Municipal Bodies Tender

First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened &washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering andcuring etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc.complete in all respect as directed by the Engineer-In-Charge.

Providing, lifting, hoisting and laying Reinforced cementconcrete of M-200 grade as per approved designs anddrawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28days after mixing and test conducted in accordance withI.S. 516 using 12 mm. to 20 mm. size black hard crushedbroken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20mm. size chips not toexceeds 25 %) to be mixed in concrete mixture withPortland slag cement (PSC) including hoisting, lowering,laying and compaction concrete by using vibrators,watering and curing for 28 days, centering and shutteringthen after dismantling and removing debris from the worksite and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost,conveyance, loading, unloading, royalties and taxes of allmaterials and cost of all labours, sundries, T & P requiredof the work etc. complete in all respect as directed by the Engineer-in Charge. But excluding cost and conveyanceof M.S. rods or Tor steel and binding wires and labourcharges for straightening, cutting, bending etc. of M.S.rods or tor steel tying the grills and placing in proper position. Column base & footing

Plinth Beam

Lintel Bend

Roof beam

Roof slab

chajja

First class Fly ash Brick masonry using bricks of size23cm. x 11 cm. x 8 cm. having crushing strength not lessthan 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6)with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc.complete in all respect as directed by Engg-In-Charge.

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in Ground Floor

6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1cement 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.ground floor

Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 25 mm thick cement mortar 1:2 (1cement: 2coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In- Charge at all floors and all heights.

Providing and laying Kota tiles (thickness to be specified by the manufacturer) 1st qualityof NITCO, SOMANY, ASIAN, KAJARIA or equivalentapproved make, colours & shades laid on 25 mm thickcement mortar 1:2 (1cement: 2coarse sand) includingpointing the joints with white cement and matchingpigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.

Providing and laying skirting Vitrified tiles 600x600 mm(thickness to be specified by the manufacturer) 1st qualityof NITCO, SOMANY, ASIAN, KAJARIA or equivalentapproved make, colours & shades laid on 12 mm thickcement mortar 1:3 (1cement: 3coarse sand) includingpointing the joints with white cement and matchingpigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.

Providing and laying skirting dadoos ceramic tiles (thickness to be specified by the manufacturer) 1st qualityof NITCO, SOMANY, ASIAN, KAJARIA or equivalentapproved make, colours & shades laid on 12 mm thickcement mortar 1:3 (1cement: 3coarse sand) includingpointing the joints with white cement and matchingpigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.

16mm cement plaster on internal smooth side ofRCC/brick surfaces with cement mortar of mix 1:6 (1cement: 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.

12mm cement plaster on external RCC/brick surfaces incement plaster 1:6 (1 cement: 6 coarse sand) includingnecessary scaffolding, curing etc. all complete at all floors and all heights.

Finishing wall surface of wall with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to received painting including cost of scaffolding staging charge with all cost.

Painting one coats with any approved colour of Water Bound Wall cement Primer of approved make and finished smooth and even surface to received painting including cost of scaffolding staging charge with all cost.

Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer.

Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surface in Ground Floor

SUPPLYING,FITTING,FIXING OF DOOR & WINDOW WITH STEEL

Painting two coats with approved Enamel Paint on Steel surface over a coat of Red Oxide Primer.

Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour as per specification and direction of the Engineer in charge.

Dressed seasoned sal wood work framed and fixed (wrought and put up) in frames of doors, windows & ventilabours

Supplying and fixing of pre cast inter locking concrete block 80mm thick with crushing strength as per drawing and technical specification clause 1504 of MORTH and specification 6919-11-1986 with all cost of materials, labour, carriage etc complete

2.5 cm thick grading concrete(1:2:2) on roof slab with 6mm size hard granite C.B.Chips on new work including all cost carriage royalty taxes etc complete.first floor

Removal of debris from work site to outside by mechanical meand within 5km lead

sinking of 200mm x 150mm production well through DTH or combinantion drilling rigs in hard rock areas with PVC/GI Casing pipes.

ADD Electrification works estimate provided by GED sub Division,R and B division Bhawanipatna

ADD PH works (I/S E/S estimate provided by competent authority)

Providing and Fixing of steel letter of size 1' 0'' including all cost labour T & P etc complete. Display Board ,Photographs and other unforseen expendicture etc..