Odisha Hydro Power Corporation Limited Tender

Close deep chipping and cleaning to R.C.C. surface for receiving cement plaster or cement concrete including all labour, T&P, sundries and labour cess etc complete in ground floor & 1st floor.

Dismantling and removing doors & windows and ventilators including removal of frames,hinges, fastenings and stacking the same for reuse & removing the debries within 50m lead including all labour, T&P, sundries & labour cess etc complete in ground floor & 1st floor.

Dismantling G.C.I or A.C sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50.00 mtr lead including all cost of labour, T &P, sundries, scaffolding and labour cess etc complete.

Dismantling and removing Aluminium doors including removal of frames,hinges, fastenings and and refixing the same in position after necessary repair woks by cutting the frames, fitting and fixing etc including supplying of required screws, two nos 150 mm aluminium handles, one number of 300 mm x 130 mm x 4 mm aluminium aldrop & three numbers of 125 mm x 63 x 4 mm size aluminium hinges etc complete & removing the debries within 50m lead including all labour, T&P, sundries & labour cess etc complete in ground floor & 1st floor.

Scraping old paint with scapers, sand paper & wasing with soap water or soda including scafollding upto 5.00m height including all cost of labour, T&P, sundries, & labour cess etc complete.

Supplying, fitting & fixing of granite tiles of size minimum above 0.40 sqm. 20mm thick of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P, sundries, curing and labour cess etc complete in ground floor and 1st floor.

Providing and fixing Granite tiles above 0.10 Sqm & upto 0.40 Sqm (10 mm thick) in dados skirting, walls and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbining and polishing complete including cost, conveyance, royalty, all labour, T & P, sundries, lead, lift, delift, labour cess and curing etc complete in ground floor and 1st floor.

Providing and fixing 30cm x 30cm / 40cm x 40cm special plain / printed series ceramic antiskid floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 in floors, treads or steps and landings on 25 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles, all labour, T & P, sundries, all other materials, conveyance, royalty, lead, lift, delift, labour cess and curing etc complete in ground floor and 1st floor.

Providing fitting and fixing up partition walling aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and section 4660 as Tapered clip and jointing angle No 1855 and 8 mm thick surface finish eco board etc. complete as per the direction of Engineer-in-charge.

Providing suspended ceiling which includes G.I.perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling ,screw fixed to brick wall/partition with the help of nylon sleeves and screws,at 610 mm centres. Then suspending G.I.intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the sofit at 1220 mm centres with ceiling angle of width 25mmx10mmx0.55mm thick fixed to sofit with G.I. cleat and steel expansion fastners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centres. 12.5mm tapered edge Gypboard(conforming to IS:2095- 1982)is then screw fixed to ceiling section with 25mm dry wall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment and the celing surface is applied with putty for smooth finishincluding one coat of acrylic wall putty and two coats of acrylic emulsion paint etc complete including all cost of materials, labour, T & P, sundries, scaffolding, lead, lift, delift and labour cess etc complete in ground floor and 1st floor.

Supplying and fixing false cealing with anodied T section no-3215 with 2'00" center to center, L section No-1705 upto 15 micron on 4 walls to be fixed by means of steel screws and PVC plug and the Aluminium grid 2'00" x 2'00" with birla Aerocron ceiling board 4 mm thick suspended from ceiling with frame and all fitting materials including all cost of material , labour T&P, sundries, scaffolding, lead, lift, delift & labour cess etc complete in ground floor and 1st floor.

Supplying, fitting and fixing aluminium windows (sliding type) made up of aluminum section No - 9778 as window frame, section No - 4595 & 4096 and 9777, 9994 as shutter frame with 5mm thick black/ white gold plus plain glass as panel fitted with rubber beading including locking management including all fittings, cost of all materials, cost of all labour, T&P, sundries, & labour cess etc complete in ground floor and 1stt floor.

Providing , fitting, & fixing of single leaf Aluminium door shutter with top half portion 5 mm thick plain glass and bottom half portion with 4 mm thick aluminium sheet & with anotized AL.door section of -9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with taper clips No-4660 and the frame to be completed by means of jointing angle No-1855 including cost of 2 nos 30 cm long aluminium aldrops, 1 no of door stopper, 2 nos of 15 cm long aluminium door handle, 1 nos of Gorej door closers, 3 nos of 125 mm long aluminium hinges, 2 nos of 200 mm x 10 mm aluminium tower bolts , labour T&P, sundries, & labour cess, hire charges of drill machine, cost of 5 mm thick Gold plus plain glass & 8 mm thick surface finish eco board etc complete.

Dismantling squatting type water closet and urinal plates and mending good the damages to the floor etc including all labour, T &P, sundries and removing the debris within 50 mtr lead etc complete in ground floor and 1st floor.

Providing & fixing wash down water closet ( European type W.C pan Hind ware /Parry ware floor mounted white ) with integral 'S' or 'P' trap confirming to IS 2556 : Part 8 - 2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of European pan, 'S' or 'P' trap , all labour, T & P, sundries, cement, sand and labour cess etc complete in ground floor and 1st floor.

Providing and fixing plastic seat and seat cover of Hind ware / Parry ware make for wash down water closet with chromium plated brass hinges and rubber buffers all complete including cost of seat and seat cover, all labour, T & P, sundries and labour cess etc complete in ground floor and 1st floor.

Providing and fixing P.V.C low level flushing cistern of Hind ware / Parry ware make with manually controlled handle lever confirming to IS : 7231, with all fittings and fixtures etc complete including all labour, T & P, sundries and labour cess etc complete.

Providing and fixing Cera F 8030103 Health faucet ABS body with 8 mm dia, 1.00 mtr long flexible tube & wall hook including all labour, T & P, sundries and labour cess etc complete.

Providing and fixing 15 mm dia jaquar / Hind ware make two way bib cock including all labour, T & P, sundries and labour cess etc complete.

Providing and fixing glazed earthen ware squatting plate of size 600 mm x 350 mm confirming to IS : 2556 - Part -6 1995 with integral longitudinal flushing pipe including embedding the plate in 25 mm cement mortar (1:8) laid over 150 mm cement concrete (1:4:8) using 40 mm hard granite crusher broken metal including cost, conveyance, royalties, lead, lift, delift, all labour, T & P, sundries and labour cess etc complete in ground floor and 1st floor.

Providing & fixing 49 cm dia counter top wash hand basin (special) of hind ware make having cat No 10052 of round starlet or equivalent of parry ware / Jaquar make with a pair of C.I bracket 32 mm dia C.P bottle trap of Jaquar make cat No ALD - 769, connection pipe with C.P nut bolt 450 mm long of cat No ALD 803 B , 15 mm dia pillar cock Jaquar make having cat No - KUB - 35001 or equivalent of parry ware / Hind ware including cutting walls and making good the damages in C.C (1:2:4) as per specification all complete including cost of all materials ,labour, T & P, sundries, curing and labour cess etc complete in ground floor and 1st floor.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass / Belgium glass mounted on 6mm thick ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete including all cost labour, T&P sundries & labour cess etc complete.

Providing & fixing 600 mm x 125 mm size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws including all materials, labour, T & P , sundries, labour cess etc complete in ground floor and 1st floor.

Providing and fixing of towel rail of jaquar make AKB -35711 or equivalent parry ware / Hind ware including cost of all materials, all labour, T & P, sundries and labour cess etc complete in ground floor and 1st floor.

Supplying all materials, labour, T & P and fixing C.P soap dish of prestige premium stain less steel / holder complete with C.P brass brackets fixed to wooden plugs with C.P screws and labour cess etc complete in ground floor and 1st floor.

Providing and fixing standard sized 15 mm dia angular stop cock of Jaquar Kubix Cat No KUB - 35053 or equivalent of Parry ware / Hind ware make complete including cutting the wall and making good the damages including cost of all materials, all labour, T 8 P, sundries and labour cess etc complete in ground floor and 1st floor.

Providing & fixing to wall or ceiling and floor upvc pipes class confirming to ASTM - D 1785 / 89 (Sch - 80) and pipe fittings including different size unions of the following nominal bore with clamps including making good the wall, ceiling and floor, testing all complete including all labour, T & P, sundries, lead, lift, delift and labour cess etc complete in ground floor & 1st floor.

15 mm dia Upvc pipe sch - 80.

25 mm dia Upvc pipe.

Providing and fixing liquid soap container with chromium plated brass lid and bracket fixed to wooden plugs with chromium plated brass screws or complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws etc complete including cost of liquid soap container, screws, brackets, all labour, T & P, sundries and labour cess etc complete in ground floor and 1st floor.

Providing and fixing of 25 mm dia Zoloto Gun metal full way valve with wheel including cost of valve, all materials, labour, T & P, sundries and labour cess etc complete in ground floor and 1st floor.

Providing and fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings etc complete including cost of pedestal, all labour, T &P, Sundries, lead, lift, delift and labour cess etc complete.

16mm thick cement plaster in cement mortar (1:6) over brick or stone masonary including cost, conveyance, royalty, lead, lift, delift, all labour, T&P, sundries, labour cess and curing etc complete in ground floor and 1st floor.

Providing and finishing wall surface with acrylic wall putty / cement based wall putty of approved shade of Asian/ Burger/ Shalimar make and finished smooth and even surface to receive painting including cost of paint scafFolding charges labour , T&P sundries, labour cess etc complete in ground floor & 1st floor.

Priming one coat to walls with wall cement primer (ISI) including cost of primer water bound, all labour, T&P, sundries, brush, scaffolding, labour cess, putty etc complete in 1st Floor & ground Floor.

Providing and painting two coats to walls with royale luxury emulsion paint of Asian / Burger/ Shalimar make of approved quality and approved shade in all floors @ all height including cost of paint, all labour, T&P, sundries, brush, scaffolding, lead, lift, delift and labour cess etc complete in ground floor and 1st floor.

Providing, fitting and fixing in position 20 mm thick single leaved W.P.C door shutter including cost of door shutter, all hard ware fittings like one number of wooden hinged cleats, Two numbers of ISI chromium plated handles 125 mm x 175 mm x 32 mm, Two numbrer ISI aluminium tower bolts 200mm x10 mm, three numbers of ISI aluminium butt hinges 125 mm x 75 mm x 4 mm, Two numbers of ISI aluminium Aldrops of size 300 mm x 16 mm, one number of door stopper and all types of required screws etc complete including all labour, T & P, sundries, labour cess etc complete. (Cost of materials as per local market).

Providing and fixing 30mm thick factory made PVC rigid foam panelled door shutter with frame manufactured by M/S Rajashree / Krishna /sintex for equivalent made from M/s tube of 19 gauge thickness, size 19*19mm for styles & 15*15mm for top & bottom rails, covered with heat muolded PVC "c" channel 0f 5mm thick sheet an 30*50mm wide to foam styles and 5mm thick & 75mm wide PVC sheets for top rails and bottom rail and on otherside and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5mm thick PVC sheet fitted in M.S frames welded/ sealed to the styles and rail with 5*30mm PVC sheet beading on either side and jointed together with solvent cement adhesive etc complete or per manufatures specification including fixing frames with 4nos M.S Powder coated butt hinges complete including one 10 inch aluminium aldrop and two aluminium tower bolt of 10 inch and 6inch and aluminium handles all cost, conveyance, laoding, unlaoding, all labour, T&P sundries, and labour cess etc complete in ground floor and 1st floor.

Godrej Alice pro Cofee Table 45cm x 100cm x 65 cm.

Providing Coffe Table Allice model of Brand Godrej interio Alice wall nut glass coffee table or equivalent make.Dimensions H 45 cm x W 100 cm x D 65cm. (Primary material tempered Glass & Engineered wood) as per direction of E.I.C. As per market rate. Unit = Per Number. ( As per market rate).

Godrej Alice pro Cofee Table 45cm x 100cm x 65 cm.

Providing & fixing Godrej interio Cabro sofa set leatherate 3 +1 +1 ( 1 No three seated + 2 Nos one seated) three seater : H 650mm x W 200cm XD 82 cm Weihgt - 59 Kg. One seater : H 650 mm x W 83 mm Xd 82 CM, Weight - 27 Kg or equivalent make as per direction of E.I.C. (As per market rate). Unit = Per set.

Godrej interio Cabro sofa set leatherate.