Odisha Bridge And Construction Corporation Limited Tender

3CX4 Sqmm CU Cable

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required.

3.5C X 25 sqmm Al A2XFY armoured AL Cable

3CX4 Sqmm CU Cable

Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required

Upto 35 Sq. mm

Earthing with G.l, earth pipe 4.5 metre long, 40 mm die including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal coke and salt as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry

Providing and fixing testing joint, made of G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer sapced at 50mm).

Supplying and laying 25 mm X 5/6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part -II suitable for drawing underground cables. 63mm OD / 51mm ID

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.(Make :SYSTEMATIC OR EQUIVALENT)

Supply of 16 Mtr Height High Mast Lighting Structure with all accessories, three suspension type in two Section @10300 mm, Top - 150 mm x 3 mm thick, Bottom - 360 mm x 4 mm Thick, Base Plate - 540 mm x 25 mm, Lantern Carriage Suitable for 12 nos of 350 LED Watt Flood Light Fitting, Foundation Bolt - M30 × 850 mm. (6 Nos) with anchor plate & template, Trailing Rubber Cable (2.5 Sq mm 5 Core), 6 mm SS Wire rope, 1.5 HP Motor with Double Drum winch and hardwares.

Supply of 350 Watt LED Flood Light Fitting

Supply of Aviation Lamp with Stand

Civil Work Cost Including all accessories

Supply, erection testing & commission of 7 mtr. high Architectual decorative cast Iron single arm (For mounting of suspension type LED decorative light fitting) poles welded with mid steel base olate of size 450mm450mm * 15mm thickness. A service window is provided in the bottom part of the pole to accorodate a 3 phase loop in and loop out junction box with 4nos 20x3mm Aluminum Dus bar, 1 no BA/10A SPMCB 10KA rating and 30amp connector for termination of 4c x 16mm? Ar. Al PVC cable as lIC and 1 no 3c x 2. 5m° 650/1100 Volt grade fexible copper cable, PVC insulated and sheathed conforming to IS.6944 to the light fitings at the top of the pole. A Mild steel tube should run through the cast lon pole and should be weided to the bottom base plate for giving required yield strength to withstad the wind pressure of 172km/hr and the wind pressure stability calculation shouid be done as per IS:875. The decorative bracket made out of cast iron MS/GI pipe & rod. The M. S/G.I pipe, rod & cast iron embellishments are joined together by means of welded joints & fabricated to get the desire design as per attached drawing. The decorative bracke its should have the arrangment to fix the required luminaire. One decorative bracket shall be fitted at the top of the pole. The pole and the bracket shall be duly pretreated by shot blasting process and painted with two coats of eproxy primer and two coat of exterior grade Poly-Urethane Paint in approved colour shade. The coating on the pole and bracket shall have minimum 90 microns All respect should be completed including Civil Works.

Supply of 100 Watt LED Flood Light Fitting

Liasoining with TPCODL/DISCOM with deposit of service connection charges for 53 nos. Highmast and 2 nos. for