National Institute Of Science Education And Research Tender

TWO BURNER CHINESE COOKING RANGE, Dimension (inch) - 48”X24”X34”+6". Top in 16 swg 304 grade ss sheet double beeded on 3 sides with dripless edges, rear splash split tray of 16” high with 16 swg SS pipe legs and adjustable nylon bullet feet with recessed design chinese Burners T35 (2 nos.) with indivisual pilot flame. Preferred Make- SS-JINDAL / TATA, Burner should be IOCL approved burners

THREE BURNER INDIAN RANGE, Dimension (inch) - 72”X24”X34”+6" Top in 16 swg 304 grade ss sheet with dripless edges and rear splash split tray of 16”high with 16 swg SS pipe legs and adjustable nylon bullet feet with recessed design indian Burners G-10 with individual pilot burner. Preferred Make- SS-JINDAL / TATA, Burner should be IOCL approved burners

CHAPATI PLATE with PUFFER, Dimension (inch) - 72”X24”X34”+6". 12 mm hot M.S. chapati Plate with 304 grade 16 swg body with 18 swg SS pipe legs and adjustable nylon bullet feet, 1 ½” V-Burners - 4 Nos and indivisual pilot Burner with control Valve and puffer made out of C.I plate with holes. Preferred Make- SS-JINDAL / TATA, Burner should be IOCL approved burners

RAJASTANI TANDOOR VAATI, Dimension (inch) - 30"X30"X36". TOP:16 swg 304 grade SS sheet, LEGS: 18 swg 304 grade SS pipes, SHELVES: 18 SWG 304 grade SS sheet, The unit is to be mounted on adjustable nylon bullet feet. STRUCTURE: Top underneath by M.S. angles. Preferred Make- SS-JINDAL / TATA, Burner should be IOCL approved burners

TANDOOR TABLE WITH 2 U/S , Dimension (inch) - 30"X30"X34". TOP:16 swg 304 grade SS sheet, LEGS: 16 swg 304 grade pipes, SHELVES: 18 SWG 304 grade SS sheet, The unit is to be mounted on nylon bullet type adjustable feet. STRUCTURE: Top underneath by M.S. angles. Preferred Make- SS-JINDAL / TATA, Burner should be IOCL approved burners

S.S HOOD, Dimension (inch) - 48”X30”X20”, 18 swg 304 grade SS, Preferred make - JINDAL / TATA

S.S HOOD, Dimension (inch) - 72”X30”X20”, 18 swg 304 grade SS, Preferred make - JINDAL / TATA

S.S FILTER, Dimension (inch) - 24”X24”, 304 grade SS, Preferred make - JINDAL / TATA

SOUND LESS AXIAL FLOW FAN FOR HOT AIR VENTILLATION, 1.5KW/2 HP CG/ALMONARD MOTOR, 13500 CFM, Preferred make - CG / ALMONARD

LPG line with GAS BANK (6 +6 CYLINDER MANIFOLD SYSTEM), 70 ft. long including gas bank. 6+6 (One set working another set standby) LPG cylinder bank of 14.2 kg each LPG cylinder with: 'C' class seamless steel pipe conforming to IS:1239 : 2” for gas bank pipe laying and 1” for rest pipe laying, with twin stage Pressure regulator - Upto 30 PSI (dial type) and supported with wall by providing adequate supports spacing not more than 1.5 mtr., fitted with flanges & accessories and isolation valves having ball valves of approved makes with LPG installation certificate having carbon steel body, SS ball and PTFE seat and all other fittings such as tees, reducers, unions, elbows etc. The piping shall be joined through welding by using welding electrode of ISI marked only. Care must be taken to prevent rusting of piping installation by providing red oxide primer coating and suitable sleeve of GI/wood shall be provided wherever the pipes are crossing through the walls/slabs etc. On completion, the LPG manifold complete with all accesories and indivisual components which are subjected to cylinder pressure shall be capable of withstanding a test pressure twice the working pressure. All the acessories, components used for installation of LPG pipeline system shall have the approval from Oil company i.e. IOCL/HP/BP. Isolation/shut off valves shall be ball valves with installation certificate for use in LPG pipelines and shall have carbon steel body, stainless steel ball and PTFE seat. The work includes supply, installation, testing and commissioning of LPG manifold and supply system with atleast two coat paints as per LPG colour norms.The items covered under scope of works shall include all those ancillary items which may be required to complete the work in all respect whether specificlly mentioned or not. Fire fighting arrangements for LPG bank should be as per the guidelines of statutory body/local authority/local government. Preferred make - MS pipe of JINDAL / TATA

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth evel : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire Make: Polycab / Finolex / Universal / NICCO / Torrent cable

Supply & installation of DOL starter for 1.5 KW 3-Phase (4-8 Amp) motor with interconnection.