Municipal Corporation Tender

Supplying all materials and labour for laying sub-base in layers not exceeding 100mm thick watering & compaction to be required density in with PRR. (with dust)

Grade-I + dust - Providing, laying, spreading, and compacting stone agreegate of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 8-10 tones PRR to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of course agreegate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specification for road and Bridge work (4th Revision) Grade-I + dust UNIT = CUM, Taking Output = 360 cum

Grade-II + dust

R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Data for 15 cum)

Rigid & smooth centering & shuttering for R.C.C. and C.C. works including false works, dismantling and removing them from the site after casting, curing including cost of materials etc., complete.

Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge

6mm thick cement plester (1:4) to RCC surface finish smooth including closed deep chiping & slury treatment including all cost conveyance royalty and taxes etc. comp.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of E-I-C (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by E-I-C.

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-40 grade With approved colour design Pattern(Post G. S.T)With Cost of Paver Block.

Conveyance of excavated earth by mechanical carriage from the site where it has been deposited after excavation & disposal of the same within 5km disatance at suitable locations as per the direction of E.I.C. etc. complete.

Provision for unforseen items

Provision for polythene