
-
-
-
... More
Width of frame available: 1200mm. Raceway above worktop, Top tile Backpainted glass, Bottom tile MDF Postlam. Joints/ posts/ connectors/trims: - The Two frame shall be joined together in 90 degree by using post connector shall be made of CRCA sheet confirming to IS513:2008. etc excluding GST as directed by the Engineer- in -charge.APP MAKE - SOS / EQUIVALENT
-
-
-
... More
Curveliner Workstation 1500 x 1500 x 1200 Ht
12
484992
40416
... More
Providing & supplying of key board trey with mouse pad as per the detail design & specification including all cost of labour , material hardware ,etc excluding GST as directed by the Engineer- in -charge. (APP MAKE - SOS / EQUIVALENT. )
12
12000
1000
... More
Providing & supplying of cpu stand as per the detail design & specification including all cost of labour , material hardware ,etc excluding gst approved by eic . (APP MAKE - SOS / EQUIVALENT. )
12
8736
728
... More
Supply, Fitting & Fixing of Postlam Cabin table with storage . Work Top- Shall be made 20 mm thick Postlam bwp Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 21 mm thick Postlam bwp Ply to IS 710 / Metal confirmingwith 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 21 mm thick Postlam bwp Ply confirming to IS 710/ Metal Leg. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.
-
-
-
... More
The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. including all cost of labour , material hardware ,etc excluding gst approved by eic . ( APP MAKE - SOS / EQUIVALENT)
-
-
-
... More
Main Table 1800 x 750 with storage + Side Storage 1050 x 450
12
488148
40679
... More
MOBILE PEDESTAL 2D+1F :- Specificetion:- Top & Sides: 18mm Thk pre laminated particle board. Back: 9mm Thk pre laminated particle board. Edge: All exposed area with 2mm thick PVC edge lipping. Handle: Finger Groove Handle. Lock: Regular lock including all cost of labour , material hardware ,etc excluding GST as directed by the Engineer- in -charge. ( APP MAKE - SOS / EQUIVALENT)
12
64308
5359
... More
Table 1650 x 675 + Side Storage 975 x 450
-
-
-
... More
Supply, Fitting & Fixing of Postlam cubicle table . Work Top- Shall be made up of Work top shall be made 20 mm thick Postlam bwp Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure- Modesty panel shall be made of 21mm thick Postlam bwp Ply / Metal confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 20 mm thick Postlam bwp Ply confirming to IS710/ Metal Leg. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm.
-
-
-
... More
Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products excluding GST as directed by the Engineer- in -charge.. ( APP MAKE - SOS / EQUIVALENT )
1
25959
25959
... More
CHAIRS & SOFA
-
-
-
... More
Providing & supply ing * Liberate Medium Mesh Back Chair
* IS 20D Mesh *Fabric Upholstered Cushion Seat
* Multilock Mechanism
* One Way Adjustable Arms ( Height )
* Nylon Base including all cost of labour , material hardware ,etc excluding GST as directed by the Engineer- in -charge.( App make * Liberate Medium Mesh Back ChairFEATHER LITE/Equivalent )
14
189868
13562
... More
Providing & supplying of * Amaze Project Medium Back Chair * Fabric Upholstered Cushion Seat & Back
* Self Calibrating Multilock Mechanism
* Adjustable Lumbar Support
* One Way Adjustable Arms (Height)
* Nylon Base including all cost of labour , material hardware ,etc excluding GST as directed by the Engineer- in -charge. ( App make Amaze Project Medium Back Chair ,Featherlite /Equivalent )
51
539529
10579
... More
Providing & supplying of *Amaze Project Medium Back Mesh Chair * AN 70 Mesh
* Fabric Upholstered Cushion Seat
* Self Calibrating Multilock Mechanism
* Adjustable Lumbar Support
* One Way Adjustable Arms (Height)
* Nylon Base including all cost of labour, material hardware ,etc excluding GST as directed by the Engineer- in -charge. ( App make Amaze Project Medium Back Mesh Chair ,Featherlite /Equivalent )
56
519344
9274
... More
Providing & supplying of THREE Seater Tandem Sofa with Arms With black leatherette including all cost of labour, material hardware, etc excluding GST as directed by the Engineer- in -charge. ( App make SJ-820A-3S-black pvc FEATHER LITE /Equivalent )
4
89728
22432
... More
LINEN
-
-
-
... More
TRANSLUCENT ROLLER BLIND :- Providing and fixing of ROLLERS BLIND inclusive of all cost of labour,materials . (excluding GST) as per the d etail design & specificationexcluding GST as directed by the Engineer- in -charge.( Basic price Rs 500 /SFT ) APP MAKE - DEDECOR / EQUIVALENT
31.5
108454
3443
... More
DECORATIVE ITEM
-
-
-
... More
Providing & supplying of painting & art work made out of acrylic painting on canvas with pvc framing , 5 mm th glass on top & 6 mm ply on back side of the painting as per design excluding GST as directed by the Engineer- in -charge.
25
200000
8000
... More
Providing & fitting fixture of Frosted Film For Glass Brand: 3M Monomeric Calendered, White With Matt Finish, Thickness: With adhesive: 3.5-4.5 mils (0.09-0.11 mm) Glue: Permanent, Pressure Sensitive Acrylic Glue , With Polycoated Craftpaper based Liner as per the approved shade and design Including all cost of labour , taxes T & P etc as per the detail design & specifications excluding GST as directed by the Engineer- in -charge.
15
4830
322
... More
Providing & fitting fixture of 3M VINAYLE WITH LAMINATION ON WALL / WALL GRAPHICS as per the approved shade and design Including all cost of labour , T & P etc as per the detail design & specifications excluding GST as directed by the Engineer- in -charge.
50
156000
3120
... More
Providing & supplying ss toilet sinage of size 150mmx150 mm as per the approved shade and design Including all cost of labour , T & P etc as per the detail design & specifications excluding GST as directed by the Engineer- in -charge.
5
5745
1149
... More
Providing & supplying of sinage made out of lazer cut retro letter on acp with ms frame & all necessary asscories Including all cost of labour , T & P etc as per the detail design & specificationsexcluding GST as directed by the Engineer- in -charge.
5
8250
1650
... More
Providing & supplying of sinage made out of lazer cut vinayle on acrylics including all necessary asscories Including all cost of labour , T & P etc as per the detail design & specifications excluding GST as directed by the Engineer- in -charge.
5
8000
1600
... More
LANDSCAPING WORKS
-
-
-
... More
Treching in ordinary soil upto a depth of 60 cm including removal and stacking of servicable materials and then disposing of surplus soil, by spreading and neatly leveling with in a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water including cost of labour,T&P, etc, excluding GST as directed by the Engineer- in -charge. (excluding cost of imported earth, sludge or manure).
279
15456
55.4
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 Meter including cost of labour,T&P, etc, aexcluding GST as directed by the Engineer- in -charge.
(excluding cost of imported earth, sludge or manure).
30
4782
159.4
... More
Supplying and stacking of good earth at site including royalty and carriage all complete as per the direction of Engineer-in-Charge. (earth measured in stacks will be reduced by 20% for payment).
216.3
106830
493.9
... More
Supplying and stacking at site dump manure from approved source,including carriage complete as per the direction of Engineer-in-Charge. (manure measured in stacks will be reduced by 8% for payment) :
92.7
35420
382.1
... More
Rough dressing the trenched ground including breaking clods ncluding cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
515
515
1
... More
Fine dressing of the ground including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
515
1344
2.61
... More
Mixing earth and sludge or manure in the required proportion including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
309
8064
26.1
... More
Grassing with selection No.1 grass Turf including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including cost of all materials,conveyance, labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
465
90768
195.2
... More
Spreading of sludge, dump manure and / or good earth in required thickness including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
309
11309
36.6
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
-
-
-
... More
Holes 1.2m dia, and 1.2m deep.
100
23760
237.6
... More
Holes 60 cm dia, and 60 cm deep.
90
6048
67.2
... More
Preparation of mounds of various size and shape by available excavated / supplied earth, boulders including laying of Grass turfing in layers not exceeding 20 cm in depth, breaking clods, watering of each layer , dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
129.7
73150
564
... More
INTERNAL PH ( INTERNAL WATER SUPPLY & SANITARY FITTINGS)
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings jointing by solvent cement with non heating process including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
-
-
-
... More
50 mm dia CPVC SDR-11 Pipe
75
95700
1276
... More
40 mm dia CPVC SDR-11 Pipe
62
51274
827
... More
32 mm dia CPVC SDR-11 Pipe
16
9792
612
... More
25mm dia CPVC SDR-11 Pipe
32
12896
403
... More
20mm dia CPVC SDR-11 Pipe
69
20700
300
... More
Supplying all materials, labour, T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge.
-
-
-
... More
50 mm dia Brass ball valve
2
9890
4945
... More
40mm dia Brass ball valve
4
13200
3300
... More
32 mm dia Brass ball valve
4
9196
2299
... More
25 mm dia Brass ball valve
8
11040
1380
... More
Supplying all labour, T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes, filling the grooves after due testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of all machinary , conveyance etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
15mm to 32mm dia pipe
69
14076
204
... More
Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC
-
-
-
... More
In all floor
-
-
-
... More
20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall
10
440
44
... More
Supplying all materials , labour T&P and cutting hole in RCC floors, roofs, etc for passing PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the EIC
-
-
-
... More
20mm to 50mm PVC to pass in 125mm to 250mm thk RCC
10
1830
183
... More
Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent.
-
-
-
... More
Wall Mounted water closet with Intergrated type Flushing Cistern
-
-
-
... More
Water Closet- HINDWARE ELEGANCE NEO CAT NO. 20109/ Equivalent
-
-
-
... More
Concelaed cistern- HINDWARE CONCEALO NEO 80MM / Equivalent, Flush Plate- HINDWARE NOVA CHROME
17
292553
17209
... More
Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe including painting of fittings and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent.
-
-
-
... More
Under Counter Wash basin of size Size : 56 x 45 cm- HINDWARE ZEN CODE NO.10049 Starwhite/ Equivalent
20
85360
4268
... More
Providing and fixing white vitreous china standing urinal set with Installation Box with Control Cock with 175mm Long Wall Connection , including painting of fittings and brackets, cutting and making good the walls and floors wherever required as per the direction of Engineer-in-charge.
-
-
-
... More
Urinal- HINDWARE DYNA CODE NO. 60010 Starwhite/ Equivalent
5
69020
13804
... More
Providing and fixing ceramic partition for urinal with patch fitting, clamps etc including cost of all labour, material, sundries and all chrome hardware fitting etc all complete as per the direction of Engineer-in-charge. (HINDWARE CODE NO. 61005/ Equivalent)
3
19758
6586
... More
Providing and fixing of Physically Handicapped toilet set consisting of (Washbasin 65 x 35 with one pair mounting Brackets, EWC & cistern complete with fittings & seat cover, One no. of hinged rail 76 cm & five Nos. of grab rail 60 cm),including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge.(HINDWARE MATRIX-CODE NO.70002/Equivalent)
6
326424
54404
... More
Supplying all materials, labour, taxes, T & P for fitting & fixing of different water supply CP on Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours, materials, conveyance, loading and unloading and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent
-
-
-
... More
Bib Cock 2 in 1 (Hindware/Equivalent)
23
58696
2552
... More
Pillar Cock ((HINDWARE /Equivalent)
26
65052
2502
... More
Angular Stop Cock (HINDWARE /Equivalent)
60
89400
1490
... More
Health faucet(HINDWARE /Equivalent)
23
28681
1247
... More
Bottle trap( Hindware /Equivalent)
31
55366
1786
... More
Waste Coupling (HINDWARE /Equivalent)
31
16895
545
... More
Automatic Hand drier- JAQUAR / Equivalent
11
84909
7719
... More
Liquid Soap dispenser- (JAQUAR / Equivalent)
11
13453
1223
... More
Concealed Flush Valve ( push Button)-Hindware / Equivalent
5
18170
3634
... More
TOWEL RAIL (Hindware /Equivalent)
23
45448
1976
... More
SOAP DISH (Hindware /Equivalent)
23
43010
1870
... More
TOWEL RING (HINDWARE / Equivalent)
23
37191
1617
... More
ROBE HOOK (HINDWARE /Equivalent)
5
4145
829
... More
PAPER HOLDER HINDWARE /Equivalent
23
38686
1682
... More
Floor Trap- RSG 102 Anti Scratch/ EQUIVALENT
23
20700
900
... More
Flanges
109
11118
102
... More
Extension Piece
49
6419
131
... More
Urinal Spreader
5
2170
434
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.
6.3
18528
2941
... More
Providing and fixing uPVC pipe on wall face for rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, jointing with solvent cement & non heating process including fixing the pipe with clamps at 1.00 m spacing as per direction of the EIC
-
-
-
... More
110mm dia UPVC pipe S/S Type-A
220
89980
409
... More
Supply all materials, labour, T&P, fitting and fixing uPVC pipes & fittings of approved make confirming to releavant IS code including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/ floor & on walls including supply of bobbins, nails, screws, wooden cleats, pipe clamps as per requirement including earthwork excavation & fitting, including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/ SUPREME/ EQUIVALENT)
-
-
-
... More
40 mm dia UPVC S/S SCH-80 pipe
40
18120
453
... More
75mm dia UPVC SWR pipe(Type-B)
60
21120
352
... More
110mm dia UPVC SWR pipe(Type-B)
230
123740
538
... More
Providing and fixing gully trap with grating brick masonry chamber with water tight RCC precast cover with frame of following size :100x100 mm size P type. including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Gully Trap chamber ( 250 x 250 x 675mm size) with flyash bricks of minimum compressive strength 75kg/sqcm
5
8877
1775.4
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) , 125mm thick R.C.C. top slab (M-20),200mm thick foundation concrete 1:4:8 (1 cement : 4coarse sand (Zone III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete including necessary excavation etc. complete as per standard design:
-
-
-
... More
Inside dimensions 900x800mm and 450mm deep for pipe line with three or more inlets with flyash bricks of minimum compressive strength 75kg/sqcm
3
32217
10739
... More
Constructing masonry Chamber 750x750x450 mm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and 125mm thick RCC top slab (M-20), including necessary excavation, foundation concrete 1:4:8(1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
7
62783
8969
... More
Inside dimensions 750x750mm and 450mm deep for pipe line with flyash bricks of minimum compressive strength 75kg/sqcm
-
-
-
... More
Supply, Installation, Testing and commissioning of drinking water cooler cum purifier with built in 3 stage UV based advanced purification process with bottle filler facility having three No. of Faucets (2 Cold Water + 1 Normal Water) made up fo SS 304 grade body, ADA Compliant, size 640mm width X 450mm depth X 1350mm height, flexible bubbler guard , operated between 50 to 120 PSI, Chiller unit Suitable to Freon 22 Refrigerant, Adjustable thermostat control, suitable for 220-230v/50-60 hz A/C Supply Complete with all accessories which include MD-CU29, which is an EPA registered antimicrobial copper that fights off microorganisms which include MRSA and e-coli. The water Fountain shall possess NSF-USA, Green building, energy star saving certification, and to be placed at different location of buidling. Agency has to execute all civil work for installing the Water Fountain for proper functioning and aesthetic view etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Water cooler Cum Purifier- 120 Ltr Capacity. Make- Eureka Forbes/ Voltas/ Equivalent
3
302976
100992
... More
SITC of Double layer rotational moulded cylindrical vertical water storage tank including cost of all labours, materials, conveyance, loading ,unloading ,hoisting and fixing on roof top ,all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
10000
115100
11.51
... More
SUB TOTAL-A
-
-
-
... More
EXTERNAL WATER SUPPLY WORKS
-
-
-
... More
Earth work in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for the work complete in all respect excluding GST as directed by the Engineer- in- charge.
-
-
-
... More
Ordinary Soil
-
-
-
... More
Upto 1.5 Mtr Depth
66
19602
297
... More
Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge. (Measurement will be taken on finished compacted section only.)
5
4310
862
... More
Providing and laying Chlorinated Polyvinyl Chloride (CPVC) pipes & specials in trenches conforming to IS:15778 including all CPVC plain & brass threaded fittings like bend, tees, reducer etc, jointing by solvent cement with non heating process. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
-
-
-
... More
65 mm dia CPVC SCH-80 Pipe
110
230670
2097
... More
Supplying all material, labour, T & P and necessary toward laying of RCC NP2 hume pipe suitable for collar joint including cost of R.C.C hume pipe and RCC collars, laying in proper slope & gradient lowering the pipe to trench with required plastic rope without damage to the pipe & fitting with selected excavated material after laying the pipe complete etc. including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
300 mm dia. R.C.C. pipe S/S NP2
20
16516
825.8
... More
Providing & fitting fixing cast iron sluice valve with double flange ends for water work purpose conforming to IS -2685-1974 for the following rating & nomimal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
100 mm dia C.I D/F sluice valve with hand wheel (PN-10)
2
14880
7440
... More
Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
50 mm dia
5
19110
3822
... More
65 mm dia
5
34895
6979
... More
Providing & fitting fixing single valve conforming to IS: 14845-2000 for water work purpose for the following diameter including the water main as per specification including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
25mm dia single air valve with metal strap for pipe
1
2937
2937
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with SFRC surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and 125mm thick (M-20)RCC top slab, i/c necessary excavation,100mm thick foundation concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
With 1st class Fly ash Bricks
2
25962
12981
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep ( inside) with chained lid and 125mm thick(M-20) RCC top slab, i/c necessary excavation, 100mm thick foundation concrete 1:4:8(1 cement : 4 fine sand:8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
With 1st class Fly ash Bricks
2
14126
7063
... More
Design construction testing & commissioning of following ltr capacity R.C.C Underground Reservoir (UHR) as per detail drawing and specification including fitting, fixing of ladder manhole cover, level indicator, lightenening arrestor, all vertical & horizontal pipe, fitting and valve arrangement including execution of civil works. The design & drawing should be approved by the compitent authority and consultant before execution including all cost of labour, material, conveyance, T&P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
... More
Storage Reservoir
20000
137600
6.88
... More
Supply, installation, testing & commissioning of following capacity horizontal submersible pump set to install inside the production well and reservoir including all suction, delivery overflow pipe line valve arrangement & all electrical instllation like pannel board , stater, 3 core flat submersible cable etc all complete as per specification & direction of E.I.C
-
-
-
... More
5 H.P vertical submersible pumpset , Head discharge of 55mtr and 3 lps respectively
1
32196
32196
... More
10 H.P Horizontal submersible pumpset , Head discharge of 45mtr and 8lps respectively
1
31741
31741
... More
1.5 H.P Horizontal submersible pumpset , Head discharge of 120 mtr and 8lps respectively
4
67352
16838
... More
Automatic star delta control panel
-
-
-
... More
DOL Submersibble pump starter for 5 HP Vertical Subermisible pump set having voltmeter, Ammeter, selector switch, indicator lamp etc.
1
5537
5537
... More
DOL Submersibble pump starter for 10 HP Horizontal Subermisible pump set having voltmeter, Ammeter, selector switch, indicator lamp etc.
1
5537
5537
... More
DOL Submersibble pump starter for 1.5 HP Horizontal Subermisible pump set having voltmeter, Ammeter, selector switch, indicator lamp etc.
4
22148
5537
... More
50 mm dia H.D.P.E (PN-10) Riser pipe
60
11880
198
... More
4mm2 ,3 core flat copper cable for vertical submersible pump
50
14550
291
... More
6mm2 , 3 core flat copper cable for horizontal pump
50
20950
419
... More
50mm dia S.S nipple
2
698
349
... More
50mm dia C.M.N.R.V
2
5318
2659
... More
50mm dia C.M.F.W valve
2
7644
3822
... More
200 mm dia (8") BOREWELL
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/ GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the bore well) etc all complete as per direction of the Engineer -in-charge..
60
96300
1605
... More
Supplying, assembling, lowering and fixing in vertical position, casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories. materials, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
200 mm nominal inner dia uPVC Pipe (SCH-80)
30
89160
2972
... More
Cleaning and developing the bore well using their own compressor continuously worked till clear and adequate discharge is obtained from the bore well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
1
28359
28359
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell all as per requirement and direction of Engineer-in-charge.
-
-
-
... More
200mm dia
1
213
213
... More
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of borewell as per IS: 2800 (part I), including necessary bolts & nuts of required size all complete for borewell all as per requirement and direction of Engineer-in-charge.
-
-
-
... More
200 mm clamp
2
3344
1672
... More
Supplying all materials, labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/ PVC/ MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole including cost of cement etc all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing.
5
1245
249
... More
Supplying all materials, labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 200mm dia P.V.C. Casing pipe etc all complete as per the direction of the Engineer-in-Charge.
30
13650
455
... More
Supplying all materials, labour,T&P and materials for packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc complete as per the direction of the Engineer-in-Charge.
2
5390
2695
... More
SUB TOTAL-B
-
-
-
... More
EXTERNAL SEWERAGE WORKS
-
-
-
... More
Earth work in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for the work complete in all respect excluding GST as directed by the Engineer- in- charge.
-
-
-
... More
Upto 1.5 Mtr Depth
33
9801
297
... More
From 1.5 Mtr to 3.0 Mtr Depth
48
15284
318.43
... More
Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge. (Measurement will be taken on finished compacted section only.)
5.81
5008
862
... More
Supply all materials, labour, T&P, fitting and fixing uPVC pipes & fittings of approved make confirming to releavant IS code including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/ floor & on walls including supply of bobbins, nails, screws, wooden cleats, pipe clamps as per requirement including earthwork excavation & fitting, including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/ SUPREME/ EQUIVALENT)
-
-
-
... More
160 mm dia UPVC S/S SN-4 Foam Core Pipe
110
114840
1044
... More
Supplying all material, labour, T & P and necessary toward laying of RCC NP2 hume pipe push-on joint including cost R.C.C hume pipe push on type rubber gasket laying in proper slope & gradient lowering the pipe to trench with required plastic rope without damage to the pipe & fitting with selected excavated material after laying the pipe complete etc. including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
300 mm dia. R.C.C. pipe S/S NP2
10
8251
825.1
... More
Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of surrounding or encasing uPVC/RCC pipes of the following diameter including concrete for bedding and curing complete as per specification & direction of EIC.
-
-
-
... More
160 mm dia with C-1 type standard bedding
110
109780
998
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with 125mm thick R.C.C.(M-20) top slab , foundation concrete (1:4:8)mix,inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : all complete as per the direction of Engineer in charge.
-
-
-
... More
Inside size 120x90 cm and 90 cm deep including SFRC cover with frame 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg)
-
-
-
... More
With 1st class flyash bricks.
3
54216
18072.3
... More
Extra additional depth for manholes
-
-
-
... More
Size 120x90 cm
-
-
-
... More
With 1st class flyash bricks.
5
4766
953.2
... More
Design, supplying, installing, testing & commissioning of Sewage Treatment Plant (including excavation, back filling & disposal of surplus earth MS/Civil construction work) for the following duty:
5
317796
63559.3
... More
INTERNAL ELECTRICATION WORKS
-
-
-
... More
Circuit Cum Wiring
-
-
-
... More
Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2.0 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required as per direction of the Engineer -in-charge..
-
-
-
... More
Single light point controlled by one 6A switch or first light point of group control.
148
136012
919
... More
Subsequent point of group control
94
59972
638
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required as per direction of the Engineer -in-charge.
8
8192
1024
... More
Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2.0 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required.
-
-
-
... More
Single light point controlled by one 6A MCB or first light point of group control.
6
8166
1361
... More
Subsequent point of group control
14
8190
585
... More
Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required as per direction of the Engineer -in-charge..
42
22134
527
... More
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing switch board.
14
1764
126
... More
Supplying & fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular switch etc. as required as per direction of the Engineer -in-charge..
46
27370
595
... More
Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.
33
24090
730
... More
Supplying, installation, testing & commissioning of 20 Amp AC starter switch with 20 Amp modular socket outlet with 25 Amp Plug on surface or in recess, on 2 Nos two module GI box with plate etc. complete with direction of Engineer-in-charge. Starter-Crabtree or equivalent.
24
24048
1002
... More
Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required as per direction of the Engineer -in-charge..
-
-
-
... More
2X2.5 + 1X1.5 sqmm FRLSH Cu wire in 20mm dia PVC conduit
810
142560
176
... More
2X4 + 1X2.5 sqmm FRLSH Cu wire in 20mm dia PVC conduit
342
65664
192
... More
2X6 + 1X4.0 sqmm FRLSH Cu wire in 25mm dia PVC conduit
450
148500
330
... More
4X6 + 2X4.0 sqmm FRLSH Cu wire in 32mm dia PVC conduit
580
420500
725
... More
4X10 + 2X6 sq. mm FRLSH Cu wire in 32mm dia PVC conduit
160
130560
816
... More
Fan & indoor Fixtures
-
-
-
... More
Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
42
5040
120
... More
Supplying, installation, testing and commissioning following type of light fixtures with dummy box for surface mounted fixtures only, fans and exhaust fans with all accessories, as required as per direction of the Engineer -in-charge..(The colour temprature for fixtures shall be between 5600 deg K cool white in colour as per application)
-
-
-
... More
Commercial Batten type wall mounted 4' LED fitting (2200 Lumen/ 20W) similar to PHILIPS (CAT No. :BN30BC LED20S 6500 PSU L120 GR S4)
39
91962
2358
... More
Down type LED Light recessed fitting (700 Lumen/ 6 W) similar to PHILIPS (CAT No:DN295BC LED6S 6500 PSU WH)
48
67440
1405
... More
Recessed mounted round LED fitting (1800 Lumen/ 15W) similar to PHILIPS (CAT No:DN296B LED15S-6500 PSE WH S1)
132
323532
2451
... More
Endura type 600 Lumen/10W LED Bulkhead wall fitting PHILIPS (CAT No:WT202W LED6S NW PSU S2 PC)
24
38736
1614
... More
Commercial Batten type wall mounted 2' LED fitting (1200 Lumen/ 12W) similar to PHILIPS (CAT No:BN021 LED12S 6500 L60 PSUGR)
12
7884
657
... More
Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required as per direction of the Engineer -in-charge.
-
-
-
... More
1200 mm sweep
42
125496
2988
... More
Supplying, installation, testing and commissioning of wall mounted fan including earthing etc as required as per direction of the Engineer -in-charge.
-
-
-
... More
400 mm sweep 1300 RPM
6
16044
2674
... More
Supplying, installation, testing and commissioning of Heavy Duty Exhaust fan including louvres, Ceiling Rose & Electric Connection as required as per direction of the Engineer -in-charge..
-
-
-
... More
300mm sweep 900 RPM
24
70344
2931
... More
Panels, MDBs, DBs. MCBs
-
-
-
... More
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated Bottom entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required as per direction of the Engineer -in-charge..
-
-
-
... More
LT Cum AMF Panel
-
-
-
... More
Busbar - 200 Amp Al busbar with SC rating of 36 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply.
-
-
-
... More
Incomers:
-
-
-
... More
One (1) Incomer from 100 KVA Substation is comprising of
-
-
-
... More
One (1) - 160 Amp FP, 36 KA, MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 160/5 A 10VA Cl 1.0 CTs, MFM With S/S.
-
-
-
... More
One (1) - 160A FP, 36 KA Contactor with microprocessor controlled OL/ SC and EFreleases, shunt trip release, under voltage release with definite time, auxilliary contactor and terminals taken out suitable for termination of bus trunking, Mechanical & Electrical interlocking as required as per direction of the Engineer -in-charge..
-
-
-
... More
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.
-
-
-
... More
One(1)- Trip Push Button.
-
-
-
... More
One(1) Set- Trip Circuit Healty Test Push Button with Indicating Lamp.
-
-
-
... More
One (1) Incomer from 100 KVA DG AMF Panel is comprising of
-
-
-
... More
One (1) - 160 Amp FP, 36 KA, MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 160/5 A 10VA Cl 1.0 CTs, MFM With S/S.
-
-
-
... More
One (1) - 160A FP, 36 KA Contactor with microprocessor controlled OL/ SC and EFreleases, shunt trip release, under voltage release with definite time, auxilliary contactor and terminals taken out suitable for termination of bus trunking, Mechanical & Electrical interlocking as required as per direction of the Engineer -in-charge..
-
-
-
... More
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.
-
-
-
... More
One(1)- Trip Push Button.
-
-
-
... More
One(1) Set- Trip Circuit Healty Test Push Button with Indicating Lamp.
-
-
-
... More
One (1) Incomer from 5 KWP Solar PV is comprising of
-
-
-
... More
One (1) - 32A FP, 25KA,MCCB.
-
-
-
... More
One(1) set of – 32/5A , 10VA , CL 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB.
-
-
-
... More
Outgoing:
-
-
-
... More
Two (2) - Outgoing Feeders (for One no 45 KVAR APFC Panel & one spare each comprising of
-
-
-
... More
One (1) - 100A FP, 25KA,MCCB.
-
-
-
... More
One(1) set of – 100/5A , 10VA , CL 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB.
-
-
-
... More
Fourteen (14) - Outgoing Feeders (for one STP, Eight nos TPN DB, 1 no. Medium EV Charging Station(future) , two nos Lift-1,2 Panel & 2 nos spare each comprising of
-
-
-
... More
One (1) - 63A FP, 25KA,MCCB.
-
-
-
... More
One(1) set of – 63/5A , 10VA , CL 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB.
-
-
-
... More
Eight (8) - Outgoing Feeders (for 1 no Water Supply Pumps, 1no Terrace Fire Fighting Pump Panel , 4 nos TPN DB , 1 no. UPS I/C Breaker & 1 no. spare ) each comprising of
-
-
-
... More
One (1) - 32A FP, 25KA,MCCB.
-
-
-
... More
One(1) set of – 32/5A , 10VA , CL 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB.
-
-
-
... More
Two (2) - Outgoing Feeders each comprising of
-
-
-
... More
One (1)- 32 Amp FP, 10 KA MCB with 32 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required as per direction of the Engineer -in-charge..
-
-
-
... More
*Necessary interlocking for auto start/auto stop AMF control such that 1 Nos. T/F incomer, 2 No of Contactors,1 Nos DG incomers, shall be successfully operational in all possible combinations.
-
-
-
... More
*The Switchboard shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
-
-
-
... More
Battery/Battery charger
-
-
-
... More
Supplying, installing, testing and commissioning of 230 V, Single Phase, 50 HZ, AC operated suitable capacity AH battery with Battery Charger for DC supply of following rating with Boost and trickle charging facility and protection from over charging a DC DB with required numbers of outgoing DP MCB's plus 2 Nos. of 16 Amp. DP MCB's as spare feeders complete as required and as per specifications as per direction of the Engineer -in-charge..
-
-
-
... More
PANEL AS ABOVE
1
428633
428633
... More
APFC Panel(45 KVAR)
-
-
-
... More
Busbar - 160 Amp Al busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply
-
-
-
... More
One(1) - Incoming feeder having
-
-
-
... More
One (1) - 100 Amp, 25 KA TP MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 100/5 A , 15VA, Cl 1.0 CTs, Digital Voltmeter, Ammeter, 2 nos Ventilation fan.
-
-
-
... More
One(1) No. 5 steps (required for the follwoing) Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, Power Factor. Controller should be mounted on the front side of the panel. Bank with 45 KVAR capacity having 3 phase MPP based heavy duty dielectric low loss as per ECBC+/IS 7752 guidelines or 0.5w/kVAR ISI marked power capacitor (1x15+2x10+2x5) and provided with capacitor duty contactor based switching to supress switching of inrush current .Suitable rating Al. PVC insulated bus bar & interconnections shall be included. The panel shall be complete with minimum 7% detuned reactors (only filters)for harmonics control as per direction of the Engineer -in-charge..
-
-
-
... More
Five (5) Outgoing Feeders each provided with MCCB, Contactor, ON/OFF push button and indicating lamp and capacitor banks
-
-
-
... More
One (1)-Outgoings each having
-
-
-
... More
One (1) - 63A TP,10 KA,MCB (D-Curve)
-
-
-
... More
One (1) - Capacitor duty contactor suitable for 15 KVAr capacitor
-
-
-
... More
One (1) - 15 kVAr, 480V, TP Heavy duty capacitor with internal wiring, fuses,Harmonic Filter (7%) etc. complete as required
-
-
-
... More
Two (2)-Outgoings each having
-
-
-
... More
One (1) - 32A TP,10 KA,MCB (D-Curve)
-
-
-
... More
One (1) - Capacitor duty contactor suitable for 10 KVAr capacitor
-
-
-
... More
One (1) - 10 kVAr, 480V, TP Heavy duty capacitor with internal wiring, fuses,Harmonic Filter (7%) etc. complete as required
-
-
-
... More
Two (2)-Outgoings each having
-
-
-
... More
One (1) - 25A TP,10 KA MCB (D-Curve)
-
-
-
... More
One (1) - Capacitor duty contactor suitable for 5 KVAr capacitor
-
-
-
... More
One (1) - 5 kVAr, 480V, TP Heavy duty capacitor with internal wiring, fuses,Harmonic Filter (7%) etc. complete as required
-
-
-
... More
(i) All the capacitors shall be suitable for 480 V rating
-
-
-
... More
(ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided.
-
-
-
... More
(iii) Two nos 300 mm sweep Heavy duty exhaust fans to be provided
-
-
-
... More
(iv) LED indication for number of capacitor banks ON & Power Factor lagging or leading.
-
-
-
... More
(v) The APFC shall be protected from following
-
-
-
... More
* Over-voltage & voltage unbalance * Total Harmonic Distortion
-
-
-
... More
* Over temperature-system should be in standby mode and automatically restart after above condition restored.
-
-
-
... More
PANEL AS ABOVE.
1
157592
157592
... More
UPS PANEL(O/G)
-
-
-
... More
One (1) no. Incomer- 32 Amp TPN ,25 KA MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB Digital Voltmeter and Ammeter with selector switch with other required accessories.
-
-
-
... More
Busbar - 32 Amp,25KA Cu TP2N busbar suitable for operation at 415 Volt, 50 Hz, 3 Phase supply
-
-
-
... More
Four(4) - Outgoing Feeders for (3 Nos of UPSDB & One spare) each Comprising of
-
-
-
... More
One (1) - 32 Amp 4P, 10 KA MCB (C-Curve)
-
-
-
... More
Five(5) - Outgoing Feeders for (One Server, One CCTV, One Fire Alarm wih PA System, One ELV System & One spare ) each Comprising of
-
-
-
... More
One (1) - 32 Amp DP, 10 KA MCB (C-Curve)
-
-
-
... More
PANEL AS ABOVE.
1
69562
69562
... More
UPS Incomer
-
-
-
... More
One (1) no 32 Amp TPN ,25 KA MCCB with required other accessories & suitable metal enclosure concealed in wall for power supply to 10KVA UPS.
1
3576
3576
... More
DBS
-
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required as per direction of the Engineer -in-charge.. (But without MCB/RCCB/Isolator). (For all Floor DBs).
-
-
-
... More
4 way (4 + 12), Single metal door
8
33816
4227
... More
6 way (4 + 18), Single metal door
8
41296
5162
... More
Supplying and fixing following rating MCBs/ Isolator/RCCB in the existing MCB DB complete with connections,testing and commissioning etc. as required as per direction of the Engineer -in-charge..
-
-
-
... More
63 Amps, FP 10 KA MCB (C-Curve)
8
16928
2116
... More
32 Amps, FP 10 KA MCB (C-Curve)
8
12128
1516
... More
6 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
184
60904
331
... More
Cables, Cable Laying & Termination
-
-
-
... More
Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
-
-
-
... More
3C X 4 sqmm
450
77850
173
... More
4C X 10 sqmm
650
203450
313
... More
4C X 16 sqmm
120
45000
375
... More
3.5C X35 sqmm
110
58740
534
... More
3.5C X50 sqmm
240
171600
715
... More
3.5C X120 sqmm
80
118640
1483
... More
Supplying & Testing of 1.1 KV grade Cu XLPE Un Armoured(Flexible) power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
-
-
-
... More
1C X 6 sqmm
30
3240
108
... More
CABLE LAYING
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
552
86112
156
... More
Above 35 sq. mm and upto 95 sq. mm
290
48720
168
... More
Above 95 sq. mm and upto 185 sq. mm
70
12530
179
... More
Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/MASONERY TRENCH/HDPE Pipe/Metal Pipe/On Wall Surface(Clamped with saddle/PVC & UPVC Pipe)/ CableTray as required as per direction of the Engineer -in-charge..
-
-
-
... More
Upto 35 sq. mm
498
15936
32
... More
Above 35 sq. mm and upto 95 sq. mm
230
20010
87
... More
Above 95 sq. mm and upto 185 sq. mm
10
1020
102
... More
TERMINATION OF CABLES
-
-
-
... More
Supply & Making end Termination with brass compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
-
-
-
... More
3C X 4 sqmm(19 mm)
21
3801
181
... More
4C X 10 sqmm(19 mm)
42
8778
209
... More
4C X 16 sqmm(28mm)
30
6780
226
... More
3.5C X 35 sq. mm (32mm)
6
1386
231
... More
3.5C X50 sqmm(35 mm)
16
3776
236
... More
3.5C X 120 sq. mm (45mm)
4
1272
318
... More
Supply & making of Sigle Compression cable glands and crimping type Cu. cable lugs with required tools and equipments as per IS. The glands and lugs shall be suitable for 2XY cables as per direction of the Engineer -in-charge..
-
-
-
... More
1C X 6 sqmm
22
4048
184
... More
Supply and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal) (for Gate crossing)
68
6460
95
... More
200 mm dia (OD-200 mm & ID-175 mm nominal) (for Road crossing)
125
54750
438
... More
CABLE TRAY
-
-
-
... More
Supply, fabricating and installing following size of hot dip G.I. perforated type cables trays including suspending from ceiling with angle, rods connection pieces, horizontal vertical bends, reducers, tees, cross members,G.I. nut bolts, G.I. washers, fasteners etc. complete as required per specifications & approved by the Engineer Incharge.
-
-
-
... More
150 mm width X 60 mm depth X 1.5 mm thickness
120
105000
875
... More
Supplying of Cable Ladder with horizontal & vertical bends, reducers, Tee's,Cross over, supports, brackets and other accessories as required confirming to IS/IEC-61537.The Cable Ladder shall be made of 1.5mm thick sheet steel upto 600mm.The cable Ladder shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The cable ladder should be tested for safe working load of minimum 70 Kg/ Mtr with a span distance of 2 Mtr the deflection should be within the limits as per standard. The cable ladder shall be supplied in standard length of 3000 mm. The rung size shall be of 30x15mmm size suitable for fixing the cable clamps the space between the rungs shall be 300mm. etc. complete as required per specifications & approved by the Engineer Incharge.
-
-
-
... More
200 mm width X 50 mm depth X 1.5 mm thickness
110
181610
1651
... More
Conduits
-
-
-
... More
Supply, delivery and laying of following sizes of medium class PVC Conduit concealed in wall/ column/ roof slab of the building alongwith other accessories and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data cable wiring as required other accessories as per direction of Engineer-in-charge.
-
-
-
... More
20mm dia
480
41760
87
... More
25mm dia
625
58125
93
... More
UPS
-
-
-
... More
Supply ,installation ,testing & commissioning of S600UPS 10KVA ON LINE UPS SYSTEM 10 KVA rating 3 Ph(415V-/+15% Volts) input & 3Ph output (415+/-15%), 50Hz, kbs IGBT Based Technology Inbuilt kbs Isolation Transformer with 30 min back-upwith standard make of accessories for installation. with Suitable Battery Bank for 30 min back up with Sealed Maintenance Free Battery. Make: Amararaja/Exide/Eq., kbs racks for Battery bank including all connection. LOAD OF emergency) as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 1 year & compelete test certificate must be submitted along with ups including component list & SLD (having bypass provision).
1
457000
457000
... More
Earthing
-
-
-
... More
Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required as per direction of the Engineer -in-charge..
24
121992
5083
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia GI pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and refilling etc. as required as per direction of the Engineer -in-charge..
410
441980
1078
... More
Providing and fixing 25 mm X 5 mm dia copper strip on wall/surface or in recess for connection etc. as required as per direction of the Engineer -in-charge..
220
194260
883
... More
Providing and fixing 4.0 mm dia Cu wire on surface or in recess for loop earthing as required as per direction of the Engineer -in-charge..
650
63700
98
... More
Lightning Arrester
-
-
-
... More
Supply, delivery, installation, testing & Commissioning of ESE Air Terminal ESE-60 comprised of separate electrically isolated dual copper panels surrounding an Earthed central finial should be coated with chrome for environmental protection which will be install on the concrete base frame of size 900mm x 900 mm x 900 mm on the top of the roof of the building. The upper section of the central finial shall be rated to withstand 40KA impulse current and it should be made up of solid brass rod and its length should be more than 85mm above the surrounding panels. The insulation material used to electrically isolate the panel shall be comprised of base polymer which provides high UV resistance with die electric strength of 24-38KV/MM ESE terminal must withstand a minimum switching impulse voltage of 500KV. Its adapter should be made up of non conductive material DELRIN, which should provide good abrasion resistance, good mechanical strength, pretty good heat resistance, good electric & dielectric properties & Low water absorption. Terminal performance should be tested as per NFC 17-102:2011 standard .Terminal should be tested for impulse current withstand test in CPRI for 40 KA.Terminal shall carry 05 yrs warranty by manufacturer as per direction of the Engineer -in-charge..
1
143000
143000
... More
Supply, delivery, installation, testing & Commissioning of 5.0 mtr long of 50 mm dia Class “B’ S.S Pipe with base plate, guying kit and mounting accessories etc. of lightning mast pole to be installs at the top of the roof which shall be non corrosive and PVC insulated metallic wire rope as guy wire. The down conductor shall pass through the centre of the pole for the entire length of the pole and it will be out at bottom of the pole complete as per the site requirements as per direction of the Engineer -in-charge.
1
18000
18000
... More
Supply & laying of 70sq.mm PVC insulated multi-sanded of single core flexible Copper cable for down conductor. It should run inside rigid PVC conduit to be fixed using SS/GI saddles & fixtures every 0.5mtr on the existing wall of the building complete as per the site requirements as per direction of the Engineer -in-charge..
25
21250
850
... More
Supply, delivery, Installation, testing & Commissioning of Maintenance free Safe Earthing Electrodes with ISI marked 03 mtr long 75 mm dia Class “B” S.S Pipe earth electrode with 50 mm X 6 mm M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive filled with compound of 02 bag @ 25 kg per bags for each earth electrode with Solid G.I. Base plate seals the unit at the bottom. Ground Filling Compound filled surrounding to earth electrode as per direction of the Engineer -in-charge..
2
22000
11000
... More
SITC of Lightning Strike Recorder (L.S.R.): Supply of Australian make L.S.R. It should be non electronic& non- resettable type having 7 digits display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A & maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1: 1989. It should be non electronic type and does not require external power supply for working. Supplier should do on site testing of LSR, where impulse generate should be used to show working of LSR. After impulse current passing through LSR it should change the counter reading as per direction of the Engineer -in-charge..
1
30388
30388
... More
Miscellaneous Items
-
-
-
... More
Supplying and fixing 3 nos GI fire bucket of 9 ltr capacity with suitable pedastal arrangement for sub-station yard etc as reqd.
4
22400
5600
... More
Supplying 11 kV hand gloves as reqd.
2
2300
1150
... More
Supplying and Laying Rubber mat 1M X 2M X 2.0MM thick to withstand 1.1 KV dielectric strength, Electrical Safety/Shock Chart & SLD etc as required.
4
9856
2464
... More
Supply & laying of 11KV Grade best quality Rubber Mat.
4
1880
470
... More
Supplying & fixing Route Markers for LT UG Cable lines.
16
3840
240
... More
Providing and fixing LT danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
748
187
... More
Supplying of First aid box as approved by St.John Ambulance Brigade/Indian Red Cross Society and confirming to IS 2217/ 1963.
1
410
410
... More
S/F of Shock Treatment chart duly glazed mounted on Aluminum Frame with sheet glass as required.
3
1530
510
... More
Providing & fixing of M.S. angle iron with fixing materials and painting for cable racks in trenches/ on walls etc .as required.
60
5100
85
... More
Supplying of Caution Boards manufactured out of 16 SWG, MS sheet of 450mmx 300mm size duly painted white and having `MAN ON LINE' and 'DO NOT SWITCH ON' written in Red complete with hanging arrangement as required and & approved by the Engineer Incharge.
2
280
140
... More
External Electrification Work
-
-
-
... More
100 KVA DG Sets & Other Accessories
-
-
-
... More
DG Set
-
-
-
... More
Supplying, Installation, Testing and Commissioning of AMF starts Silent Diesel Generating Set having prime power rating of 100 KVA at 0.8 pf at NTP conditions (Alternator directly coupled with Diesel Engine) suitable for automatic operation on mains failure Panel complete in all respect and comprising of following and as per specification enclosed, suitable for indoor installation as per direction of the Engineer -in-charge..
-
-
-
... More
A. Alternator : Self excited, self regulated, brush less type 415 Volt 3 phase 50 Hz synchronous generator delivering 100 KVA at 0.8 PF (lag) at NTP condition Conforming to IS/ IEC 60034- 1, screen protected self regulated + 1% regulation, IP 23 protection with insulation Class-H, AC alternator complete with, 125 Amp MCCB and outgoing terminals taken out for connecting through Cable along with all accessories as per direction of the Engineer -in-charge..
-
-
-
... More
B. Engine : Four(4) stroke, Multi-cylinder Turbo charged Radiator Cooled Diesel Engine of suitabe BHP (to give prescribed output excluding power consumption for running Auxiliary Accessories) operating at 1500 rpm, daily fuel tank of minimum 125 ltr capacity duly calibrated including medium class MS piping for fuel piping from day tank to Engine and back, residential type silencer, SS flexible below for exhaust pipe and 12/24 V DC starting arrangement with minimum 1 Or 2 Nos of 12/24 V battery having Ampere- Hr rating as prescribed by the manufacturer of Engine along with battery charger, as required as per direction of the Engineer -in-charge..
-
-
-
... More
C. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting as per standard practice of manufacturer etc. required as per direction of the Engineer -in-charge..
-
-
-
... More
D. AMF Panel: AMF Panel suitable for 100 KVA DG Set fabricated with 2.0 mm thickness CRCA Sheet duly Powder coated after Seven tank process and provided with Contactors as required along with Logic Controllers Relays including Aux. Relays, time delay relays, auto/manual selector Switch, ON/OFF Push Button, battery Charger. multi functional meter with RS Port, necessary instruments & indicating lamps suitable bottom entry cable termination
-
-
-
... More
E. Acoustic Enclosur: The acoustic enclosure is made of 14/16 gauge CRCA sheet. The salient features of acoustic enclosure are:- The enclosure is of modular construction with the provision to assemble and dismantle easily at site finished with powder coat painting of approved colour.
-
-
-
... More
a)The Sheet metal components are Seven Tank pre treated before powder coating.
-
-
-
... More
b)The door are gasketed with high quality EPDM gaskets to prevent leakage of sound as well as door handles are lockable type.
-
-
-
... More
c) Specially designed attenuators to control sound at air entry and exit points.
-
-
-
... More
d) Adequate ventilation to meet total air requirements.
-
-
-
... More
e) Temprature of enclosure should not exceed beyond 5-7°C of ambient temperature.
-
-
-
... More
f) Emegency shut down button from outside the enclouser.
-
-
-
... More
g) Noise level; 75 DB (A) at 1 mtr Distance.
-
-
-
... More
DG set as above
1
1287000
1287000
... More
Supplying and laying MS pipe for horizontal and vertical run of Exhaust piping with asbestos lagging and Al sheet cladding along with clamps and supports above 3 mtr etc from the roof of DG Set as required.
12
105600
8800
... More
Supply of Hand pump to pump the HSD fuel from barrels to the DG tank with flexible hose pipes etc as required.
1
5000
5000
... More
Metering for DG Set
-
-
-
... More
Supplying, installation, testing & Commissioning of LTTV 3ph 4wire 3x240V,-/5A,0.5S Class DLMS-C complied static meter with SMC Box with 200/5A LTCT Arrangement.
1
9078
9078
... More
Supplying, laying, testing & Commissioning of 2Core 2.5Sq MM Cu Control Cable (un-armoured)
130
12870
99
... More
Supplying, laying, testing & Commissioning of 4Core 2.5Sq MM Cu Control Cable (un-armoured)
180
29340
163
... More
Supplying and fixing of 75X40X6 MM MS Channel.
20
1880
94
... More
Supplying and fixing of 50X50X6 MM MS Angle.
15
1410
94
... More
Civil Work
-
-
-
... More
Construction for DG metering foundation.Complete in all respect with instruction of EIC.
1
1002
1002
... More
Constrution of DG foundation with M-20 Grade RCC(1:1.5:3) of size 4.6m(L)X1.8m(W)X0.5m(H) with provisioning of 110 PVC piping for Cable laying with all other required accessories as per the direction of Engineering Incharge.
1
54638
54638
... More
Supply of material & Construction of LT Cable trench from Distribution Box at S/S to LT panel Board for laying of LT Cable with covering RCC Slab.
50
161700
3234
... More
External Light Fittings
-
-
-
... More
Design, supplying, installation testing and commissioning following type of external light fixtures with all accessories as required.
-
-
-
... More
Single Arm Street Lights:
-
-
-
... More
Supply, erection, testing & commissioning of road lighting HDG Octagonal Pole conforming to IS 875 and BS EN ISO 1461 & 410 SP 33 of 7.0 metre with base plate drilling of 1" dia hole on the upper portion of the pole for the installtion of street light and 1" dia hole on the lower portion of the pole for entry of the wire Base pole paintng of red oxide and two coats of black enamel paint. The poles shall have extra provided and fixed with 4'x2' dia being erected by laying 5'x2'x2' (length, breadth and width) cement concrete block in the ratio 1:3:6 and block be continued up to 1 feet above the ground level i.e 4 feet below ground level including surface plastering the job including excavation of pole with 4 feet deep and refilling the same after installation of the pole and with holes at top of the pole for fixing ring type single armed GI braket for the installation of the integral flood light luminaire up to 72 watt. The Dust and wheather proof gasket using for 250mmx200mmx150mm deep box nominal size of 16 SWG thick MS sheet cable looping box with the existing pole with MS clamp made out of 25mmx3mm thick flat iron with suitable nuts and bolts complete with hinged cover and locking screws earth studs neoprene gasket suitable for Nos 4 pole mounted including supply and fixing one no 6 Amp MCB carrier with base and 4 way 63 Amp terminal block suitable to receive PVC armoured cable fixed on suitable size Baketillte sheet base complete connection through GI pipe (classB) 40 mm dia Nominal 1.5 mtr length along the pole or protection of underground cable (on vertical run) with painting all complete as the direction of EIC.
6
189456
31576
... More
Supply, installation, testing & commissioning of 35 watt integral flood light with driver inside a PDC housing Led Light with aluminium die cast housing luminaire with unique lens system for uniform illumination and toughened glass with silicon gasket for IP-66 protection along with CC/bricks pedestal & loose wire box (or connectors 50 MM Dia 4 mtr Height GI Tubular Pole with one 6A MCB) for loop in loop out type as required as per direction of the Engineer -in-charge..
6
34392
5732
... More
Feeder Pillar for External Lights
-
-
-
... More
Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 Amp Al busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
-
-
-
... More
1 No - 32 Amp TPN MCB Incomer
-
-
-
... More
4 Nos - 16 Amp SP MCB Outgoing
-
-
-
... More
1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
1
45000
45000
... More
SOLAR SYTEM
-
-
-
... More
Supply installation, testing & commissioning of Solar photovoltaic Hybrid Power Plant of 5KWp. with necessary Mono/Poly crystalline SPV Module of (320Wp or higher Module),Power conditioning Unit(5 KVA On-grid Solar Inverter with MPPT, with Net-Metering arrangement ,AC Distribution Board for 5KWp as per Dwg, Array Junction Box, Mounting Structure with frame & foundation lighting arrester, Earth Pit, Danger Boards, Cables as per specification, Stand Energy Meter(for Net Metering), with Smart system controller panel (Hybrid MNRE approved Solar Inverter), Remote Monitoring & accessories. The products should meet to MNRE standards. The contractor shall obtain permission from TPCODL on behalf of the Owner.
1
325000
325000
... More
AIR CONDITIONING WORKS
-
-
-
... More
Supply, Installation, Testing & Commissioning of 1.5 Tonne capacity Single Phase, 5 -Star rated Inverter Hi-wall Split AC with 4KVA stabilizer (BEE: 5star rated ) all copper condenser & evaporator coils and with cordless remote control including cost of copper piping upto 3 metre. The Piping to be laid through sleeve with white taping and to be clamped neatly. Wall openings are to be sealed and finished using cement plastering as per direction of the Engineer -in-charge..
24
1500000
62500
... More
Supply & erection of copper piping using copper refrigeration pipe complete with elbows, bends, supports, Insulation etc. interconnecting indoor and outdoor units(both suction and discharge lines shall be measured together as single unit) along with necessary electrical copper wiring through 20mm rigid PVC Pipe. Insulation using 4mm thick nitrile rubber sleeve insulation with teflon taping. ( beyond 3meter for split AC)
80
14800
185
... More
Supply and erection of 25mm dia insulated PVC drain water piping (4kg/sq.cm) upto just above ground level for all Acs including Split Acs and its insulation using 4 inch thick nitrile rubber sleeve insulation.
80
6240
78
... More
Supply and installation of readymade powder coated MS stand/angle heavy duty support for split AC outdoor units.
24
43200
1800
... More
SITC of communication cable ( control and power connection) for interconnection between IDU &ODU as specified by the manufacturer measured as running meter (single unit)
80
9440
118
... More
Supply and erection of 4 inch dia (4kg/sq.cm)PVC piping between indoor unit for taking the insulated suction, liquid and drain lines. The piping to be laid with enough slope and to be suspended using threaded rods.
22
2420
110
... More
Data Net Working, Telephone(IP EPBX) & CCTV System
-
-
-
... More
Supply,Installation,Testing & Commissioning of 4 pair Cat6 U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant.
850
48450
57
... More
Supply,Installation,Testing & Commissioning of Cat6 I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified as per direction of the Engineer -in-charge..
-
-
-
... More
I/O Dual
10
12930
1293
... More
I/O Single
18
12690
705
... More
Supply,Installation,Testing & Commissioning of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking as per direction of the Engineer -in-charge..
2
27944
13972
... More
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies as per direction of the Engineer -in-charge..
-
-
-
... More
1mtr Lenghth
14
5138
367
... More
2mtrs Length
14
6594
471
... More
Supply,Installation,Testing & Commissioning of L-2 Managed Switch with minimum 24 X 10/100 Base-T ports and additional 4 nos. SFP upl ink ports , Switch should have mia 56 Gbps Switching Fabric and I6K MAC Address, Support 1Pv6 Management , support LEEE 802.17/equivalent for sub 50ms ring protection, lGMP and MLD snooping, Operating temperature 0 to 50 degree C, Shou ld support CLl, GUl, USB or equivalent interface for talcing backu p, UDLD and single LP management of min 24 switches.
1
30625
30625
... More
Supply,Installation,Testing & Commissioning of 24x 10/100/1000 Ethernet L2 Fully Managed Switch with 370W PoE budget, 4x 1G SFP uplinks. Switch should support 802.1Q VLAN, MSTP, L2 & L3 . All hardware should supplied with necessary mounting brackets and IN power cord with 3 years warranty.
1
72530
72530
... More
Supply,Installation,Testing & Commissioning of 24x 10/100/1000 Ethernet L3 Fully Managed physically stackble Switch with 4x 1/10G SFP+ uplinks. Switch should support 802.1Q VLAN, MSTP, L2 & L3 ACLs, L3 static and Dynamic routing and redundancy features like RIP, OSPF, HSRP for IPv4 and IPv6 protocol stack with Dedicated USB managed ports All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty.
1
151048
151048
... More
Supply,Installation,Testing & Commissioning of 1000BASE-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM.
1
11812
11812
... More
Supply,Installation,Testing & Commissioning of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket.
150
15750
105
... More
Supply,Installation,Testing & Commissioning of 12 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss.
1
16782
16782
... More
Supply,Installation,Testing & Commissioning of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 2M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db.
6
15282
2547
... More
Supply,Installation,Testing & Commissioning of IP PBX System support up to 100 users and minimum 60 concurrent calls, integrated 4 PSTN trunk FXO ports through External Gateway, 4 analog telephone FXS ports with lifeline capability and up to 50 SIP trunk accounts, Gigabit network ports with Integrates PoE, USB, SD card, Supports up to a 5-level IVR (Interactive Voice Response), Supports any SIP video endpoint that uses the H.264, H.263 or H.263+ codecs as per direction of the Engineer -in-charge..
1
81287
81287
... More
Supply,Installation,Testing & Commissioning of IP Based PoE Phone, 2 SIP accounts, 2 line keys, 3-way conferencing, 3 XML programmable context-sensitive soft keys, Dual-switched 10/100 mbps ports, integrated PoE, HD audio on speakerphone and handset as per direction of the Engineer -in-charge..
4
25120
6280
... More
Supply,Installation,Testing & Commissioning of 4MP Dome IR Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with accessories as requireas per direction of the Engineer -in-charge..
18
184284
10238
... More
Supply,Installation,Testing & Commissioning of 4MP Bullet IR Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with accessories as require as per direction of the Engineer -in-charge..
8
83120
10390
... More
Supply,Installation,Testing & Commissioning of 4MP Motorised Verifocal Bullet IR Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8-12mm Fixed lens, physical ICR filter of both day and night, 50mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with accessories as require as per direction of the Engineer -in-charge..
6
83964
13994
... More
Supply,Installation,Testing & Commissioning of 2MP IP PTZ Network Camera 1/2.8" CMOS, ICR, 1920x1080:30fps, Ultra 265/H.264/MJPEG, Triple streams, DC12V, Micro SD card slot up to 256gb, -40-65 °C, IP66, 25x optical zoom(5.2~ 125mm), IR range: up to 150m, IR anti-reflection window IP66 rated for weather proofing, ONVIF, POE IEEE 802.3af (UL, FCC, CE, BIS certified) with suitable poles & foundation as required as per direction of the Engineer -in-charge..
2
123228
61614
... More
Supply & Installation of 32 Channel fully Featured NVR with High decoding capability for Ultra 4K HD viewing up to MP(4K) resolution live view, Preview & Playback, Internal storage supports 4 HDDs expandable up to 40 TB (10TB each). Record bit Rate (320Mbps), 2 HDMI/ VGA simultaneous video, usb ports 3 (2 rear USB3.0; 1 front USB2.0. RS232 1 port (for PC communications and keyboard).) The Quick Wizard and no PoE support . Should have post event recording interval 30s (max 60s ).Should have camera Alarm in ,(smart) motion detection,video loss, camera tamper intrusion,Multi loitering ,crowd detection .Resolution should be upto 3840x2160 and frame rate 30 fps Make-Honeywell/Pelco/Axis /Bosch/Eq. as per the direction of Eng-in-charge.
2
182000
91000
... More
Supply,Installation,Testing & Commissioning of 10TB Surveillence Hardisk.
3
69684
23228
... More
Supply,Installation,Testing & Commissioning of 55" UHD IPS Commercial Digital Display, Brightness (330 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty.
1
65000
65000
... More
Lift
-
-
-
... More
Design, Fabrication, Supply, Installation, Testing & Commissioning of Electric Traction Type fully automatic Machine room less (MRL) 8 Passenger Phyically Handicapped Elevator having SS Enclosure (Grade 304) with AC variable voltage & variable frequency drive unit suitable for operation on 415 +/- 10 % V, 3 Phase, 50 Hz. AC supply, having speed of 1.00 MPS, power operated SS center opening type car & landing doors, electro-magnetic brake system, operating panel with luminous buttons, braille button, inside Car Railing, vertical grab bar, overload warning indicator, battery operated alarm bell, emergency light, Emergency Alarm Button, intercom suitable for hook up to Facility's EPABX, infrared red sensing door protection for full height (min 2100mm height) & mechanical safety by pressure sensor, reverse phase relay on controller, fire man's switch at ground floor, digital car positions indicator in car with up / down direction indications, light fixtures, ventilation fan, Overload Device, landing sill, main beam in shaft for machine, pit ladder, provision of lighting in elevator shaft etc. complete with all accessories serving different floors in the lift shaft along with Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device with or without lever operated (independent of any battery system) with facility as require in Handicapped Lift to follow IS-14665 (Part 4) to complete as required and as per enclosed specifications for each MRL elevator with following characteristics:
-
-
-
... More
i) Elevator Type - Passenger Phyically Handicapped
-
-
-
... More
ii) Capacity- minimum 8 Passenger , 884 Kg
-
-
-
... More
iii) Stops and Openings- 4 Nos
-
-
-
... More
iv) Aproximate Travel- 14.4 meters
-
-
-
... More
v) Travel Speed- 1.0 / 1.1 mps
2
2848000
1424000
... More
Lift Panels-1, 2
-
-
-
... More
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated Bottom entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.
-
-
-
... More
One (1) Incomer - 63 Amp, 25 KA, TP MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB Digital Voltmeter and selector switch
-
-
-
... More
Busbar - 100 Amp Al busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply.
-
-
-
... More
One (1) - Outgoing Feeder with 63 Amp 4P 10KA MCB for lift supply
-
-
-
... More
Three (3) - Outgoing feeder with 32A,2P, 10KA MCB for ARD battery charger, Liftwell lighting & one no. lift Machine Room SPN DB.
2
116800
58400
... More
The bidders are to quote their percentage rates excluding GST. GST will be paid extra. The existing rule of Govt. and any amendment made in future will be followed.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements