National Institute Of Science Education And Research Tender

Providing & laying 2.00mm thick anti static homogeneous polyvinyl chloride sheet with necessary copper strip/plate of thickness 0.50mm including accessories at the joint in flooring and seem welding at the joint of the sheets at an interval of 1.50/2.00mtr by using 4mm dia pvc welding electrod with necessary V groove cutting in approved pattern on a smooth & damp proof base using rubber based adhesives of approved quality and manufacture like Dunlop-758, Fevicol SR-998 etc including rolling with light wooden roller weighing about 5kg all complete as per direction of EIC. 2mm thick.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, door handle of approvd make all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required. Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineerin- Charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness.

Providing and fixing Anodised Aluminium handles 125 mm with plate 175 x 32 mm with SS screws etc. complete as per direction of Engineer-in-Charge. Anodized (AC 15) aluminium

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Filling the gap in between aluminium frame & adjacent RCC / Brick / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineerin- Charge complete.

Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 250x10 mm

Providing and fixing aluminium Sliding Door with Roller from G-Channel with necessary accessories and screws etc. complete

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth& width of profile shall be acceptable. Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). MAKE: Fenesta, PROMINANCE, ALUPLAST.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineerin- Charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness. Toughened Glass

Providing and fixing in position office table/front desk with drawer, rack as per the drawings having compartments with vertical partitions spacing between 0.60m to 1.85m and horizontal compartments spacing between 0.40m to 0.70m with intermediate vertical and horizontal partitions made up of 25mm thick BWR Grade solid ply with 1.0 mm thick lamination (white/off white) for inside area and 1.5 mm thick laminates of approved colour and shade on outside surface with a depth from 0.55m up to 0.75 m and bottom, top, outer sides and back side members made up of 19mm thick BWR Grade ply with 1.0 mm thick lamination of approved colour and shade on one side and front shutters made up of 25mm thick BWP Grade block board with 1.50 mm thick lamination of approved colour and shade on both sides with Heavy duty magnetic catcher, lock (Godrej or equvalent make with minimum three keys) and handle of size of 150 mm, tower bolt of the size of 150mm at top and bottom in one shutter, brass hinges with SS finish or good quality pure SS hinges of 304 grade of size of 150 mm and providing teak wood beadings of suitable width all round the shutters, hinges grooves, shelves, outer frame, vertical and horizontal frame including polishing the teakwood beading and providing and fixing sal wood planks of size 25mmx50mm below the horizontal ply boards along each supporting edges with polishing, including the cost of fevicol, nails, screws, tools, plants, materials and labour charges etc complete as per specification, drawings and as instructed by Engineer- in-Charge. The ply wood of century/green. (Only front elevation area will be measured for billing.) Make: Green, Century.