Municipal Bodies Tender

SITC of 12Mtr highmast pole with 6Nos of 150Watt LED flood loghts including following items: Height of Mast: 16 Mtr, No of Section: Two Section, Material Construction As per BS-EN 10025 :1993 or equiv. IS, Thickness of the section Top: 3 mm (Minimum) Bottom: 3 mm (Minimum), No. of Longitudinal welds / section: One, No of Circumferential welds/section: None, Length of Individual Section Top: 3 mm, Length: 6250 mm, Bottom : 3mm, Length: 6250 mm, Cross Section of Mast: 20 sided polygon continuously tapered telescopically joint as per BS 5135 or equivalent IS, Base Diameter and Top Diameter (A/F) Top : 150 mm, Bottom :360, Type of joints: Overlap, Length of Overlap: Minimum overlap distance shall be 1.5 times the diameter at penetration, Metal Protection System: Hot dip galvanised both inside & outside conforming to IS 4759-1984, IS-2629-1985,IS-2633-1972, Average thickness of galvanization :As per BSEN ISO 1461,. Size of opening and door base: 900 x 250 mm, Type of Locking arrangement: Weather and Vandal Resistant with heavy duty lock,Diameter of Base Plate: 520 mm Thickness of base plate: 25 mm, Lightning protection finial: GI single spike of suitable length to protect lightning with provision of earthing connection, Earthing of the Mast: Three Nos. Earthing terminals using 12 mm.Diameter Stainless steel bolt shall be provided at a convenient location on the base of the mast, one exclusively for the lightning conductor & other two for earthing the mast as per IS:3043-1987,Aviation Obstruction Light: Top of the Mast fixed on the Lantern Carriage., Max. wind speed: 180 Km/Hr as per IS: 875 (Part - III) , Number of foundation bolts: 8 nos., PCD of foundation bolts: 440 mm,Type / diameter / length of foundation bolts: TS 600 / 30 mm dia / 850 mm long,Material of construction Diameter of carriage ring (mm) Construction Number of joints Buffer between carriage & masts Load carrying capacity Total weight of assembly with fittings Number of fittings. Type of fittings/fixture: 40 NB ERW Class B - M. S. Pipe,710 mm (ID) ,6 Arm, Welded, 2 sections, 6-12 Luminaire. Hot dip Galvanised steel, Construction of Foundation for 16 mtr High Mast Light: 1. Earth work excavation in all kind of soil including moorum and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing and leveling the bed up to the required depth and depositing the excavated materials at places away from the work site with initial lead of 0.50 m and initial lift of 1.5m and laying in layers not exceeding to 0.30 m and breaking clods and as per direction of E-I-C. Qty 1 x 2.15 x 2.15 x 1.70 = 7.86cum 2. Carriage of Excavated earth by mechanical means within 5 km lead including loading and unloading with all cost conveyance T & P sundries etc complete as per direction of Engineerin-charge. = 7.86 cum 3. Supply and filling in foundation and plinth with river sand, in layers including watering, with cost, conveyance, royalties, and taxes of all materials, cost of all labour, carriage of water, sundries T & p required for the work etc all complete as per the specification & direction of E-I-C. Qty 1 x 2.75 x 2.75 x 0.10 = 0.76 cum 4. PCC in prop. (1:4:8) in foundation and bed using 4 cm size h.g CB metal of approved quality and approved quarry including hoisting, lowering, laying concrete, and compacting the same to required level, with compaction, watering and curing including cost, conveyance, royalties, and taxes of all materials with cost of all labours, sundries and T & p such as hire charges of concrete mixer. concrete vibrator required for the work etc complete as per the specification and direction of E-l-C. Qty 1 x 2.15 x 2.15 x 0.10 = 0.46 cum

Supply & Installation of 110W (±5%) LED Street light with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK07 (impact resistance) heat resistance toughened glass with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz,Operating Temperature-10°C to 55°C, Driver Power Factor 0.90, Driver THD 10%, Driver efficiency85% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least 155 lumens per watt and a system efficacy 125 lumens per watt with a CRI70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UVresistant polycarbonate120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be 50,000 Hours, Higher voltage Auto Cut- off 320 VAC with Phase-to¬Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification.(Make- Havells/Crompton/Phillips/Bajaj/Surya/Jaquar)

SITC of 16Mtr highmast pole with 9Nos of 200Watt LED flood loghts including following items: Height of Mast: 16 Mtr, No of Section: Two Section, Material Construction As per BS-EN 10025 :1993 or equiv. IS, Thickness of the section Top: 3 mm (Minimum) Bottom: 4 mm (Minimum), No. of Longitudinal welds / section: One, No of Circumferential welds/section: None, Length of Individual Section Top: 3 mm, Length: 5470 mm, Bottom : 4mm, Length: 10980 mm, Cross Section of Mast: 20 sided polygon continuously tapered telescopically joint as per BS 5135 or equivalent IS, Base Diameter and Top Diameter (A/F) Top : 150 mm, Bottom :410, Type of joints: Overlap, Length of Overlap: Minimum overlap distance shall be 1.5 times the diameter at penetration, Metal Protection System Hot dip galvanised both inside & outside conforming to IS 4759-1984, IS-2629-1985,IS-2633-1972, Average thickness of galvanization :As per BSEN ISO 1461,. Size of opening and door base: 1200 x 250 mm, Type of Locking arrangement: Weather and Vandal Resistant with heavy duty lock,Diameter of Base Plate: 590 mm Thickness of base plate: 30 mm, Lightning protection finial: GI single spike of suitable length to protect lightning with provision of earthing connection, Earthing of the Mast: Three Nos. Earthing terminals using 12 mm.Diameter Stainless steel bolt shall be provided at a convenient location on the base of the mast, one exclusively for the lightning conductor & other two for earthing the mast as per IS:3043-1987,Aviation Obstruction Light: Top of the Mast fixed on the Lantern Carriage., Max. wind speed: 180 Km/Hr as per IS: 875 (Part - III) , Number of foundation bolts: 8 nos., PCD of foundation bolts: 490 mm,Type / diameter / length of foundation bolts: TS 600 / 30 mm dia / 850 mm long,Material of construction Diameter of carriage ring (mm) Construction Number of joints Buffer between carriage & masts Load carrying capacity Total weight of assembly with fittings Number of fittings. Type of fittings/fixture: 40 NB ERW Class B - M. S. Pipe,710 mm (ID) ,8 Arm, Welded, 2 sections, 9-18 Luminaire. Hot dip Galvanised steel, `