Municipal Corporation Tender

Supply of 8 Mtr long internally and externally Hot Dip Galvanized Octagonal pole made up of top dia 90 mm & bottom dia 190 mm and 3 mm thick HT Steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base Plate Size 300X300X20 mm thick shall be welded (Inside & outside) with pole shaft, 4 Nos M24X850mm long J Bolt along with Temp plate, 3 Nos Nut & washer, including inbuild JB, containing (SP MCB, Terminal Stud, Backlite Sheet, SS hardwire Etc) Make-Utkal Galvanizers/ Utkarsha/ VAKRANGEE or reputed company only.

Supply of 48.4MM OD HDG Single GI arm bracket (1.5 Mtr Long) suitable for carrying different wattage Street light for Octagonal Pole

Foundation for 8 Mtr Octagonal pole Specification:- (a) Earth work in excavation of foundation in hard soil within 50m initial lead & 1.5 M initial lift including rough dressing and levelling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge. (b) Quarrying, collecting, supplying, filling sand from local area with all leads, lifts and delifts or by mechanical means including cost and conveyance of all materials etc. and spreading the same in layers not exceeding 0.30 mtr. depth for compaction as per direction of Engineer-in-Charge (c) P.C.C of (1:3:6 ) with 40 cm down H.G.C.B metal including hoisting, laying, compacting, curing and watering etc. with all T & P required for the work including cost conveyance royalty and all other taxes of materials complete in all respect as per Engineer-in-charge. (d) R.C.C. M-25 with 20 mm. downgraded black hand granite crushed broken stone chips including cost and conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (e) Supply M.S reinforcement for R.C.C.work including cutting, bending, binding and straightening with cost conveyance, labour, T &P, all taxes of M.S. rod including cost of binding wire 18 to 20 gauge. (f) Rigid and smooth cantering and shuttering for R.C.C. work including false works and dismantling them after casting including cost of materials complete in ground floors.R.C.C. foundation, plinth band footing base of column. (g) 16 mm thick cement plaster in cement mortor (1:6) over brick masonry including cost and conveyance of all materials with all the taxes, royalty, labour, T & P required for the work materials etc. complete as directed by the Engineer-in-charge. (h) Priming one coat with approved Water bound cement primer including cost of Primer. (i) Finishing walls with water proofing cement paint of approved shade in new work two coats to give an even shade including cost of paint.