National Bank For Agriculture And Rural Development Tender

Chipping/dismantling & Providing, laying of 1st quality Antiskid floor tile of specified size of required thickness of approved make confirming to IS-15622 specifications in floor, skirtings over proper cement slurry/necessary fixing material and epoxy based water proof adhesive to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. Including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles complete as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of Engineer -in-charge. (Approved Make- Kajaria/Somany/Simpolo/Rak and equivalent)

Painting two coats of synthetic enamel paint as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance,materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (Approved Make- Asian,Berger, Indigo and equivalent)

Scrapping,Providing and applying 1st Quality emulsion (water based 100% acrylic) or approved equivalent grade interior paint to all type of smooth plasters, concrete, ceilings etc surface. The surface to be painted shall be made free from any loose paint, dust, grease and any fungus, algae or moss, on it shall got be removed thoroughly by vigorous wire brushing and cleaning with water. Then two coats of wall putty white Wallcare Putty and one coat interior grade wall primer be applied after which any surface imperfection such as holes, dents, fine cracks shall be corrected by filling with synthetic grade putty. Thereafter sand the surface with emery paper 180 and wipe clean and apply second coat of interior grade primer and again surface imperfection to be corrected and again surface imperfection to be corrected. Thereafter again sand the surface with emery paper 320 and wipe clean and then apply the premium emulsion in two coats. The color and pattern/ color combination of the paint shall be got approved from Engineer-in-charge/ Nabard Officials. The rate includes cost of all materials, labour, scaffolding, ladders charges, storing & safeguarding the labour in all heights. Contractor has to take all risk insurance policy from reputed insurance agency before commencement of work, contractor has to provide all precautions’ and arrange safety belts, helmets to all working labours at site. (Approved Make-: Asian Royale, Berger Silk ,Indigo Platinum or Equivalent).

Dismantaling, providing and fixing UPVC window size (2 feet X 3 feet) for each bathroom with factory made uPVC white/colour frame with following fittings as per design approved by NABARD which includes- Patterned opaque fibre glass of different sizes, Exhaust fan with louver, Patterned slanting fibre glass and all respective fittings with upvc frame as per direction of NABARD Representative. The design to be approved by NABARD. The price to be inclusive of cementing, grouting, etc as per the site requirement. (Approved Make - Veka or Equivalent).

Dismantling of existing W.B and Providing, fixing testing and commissioning of required size cabinet wash basin with installed brackets, 15mm pillar cock, 15 mm dia- 450 mm long PVC connection pipe, 32mm dia CP waste coupling, 32mm dia PVC waste pipe. The works shall include cutting and making good the walls & floors. (Approved Make:- Kohler,Parryware, Cera, Hindware, Jaquar and equivalent)

Providing and fixing beveled required size of edge design mirror with light and required electrical connection of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Approved Make:- Saint Gobain and equivalent).

Providing & fixing of labour, materials for wash basin wardrobe cabinet unit (3'x7') using superior quality wpc material and granite topping with glossy finish with all required hardware fittings and fixings as per direction of NABARD representative.

Providing and fixing of 1st quality Glass shelf for wash basin as per direction of NABARD representative with all fittings complete.

Providing and fixing design 100mm Overhead shower with wall flange and all required fittings of make complete as per direction of NABARD representative. (Approved Make - Kohler Or equivalent.)

Providing & fixing of 4 layer stainless steel silver cloth drying pulley ceiling hanger at balcony And Utility area for cloth drying as per direction of NABARD representative . The rate also includes the fittings/erection machinery/equipment, temporary supporting structures and members required for erection etc to give a neat and clean appearance and safety aspect.

Providing and fixing round polished 304 grade glossy stainless steel curtain rod of jsw make with rod knobs fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete.

Providing and fixing design decorative brackets fixed both side of the curtain rod with necessary fittings and complete as per direction of NABARD representative .

Providing & fixing in position superior quality of POP or gypsum Ceiling cornice corner design mould and all side edge design mould and also POP or gypsum mould Fan ring of approved manufacture including all fittings and fixings etc. complete as per direction of Engineer -in-charge including cost of all materials, labour T & P Transportation, Taxes and scaffolding etc. complete.

POP or gypsum Ceiling cornice corner design mould

POP or gypsum Ceiling all side edge design mould

POP or gypsum mould Fan ring

Supply and installation of 10 amp modular type switch and 10 amp modular socket(2/3pin) 4 nos with shutter on factory fabricated modular PVC box installed in manner with modular plate cover with all required necessary accessories,connection & testing etc as per site requirement and as directed. 10 Amps. Separate board with 1 switch 1 sockets (Approved make:- Schneider/ Havells/ Legrand/ Wipro/ Goldmedal & equivalent)

Wiring to light points with 2 runs of 1.5 sq mm PVC insulated, 1100V grade, FRLS, multi stranded, copper wire drawn in suitable size, 2 mm thick PVC pipe (heavy duty), with all accessories i.e. bends, JB’s etc laid in concealed manner on wall along with 1 run of 1.5 sq.mm PVC insulated, 1100V grade, FRLS, multi strand, copper wire for earthling and complete in all respect including with use of modular type switches, ceiling roses, angle holders, M.S cover, in concealed manner as mentioned below & making good to the damages caused and as per the direction of the Engineer-in charge. The work includes supplying of PVC pipe (heavy duty), JB’s, elbows, bends, wires, switches, switch boards etc. all complete as per directions of EIC. (Approved make:- RR / Polycab / Syska / Finolex / Plaza & equivalent)

Recessed wiring with (2x2.5+1x1.5 sq)mm2 PVC single core copper wire 100mm PVC heavy-duty Cable trunking from light distributing board to switch board and complete with all accessories, T&P and as directed by the engineer-in-charge. (Approved make:- RR / Polycab / Syska / Finolex / Plaza & equivalent)

Recessed wiring with (2x4.0+1x1.o sq)mm2 PVC single core copper wire 100mm PVC heavy-duty Cable trunking from light distributing board to switch board and complete with all accessories, T&P and as directed by the engineer-in-charge (Approved make:- RR / Polycab / Syska / Finolex / Plaza & equivalent)

Recessed wiring with (4x6.0+1x2.5)mm2 PVC single core copper wire 100mm PVC heavy-duty from light distribution board to switch board and complete with all accessories, T&P and as directed by the engineer-in-charge.(Approved make:- RR / Polycab / Syska / Finolex / Plaza & equivalent)

Fan point controlled by 6A switch & socket type step up regulator modular (5 steps humming free) (Approved make:- Schneider/ Havells/ Crabtree/ Wipro & equivalent)

All sockets of 6A, 2/3 pin socket modular with switch on same board. (Approved make:- Schneider/ Havells/ Crabtree/ Wipro & equivalent)

Supply installation testing AC distribution board with 1 no. DOL Stator,1 no 32 Amp DP MCB Box for AC.(Approved make:- Schneider/ Havells/ Legrand/ Wipro & equivalent)

Supply installation of AC out put Board and Geyser with 20 Amp industrial Socket MCB Legrand make and necessary size board and cover.(Approved make:- Schneider/ Havells/ Legrand/ Wipro & equivalent)

Supply and fixing of 12way double door MCB DB having 63amp DP mcb as incomer with 10 nos 10-32 SP mcb as out goings with all necessary connection in concealed manner. (Approved make:- Schneider/ Havells/ Legrand/ Wipro & equivalent)

Providing and fixing of celling fan with all necessary connection. ( Approve make - Havells OR Equivalent)

Providing, fixing new single piece white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level , including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (Approved Make:- Parryware, Cera, Hindware, Kohler and equivalent)

Dismantling of existing W.B and Providing, fixing testing and commissioning of required size half pedestral wash basin with installed brackets, 15mm pillar cock, 15 mm dia- 450 mm long PVC connection pipe, 32mm dia CP waste coupling, 32mm dia PVC waste pipe. The works shall include cutting and making good the walls & floors. (Approved Make:- Parryware, Cera, Hindware, Kohler and equivalent)

Providing and fixing beveled required size of edge design mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(one in all toilets and one in doctors cabine,dinning) (Approved Make:- Saint Gobain and equivalent)

Providing and fixing of 1st Glass shelf for wash basin as per direction of NABARD representative with all fittings complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Approved Make - Supreme, oriplast,Astral OR Equivalent).

15 mm nominal dia CPVC Pipes

20 mm nominal dia CPVC Pipes

25 mm nominal dia CPVC Pipes

Providing and fixing C.P Twin Bib cock with wall flange of approved quality (Approved make-Kohler or equivalent).

Providing, fixing and testing and commissioning of CP Health Faucet with approved quality (Approved make-Kohler or equivalent).

Providing and fixing Diverter with wall mounted spout with wall flange with approved quality (Approved make-Kohler or equivalent).

Providing and fixing C.P Angle cock with wall flange with approved quality (Approved make-Kohler or equivalent).

Providing and fixing 100mm Overhead shower with wall flange with approved quality (Approved make-Kohler or equivalent).

Providing and fixing C.P. brass toilet paper holder with wall flange with approved quality (Approved make-Kohler or equivalent).

Providing and fixing high quality 100 mm sand cast Iron grating for gully with approved make.

Providing and fixing Polytetra methylene terephthalate(PTMT) liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (Approved make-Kohler or equivalent).

Providing and fixing PTMT towel rail 600 mm long with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not lesscomplete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (Approved make-Kohler or equivalent).

Providing, fixing and testing superior PTMT towel ring with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour (Approved make-Kohler or equivalent).