National Institute Of Electronics And Information Technology Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
National Institute Of Electronics And Information Technology - NIELIT Tender
Furnitures and Fixtures
Eprocure
Opening Date5 Sep 2024
Closing Date26 Sep 2024
Tender Amount₹ 54,08,689
Costs
EMD
₹ 1,10,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Renovation Work Including Interior, Electrical, Hvac, Low Voltage And Furniture For Training Centre At Balasore, Odisha
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DIT_821376_1Tender No
NIELIT BBSR/BALASORE EC/24-25/08/01Tender Authority
National Institute Of Electronics And Information Technology ViewPurchaser Address
-Website
http://http://www.nielit.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Renovation work including Interior, Electrical, HVAC, Low Voltage and Furniture for Training Centre at Balasore, Odisha.
Renovation work including Interior, Electrical, HVAC, Low Voltage and Furniture for Training Centre at Balasore, Odisha.
BOQ Items
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement
: 1.5 coarse sand(zone-III) derivedfrom natural sources : 3 graded stone aggregate 20 mm nominal size derived from
natural sources).
0.5
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
3
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
50
-
-
Brick work with common burnt clay
F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto V level. Cement mortar 1:6 (1 cement : 6 coarse sand)
1
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in superstructure above plinth level upto V level cement mortar 1:4 (1 cement : 4 coarse sand)
5
-
-
Extra for providing and placing 2 nos. 6mm dia MS bars at every third course of half brick
masanory.
5
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
5
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design
approved by Engineer-in-Charge. Granite work
3
-
-
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming
coat on unexposed surface with : Decorative veneer facings of approved manufacture
5
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in
position with necessary stainless steel screws etc. Sal wood
0.15
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
8.5
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
8.5
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square
8.5
-
-
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Decorative type door
0.05
-
-
75mm overall thickness partition withPoviding and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks,
M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of
9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all
complete.
12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)
155
-
-
Providing & fixing decorative high pressure laminated sheet of plain
/wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
50
-
-
Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of
30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. Plain Gypsum plaster board conforming to IS: 2095 Part - 1:2011 (Board with BIS
certification marks) 12.5 mm thick
90
-
-
Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden
/steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 12 mm thick commercial ply conforming to IS : 1328 BWR type
50
-
-
Providing and fixing frame work for partitions/ wall lining etc. made of 50x25mm 16G hollow Aluminium tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with fastner, 75 mm long including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.
80
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
150
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size: 1200 x200mm
30
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting jointing with grey cement slurry @ 3.3 kg/ riser of steps, over 12 mm thick bed of cement mortar 1:3 1sqm including grouting the joint with white cement & matching pigments etc complete Size of Tile 600x600 mm
35
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
Size of Tile 600x600 mm
5
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the
angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section
0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels
0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x
25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in
Charge but
excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)
:2011 (Board with BIS certification marks)
85
-
-
12 mm cement plaster : 1:4 (1 cement : 4 coarse sand)
15
-
-
15 mm cement plaster : 1:4 (1 cement : 4 coarse sand)
15
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
580
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
580
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
580
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
175
-
-
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coatis allowed to dry for 8 to 12 hrs.
3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
5
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): Toughened glass 12 mm thickness Approved by client.
55
-
-
Supplying and fixing Roller Blinds to the following specifications , Fabric shade as approved, sunscreen, dense basket weave 5 % openness factor. Operation: - Manual. Offset side- mounted metal chain operated Mounting: Pocket mounted. Shade Orientation: Regular roll, shade cloth falls at window side of roller. Configuration: Single band AVERAGE LENGTH OF BLIND is 2.0 M to 2.5 M. The fabric to be Fire Retardent certified.
45
-
-
Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customized designs, thickness of 2 mil (0.05mm) without adhesive (0.8) with adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C).
Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors)
Application -
DECORATIVE/PRIVACY FILM ON GLASS
Electronically/computer plotter cut. Applied on glass and other rigid, clear substrates. (partitions, doors, windows etc.) Available in 5 colours
32
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
1.5
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
10
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm
5
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
5
-
-
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
1
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
19
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
15
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 -
0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter
wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T- sections used in false
ceiling support system shall be pre-painted with polyester baked paint, for all heights. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
125
-
-
Providing & fixing acoustic panels any size and shape in approved color and code no. with Standard size & 9mm thickness. acoustic Panels should have Sound Absorption coefficient (NRC) 0.94.
Formaldehyde emission standards of GB18580-2001 class E1, it is a green material with asbestos-free, non-toxic and tasteless gas under extreme temperature, protecting the ozone layer, non-irritant and recyclable. acoustic panels have to be Fire- resistant . Good insulation properties, to prevent transmitting the heat from outdoor to indoor directly as partition or and ceiling, saving 35% of energy, extending the life of air conditioning. acoustic panels are Light weight and
allow free cutting with paper knife.
5
-
-
12mm thick toughened glass door complete with floor spring, handle and lock
32
-
-
Providing & fixing poweder coated aluminium fixed windows with 6mm plain glass complete with EPDM gaskets.
30
-
-
Fabrication and installation of Rectangular Workstation of Size 1050X600x750(H) with
mobile pedestal. Including 45mm thick partition.
5
-
-
Fabrication and installation of Rectangular Workstation of Size 750X600x750(H).
27
-
-
Fabrication and installation of 900mm height counter in Electronics Lab
9
-
-
Fabrication and installing Providing, of L-Shaped Executive Office Table for Cabins, Table Size 1800*750*750(H), Side Table : 900*500*750(H) and back unit of 2700x 400x 750mm
Primary Work Surface Made of 25mm thick MDF both side pre- laminate board OF EXTERIOR grade confirming to IS-14587:1998 with Soft closing access flap with in- build power box are provided on work surface for wire management. Secondary Work Surface Made of 25mm thick MDF both side pre- laminate board OF EXTERIOR grade. Modesty Panel Made of 25mm thick MDF both side pre-laminate board . Under structure Made of 25mm Thick MDF one side Pre- laminated twin board of approved shade confirming to IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 18mm Thick MDF Pre-laminated board approved shade confirming to IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 18mm thick MDF both side pre- laminate board on to top Pedestal construction is BOX-BOX-FILE type. . Handles and locks to be provided. Apart from above specifications, the design/feature of the product.
1
-
-
Providing and Placing of Revolving Mid Back Workstation Chairs. SEAT/BACK ASSEMBLY: The
cushioned seat Seat Size : 48.5 cm.
(W) x 49.0 cm. (D) HIGH assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric.
2
-
-
Supplying and placing training chairs with writing flap fixed powder coated metal base.
22
-
-
Revolving chairs Low back for staff
13
-
-
Reception table in laminate finish
1
-
-
Two seater sofa in leatherite/Fabric finish
1
-
-
Full height storage in Prelaminated board
8
-
-
Low height stoarge in Prelaminated board
9
-
-
Supplying and placing cushioned seat plastic moulded chairs
19
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
45
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2-way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
1
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
150
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2X1.5sq.mm+1X1.5sq.mm earth wire
95
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2X2.5sq.mm+1X2.5sq.mm earth wire
80
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2X4sq.mm+1X4sq.mm earth wire
105
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2X16sq.mm+1X6sq.mm earth wire
80
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
4X10sq.mm+2X6sq.mm earth wire
30
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
4X16sq.mm+2X6sq.mm earth wire
25
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mmX75 mm)
20
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd. 3 pin 5/6 A socket outlet for AC indoor unit
50
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
70
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and
15/16 A modular switch, connections etc. as required.
40
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings as a computer point).
50
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door
1
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door
2
-
-
Supplying and fixing 63 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit
breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
2
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
30
-
-
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
63A
2
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
100 A
2
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
63A
2
-
-
Supply, installation, testing and commissioning of the following sizes of PVC trunking
system with end caps, bends, elbows complete as required.
50x50mm
20
-
-
Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.
25
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
60
-
-
Supplying and installing following size of perforated Hot dipped galvanized iron cable tray (Galvanized thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders 150mmwidthX50mmdepthX1.6mm thickness
35
-
-
Supplying & fixing 600x600mm 36W LED light
25
-
-
Supplying & fixing round downlight 12W LED light
30
-
-
Providing & fixing High wall Split AC with outdoor unit 1 Tr.
1
-
-
Cassette Type AC with outdoor Unit: Supply, installation, testing and commissioning of following minimum capacity 4-way flow Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required.
1.5 Tr.
3
-
-
Cassette Type AC with outdoor Unit: Supply, installation, testing and commissioning of following minimum capacity 4-way flow Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required.
2.0 Tr.
1
-
-
Providing & fixing of Interconnecting refrigerant pipe work with closed cell elastomeric nitrile rubber tubular insulation as per specifications, all piping inside the room shall be
properly supported with hanger
70
-
-
32 mm dia: Providing & Fixing of Rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation.
70
-
-
Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable PVC conduits between indoor and out door unit or as required for ductable units
70
-
-
Providing & fixing outdoor stands
7
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed
conduit as required
20mm
150
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed
conduit as required
25mm
120
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed
Steel/ PVC conduit as required.
1 run of cable
2200
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed
Steel/ PVC conduit as required.
2 run of cable
120
-
-
Bullet Camera: Supply, Installation, testing & Commissioning of indoor/outdoor inbuilt IR
,IP based Bullet camera on wall/pole with mounting accessories and made up of Aluminium having following specifications with BIS certification clearly mentioning the R number of the product etc as required and as per terms and condition of the agreement. Minimum 5 Megapixel
3
-
-
Dome Camera: Supply, Installation, testing & Commissioning of indoor inbuilt IR, IP based Dome camera on wall/ceiling with mounting accessories and made up of Aluminium having following specifications with BIS certification clearly mentioning the R number of the product etc as required and as per terms and condition of the agreement. Minimum 5 Megapixel. IR distance- 20 mtrs. or better
8
-
-
16 Channel IP camera Input NVR: Supply installation testing and commissioning of 16 channel Network Video Recorder with Support 16 Channel IP camera Input decoding upto 8MP resolution preview and playback Max 160 MbPS Processor Dual Core embedded processor Input 16 channel Two way Talk 1 channel input, 1 channel output, RCA user Interface GUI Video Output, 1 HDMI, 1 VGA video resolution 1920x 1080, 1280x1024, 1280x 720, 1024x 768 video recording max 160 Mbps,
1
-
-
Monitor- 22" LED FHD Monitor , 1920x 1080 Pixels, 75Hz, Fliker Free, HDMI, D-Sub.
1
-
-
SITC of 12U rack for switching mounting with fan and power strip PDU, Hardware
Mounting Kit etc. complete as reqd.
1
-
-
Data port RJ-45 port 2 module
50
-
-
SITC 48 Port Jack Panel
1
-
-
SITC 48 Port Manageable Switch
1
-
-
Supplying & Fixing 1mtr. Patch Cord
40
-
-
Supplying & Fixing 2mtr. Patch Cord
25
-
-
SITC EPBAX
1
-
-
Handset
4
-
-
White board 6' x 3'
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements