National Institute Of Technology Tender

Distempering with 1st quality acrylic distemper (readymade) of approved manufacture and of required shade and colour complete, as per manufacturer's specification. New Work( Two or more coats )

Applying one coat of cement primer of approved brand and manufactureron wall surface

Painting with aluminium enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Brick work with F.P.S bricks of class designation 75 in Super structure above plinth levell upto V floor level in all shapes and size in Cement mortar 1:6 (1cement: 6 sand) complete in all respect as per direction of Engineer in charge

Providing and laying in position Reinforced cement concrete of specified grade excluding the cost of centering and shuttering. Cement concrete in 1:2:4 (1 Cement : 2 sand:4 Coarse Aggregate 20mm Down) complete in all respect as per direction of Engineer in charge Upto plinth level

Kota stone slab flooring over 20mm average thick base laid and joined with greycement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 sand) 25mm thick

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Cement concrete in 1:4:8 (1 Cement : 4 sand:8 Coarse Aggregate 40mm Down)

Dismantling R.C.C. work, including stacking of steel bars and disposal of unservicable amterials within 50mtr lead as per direction of Engineer incharge.

Demolishing brickwork manually/ by mechanical means including stacking of servicable materials and disposal of unservicable materials with in 50mtr lead as per direction of Engineer in Charge

Dismantling doors windows and clearstorey windows (steelor wood shutter )including chowkaths architrave holdfasts etc. complete and stacking within 50mtr lead"

Demolishing cement concrete manually/ by mechanical means including disposal of materials with in 50mtr lead as per direction of Engineer inCharge.

Providing and fixing at all heightfalse ceiling including providing and fixing of frame work mae of special sections power pressed from M.S sheet and galvanised in accordance with zinc coating of grade 350 as per IS 277and consisting of angle cleats of size 25mm widex1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener12.5mm dia x40mm long with 6mm bolts to the angle hangerof 25x25x0.55mm of required length, and other end of angle hanger being fixed withnut and bolts to G.I channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a directionperpendicular to G.I channel with connecting clips made out of 2.64mm dia 130mm long G.I wire at every junction including fixing the gypsum board with ceiling section and perimeter channels of 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to walls/ partition with the help of rawl plug at 450mm centre to centre with 25mm long drive all screw @230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufacturer specification and also including the cost of making opening for light fittings and grills, diffusers, cutouts made of frame of perimeter channels suitably fixed all complete as per drawing and specification and diretion of Engineer in Charge but excluding the cost of painting with: 12.54mm thick tapered edge gypsum board conforming to IS 2095-Part-I

Steel work welded in built upsection/ framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required below in grating frames guard bar ladder railings brackets gates and similar works

Providing and fixing aluminium work Fully glazed with 5mm thick glass pane for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene fillet etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (all fittings such as hinges handle and beading etc all are included and measured in Sq.M) ((((DOOR : V:85x44.45x1.8@1.301 kg/mt, Top: 114.30x44.45x1.35@1.139Kg/mt, Bottom 114.30x44.45x1.49@1.19 Kg/mtr, middle: 100x44.45x2.0@1.603Kg/mtr)))) For shutters of doors , windows & ventilators including providing and fixing of hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required

Providing and fixing of glazing in aluminium/ Wooden/ UPVC door window ventilator shutters and partition etc with PVC /neoprene gaskets etc complete as per architectural drawing and the direction of te Engineer in Charge with teak wood lipping etc compl;ete for fixing in position with wall partition etc complete With float glass panes of 4.0mm thickness

Dismantling tile work in floors laid in cement mortar including stacking materials within 50mtr lead For thickness of tile above 10mm and upto 25mm

SHUTTERING & CENTERING Suspended floors roofs landings balconies and access platform

Providing and placing reinforcement for R.C.C. work including straightining cutting bending placing in position and binding allcomplete. Upto plinth level and above plinth level Thermo Mechanically Treated Bars

Providing and fixing of 18mm thick gang saw cut mirror polished (pre moulded and pre polished ) machine cut for kitchen platform vanity counters window sill facials and similar location of trequired size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 with joints treated with white cement mixed with matching pigment epoxy touch ups including rubbingcuring moulding and polishing to edges to give high gloss finish etc complete at all levels Grinite of any colour mirror polished and machine cut edge area of slab over 0.5Sq.M

Extra for providinh edge moulding to 18mm thick marble stone counters vanities etc including machine polishing to edge to give high gloss finish etc complete as per direction of Engineer in Charge Grinite work

Providing and fixing of Stainless steel AISI304 (18/8) kitchen sink as per IS 13983 with C.I brackets, CP brass chain with stainless steel plug, 40mm CP brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: including clamps and fixtures complete as per direction of Engineer in charge Kitchen sink without drain board 610x460 mm bowl depth 178mm

Providing and fixing of PVC waste pipe for Sink or wash basin including PVC waste fittings complete : Semirigid pipe 32mm dia including clamps and fixtures complete as per direction of Engineer in charge

Supplying and fixing and fittins of uPVC pipes of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 78mm dia pipes

Supplying and fixing and fittings of uPVC plain bend of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 78mm dia pipes

Providing and fixing of chlorinated polyvinyl chloride (CPVC)pipes , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes fittings with one CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge(Internal work exposed on Wall) (ASTRAL/ FINOLEX/equivalent) 20mm nominal bore

Providing and fixing of chlorinated polyvinyl chloride (CPVC)pipes , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes fittings with one CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge(Internal work exposed on Wall) (ASTRAL/ FINOLEX/equivalent) 15mm nominal bore

Providing and fixing PTMT Fittings as per approved quality and colour as per the direction of Engineer in Charge. (prayag/shakti/Polytuf/ equivalent) 15mm dia pillar cock

Providing and fixing PTMT Fittings as per approved quality and colour as per the direction of Engineer in Charge. (prayag/shakti/Polytuf/ equivalent) CP brass Grating