Municipal Corporation Tender

Conveyance of excavated materials such as rough stone, metal,khoa, chips, sand, surki,quarry rubbish,moorum, laterite stone , washed gravel, flyash and earth away from the work site by mechanical means including loading and unloading and depositing the same within 5km truck lead as per the direction of the Engineer in charge.

Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engineer in charge.

Cement Concrete (1:3:6) with 4cm size Hard Granite Crusher Broken metal including all cost, conveyance, royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engineer-in-charge.

R.C.C M-25 with 20mm size Crusher broken chips including all cost, conveyance, royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engineer in charge.

Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification approved by the department with cost of binding wire 18 to 20 gauge.

Rigid Smooth centerinmg and Shuttering including false work and removing the same after casting etc.complete.(Wall)

Rigid Smooth centerinmg and Shuttering including false work and removing the same after casting etc.complete ( Roof slab).

C.C M20 grade with crushed granite coarse aggregate of size 20mm down graded mixed with concrete mixer with all leads, lifts and delifts including cost, coveyance, royalty & taxes etc. of all materials, all labour charges, T&P, hire & running charges of all machinaries & equipment as required, watering & curing etc. complete as per direction of Engineer-in-charge.

Fabrication and manufacturing of solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessoriesfor walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutott/holes of required sizes for services. yard handling & stacking all complete as per IS 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical and Plumbing inserts will be paid separately).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for compound wall fencing. complete as per drawing including priming with one coat of red oxide primer in all floors as per the direction of the Engineer-in-charge.

Supply laying 110mm HDPE pipe including excavation(below 650mm), back filling & sand bedding (50mm) for cable laying & road crossing as per direction of EIC.

Providing, laying factory made 80 mm thick cement concrete interlocking paver blocks of M-30 grade made by block making machine with strong vibratory compaction of approved size and shape laid over 50mm thick compacted bed of course sand layer including filling sand in the interstics/ joints, including cost conveyance of all materials, labour, and (T&P) required for the work etc comple and as per direction of Engineer in charge

Cost of display board