Odisha Hydro Power Corporation Limited Tender

Removing of cement plaster from walls including racking out joint to 12 mm deep and removing the debris within 50mtr lead and as per direction of Engineer-in-charge.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening an stacking the same at departmental stores for reuse and removing the debris within 50mtr lead and as per direction of Engineer-in-charge.

Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty and labour charges etc.Complete.

16 mm thick cement plaster (1:6) after racking out the joints including watering, curing to required time, cost, conveyance, royalties, cost of all labour with T & P required for the work complete as per direction of Engineer-in-charge.

Providing and Fixing 30cmx30cm special plain/printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to mach the shades of the tiles including rubbing and polishing complete including cost of materials, conveyance, royalty, taxes & cost of labour with T & P required etc complete as per direction of Engineer-in-charge.

Providing & fixing 30cm x 45cm/30cm x 60cm size special plain/printed series edge cut GLAZED TILES (wall tiles) of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. A.15 mm nominal outer dia pipes

B.20 mm nominal outer dia pipes

C. 25 mm nominal outer dia pipes

D. 32 mm nominal outer dia pipes

E. 40 mm nominal outer dia pipes

Fixing of 40mm dia nominal bore CPVC Ball Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per ufacturer’s specification and direction of Engineer -in- charge.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing fitting and fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section No. 9221 tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1885 and 6mm thick plain glass ISI at top half portion and 12mm thick prelaminated novapan board at bottom half portion including all cost of labour, T&P, hire charges of drilling machine etc. complete.

Supply and fixing wash basins of size 550 x 400 mm with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification including cost of 15mm dia CP pillar cock, Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm with PVC waste fittings, Unplasticised P.V.C. connection pipe with brass union 45 cm long 15mm bore, 32mm dia CP Brass waste etc. complete.

Supply and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.

Supplying all materials, labour, T&P and fitting and fixing CP Soap holder with supply of wooden plugs, CP screws and cement etc all complete as per PH specification.

Supplying and Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004/ 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification including cost of Seat and cover, seat cover, 10ltr capacity PVC Low Level flushing cistern with accessories and flush pipe etc. complete.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fitting and fixing standard sized 15mm dia CP Bib cock including supply of all necessary jointing materials including cost, conveyance of all materials to work sites, payment of royalty and taxes etc. all complete.

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes of 110mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes

Fixing standard sized 600x120mm glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium plated brass screw as per specification.

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. A. 110mm dia bend

B. 110x110x110mm single/Double tee with door

Fixing Multi Floor Trap (110mm dia) floor traps with plastic Jali of self cleaning design including cost of cutting and making good the walls and floors all complete as per specification.

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification. A. 250mm thick wall

B. 375mm thick wall

Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.

Supplying all materials, labour, T&P and fitting and Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.

Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification.

Supplying and Fixing 5 Ltr capacity PVC automatic flushing cistern of including cutting holes and making good the same all complete as per specification.

Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges up to 8mtr height.

Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding saging charges with cost of all materials, taxes, labour, T&P etc. complete.

Priming one coat with any approved primer (water based) on Plastered surface after cleaning the surface, sand papering etc. including cost, conveyance, royalties, scaffolding charges, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Wall painting two coats with Plastic emulsion paint of any approved shade over the interior surface of walls including cost, conveyance, royalties, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge.