Odisha Hydro Power Corporation Limited Tender

Supply & filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty, all other taxes and labour charges etc. complete. & as per direction of Engineer-in-charge.

Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty, all other taxes and labour charges etc. complete. & as per direction of Engineer-in-charge.

Cement concrete (1:2:4) to M 15 using 12 mm grade hard granite chips including lowering, laying concrete, watering and curing to required time etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge.

Cement concrete (1:1.5:3) with 12 mm & down grade black hard granite chips (crusher broken) for R.C.C. works including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth, providing grooves or beds where necessary including cost of all materials (excluding cost of tor steel) and cost of all labour with T & P required as per direction of Engineer-in-charge. (To be used for minor repair work only)

Supplying, fitting and placing uncoated HYSD bar reinforcement including cost, conveyance, taxes of all materials and labour complete as per direction of Engineer-in-charge.

Rigid and smooth centring and shuttering for R C C works including false works and dismantling them after casting including cost of material complete for foundation, plinth band and footings bases of columns mass concrete precast slabs as per direction of Engineer-in-charge.

Brick masonry in cement mortar (1:4) using Fly Ash Brick 25cm ×12cm x 8cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using in foundation & plinth including hoisting, placing in position, scaffolding splays, cutting circular moulding and curbelling, champering and similar such type of work, watering, curing to required time etc. including cost, conveyance, royalties and taxes of all materials and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge.

16 mm thick cement plaster (1:6) in finished smooth to inside/outside rough surface of walls after racking out the joints including watering, curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work complete etc. as per direction of Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:

White Cement washing one coat over the interior/exterior surface of walls including cost, conveyance, taxes of all materials, cost of labour with T & P required for the work complete etc. as per direction of Engineer-in-charge.

Finishing Interior/Exterior wall surface with acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding sagging charges with cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer-in-charge.

Priming one coat with any approved primer on Plastered surface after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Wall painting two coats with Plastic emulsion paint of any approved shade over the interior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge.

Wall painting two coats with Weather seal coat Paint of any approved shade over the Exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge.

Providing and laying CERAMIC TILES of any approved make & shade in flooring on a bed of 25mm thick cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slurry mixed with pigment to mach the shades of the tiles including rubbing and polishing complete. including cost of materials, conveyance, royalty, taxes & cost of labour with T & P required etc complete as per direction of Engineer-in-charge.

Fixing GLAZED CERAMIC TILES in walls of any approved make & shade on 12mm thick bed of cement mortar 1:3 jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete. including cost of materials, conveyance, royalty, taxes & cost of labour with T & P required etc complete as per direction of Engineer-in-charge

Providing and laying CHEQURED TILES of any approved make and shade on a bed of 25mm thick cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of materials, conveyance, royalty, taxes & cost of labour with T & P required etc complete as per direction of Engineer-in-charge.

Supplying, fitting and fixing VETRIFIED TILES in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per direction of Engineer-in-charge. (for new work only)

Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701 -- 1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meter above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer-In-Charge.

Supplying all materials, labour, T&P and fitting and fixing of UPVC Ball Valve 20mm dia (SCH 80) Ashirvad make or Equivalent conforming to IS 1703-1977 complete as per specification and direction of the Engineer in charge

Supplying all materials, labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar (1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification as per direction of Engineer-in-charge.

Supplying all materials, labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification as per direction of Engineer-in-charge.

Supplying all materials, labour and T&P and fixing to walls, ceiling and floor un-plasticized PVC pipes conforming to [ASTM-D-1785/89, Sch-80.], following diameter with fittings and clamps including testing as per specification all complete as per direction of Engineer-in-charge.

20mm diameter

15mm diameter

Fixing pillar taps capstan head screw down high pressure with long screws, shanks and back nuts of the following nominal bore as per specification as per direction of Engineer-in-charge.

15mm Long Body Bib cock

15mm Bib cock 2 in 1(Hindware Classik Cat. No.: F200004)

15mm Angular Stop cock (Hindware Classik Cat. No.: F200004)

15mm Pillar cock, Foam Flow (Hindware Classik Cat. No.: F200001)

15mm Sink Cock (Hindware Classik Cat. No.: F200024)

15mm Concealed Stop Cock with Adjustable wall flange for Shower (Hindware Classik Cat. No.: F200007)

Supplying all materials, labour, T&P and fitting and fixing 15mm dia CP Health Faucet Hindware make F160027 or Equivalent with 15mm or 20mm inlet including polishing all complete as per specification as per direction of Engineer-in-charge.

Fixing 15mm dia 2 ft long PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification as per direction of Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity PVC low level flushing cistern (Hindware Sleek Smart Starwhite) or Equivalent with 32mm dia flush bend and manually control device (Handle lever) conforming ti IS:7231 with all fittings and features etc all complete as per specification as per direction of Engineer-in-charge.

Fixing water closet, squatting pan (Indian type W.C pan) with embeded footrest of (Hindware make Orissa Pan Popular (white) Cat. No.:20043, 51x41cms size or Equivalent conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification as per direction of Engineer-in-charge.

Fixing 100mm size 'P' trap (with horn or without horn) for water closet squatting pan & Nahini Trap for floor & wash basin including jointing the trap with pan in cement mortar (1:1) as per specification & Fixing 100mm size Nahini Trap for floor & wash basin including jointing the trap with jally in cement mortar (1:1) as per specification as per direction of Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and Fixing wash basins Hindware Make full pedestal basin (Ariel model, Cat. No. 10100) Size 55x 40 x 79Cm Star White or Equivalent with hole for pillar taps conforming to IS 2556: Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification as per direction of Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and Fixing pedestal for wash basin Hindware Make full pedestal basin (Ariel model, Cat. No. 10100) Size 55x 40 x 79Cm Star White, Pedestal Category 11003 or Equivalent complete recessed at the back for the reception of pipes and fittings as per direction of Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required as per direction of Engineer-in-charge.

Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification as per direction of Engineer-in-charge.

Fixing Chromium Plated Brass Shower rose Hindware Make Single flow rain showers (Cat. No. F160039) or Equivalent with 15mm or 20mm inlet including polishing all complete as per specification as per direction of Engineer-in-charge.

Fixing Chromium Plated brass waste coupling Hindware Make Waste Coupling (Cat. No. F850002) or Equivalent of the 32mm nominal diameter for wash basin and sink as per specification as per direction of Engineer-in-charge.

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes Ashirvad make or Equivalent conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, having 10 mm gap for thermal expansion, (i) 110 mm Dia Single socketed pipes as per direction of Engineer-in-charge.

Providing and fixing on wall face un-plasticised-PVC moulded fittings / accessories for un-plasticised Rigid PVC rain water pipes Ashirbad make or Equivalent conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, having 10 mm gap for thermal expansion as per direction of Engineer-in-charge.

Door Tee 110mm dia

Door Tee 110mm dia

Door bemd 110mm dia

Vent Cowl 110mm dia

Plain Bend 110mm dia

Round Jali For Nahini Trap

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19-gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing factory-made panel PVC door shutter consisting of frame made out of M.S. tubes of 19-gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm and as per direction of Engineer-in-charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. . 35 mm thick.

Supplying, fitting, fixing up window (sliding type) made up powder coated aluminium Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 6mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-Charge.

Manufacturing & supply of double leaved MS Compound wall gate at Head Regulator with moulded hinges etc. of approved design. Including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Labour for fitting and fixing of M.S. Gates as per approved design including cost of all materials complete as per direction of Engineer-in-charge.

Priming one coat with any approved primer on Iron work after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Painting two coats any approved shade of paint on new iron/wood work after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Floor painting two coats with Floor paint (Kamadhenu/ Indigo or equivalent) of any approved shade on the top surface of floor including cost, conveyance, royalties, taxes of all materials, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge.