Odisha Hydro Power Corporation Limited Tender

Earth work excavation for plinth & foundation in hard soil or gravelly soil within 50 mtrs. initial lead and 1.5 mtrs initial lift and 1.50 mtr extra lift over initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.30 mtrs in depth as per direction of Engineer-in-charge.

Supply & filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty and labour charges etc. complete.

Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty and labour charges etc.Complete.

R.C.C. work of ( 1:1.5:3) with 12 mm & down grade black hard granite chips( crusher broken) including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surface smooth, providing grooves or beds where necessary including cost of all materials (excluding cost of tor steel) and cost of all labour with T & P required as per direction of Engineer-in-charge.

Supplying, cutting, bending, binding and laying the grill of approved dia and placing in position of tor steel (Fe-500) for R.C.C. works and using binding wire 18 to 20 gauge including cost, conveyance and labour complete as per direction of Engineer-in-charge.

Rigid and smooth centering and shuttering for R C C works including false works and dismantling them after casting including cost of material complete. a) For foundation, plinth band and footings bases of columns mass concrete precast slabs.

b)For RCC Beams, columns

c)For RCC floor, roof slabs, landing, balconies, projecting sunshades, chajjas

d)For RCC Lintel

First Class Fly Ash brick masonry in cement mortar (1:6) using Fly Ash brick in super structure having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc. including cost, converyance, royalties and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge.

16 mm thick cement plaster (1:6) after racking out the joints including watering, curing to required time, cost, conveyance, royalties, cost of all labour with T & P required for the work complete as per direction of Engineer-in-charge.

6 mm thick cement plaster (1:4) to RCC surface finished smooth including closed deep chipping and slury treatment including watering, curing to required time, cost, conveyance, royalties, cost of all labour with T & P required for the work complete as per direction of Engineer-in-charge.

2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips admixed with waterproofing compound including cost, conveyance, royalties, taxes of all materials, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge.

Supplying, fitting and fixing Mat Finish vitrified tile of premium grade in floors of size 600mm x 1200mm of Kajaria/ Somani/Jhonson & Jhonson/AGL or equivalent make confirming to IS : 15622:2006 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-charge.

Fixing granite tiles of minimum 20mm thick above 0.40 sqm in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to mach the shades of the tiles including rubbing and polishing, forming nose complete. including cost of materials, conveyance, royalty, cost of labour with T & P required etc complete as per direction of Engineer-in-charge.

Providing & fixing 30cm x 60cm size special plain/printed series edge cut GLAZED TILES (wall tiles) of premium grade of Kajaria power line / Somany Digital N Glosstra / Asian impression / Johnson /RAK/Orient Bell or equivalent having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.

Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges up to 5 mtr height.

Finishing wall surface with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials, labour, T&P etc. complete.

Priming one coat with any approved primer (water based) on Plastered surface after cleaning the surface, sand papering etc. including cost, conveyance, royalties, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Wall painting two coats with Plastic emulsion paint of any approved shade over the interior surface of walls including cost, conveyance, royalties, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge

Wall painting two coats with Weather seal coat Paint of any approved shade over the Exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge

Priming one coat with any approved primer on Iron/ wood work including cost, conveyance, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Painting two coats any approved shade of paint on iron/wood work including cost, conveyance, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Fabricated iron works including cost of all materials, labour charges, cess etc. complete.

Supplying and fixing Pre-painted GCI sheet of 0.62mm thick in roof drilling hole in wind ties including fixing of ridges, valleys, wind ties etc. including cost of all materials, T&P, labour charges etc. complete

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 9.147D.1 Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing fitting and fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section No. 9221 tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1885 and 6mm thick plain glass ISI at top half portion and 12mm thick prelaminated novapan board at bottom half portion including all cost of labour, T&P, hire charges of drilling machine etc. complete.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’ , bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC. value of 0.50(Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043 w/m 0 KC.

Supply & Fixing 1000 litre capacity triple layer white Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 of Sintex/Oriplast/Suprime/ Plasto/Aquaplast or equivalent make including cutting holes through the tank and fixing mild steel / UPVC tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer-in-charge.

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of Oriplast/Plasto/ Suprime/ Finolex/ Aquaplast or equivalent make of 25mm nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.

Supply & Fixing of 25 mm dia UPVC Ball Valve conforming to SCH 80 as per ASTM D 2467 complete.

Supply and fixing wash basins of size 550 x 500 x 175 mm with pedestal conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification including cost of 15mm dia CP pillar cock, Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm with PVC waste fittings, Unplasticised P.V.C. connection pipe with brass union 45 cm long 15mm bore, 32mm dia CP Brass waste etc. complete.

Supply and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.

Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium plated brass screw as per specification.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty, all other taxes and labour charges etc.Complete.

Supply and fixing of glow sign board having box size 6' x 3' x 8" made of 1 mm thick G.P. sheet having 6 nos LED tube light, acrylic sheet and stickering of Letter and Logo etc. as per direction of E.I.C.