Municipal Bodies Tender

R.R. stone masonary with C.M. (1:6 ) with all cost , conveyance, etc. complete.

Second footing

Flyash Brick masonary in cement mortar (1:6) by using 9" size fly ash.Bricks including all cost, conveyance etc. complete.

R.C.C. work of M 20 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete.

For Plinth Bend/Plinth Beam

Beams & Columns (Residential)

For Roof Slab / Landing / Waste slab

For Chajja

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

12mm thick cement plaster (1:6) for brick work (Per 1 Sqm.)

Supplying, fitting and fixing of Vetrified tile of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.

Providing and fixing Ceramic tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge.

Priming one coat with any approved primer including cost of primer for Wood work.

Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint.

Priming one coat with any approved primer including cost of primer for Steel work.

Painting two coat with any approved paint including cost of paint

Supplying fitting and fixing of MS steel door and window

Supplying,fitting,fixing up window(sliding type) made up aluminium section 151-154,151-155,as windows frame section No 151-155,151-153 and 151-167 as shutter frame with 5mm thick l fitted with rubber biding including locking arrangement including all fittings including cost of materials all taxes labour,T&P etccomplete as per direction of Engineer-in Charge

Providing fitting and fixing up partition walling OEL Aluminium anodised T section No 9210&9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick pre laminated board Nova pan make and jointing angle No 1855 etc.

Providing fitting and fixing of false ceilling with Aluminium anodised T section No 3215 with 2'centre to centre L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2'x2' suspended from ceilling etc. complete

Finishing wall surface of walls with Acrylic wall putty (water based)of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour T&P etc complete.

hickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of

Any other unforceen item

Photo and sign Board

Electrical items for Lounge

PH items for Lounge