Municipal Bodies Tender

C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge.

Fly ash brick masonry in C.M. (1:4) in founadtion & plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge.

Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete.

Fly ash brick masonry in C.M. (1:6) in Super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance, royalty & taxes etc. compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge.

12mm thick C:P (1:6) outside over brick workIncluding all cost conveyance , Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C.

16mm thick C:P (1:6) Inside over brick workIncluding all cost conveyance , Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C.

12mm thick C:P (1:4) outside over brick workIncluding all cost conveyance , Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C.

White washingTwo coat with good shell lime. and outside smooth surface with all cost convayance etc complete.

Painting two coat with weather seal coat over acoat of water bound wall primer.

Supplying all materials, labour, T&P for providing Mild Steel tubular posts and Trusses and base plates made out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete.

Supplying all materials, labour, T&P for providing Mild Steel tubular or rectangular purlins with runners bracing for tubular trusses made out of ERW tubes of O.D.76.1 mm and 3.15 mm thick Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete.

Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.)

Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete.

M.S. Grill gate made out of M.S.flat conforming to IS:2062/2006, painted with red oxide primer as per the design approved .

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Based on SR)

R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & laying (Data for 15 cum) all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. column base footing column upto plinth

R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & laying (Data for 15 cum) all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. plinth beam

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.,including, cutting bending, binding ,& placing, the steal rods as per drawing technical speci fications with cost of binding wire 18 to 20 gauges etc complete.

Rigid smooth centering and shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials complete in G.F.

Supplying all materials, labour, T&P for painting two coats over iron work with any approved SE paint including all cost , labour, T&P etc. complete.

Supplying all materials labour & T&P for constructing of brick masonry inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 80mm thick R.C.C. pre cast slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (750mm x 750mm x 450mm deep)

Fixing ceramic tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete

Fixing chequred tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete

Add cost of photograph etc complete

Supplying all labour T&P materials making and installing the transparency board made of CC of approved size and design painted with green colour and letter writing printed with yellow white colour and directed by EIC.