Odisha Hydro Power Corporation Limited Tender

Supply and filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty and labour charges etc complete

Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty and labour charges etc complete

Cement concrete (1:2:4) to M15 using 12mm grade hard granite chips including lowering, laying concrete, watering and curing to required time etc including cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work etc complete as per direction of Engineer-in-charge

2.5cm AS flooring with CC (1:2:4) including punning using 12mm size HG chips and including cost of materials, conveyance, royalty, taxes an cost of labour with T&P required etc complete as per direction of engineer-in-charge

RCC work of (1:1.5:3) with 12mm and down grade black hard granite chips (crusher broken) including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surface smooth, providing grooves or beds where necessary including cost of all materials (excluding cost of tor steel) and cost of all labour with T&P required as per direction of Engineer-in-charge

Cutting, bending, binding and laying the grill of approved dia and placing in position of tor steel (IS 7686-2000) for RCC works and using binding wire 18 to 20 gauge including cost, conveyance, taxes of all materials and labour complete as per direction of Engineer-in-charge

Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting including cost of materials complete for foundation, plinth band and footings bases of columns mass concrete precast slabs.

Fist class KB brick masonry in cement mortar (1:4) using KB brick having crushing strength not less than 75Kg/Cm2 with dimensional tolerance of +/-8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete as per direction of Engineer-in-charge

16mm thick cement plaster (1:6) after racking out the joints including watering, curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge

20mm thick cement plaster (1:4) in finished smooth to inside / outside rough surface of walls after racking out the joints including watering curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete etc as per direction of Engineer-in-charge

Supplying, fitting, and fixing vitrified tile in floors of size 600mm x 600mm coloured / printed series (Homogeneous) confirming to IS 13755 with application of polymer modified quick set cement base water resistant adhesive confirming to IS:15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-charge

Providing and fixing 30cm x 45cm size special plain / printed series edge cut glazed tiles (wall tiles) of premium grade having thickness 6.5mm to 6.7mm conforming to IS:13753 of approved made and shade in dadoes over 12mm thick cement plaster 1:3 (1cement :3 coarse sand) finished with modular pointing in white cement and pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T&P etc required for the work etc complete as per specification and direction of Engineer-in-charge

Providing and fixing PVC door frame of size 50x47mm with a wall thickness of 5mm (± 0.2mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 Nos. of PVC bracket of size 190mm x 100 long arms of cross section size 35x15mm and self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm MS rectangular tube of 0.8mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of he profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer-in-charge

35mm thick factory made Solid panel PVC door shutter, made out of single piece extruded solid PVC profiles, 5mm (±0.2mm) thick having styles and rails (except lock rail) of size 95mm x 35mm x 5mm, out of which 75mm shall be flat and 20mm shall be tapered (on both side), having one side thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40mm x 20mm x 1mm joints of styles and rails to be mitered cut and joint with the help of PVC solvent cement, self driven self tapping screws and MS rectangular pipes bracket of size 190mm x 100mm of cross section size 35mm x 17mm x 1mm at each corner. Single piece extruded 5mm thick solid PVC lock rail of size 115mm x 35mm x 35mm, out of which 95mm to be flat and 20mm to be tapered at both ends, having 15mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125mm x 11mm, including providing 5mm single piece solid PVC extruded sheet inserted in the door as panel all complete as per manufacturer's specification and direction of Engineer-in-charge.

Fixing water closet, squatting pan (India type WC pane), foot rest, P trap conforming to IS 2556: Part-3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete

Supplying all materials, labour, T&P and fitting and fixing 560x455mm size hand wash basin of Parryware make or equivalent of Hindware / Jaquar/ Cera make, 32mm dia CP bottle trap of Parryware make having cat No. T3614A1, connecting hose 2' cat No. T991999 with CP basin mixer cat No. T3614A1 of Parryware make or equivalent of Hindware / Jaquar/ Cera make to be approved by the Engineer-in-charge all complete as per PH specification

Supplying all materials, labour, T&P and fitting and fixing standard sized 15mm dia Pillar cock of Parryware make or equivalent of Hindware / Jaguar / Cera make to be approved by the Engineer-in-charge including supply of all necessary jointing materials including cost, conveyance of all materials to work sites, payment of royalty and taxes etc all complete

Supplying all materials, labour, T&P and fitting and fixing fixed type bevelled edge plate glass mirror of parryware make (60x45cm) or equivalent of Hindware / Jaquar / Cera make to be approved by the Engineer-in-charge with supply of wooden plugs, CP screws and cement etc all complete as per PH specification

Supplying all materials, labour, T&P and fitting and fixing CP brass Towel rail 24" size with CP brackets of Parryware make having cat No. T6001A1 or equivalent of Hindware/Jaquar/Cera make to be approved by the Engineer-in-charge with supply of wooden plug, CP screws etc all complete including polishing as per PH specification

Supplying all materials, labour, T&P and fitting and fixing Soap holder of Parryware make or equivalent of Hindware / Jaquar make to be approved by the Engineer-in-charge with supply of wooden plugs, CP screws and cement etc all complete as per PH specification

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular stop cock Parryware or equivalent of Hindware / Cera make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and fitting and fixing standard sized 15mm dia to way CP Bib cock of Parryware make with slim line health faucet with hose and hook having or equivalent of Hindware / Jaguar / cera make to be approved by the Engineer-in-charge including supply of all necessary jointing materials including cost, conveyance of all materials to work sites, payment of royalty and taxes etc all complete

Supplying all materials, labour, T&P and fitting and fixing standard size 15mm dia Bib cock with wall flange of Parryware make or equivalent of Hindware / Jaguar / Cera make to be approved by the Engineer-in-charge including supply of all necessary jointing materials including cost, conveyance of all materials to work sites, payment of royalty and taxes etc all complete

Supplying all materials, labour, T&P and fitting and fixing standard sized 15mm dia concealed CP stop cock of Parryware make of equivalent of Hindware / Jaguar / Cera make to be approved by the Engineer-in-charge including supply of all necessary jointing materials including cost, conveyance of all materials to work sites, payment of royalty and taxes etc all complete

Fixing 15mm dia CP overhead rain shower of Parryware make with long shower arm 24" of Parryware make or equivalent of Hindware / Jaguar / Cera make to be approved by the Engineer-in-charge including polishing all complete as per specification

Miscellaneous work (UPVC louvered ventilators)

Priming one coat with any approved primer (water based) on Plastered after cleaning the surface, sand papering etc including cost, conveyance, royalties, taxes of all materials cost all labour with T&P required for the work complete as per direction of Engineer-in-charge

Wall painting two coats with weather seal coat paint of any approved shade over the exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T&P required for the work complete as per direction of Engineer-in-charge

Providing and fixing to wall or ceiling and floor PVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete

15mm diameter

20mm diameter

Providing and fixing on wall face unplasticised rigid PVC soil, waste and rain water pipes conforming to IS:13592 type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion (i) single socketed pipes

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion

110mm dia bend

Single tee with door

Iron work wrought and put up in trusses and record racks

Hoisting joists and trusses and placing in position (Labour only)

Providing and fixing GCI sheet in roof drilling hole in wind ties including fixing of ridges, valleys, wind ties etc excluding cost of fittings