Municipal Corporation Tender

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-30 grade With approved colour design Pattern etc complete as per direction of EIC.

R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including all cost, conveyance, royalty and taxes etc. complete of all materials to work site as per the specificatiosn approved by the department and the directions of the Engineer-in-Charge

Cement concrete in prop. (1:4:8) in foundation using 4 cm size HGCB metal of quality from approved quarry washed and cleaned including hoisting, lowering, laying concrete, ramming, watering, curing etc to required level lincluding cost, conveyance, royalties and taxes of all materials, shoring, shuttering and dewatering with cost of all labours, hire and running charges of washing pumps, sundries and T & P such as concrete mixer, concrete vibrator required for the work etc, complete as per specificationand direction of E-I-C

CC M-25 with 20mm size downgraded CBHG chips including all cost, conveyance, royalty and taxes etc. complete of all materials to work site as per the specificatiosn approved by the department and the directions of the Engineer-in-Charge

Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 guage binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S. rods or Tor steel linear measurements of rod for finished item of works etc complete as per direction of EIC

Providing 12mm thick Bitumenious expansion joint board etc complete as per the direction of EIC

Cleaning the existing B.T. surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and or compressed air to receive bituminous.

Labour for applying Tack coat including cost of materials,labour T & P Sundries etc complete as per direction of EIC.

Providind and laying "BITUMINOUS MACADAM" with hot mix plant using crushed aggregates of specified grading premixed with Bituminous binder of 60/70 penetration grade of bitumen transportred to site laid over a previously prepared surface with a hydrostatic paver finisher with mechanical control to the required grade level and alignment and rolling with smooth wheeled vibrating and tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H specification for Road & Bridge works etc complete as per direction of EIC.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen transporting the hot mix to work site laying with a hydro static paver finisher with mechanical control to the required grade, level and alignment rolling with smooth wheeled vibratory and tendem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road & bridge work etc complete as per direction of EIC.

Providing and laying of hot applied thermoplastic compound 2.5mm thick including rafleat rising glass beads @ 250gms per sqmt area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC-35 etc complete as per direction of EIC.

Carriage of Excavated earth by mechanical means within 5 km lead including loading and unloading with all cost conveyance T & P sundries etc complete as per direction of Engineer- in-charge.