Municipal Bodies Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 71,908Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_ORULB_97895_1Bid Award Id
ViewTender No
KHRD/06/2023Tender Authority
Municipal Bodies ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Rough dressing the trenched ground including breaking clods ncluding cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
831.9
665
0.8
... More
Fine dressing of the ground including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
831.9
1697
2.04
... More
Mixing earth and sludge or manure in the required proportion including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
249.6
5091
20.4
... More
Spreading of sludge, dump manure and / or good earth in required thickness including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
831.9
49498
59.5
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fin
831.9
27702
33.3
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
166.4
20750
124.7
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
50
9405
188.1
... More
Holes 60 cm dia, and 60 cm deep.
60
3294
54.9
... More
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer , dressing etc., lead upto 50 meter and lift upto 1.5 m including cost of labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
60
15318
255.3
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 nos ( 3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height including cost of all materials,conveyance, labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
30
9684
322.8
... More
Providing and applying anti termite treatment of infected trees i/c all branches/leaves by spraying chemical emulsion 0.5% (Chlorpyriphos 20% EC) concentration through power spray machine (@ 100 ml Chlorpyriphos per tree i/c cost of chemical) including cost of all materials,conveyance, labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
50
20933
418.67
... More
Providing, laying and jointing in position HDPE Pipe suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer's instructions, including earth work in excavation and refilling including cost of all materials, labours, equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge. (Earth work includes 600 mm of soil cover over the pipe). 63mm (OD) 10 kg/cm2 PE100 HDPE Pipe
100
40800
408
... More
Providing, laying and jointing in position PVC pipe conforming to IS:4985 (ISI mark and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer's instructions, including earth work in excavation and refilling including cost of all materials, labours, equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge. (Earth work includes 300 mm of soil cover over the pipe) Pipe 63 mm (OD) 6 kg/cm2
30
8568
285.6
... More
Pipe 50 mm (OD) 6 kg/cm2
50
10800
216
... More
Pipe 40 mm (OD) 6 kg/cm2
100
14500
145
... More
Providing & fixing of NPC In-Built Drip Line 16mm/30cm/2Lph with fittings. including cost of all materials,labours, equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge.
150
7800
52
... More
Providing & fixing of Mini 8 Series pop-up sprinkler. Built to accommodate Lower pressure with radius of throw 20 to 30 ft. & flow of 0.76 to 5.5 USGPM at operative pressure of 1.72 to 4.48 Bar (25-65 PSI), the sprinkler shall be gear driven rotary type full & part circle (40-360 degree) in one,5'' pop-up hight,having 20mm(3/4") Female threaded inlet, Check-O-Matic maintains up to 2.8m (8'), with 12 nos. Nozzle tree for trajectory 8 nozzle for standard 25 deg. and 4 nozzle for 10 deg.The body of sprinkler is ABS plastic & non - corrodible including cost of all materials, labours, equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge.
8
19200
2400
... More
Providing & fixing of LPS Series pop up sprinkler. Available with pre-installed,color-coded Variable Arc Nozzles in five radii.Radius of throw 7 to 18 ft. & flow of 0.30 to 4.5 USGPM at operative pressure of 20 to 70 PSI,adjustable part-circle (40-360 degree) ,having 13mm(1/2") Female threaded inlet.The body of sprinkler is ABS plastic & non - corrodible including cost of all materials,labours, equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
40
38760
969
... More
Providing & fixing of TORO make swing pipe of 13 mm ID pipe, 1 feet length with street elbow.including cost of all materials, labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
60
23400
390
... More
Providing and fixing of Service Saddle 503 single branch. Coupling with pipes from D 20 up to D 110 mm,threaded branches from 1/2” to 3”.Coupling with pipes from D 20 up to D 315 mm, threaded branches from 1/2” to 4”.- Provided with 2, 4 or 6 bolts according to the diameters and metal reinforcing ring on the threaded branches.- 508 double branch. according to the diameters and metal reinforcing ring on the threaded branches Saddle body in PP black co-polymer, nuts and bolts in zinc chromed steel, o-ring gasket in NBR, reinforcing ring PP Service Saddle 40mm x 1/2'' Sizein AISI 430. Coupling to pipes complying:- PE metric sized according to, DIN 8072-8074, ISO 3607 and EN 12201.- PP metric sized according to ISO 3609, UNI 8318, DIN 807, including cost of all materials, labours, equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge.
60
10440
174
... More
PP Service Saddle 50mm x 1/2'' Size
5
960
192
... More
PP Service Saddle 63mm x 3/4'' Size
3
1188
396
... More
PP Service Saddle 63mm x 1 1/2'' Size
2
870
435
... More
Providing and fixing of PVC Ball Valve true union, free support. EPDM seals, PE ball seats. Operating pressure PN 10 at 20° C up to DN 50, PN 10 at 20° C DN 65-80, PN 6 at 20° C DN 100. ISO metric (1V322) and BS standard (3V322) plain solvent weld socket; BSP threaded female socket (1V321)including cost of all materials, labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.PVC Isolation Ball Valve 63mm
4
14640
3660
... More
Providing & fixing of Brass Quick Coupling valve of size 3/4" alongwith Plastic Cover & complete fittings and accessories. The QCV shall be attached to a Solid support to prevent rotation including cost of all materials, labours, equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge..
4
8064
2016
... More
3/4" Brass QCV Key
2
1560
780
... More
3/4"Brass Swivel Elbow
3
3312
1104
... More
Providing & fixing of a 2'' Size double acting air release valve made of Cast Aluminium body combines lightweight strength and corrosion resistance. The air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 80 PSI.including cost of all materials,labours, equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge.
2
4992
2496
... More
Providing & fixing of Plastic Valve box on all valves. The valve boxes shall be heavy duty plastic with poly vinyle chloride reinforce and a green top including cost of all materials, labours, equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.12'' Size Rectangular Valve Box
4
17856
4464
... More
10'' Size Round Valve Box
2
4800
2400
... More
6'' Size Round Valve Box
4
5352
1338
... More
Providing & fixing of Solenoid Valve BSP threaded, 24 volt 50 HZ AC Plastic solenoid valve having max. working pressure of 150 PSI, Globe/angle construction, precise pressure control option with compact EZ Reg dial design, tough 33% glass filled Nylon (GFN) and stainless steel construction external manual bleed for system flushing, manual flow control: adjustable to zero flow, self aligning bonnet, easily serviceable without system removal, proven encapsulated, injection moulded solenoid Inrush : 0.30 Amps, 9.6 VA Holding : 0.20 Amps, 4.8 VA including cost of all materials, labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.2" Solenoid Valve
2
22800
11400
... More
TORO Make EZR-100 Pressure regulator for Drip Solenoid Valves
2
9480
4740
... More
Providing & fixing of Irrigation Controller for outdoor mounting suitable for operation on 220 Volts 50 Hz AC supply, 9 volt battery backup having 16 total start times, 365 days calendar , large easy to read display, colour coded 10 position dial for easy programming, self diagnostic circuit breaker for identifying and overriding an electrical malfunction of valves, station run times of 1 minute to 10 hours in 1 minute increments, season adjust setting from 10 to 200% in 10% increments, rain delay setting from 1 to 7days ,Programmable master valve On/ Off per program. Non volatile memory for retaining program data through power failures of any duration, weather resistant metal, locking cabinet with heavy duty internal transformer 24 volt AC , 0.5Amps output per station, 24 V AC, 1.25 Amps. Output including Master Valve. station count modularity from 4 to 24 stations using 4 to 8 station modules for flexibity including cost of all materials, labours/ equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge. 24 Station Irrigation Controller
1
45000
45000
... More
Providing and fixing DBY, DBR connector with splice kit including cost of all materials, labours/ equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge.
10
4800
480
... More
Providing & fixing of Pump unit with 5.2 LPS at 60 Mtr. Head along with Star-Delta Starting control panel, with Suction & Delivery header, Pressure Gauge, NRV, Gate Valve, Water level controller with all fittings and accessories including cost of all materials, labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
1
96000
96000
... More
Providing & Fixing of 3'' Size Disc Filter with Pump Unit including cost of all materials, labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
1
24000
24000
... More
Supplying, fitting and fixing Unplasticized polyvinyl chloride pipes,conforming to IS certification having thermal stability for cold water supply including all UPVC plain & brass threaded fittings includes jointing of pipes & fittings with one step non heat solvent cement ,trenching ,refilling & testing of joints including cost of all labours, materials, conveyance, loading and unloading, all taxes and sundries and T&P etc all complete as per direction of the Engineer -in-charge. 40mm dia pipe
185
99900
540
... More
Supplying all materials, labour, taxes, T & P and fitting & fixing of different water supply CP on Brass or GM concealed fitting and fixture Long Body bib cock
12
7200
600
... More
Earth work in excavation by manual / mechanical means in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
217.5
50525
232.3
... More
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) ,mixing in concrete mixer, lowering and compacting in proper thickness , watering & curing for the required period, including all cost of labour ,material, conveyance,royalties and taxes , sundries , T&P etc. complete as per the direction of Engineer-in-charge.
65.3
335067
5131.2
... More
Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
21.8
10590
485.8
... More
Providing and laying factory made kerb stone of M30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge including cost all materials, conveyance , royalties and taxes , loading and unloading cost of all labour,sundries, T&P etc.complete.
1550
386802
249.55
... More
Providing and laying factory made kerb stone of M30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge including cost all materials, conveyance , royalties and taxes , loading and unloading cost of all labour,sundries, T&P etc.complete.
1044
511695
490.13
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P, as per design and direction of the Engineer -in-charge.
145
14819
102.2
... More
Earth work in excavation by manual / mechanical means in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
12
2787
232.3
... More
Providing and lying Plain Cement Concrete (1:4:8)in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
1.8
9236
5131.2
... More
Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
1.8
874
485.8
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and taxes ,sundries ,T & P, complete as per the directions of Engineer-in-charge.
8
817
102.2
... More
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement. footing and pedestals
3.4
22634
6657.3
... More
Roof beams & Columns
0.8
11582
14477.5
... More
Slab
1.3
16988
13068.4
... More
Providing, fixing in position TMT/Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of all materials, conveyance, taxes , T&P, cost of binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
6.6
58515
8866
... More
Providing and fixing 12 mm thick frameless toughened etched glass Partition of approved brand with machine polished edges including top & bottom patches,QBPF-3(TOP 1500mm long),QBPF-3(BOTTOM 1500mm long), as approved by the EIC with all arrangements and making necessary holes etc. all complete, including all cost of labour, material, conveyance, T&P etc.as per direction of Engineer-in-charge
10.5
57429
5469.5
... More
Hoisting joists and trusses and placing in position including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
960
61920
64.5
... More
Providing and fixing of 6 mm thick (minimum) co-extruded UV Protected Multicell Polycarbonate panels with 3 cells - 4 walls structure with panel width of 700 - 900mm and having vertical standing seam at both sides of the panel minimum protruded 15-20mm height for better connector engagement. Panels shall be fixed on Purlin with the Z-type stainless steel fastener and snap on connectors. Panel shall be secured with Snap on connector to interlock the panels shall have 2-4 tooth locking with continuous connector mechanism along with Standing seam to ensure maximum uplift capability. Fasteners shall be fixed on Purlins using minimum 3 self drilling screws for maximum wind uplift capability. Panel shall be sealed with Anti-dust Aluminium tape / Aluminium U Profile(mill finish) for ends. Panels shall be tested against fire as per EN 13501-1:2007 in an international accredited laboratory and classified B-s2, d0. Panel shall be manufactured in a manufacturing facility with approved Quality Assurance procedure as per ISO 9001 & ISO 14001. Multicell Panels shall be fixed over structural steel / MS purlin(shall be paid separately) conforming to the detail technical specifications as below and as per approved colour and directions of Engineer-In-Charge including the cost of cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge. MAKE:- Dpi/ Lexan/ Sabic Innovative Plastic India Pvt Ltd. (Formerly GE Plastics)/Equivalent
42.7
181026
4239.5
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including cost of all materials, conveyance, loading and unloading,cost of labour, scaffolding, staging, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
18.1
107218
5923.7
... More
Two Seated See Saw
3
135000
45000
... More
ABB Crunch
1
57000
57000
... More
Hip Rise on Paralell bar
2
158000
79000
... More
Earth work in excavation by manual / mechanical means in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
54.5
12660
232.3
... More
Providing and lying Plain Cement Concrete (1:4:8) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
4.7
24116
5131.2
... More
Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
136.4
66263
485.8
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and taxes ,sundries ,T & P, complete as per the directions of Engineer-in-charge.
36.3
3709
102.2
... More
Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
116.3
10130
87.11
... More
Providing and lying Plain Cement Concrete (1:2:4) in foundation & floor using 12 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
9.7
68707
7083.2
... More
Flyash brick masonry in cement mortar (1:6) using flyash bricks having crushing strength not less than 75kg/cm2,immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc.including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labours ,materials, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . foundtion and plint
15.8
73839
4673.4
... More
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement. footing`
5.1
33952
6657.3
... More
Walls
8.7
135021
15519.7
... More
Providing, fixing in position TMT/Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of all materials, conveyance, taxes , T&P, cost of binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
16.6
147175
8866
... More
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
51.1
11252
220.2
... More
Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over a coat of primer, by means of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, labour, all taxes , watering & curing T&P etc complete as per direction of Engineer -in-charge.
51.1
7486
146.5
... More
IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge.
3.7
10392
2808.7
... More
Grassing with selection No.1 grass Turf including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including cost of all materials,conveyance, labour,T&P, etc, all complete as per the direction of Engineer-in-Charge.
70.7
4206
59.5
... More
Supplying, fitting and fixing of stainless steel of 304 grade in hand rail using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mt c/c and stainless square pipe bacing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance,of all materials, labour T&P etc. required for the complete in all respect as per the direction of Engineer -in- charge.
260
70330
270.5
... More
Earth work in excavation by manual / mechanical means in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
53.2
12358
232.3
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and taxes ,sundries ,T & P, complete as per the directions of Engineer-in-charge.
35.5
3628
102.2
... More
Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
11.5
5586
485.8
... More
Providing and lying Plain Cement Concrete (1:4:8) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
1.5
7696
5131.2
... More
roviding and lying Plain Cement Concrete (1:3:6) in foundation & floor using 12 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
15
83337
5555.8
... More
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement. FOOTING AND PEDEST
4.7
31289
6657.3
... More
Providing, fixing in position TMT/Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of all materials, conveyance, taxes , T&P, cost of binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
5.6
49649
8866
... More
Supply of LED SPIKE 8w of die cast aluminium housing, transparent, tempered glass diffuser with ip 65 protection with dia-139 mm, height- 354 mm for small bushes inside the lawn. MAKE:- HAVELLS/ PHILLIPS/JAQUAR or equivalent
20
86000
4300
... More
Ø140mm (tol.±5 mm) Ingress Protection (IP) IP65 Surge Protection 3.0 KV Over Voltage Protection Withstand upto 320V (for 2 hours) Open Circuit Protection Provided Short Circuit Protection Provided,Product Lumen Output 800
CRI 70
CCT 3000±255K,Rated Current 0.050 Amp
Power factor ≥0.95
Driver Efficiency 80%
MAKE:- HAVELLS/ PHILLIPS/JAQUAR or equivalent
20
100000
5000
... More
3mtr height decorative GI pole with different cross sections. Painting to be done preferably with different colours at different cross sections while maintaining the aesthetics. Base plate is to be welded at bottom with minimum 10mm plate. Integral connector block for loop in loop out of 4CX16sqmm Al cable is to be provided. Provision to mount one no's MCB is to be given. Supply of suitable foundation bolts is included in the cost of pole. OD of pole top for housing LED lantern should be 55 to 60mm with 40 watt light and LED Post top Lantern made in Die cast aluminum housing with Acrylic clear diffuser for outdoor garden lighting. 40-45W warm white colour (3000K ±300K), IP 65 or better, with suitable constant currrent electronic driver with operating volatage of 160V to 260V. Surge Protection 4KV. Fixture should be suitable for 60mm OD pipe entry with fixing bolts.
10
250000
25000
... More
3mtr height decorative GI pole with different cross sections. Painting to be done preferably with different colours at different cross sections while maintaining the aesthetics. Base plate is to be welded at bottom with minimum 10mm plate. Integral connector block for loop in loop out of 4CX16sqmm Al cable is to be provided. Provision to mount one no's MCB is to be given. Supply of suitable foundation bolts is included in the cost of pole. OD of pole top for housing LED lantern should be 55 to 60mm with 40 watt light and LED Post top Lantern made in Die cast aluminum housing with Acrylic clear diffuser for outdoor garden lighting. 40-45W warm white colour (3000K ±300K), IP 65 or better, with suitable constant currrent electronic driver with operating volatage of 160V to 260V. Surge Protection 4KV. Fixture should be suitable for 60mm OD pipe entry with fixing bolts.
15
375000
25000
... More
S/f of main panel with 125 Amp /4 pole /25 KA MCCB- 1no as incomer, 80a DP power contactor- 1 no, digital timer- 1no with EC bus bar & 10Amp/2pole/25KA MCB-8nos three phase outdoor type double door plinth mounted distribution panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete without accessories for existing damaged distribution panel board. Size of Panel board 36" x 24" x 10".
1
43461
43461
... More
Supply of Distribution panel board outdoor type Busbar of size 14" x14" x 8" plinth mounted
3
10200
3400
... More
Supply & laying of 1 no of PVC insulated/ XLPE power cable of 3.5c 25 sq mm al ar U.G cable
25
5075
203
... More
supply & laying of 6 sq.mm *2 core copper aromoured cable
150
27000
180
... More
Cable trenching in all type of soil excepting rocky soil including excavation of earth, brick laying and filling of sand and loose earth to the original ground level with surface dressing after laying of 1.1KV PVC insulated PVC sheathed armoured cable inside the trench and removal of surplus earth to a lead up to 5KM.
150
19200
128
... More
Supply & laying of 1 no of PVC insulated/ XLPE power cable of 4.0c 16 sq mm al ar U.G cable
70
11270
161
... More
Supply and installation of Chemical Earthing
2
23000
11500
... More
Supplying and fixing of DK Thermoplastic junction boxes of 200 mm x 160 mm x 98 mm deep on surface / recess with 10-16sqmm terminals & knockouts for cable entry including cutting the wall and making good the same in case of recessed as required or equivalent with 1 noof 6-10 A DP MCB
15
35565
2371
... More
Construction of C.C pedestal for fixing of 4W & 8W LED SPIKES FOR BUSHES ILLUMINATION
15
22950
1530
... More
Construction of C.C pedestal Size 2" *2 "* 4" for fixing of 3 METER POST TOP
10
33000
3300
... More
Supply & laying of 1 no 4 sq mm x 4 core copper cable
100
21100
211
... More
Supply & laying of 1 no 2.5 sq mm x 3 core copper cable
100
14500
145
... More
Supply & laying of appropiate size HDPE PIPE.
100
11940
119.4
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia complete as per direction of the Engineer -in-charge.
4.5
1045
232.3
... More
Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre)
1.5
378
252.4
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient .including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge
1
485
485.8
... More
Providing and laying Chlorinated Polyvinyl Chloride (CPVC) pipes & specials in trenches conforming to IS:15778 including all CPVC plain & brass threaded fittings like bend, tees, reducer etc, jointing by solvent cement with non heating process. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.65 mm dia CPVC SCH-80 Pipe
10
17290
1729
... More
taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 100 mm dia C.I D/F sluice valve with hand wheel (PN-10)
1
4111
4111
... More
Providing & fitting fixing cast iron non return valve with double flange ends for water works purpose conforming to I.S: 2685-1971 for following rating & nominal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, all taxes, sundries and T&P etc all complete as per direction of the Engineer -in-charge.150 mm dia C.I D/F non return valve
1
10282
10282
... More
Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 65 MM DOA
3
7668
2556
... More
Providing & fitting fixing single valve conforming to IS: 14845-2000 for water work purpose for the following diameter including the water main as per specification including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.Providing & fitting fixing single valve conforming to IS: 14845-2000 for water work purpose for the following diameter including the water main as per specification including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
1
1763
1763
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with SFRC surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
2
20754
10377
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
5696
5696
... More
Design construction testing & commissioning of following ltr capacity R.C.C Underground Reservoir (UHR) as per detail drawing and specification including fitting, fixing of ladder manhole cover, level indicator, lightenening arrestor, all vertical & horizontal pipe, fitting and valve arrangement including execution of civil works. The design & drawing should be approved by the compitent authority and consultant before execution including all cost of labour, material, conveyance, T&P etc. all complete as per the direction of Engineer-in-charge. sTORAGE RESERVIOR
1000
15780
15.78
... More
5 H.P vertical submersible pumpset , Head discharge of 55mtr and 3 lps respectively
1
32196
32196
... More
DOL Submersibble pump starter for 5 HP Vertical Subermisible pump set having voltmeter, Ammeter, selector switch, indicator lamp etc.
1
5537
5537
... More
50 mm dia H.D.P.E (PN-10) Riser pipe
150
31650
211
... More
4mm2 ,3 core flat copper cable for vertical submersible pump
50
14550
291
... More
6mm2 , 3 core flat copper cable for horizontal pump
50
20950
419
... More
50mm dia S.S nipple
5
1745
349
... More
50mm dia C.M.N.R.V
2
5430
2715
... More
50mm dia C.M.F.W valve
2
3080
1540
... More
50mm dia G.I pipe (heavy)
10
2950
295
... More
80mm dia G.I pipe(heavy)
10
4730
473
... More
100mm dia G.I pipe(heavy)
10
4730
473
... More
Earth work in excavation by manual / mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
33.8
7851
232.3
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour, material, conveyance, royalties and taxes, sundries,T & P etc.complete as per the directions of Engineer-in-charge.
22.7
2319
102.2
... More
Disposal of building rubbish/ malba/ rock/ similar unserviceable, dismantled or waste materials by mechanical means within the specified Lead away from the site, including loading, transporting, unloading to approved dumping ground or as approved/ directed by Engineer-in-charge, including cost of equipments/ labour, conveyance, T&P and taxes etc. as per the direction of Engineer-in-charge.
11.15
3108
278.8
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
3.4
1651
485.8
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement :3 sand : 6 graded stone aggregate of size 20 mm down hard granite crusher broken metal), mixing in concrete mixer, lowering and compacting in proper thickness, watering & curing for the required period .including all cost of labour, material, conveyance, royalties and taxes, sundries,T & P etc. complete as per the directions of Engineer-in-charge.
3.4
18889
5555.8
... More
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 grade Including the cost of Centering and Shuttering in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, rcc FOOTING royalties, watering and curing for the required period, T&P, hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions (as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
5.4
35949
6657.3
... More
RCC Walls
8.1
114248
14104.7
... More
Providing 12 mm thick cement plaster with cement mortar (1:4) with punning for skirting mixed with colouring pigments of approved shade to proper line and level to a specified height complete as per the design & drawing with cost of all materials, labour, conveyance, taxes , T&P etc. All complete as per the direction of Engineer -in-charge
72
13010
180.7
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Covers on drains of footpath of various sizes, of M-25 grade cement concrete, including cost of centering, shuttering, reinforcement of specified dia TMT bars of Fe 500 grade, neat cement punning on finished surface, properly encased on all edges and providing 2 Nos. 12 mm dia bar for hooks, including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
45
85857
1907.95
... More
Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.
30
1800
60
... More
Supply and stacking of Bauhinia purpurea (Kachnar) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
30
1500
50
... More
Supply and stacking of Bottle palm plant of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
30
5400
180
... More
Supply and stacking of Callistemon lanceolatus plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
30
1800
60
... More
Supply and stacking of Cassia fistula (Amaltash) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
30
1800
60
... More
Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
30
4305
143.5
... More
Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge.
30
922
30.75
... More
Providing and Displaying Bismarkia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-incharge.
30
55350
1845
... More
Supply and stacking of plant Calliandra, emarginata of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.
30
1050
35
... More
Supply and stacking of plant Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in-charge.
20
800
40
... More
Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranchesed, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
20
2000
100
... More
Supply and stacking of plant Euphorbia caracasana (bronze colour leaves) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge.
20
800
40
... More
Supply and stacking of plant Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in p.bag of size 20 cm as per direction of the officer-in-charge.
20
600
30
... More
Providing and Displaying Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-incharge.
20
8200
410
... More
Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
20
410
20.5
... More
Supply and stacking of Bignonia venusta (Golden shower) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
20
700
35
... More
Supply and stacking of Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
20
500
25
... More
Supply and stacking of Petrea volubilis plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
20
800
40
... More
Supply and stacking of Quisqualis indica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
20
500
25
... More
Supply and stacking of Ipomea purpurea (Morning glory) plant of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
20
700
35
... More
Supply and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm.in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
20
500
25
... More
Providing and Displaying of Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
20
400
20
... More
Providing and Displaying of Asparagus sprengeri plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
20
400
20
... More
Providing and Displaying of of Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
20
400
20
... More
Supply & Installation at site Sculptures as per approved design & materials including cost of all materials, labours, equipments , taxes , sundries and T&P etc all complete as per the direction of Engineer-in-charge. NOTE:- ( Model & Type of sculpture to be approved by EIC before Installation at Site)
1
300000
300000
... More
Two Seated See Saw
1
78000
78000
... More
Merry-Go-Round
1
79000
79000
... More
Spiral Slide
1
229000
229000
... More
.Rain Bow Cliber
1
47000
47000
... More
Display
1
2500
2500
... More
Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm.to 7cm. and laying in layers not exceeding 0.3 m. in depth asper direction of the Engineer-in-charge.
30.58
7103
232.3
... More
Filling foundation and plinth with sand and wel watered &rammedetc . Complete including cost of sand .
21.09
10245
485.8
... More
Cement Concrete (1:4:8) by using 4cm. Size B.H.G. metal including cost, conveyance etc. complete.
6.73
34532
5131.2
... More
Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete.
0.44
2913
6621.57
... More
R.C.C. work of M 20 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete.
1.63
21042
12909.29
... More
Plinth Band
2.23
14028
6290.95
... More
lintel
1.36
17296
12718.12
... More
Chajja
0.91
1004
1103.93
... More
Col/Beam
3.31
42729
12909.29
... More
Slab
3.97
48896
12316.39
... More
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
8.68
76956
8866
... More
Fly ash Brick masonary in cement mortar (1:6) by using 9" size Bricks Fand B including all cost, conveyance etc. complete.
10.2
50456
4946.71
... More
Fly ash Brick masonary in cement mortar (1:6) by using 9" size Bricks Fand B including all cost, conveyance etc. complete.
27.66
136826
4946.71
... More
16mm thick cement plaster (1:6) for brick or work stone masonry. Per 1 Sqm.
186.45
40357
216.45
... More
12mm thick cement plaster (1:6) for brick work (Per 1 Sqm.)
86.75
13105
151.07
... More
Priming wall with water based cement
86.75
1891
21.8
... More
Distemporing two coats to outside wall suface with approvedshade with all cost complete.
86.75
6364
73.37
... More
Providing and laying ceramic tiles
17.66
15088
854.36
... More
Supplying for fitting fixing of Ceramic wall tile with all cost etc complete.
131.88
112673
854.36
... More
Fitting and fixing of Aluminium door including all cost of materials etc complete.
8
24000
3000
... More
Providing and Fixing MS Grill in Window and Door Including cost,Conveyance Taxes and aaaall Labour Charges
289.23
27476
95
... More
Providing and fixing of Paved tile in floor on sand bed with locking arrangemend & pressed with the bed including cost of precast tiles as directed by the Engineer-in-charge.
15.4
9434
612.66
... More
Fitting and fixing of Sanitary items i.e Western toilet pan,taps,pipes including all cost of materials etc complete. Brand ( CERA,Hindware)
1
60000
60000
... More
Fitting and fixing of 1000 ltr Over head water tank connection including all cost of materials (2nos)
1
8000
8000
... More
Provision Facitation For Internal Electrification Other Unforseen Item etc.
1
20000
20000
... More
Add Display board &photograph,Painting, Glowing Board
1
50000
50000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements