Municipal Corporation Tender

Providing Cement concrete (1:4:8) with 4cm size hard granite metal (c.b) including cost of all labour, materials with all taxes, lead, royalty T & P etc all complete.

Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in Super Structure

Supplying & fixing of Precast Kerb Stone of size 300mmx300mmx150mm of M-30 grade of approved make, design, colour & size by block making machine with proper compaction fixed in required pattern etc.

16 mm. thick cement plaster (1 :6) over brick or stone masonry

Proving & laying of concrete paver block (60mm ) thk of different size M20 grade of concrete over 50mm thk compacted sand layer including of cost,conveyance & royality of all material.

Providing Cement concrete (1:2:4) with 12mm to 20mm size hard granite chips (c.b) including cost of all labour, materials with all taxes, lead, royalty T & P etc all complete.

Supplying Fitting & fixing M.S. Grill,M.S door & M.S. window,Rolling Shutter with frame with MS angle frame of 35x35x6 mm and shutter section of 30x30x5mm MS angle with welding of 25x6 mm flat and welding of 16 gauge CR sheet with arrangement of clamp fitting of 3 nos of 4" hinges 1 no 2" hinges and 300mmx16 mm Aldrop with8" Tower bolt and grills and gate made out of M.S. square bar / M.S. flats / M.S. angles / M.S. sheet as per approved drawing and design, cutting to required size and welding properly, finished smooth by machine grinding and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P painting a coat of red lead primer etc. as required for the work complete including the cost of making holes on brick or concrete structure subsequent mending good damages complete as per direction of the Engineer-in-charge in all floors.

Providing Mural Painting a coat of primer over plastered surface including cost & conveyance of all materials etc.

Providing weather coat two coat over a coat of primer over plastered surface including cost & conveyance of all materials etc.

Painting two coats on iron/ steel work with synthetic enamel paint of approved quality and approved shade to give an even shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance,taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge.