Odisha Industrial Infrastructure Development Corporation Tender

Excavation of founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department

Rate for ist depth upto 1.5 meter

Rate for 2nd depth 1.5 meter to 3 meter depth

Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, royalty, loading & unloading as per specification & direction of EIC.

Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.

Providing all materials, labour, T&P for laying of centrifugally cast (Spun) Ductile Iron pressure pipes for water works purpose with socket & spigot ends confirming to IS-8329/2000 with 3rd revision in standard lengths for classification K-9 suitable for push on joints (Rubber Gasket 'D' jointing) with outside zinc coating as per IS-8329/2000 including aligning the pipes inside trench as per IS-12288/1987 including testing the pipe line with required water pressure as per IS-8329/2000 amendment 1st, Sep. 2011 etc. All complete as per specification & direction of EIC (Excluding cost for earth work, jointing of specials, rubber gasket & fittings which shall be paid separately).

500mm dia (NB) S/S pipe K-9 suitable for push-on joint

Providing all labour, T&P and making push-on joint with rubber gasket ring as per IS-5382/1985 1st Revision suitable for D.I pipe and fittings of the following nominal dia including testing of the joints with required water pressure (The cost is inclusive of cost of ring) and all complete as per specification & direction of E.I.C.

Rubber Gasket (EPDM/SBR) suitable for 500mm dia D.I pipes & fittings with ISI mark.

Providing all materials, labour, T&P and laying in trenches following D.I fittings & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. confirming to IS-9523:2000, 1st revision with pressure rating PN-1.0 of following nominal diameter, all complete including test the joints with required water pressure as per specification & direction of EIC. (Excluding cost of earth work in trenches, back filling & rubber gasket)

500mm x 90º D/S Bend

500mm x 45º D/S Bend

500mm x 22.5º D/S Bend

500mm x 11.25º D/S Bend

500 Flanged Socket

500mm Flanged Spigot

600x600x500mm A/F Tee

500x80x500mm D/S with Flange Tee

500mm CI MJ Collar

500mm Blank Flange

500mm Dia 90 Degree MS Bend

600 MJ Collar

Providing, fitting & fixing of following size Ductile Iron valves as per IS 9523/2000 specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C.

500mm dia DI Sluice valve (Non rising spindle) of PN-1.60 as per IS-14846/2000 . (Make:Kirloskar/Vag/Audco)

80mm dia DI Sluice valve (Non rising spindle) of PN-1.60 as per IS-14846/2000. (Make:Kirloskar/Vag/Audco)

80mm dia Kinetic Air Valve without Isolating Sluice Valve As per IS-14845(P.N.-1.6)(Make:Kirloskar/Vag/Audco)

500mm dia double flanged swing type non return valve As per IS-5312(P.N.-1.6)(Make:Kirloskar/Vag/Audco)

250 mm Dia scour valve

Providing all material,labour,required for construction of RCC sluice valve chamber using RCC(M25),PCC ( 1:3:6) with 40mm C.B.granite metals 150mm thick,12mmthick cement plaster (1:3) with cement punning in inner surface of walls,16mm thick cement plaster (1:6) on outer surface of walls,earthwork in excavation,back filling of excavated earth including watering and ramming,125mm thick cover slab with RCC ( M:25) using 20mm & down size C.B.granite chips having minimum cube strength 250 kg/mm² with form work & necessary reinforcement as per approved drawing & design,curing etc including cost of all materials, conveyance, labour, T&P etc.complete as per the direction of EIC.(Excluding GST)

Inner size 1500mm x 1500mm x 1500mm height valve chambers

Construction of RCC M-20 thrust block of following minimum size having minimum cube strength 200Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, alignment & size for all kinds of RCC work with steel centring materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed, PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing etc. all complete as per specification & direction of EIC.

RCC Thrust block of size 1500mm x 1500mm x 1500mm height

Providing all materials, labour T&P for laying of following dia MS pipes with required size of fittings, like off set, bend, tapper etc. as per site condition for water works purpose, including gas cutting by oxygen and acetylene gas flame, fitting and setting as per required size to IS specification and electrodes confirming to IS specification after "V" grove cutting including cost of hire and running charges of welding generator set etc,(The pipes shall be painted with two or more coats of approved anti corrosive Epoxy paint of approved shade ) and aligning the pipes below/ above the ground level as per site condition. Earth work excavation in all kinds of soil/ rock of required depth and width, back filling, dewatering wherever necessary, shoring and shutting etc. for the work The cost inclusive of all , duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables etc. including testing the joint with required water pressure etc all complete as per specification and direction of EIC.

Laying of 508mm dia MS Pipe 8mm thick as per IS:3589 Gr.330 MS pipes (Fe-450 grade) conforming to IS 3589-2001

Providing all materials, labour, T&P for fixing MS flanges suitable for following dia MS pipe including cutting the pipes by oxygen and acetylene gas flames as per the required size and slope and electric welding the same with the pipes as per IS specification including cost for hire and running charges of all machine with POL. (The flanges shall be made out of following thickness plate after cutting as per required size and shape, drilling of bolt holes as per IS specification, painting the same with two or more coats of anti corrosive paint (Epoxy), the cost inclusive of hire & running charges of machineries, POL, To & Fro charges with all consumables, testing of the joints with required water pressure etc. all complete as per specification and direction of EIC.

MS Flange suitable for 500mm dia MS Pipe

Providing all materials, labour, T & P with required machinareis for crossing the connection road lines at required depth by Horizontal Directional Driliing (HDD) method including laying, cutting, welding, testing the 500 & 600mm (NB) dia x 8mm wall thick M.S carrier pipe of required length through 900mm dia precast reinforced concrete pipe suitable for flush joint class NP -3 conforming to IS No - 458/2003. The MS pipe should conforming to IS:3589 Gr.330 with ISI Mark. Providing, fitting & fixing of HDPE spacers between casing & caring pipe @ 2.5 C/C. tHe pipe shall be painted with two or more coats of food grade Epoxy paint 200 mircon both inner & outer surface. The cost inclusive of all duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables etc as per approved, design and drawings etc all complete as per MORTH specification & approval of NH authority& direction of EIC & as per requirment at site in crossing of roads. approx 100 mtrs.

GST will be paid Extra as per Applicable