National Institute Of Science Education And Research Tender

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Providing and fixing factory made W.P.C. door frame of size 125x60 mm made out of solid WPC, mitred at corners. The door frame to be fixed to the wall using anchor bolt of Hilti or equivalent make of monimum 125 mm length and 10 mm dia used for brick wall/RCC wall, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges, handle, locking arrangement, vision pannels, aldrop, tower blot etc with necessary screws

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. Make: Asian Royale Shyne/Berger Silky Gamour Note: 1. Before paiting all crack and holes to be repaired and grinding through sand paper to make the surface smooth and even. 2. The agency has to submit the consmuption sheet before execution of work. 3. The consumption is minimum of 0.60 Litre for 10 Sqm.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement/epoxy & matching pigments etc. complete as approved by the EIC. Size of Tile 600x600 mm

Providing and fixing 4 mm thick veener cladding of different pattern approved by EIC with melamine polishing over 12 mm thick ply of century/green. The support for 12 mm thick ply is to be fixed with 19 mm thick 100 mm wide ply wood batten. The anchoring should be 600 mm C/C.

Providing and fixing 4 mm thick charcoal sheet of different pattern approved by EIC over 12 mm thick ply of century/green. The support for 12 mm thick ply is to be fixed with 19 mm thick 100 mm wide ply wood batten. The anchoring should be 600 mm C/C.

Supply and Installation of Anutone 25 mm thick subtex Hush square edge glass fiber core ceiling tile of size 600 x 1200 mm having density 100 Kgs/ m3, weight - 2.5 - 3 kg/m2 , installed by using impaling clip. The Impaling clips are screw fixed to directly to the frames work with the points extending outward. The spikes are tipped with stick 7 adhesive . Then the panels are positioned & press into place. The technical parameters of the subtex Hush are with core glass fiber , Fire - Class 1 & P , Acoustic - NRC up to 0.9 ,Climate ( OC RH ) - 40 & 90 , Termite Resistance - Yes Light Reflection - Yes , Light reflectance - Colour Dependent , Green (RC % ) - 25 , Hygiene ( Voc , Clean Room ) - Low , Class 3 to be fixed with impanel clips which were fixed with Philips head screw to GI frames as per the specification for fixing concealed grid wall paneling system. The concealed Anuton wall paneling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 25 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then fixed Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45 mm from the side wall & fixed at every 1200 mm centers with GI cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35 mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600 mm centers. The framework will maintain 50 / 75 mm gap from the walls. Now cladding the panels on the CC 25 with the help of Anatone impanel clips to get a flush groove finish. Test certificate of the use products shall be submitted after procurement of materials.

Supplying and Fixing of broadloom carpet of Approved MAKE ,100% Nylon Cut Pile, Chromojet Printed, Height 8 mm (± 1 mm),Total Height 11 mm (± 1 mm),Stitch / 10 cm 41-43 (± 2% ), Pile Weight Net less Than 1000 GSM (± 5% ), Total Weight 1991 GSM (± 5% ), Secondry Backing PP Mesh, Gauge 1/8 Cut Pile, Latex Natural Rubber, Color fastness to LightTest Method: AATCC 16 (20 AFU) ≥ 4.0 at 80 Hours , Static Electricity Test Method: AATCC 134 Less than 3.5 KV, Hexapod test Method: ASTM D 5252 ≥ 4, Flammability (Radiant Panel) Test Method: ASTM E 648 ≥ 0.45 (Class I) , complete as per drawing , specifications of the architect. The carpet and Underlay (min 6 mm) will be installed with standard Fevicol/Dunlop Adhesives.The flooring to be installed as per the manufacture's specification and to be installed by its authorized agency or as Approved , with minimum 5 Years warrenty from Principal for any manufacturing defects.

Providing and fixing Pillar-cock of Jaquar make DRC-37021 with complete as per direction of EIC

Providing and fixing VGP-81053 Angular Stop Cock with Wall Flange Jaquar make with complete as per direction of EIC

Providing and fixing wash basinMagna Counter Top Wash Basin, Cat No-10079, Size. 63 × 50 cm, Hindware make, connecting pipes with complete as per direction of EIC

Providing and fixing ALD-769, L300x190 Bottle Trap (with Internal Partition) 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange Jaquar make with complete as per direction of EIC

Providing and fixing ALD-805B 450mm Long Braided Hose with Two/one 15mm Nuts & Rubber Washers Without/with Nipple (Suitable for Geysers/wash basin) Jaquar make with complete as per direction of EIC

Providing and fixing ACN-1137N Soap Dispenser with Metallic Bottle Jaquar make with complete as per direction of EIC

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 50 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 20 mm nominal dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Single tee with door, 75x75x75 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm bend

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Single tee with door, 110x110x110 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm

Providing and fixing rubber wood at windows side of required size as per design. The thickness of rubber wood 12 mm. After fixing of rubber wood, the edge will be moulded and PU polished to give wooden structure prominently. The design/pattern will be decided by EIC/end user.

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I).

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Providing and fixing in position Cupboard/rack (2'6" depth) as per the drawings having compartments with vertical partitions spacing between 0.60m to 1.85m and horizontal compartments spacing between 0.40m to 0.70m with intermediate vertical and horizontal partitions made up of 25mm thick BWR Grade solid ply with 1.0 mm thick lamination (white/off white) for inside area and 1.25 mm thick laminates of approved colour and shade on outside surface with a depth from 0.55m up to 0.75 m and bottom, top, outer sides and back side members made up of 19mm thick BWR Grade ply with 1.0 mm thick lamination of approved colour and shade on one side and front shutters made up of 25mm thick BWP Grade block board with 1.50 mm thick lamination of approved colour and shade on both sides with Heavy duty magnetic catcher, lock (Godrej or equvalent make with minimum three keys) and handle of size of 150 mm, tower bolt of the size of 150mm at top and bottom in one shutter, brass hinges with SS finish or good quality pure SS hinges of 304 grade of size of 150 mm and providing teak wood beadings of suitable width all round the shutters, hinges grooves, shelves, outer frame, vertical and horizontal frame including polishing the teakwood beading and providing and fixing sal wood planks of size 25mmx50mm below the horizontal ply boards along each supporting edges with polishing, including the cost of fevicol, nails, screws, tools, plants, materials and labour charges etc complete as per specification, drawings and as instructed by Engineer- in-Charge. The ply wood of century/green. (Only front elevation area will be measured for billing.)

Providing and fixing in position Cupboard/rack (1'6") as per the drawings having compartments with vertical partitions spacing between 0.60m to 1.85m and horizontal compartments spacing between 0.40m to 0.70m with intermediate vertical and horizontal partitions made up of 25mm thick BWR Grade solid ply with 1.0 mm thick lamination (white/off white) for inside area and 1.25 mm thick laminates of approved colour and shade on outside surface with a depth from 0.55m up to 0.75 m and bottom, top, outer sides and back side members made up of 19mm thick BWR Grade ply with 1.0 mm thick lamination of approved colour and shade on one side and front shutters made up of 25mm thick BWP Grade block board with 1.50 mm thick lamination of approved colour and shade on both sides with Heavy duty magnetic catcher, lock (Godrej or equvalent make with minimum three keys) and handle of size of 150 mm, tower bolt of the size of 150mm at top and bottom in one shutter, brass hinges with SS finish or good quality pure SS hinges of 304 grade of size of 150 mm and providing teak wood beadings of suitable width all round the shutters, hinges grooves, shelves, outer frame, vertical and horizontal frame including polishing the teakwood beading and providing and fixing sal wood planks of size 25mmx50mm below the horizontal ply boards along each supporting edges with polishing, including the cost of fevicol, nails, screws, tools, plants, materials and labour charges etc complete as per specification, drawings and as instructed by Engineer- in-Charge. The ply wood of century/green. (Only front elevation area will be measured for billing.)

Supply and Installation of 25 mm glassfiber Grafix Squire edge Glass fibre core as per customise grafix wall hanging grafix tile of size 600 x 1200 x 25mm having all edges encapsulated with chemical treated paint & having density 100-120 Kgs/ m3, weight 1.5 - 3.0 kg/m2 which is suspended by using 0.3mm thick and 25 mm :Core - Glassfibre, Fire – Class 1 & P , Acoustics – NRC 0.95,Climate (OC RH) – 40, 95,Termite resistance ,Light reflectance – 85 %,Green (RC %) – 35, Hygiene (VoC, Clean room) – Low, Class 3 Strength, Load capacity (Kg) - Antisag. Subtex Nubby Grafix squire edge of size 600 x 1200 x 25mm thick shall be placed into the wall. Ensure arrow marks behind subtex panels are orianted in one direction to achieve uniform shade. Test certificate will be submmited after procurement of materials.

Providing and fixing in position office table/front desk with drawer, rack as per the drawings having compartments with vertical partitions spacing between 0.60m to 1.85m and horizontal compartments spacing between 0.40m to 0.70m with intermediate vertical and horizontal partitions made up of 25mm thick BWR Grade solid ply with 1.0 mm thick lamination (white/off white) for inside area and 1.5 mm thick laminates of approved colour and shade on outside surface with a depth from 0.55m up to 0.75 m and bottom, top, outer sides and back side members made up of 19mm thick BWR Grade ply with 1.0 mm thick lamination of approved colour and shade on one side and front shutters made up of 25mm thick BWP Grade block board with 1.50 mm thick lamination of approved colour and shade on both sides with Heavy duty magnetic catcher, lock (Godrej or equvalent make with minimum three keys) and handle of size of 150 mm, tower bolt of the size of 150mm at top and bottom in one shutter, brass hinges with SS finish or good quality pure SS hinges of 304 grade of size of 150 mm and providing teak wood beadings of suitable width all round the shutters, hinges grooves, shelves, outer frame, vertical and horizontal frame including polishing the teakwood beading and providing and fixing sal wood planks of size 25mmx50mm below the horizontal ply boards along each supporting edges with polishing, including the cost of fevicol, nails, screws, tools, plants, materials and labour charges etc complete as per specification, drawings and as instructed by Engineer- in-Charge. The ply wood of century/green. (Only Top area will be measured for billing.)

ELECTRICAL WORK :

Supplying and fixing of 6 Module Modular PVC Surface Flush Box with base and cover plate with 2 nos. of 6/16A socket outlet with 2 nos. of Modular switch including installation, fixing of switch and socket and connection.) in the surface. 2 socket and 2nos. Switch Make: Legrand (Mylinc/Myrius)

Supply, installation of tiltable, 12 watt spotlight as required with decorative finish80 Lm/ Watt, spotlight to ensure focuse beam at desired places, min 20000 hours life, ideal for wooden fixing and ceiling fixing. Make: Philips /Wipro/Panasonic/Havells

Supply, installation of tiltable, 7 watt spotlight as required with decorative finish80 Lm/ Watt, spotlight to ensure focuse beam at desired places, min 20000 hours life, ideal for wooden fixing and ceiling fixing. Make: Philips /Wipro/Panasonic/Havells

Supply, installation of 2x2 LED light with prefabricated Aluminium frame with the hanger rod/ GI suspender with the 2'x2' LED recessed mounted Panel light, 6500K , 597×597x 70 mm Max. Housing CRCA, Fully Diffused Luminaire, The LED panel will be fixed along with prefabricated Aluminum frame by the agency including making cut out of false ceiling and connection etc. as required. Make: Philips /Wipro/Panasonic/Havells

SITC of 12 watt, 4 way LED Wall Light / Cross Shap Wall Light . IP Rating IP20 Make: Philips /Wipro/Panasonic/Havells

SITC of Recessed mounted/ suspended type 36 watt 2'x2' luminaire 6500K, IP20, IK02, 120 lumen per watt, Cool day light, square shape fixtures suitable suspended mounting to align the linear lighting layout with the office architecture and suspended with required hanging rod. Make: Philips /Wipro/Panasonic/Havells

SITC of 10 watt round type corridor LED downlight, Cut out size-110mm, CCT-6500 k, Color: Cool Day Light Input Voltage 220-240 V Line Frequency 50 Hz Make: Philips /Wipro/Panasonic/Havells

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way, Double door VTPN DB Make-Legrand/Hager/Schnieder/Havells

Supplying and fixing 63 A rating, 4pole, 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required in the existing DB.Make- Legrand/Hager/Schnieder/Havells

Supplying and fixing 40 A rating, 240/415 V, 10 kA, "C" curve, TP MCB (miniature circuit breaker) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required in the existing DB.Make- Legrand/Hager/Schnieder/Havells

Supplying and fixing 10-32 A rating, 240/415 V, 10 kA, "C" curve, SP MCB (miniature circuit breaker) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required in the existing DB. Make- Legrand/Hager/Schnieder/Havells

Supplying and fixing of TPN Steel enclosure with following rating, four pole, (three phase and neutral), 25 Amp 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the TPN enclosure complete with connections, testing and commissioning etc. as required. Make- Legrand/Hager/Schnieder/Havells

SITC of Pop-up type 8 module (2x4) flush-mounting boxes for furniture and to be equipped Slim design for perfect integration into the furniture, to be equipped with Arteor socket outlets, HDMI port, RJ45 Audio port, supplied alongwith installation kits for table top. Ref. Legrand model-6540 05, 2x4m.Black+ins 10384 Make- Legrand/Hager/Schnieder/Havells/Equivalent

Supplying and drawing following sizes of 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required. Cable: 2 X 0.5 sq. mm cable Make: Make: Polycab/Finolex/RR Kabel

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Cable: 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Make: Make: Polycab/Finolex/RR Kabel

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Cable: 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Make: Make: Polycab/Finolex/RR Kabel

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 4 X 4 sq. mm + 1 X 4 sq. mm earth wire Make: Make: Polycab/Finolex/RR Kabel

Supply and fixing of following sizes of Casing Capping as per site condition (Size:- 38x16 mm) or Medium Class PVC conduit (Color-White) along with Accessories in surface/recess including cutting the wall and making good the same in case of making recessed conduit as required. Size:-Conduit Size:- 25 MM Dia , Make:- Precesion/ Kinjal/Modi Casing Capping Size:- 38x16 mm , Make:- Legrand/AKG/Panduit

Supply Installation Testing And Commissioning of Audio Video System

SITC OF Complete Video Conference System -KX-VC1300SX (1+3 MULTIPOINT CONNECTION) CONFIGURATION - 12X OPTICAL/10 X DIGITAL ZOOM PTZ CAMERA -1 NO REF. MODEL-GP-VD170SX/Equivalent, including ceiling mount Bracket for Camera) FULL HD IMAGE QUALITY, WIRELESS BOUNDARY UNIDIRECTIONAL MICROPHONE -1 NO Ref. PANASONIC-WX-ST700/BOSCH/equivalent) Audio Output-HDMI*5, Stereo mini-plug*4 x 1 (ø0.35 cm), RCA x 1 (Stereo) USB MEMORY RECORDING , Network-RJ45 x 1 1000BASE-T/100BASE-TX/10BASE-T Full Duplex MULTY POINT CONECTION UPTO 4 SITES Make: Panasonic/Equivalent

SITC of Wireless gooseneck table top microphone (1 Chairman Unit + 8 Delegate Units) Nominal Acoustic Input 85dB SPL Frequency Response 400Hz to 10kHz Chairman Unit- Microphone on/off button. • Chairman priority button. • Rotary volume control for adjusting headphone volume. • Loudspeaker, automatically muted when microphone is on. • Microphone ‘on’ indicator (red LED). • Light ring indicator on microphone stem, lights up red when microphone is on. Delegate Unit- Microphone on/off button. • Rotary volume control for adjusting headphone volume. • Loudspeaker, automatically muted when microphone is on. • Microphone ‘on’ indicator (red LED). • Light ring indicator on microphone stem, lights up red when microphone is on. Make: (Bosch-CCS 700 Wireless/Equivalent)

CCSE-CU CCS700 Conference Control unit CSS-CU COONTROL UNIT Better discussion control Controls up to 50 Discussion units 3-Band equaliser for better sound performance Audio interfaces for connecting external audio equipment’s

SITC of PC PERIPHERIAL OPTION FOR SKYPE for conferencing (Ref. MODEL-KX VCZ-501) Make: Panasonic/Equivalent

SITC of PANASONIC HDVC MOBILE LICENCE (Ref. Model no.-KX VCS351X FOR HDVC 1300)

SITC of Interactive Flat Panel Built in OPS, Panel Size- 98" Panel Technology IPS, Aspect Ratio 16 : 9, Native Resolution 3,840 x 2,160 (4K UHD), Brightness w/o Glass : 490 nit (Max.), 390 nit (Typ.) w/ Glass : 450 nit (Max.), 350 nit (Typ.), Contrast Ratio 1,200:1 Viewing Angle (H x V) 178 x 178, Response Time 6ms (G to G) Life Time (Typ.) -30,000 Hrs (Min.), Operation Hours - 16/7(Hrs/days) Portrait / Landscape- Landscape OPS type compatible- Yes (Slot) In built, OPS Power Built In- Yes, Connectivity-(Input) Video / Audio HDMI (3), HDCP2.2/1.4 (Input) External Control -RS-232C In (1) (Input) USB -USB 3.0 Type A (3), USB 2.0 Type A (3) (Output) Video / Audio -Audio Out / Optical Output Sound Speaker -Yes (10W x 2) with all required Accessory Basic Power Cord 3m, USB Cable (Type A-Type B) 5m, HDMI Cable 3m, Writing Pen (2pcs), User Manual, Quick Start Guide, Carton Box, Remote Controller (include battery 2ea), WiFi module Multi Touch Available Object Size for Touch- Ø3 mm ↑ Response Time- 60ms ↓ (Android), 100ms ↓ (Windows) Accuracy- ±2mm, Interface-USB 2.0, Protection Glass Thickness 4T (Anti-Glare), Protection Glass Transmission -87% Operating System Support -Windows 7/8/10 / Windows XP / Linux / Mac / Android (Supports one point touch on Windows XP / Linux / Mac), Multi Touch Point -20 Points (Max.), RAM-3GB DDR4, ROM- 16 GB, Built in Wi-Fi, , Screen Share, Android-8 or advanced. Warranty-3Year or more MAKE - LG/ newline

Supply, testing and commissiong of 16 Watt , ceiling-mounted Speaker having Frequency Response- (+/-3 dB)-95 Hz - 17 kHz, Frequency Range (-10 dB)-80 Hz - 19 kHz and 80 Hz high-pass filter, 64Watt Peak, Sensitivity (SPL / 1 W @ 1 m)3-84 dB SPL and Maximum SPL @ 1 m4-98 dB SPL (104 dB SPL peak). Nominal Impedance 8 Ω (transformer bypassed), Transformer Taps- (70/100 V) 70 V: 1 W, 2 W, 4 W, 8 W, 16 W 100 V: 2 W, 4 W, 8 W, 16 W, Powder-coated steel grille body. Make:- Bose (FreeSpace FS2C )

Supply, testing and commissioning of 120W Mixer amplifier, 120 W, 4 microphones and background music (BGM) input, nrush current 36 A Frequency response 80 Hz to 18 kHz (+1/‑3 dB @ ‑10 dB ref. rated output), Distortion 1% @ rated output power, 1 kHz Bass Control Max. ± 8 dB, Treble Control Max. ± 8 dB Connector Cinch, stereo converted to mono Sensitivity 200 mV to 300 mV, Impedance 22 kohm S/N (flat at max. volume) ≥70 dB, Headroom 25 dB Connector RCA Cinch, Sensitivity 1 V, Impedance 10 kohm Connector Screw terminal, floating, Max. / rated 180 W / 120 W Make: BOSCH/Yamaha

SITC of 17U/600 MM RACK WITH 6 Socketas, 15 AMP POWER DISTRIBUTION UNIT AND ALL ACCESSORIES Make: NETRACK/LegrandEquivalent

UHF WIRELESS OMINDIRECTIONAL LAPEL TYPE MICROPHONE SYSTEEM Polar Pattern- Cardioid, Battery Life 14 Hours with (2) AA alkalines typical, RF Output- 8 mW Typical, Element ULM18 Directional Microphone, Operating Temperature Range 5º - 45º C (41º - 113º F) Case Material Metal, RF Frequency Range -16MHz Signal-to-Noise Ratio -(A-weighted) greater than 100 dBdB Power Requirement 12-16 VDC, 500 mA max, Controls On/Off, Set, Up, Down, Sync, Antennas Flexible TNC 1/2 Wave Number of Channels 32 Per Band, 8 Simultaneous Diversity -True Antenna, Squelch Tone code plus Amplitude Receiver Type -Synthesized PLL RF Sensitivity (12 dB SINAD)- less than 1.0uV Audio Frequency Response -80 Hz - 18kHz +/- 2dB Balanced Line Level Output (RMS Adjustable)- 10 - 100mV Distortion (@ 1 kHz, 40 kHz deviation) -less than 1.0, 0.4 typical% Dynamic Range -greater than 95 dBdB MAKE–BOSCH (ELECTRO VOICE) MODEL R-300-LAPEL

SITC of AUDIO MIXER with 10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo) / 1 Stereo Bus / 1 AUX (incl. FX), High-grade effects: SPX with 24 programs, 24-bit / 192kHz 2in / 2out USB Audio functions Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter, Includes Cubase AI DAW software download version, PAD switch on mono inputs, +48V phantom power, XLR balanced outputs Make: Yamaha/Equivalent

HIGH SPEED HDMI 2.0 CABLE WITH ETHERNET 15MTR. MAKE-HONEYWELL/ SIMILAR

HIGH SPEED HDMI 2.0 CABLE WITH ETHERNET 3MTR. MAKE-HONEYWELL/ SIMILAR

POWER CABLE -15MTR MAKE-HONEYWELL/ SIMILAR

USB CABLE 15 MTR MAKE-HONEYWELL/D-LINK/ SIMILAR

HDMI 2 IN 4 OUT SPLITTER MAKE-HONEYWELL/ SIMILAR

PC AUDIO CABLE 3.5mm to 2-Male RCA Adapter cable 15 MTR MAKE-HONEYWELL/ SIMILAR

6.5mm Audio Amplifier to 3.5mm AUX Jack Male Cable 15 MTR MAKE-HONEYWELL/ SIMILAR

POLYCAB 1.5 SQMM SPEAKER CABLE (Two pair, 2-core, 1.5 sqmm) WITH 20 MM AKG PVC CONDUITE PIPE, TEE, BEND, CIRCULAR BOX ,ELBOW, NAIL CLIP AND OTHER ACCESSORIES ETC. MAKE-HONEYWELL/ POLYCAB/SIMILAR

LAN WORK :

12U Switch Rack with all Rack Accessories(Fan, PDU with 6A/16A sockets, Cable Manager and other mounting materials) - 1no. - Amount: Rs 12,000/- Depth should be 600mm or more to accommodate PoE switches for Access Points. Make: Netrack/D-Link/Valrack

Cat6 Cable Box (305m each) Make: Molex/Commscope/Honeywell

24 Port Patch Panel(Fully Loaded) Dustcap must be there for each I/O loaded on the panel. Make: Commscope/Systimax/Honeywell/Molex

Cat6 Information Outlet accessories with depth concealed: Metallic Box(to be fixed inside the wall) + Faceplate + Keystone Make: Commscope/Systimax/Honeywell/Molex

1 metre Cat 6 Patch Cord for Rack end Make: Molex/Commscope/Honeywell

Controller based access points. Software based on premise controller. The software should be installable on Linux server. Make: TP Link/HFCL/Netgear

MECHANICAL/HVAC WORK :

Dismantling of Ducting line as required, reinstallation of duct on the existing place.

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Make-Dynacraft/Airmaster/RAVISTER

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications Make-Dynacraft/Airmaster/RAVISTER

Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular /round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. hand fabricated GSS sheet metal rectangular ducting as per IS 655-2006. Make-Tata/Jindal/SAil

Supply and fixing of 19mm thick nitrile rubber ‘0’class insulation over the existing duct with adhesive, Make-Armacell/Armasound/Kflex

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. Make-Dynacraft/Airmaster/RAVISTER