Municipal Bodies Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 67,095Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ORULB_103276_1Bid Award Id
ViewTender No
3/SMC_SBP/2024-25Tender Authority
Municipal Bodies ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
13.05
-
-
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
32.01
-
-
First floor
15.07
-
-
Second floor
3.52
-
-
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
35.42
-
-
Ground Floor (RCC foundation, footing & column base)
31.42
-
-
RCC Column & Beam
101.83
-
-
Lintel
14.09
-
-
RCC roof slab, Chaja etc.
114.28
-
-
Staircase
19.97
-
-
First floor (RCC Column & Beam)
113.04
-
-
Lintel
49.5
-
-
Roof Slab &Chaja at corridor opening
107.9
-
-
Staircase
19.18
-
-
Second floor (Roof slab)
22.58
-
-
Column
11.88
-
-
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(23 cm x 11.5 cm x 7.5 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
11.63
-
-
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(23 cm x 11.5 cm x 7.5 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
16.12
-
-
1ST FLOOR
60.22
-
-
2ND FLOOR
22.4
-
-
Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C GROUND FLOOR
146.13
-
-
1ST floor ( stair case long wall)
435.53
-
-
2nd floor ( stair case long wall)
59.52
-
-
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
97.89
-
-
First floor (outside long wall)
172.25
-
-
Second floor (staircase head room)
129.55
-
-
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
74.49
-
-
First floor, toilet lounge,Knowledge centre,corridor
183.75
-
-
Second floor
32.2
-
-
Supplying, fitting & fixing of vitrified floor Tile of size 600 x 600 mm of approved make laid on 20mm thick cement mortar (1:4) & finishing joints with white cement etc.(Ground floor)
39.98
-
-
In 1st Floor (Staircase tread ),platform
108.38
-
-
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the E.I.C(ground floor)
22.2
-
-
1ST FLOOR STAIRCASE
24.45
-
-
2ND FLOOR STAIR CCASE THREAD
22.2
-
-
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the E.I.C
24.08
-
-
FF TOILET
30.19
-
-
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the E.I.C
69.3
-
-
1ST FLOOR DRINKING WATER
61.74
-
-
Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete including cost of laminated board.
6.62
-
-
Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P including cost of black glass etc complete as per direction of Engineer in Charge.
10.94
-
-
Supplying all materials, labour, T&P and providing and fixing in position M.S panelled door double leaved with M.S frame overall size including frame 1980mm Height x 1070mm Width made out of the following materials conforming to relevant Indian Standard specification, Frame: 35x35x6mm MS angle, Shutter stile: Top and bottom rail 25x25x3mm, MS angle door panell: 1.0mm C R sheet panell stiffner covering width of each leaf 19x5mm MS flat - 3nos on each leaf, Hinges size: 100mm - 6nos (3nos on each side) bought out as per ISS, Hold fast: 35x35x6mm, MS angle 175mm length bifurcated at the tip - 3nos on each side, Handle: 19x5mm MS flat fabricated - 4nos, Aldrop: 2nos bought out as per ISS, Tower bolt: 2nos bought out as per ISS, Approximate weight - 54kg including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
77.35
-
-
Supplying, fitting & fixing of M.S. window grill of approved design
382.9
-
-
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
17.33
-
-
Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C
62.7
-
-
Supplying all materials, labour, T&P and fixing Aluminum frame glass louvers for ventilators
6.84
-
-
Supplying all materials, labour, T&P and Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
640.98
-
-
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the E.I.C (For Plastering surface)
1040.67
-
-
Same as item no. 09
640.98
-
-
Supplying all materials, labour, T&P and finishing walls with water proofing weather coat of approved shade on new work two coats to give an even shade etc all complete as per specification and direction of the E.I.C
399.69
-
-
Supplying all materials, labour, T&P and providing painting 2 coat with any approved enamel paint on new iron work all complete as per specification and direction of the E.I.C
13.15
-
-
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer over iron work all complete as per specification and direction of the E.I.C
13.15
-
-
Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.
28
-
-
Back filling the foundation with excavated earth 1/3 rd volume of Earthwork in excavation Item-1
21.35
-
-
2/3rd volume of earthwork in excavation
42.69
-
-
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50 mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect
13.5
-
-
Dismantling and reinstallation work of 10KW roof top Solar Power plant from First floor to Second floor with dismantling of solar pannels, blocks, module rewiring, civil foundation for inverter, inverter installation, AJB reinstallation, installation and commissioning of system, solar log activation and monitoring, any other additional items required.
10
-
-
Dismantling and removing RCC columns, beams, slabs, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C
2
-
-
Supplying and fixing of 60 mm thick cement concrete interlocking Paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. compete in all respect confirming to IRC SP-63:2018.
40
-
-
Supplying and fixing of Precast Kerb stone of size 300mx300mmx150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. compete in all respect confirming to IS-5758:1984.
140
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the E.I.C.
4
-
-
Drilling suitable holes in reinforcement or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge. Upto and including 12 mm dia
98
-
-
Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes (SDR 11) conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent) 40 MM OUTER DIA C-PVC PIPE (EXTERNAL
10
-
-
32mm Outer dia C-PVC pipe(External)
10
-
-
25mm Outer dia C-PVC pipe(External)
10
-
-
45mm Outer dia C-PVC pipE
45
-
-
Ground floor
5
-
-
First floor
5
-
-
supplying all materials, labour, T&P and cutting holes in R.C.C Floors, roofs etc upto 19mm thick for passing G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:2:4) including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C. GROUND FOOR
5
-
-
First floor
5
-
-
Supplying all materials, labour, T&P for providing fitting and fixing of brass/C.P fittings of the following nominal bore with supply of all jointing materialsetc. all completed as per approved specification and direction of E.I.C 15 mm dia C.P Bib cock(Short Body) (JAQUAR Make, Model: CON-CHR-047KN)
2
-
-
15 mm dia C.P Bib cock (Long Body) (JAQUAR Make, Model: CON-CHR-107KN)
2
-
-
15 mm dia C.P Two way Bib cock (JAQUAR Make, Model: CON-CHR-041KN)
6
-
-
15 mm C.P flange
10
-
-
15 mm C.P Extension piece 50 mm long
10
-
-
15 mm dia C.P Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) (JAQUAR Make, Model: ALD-CHR-579)
6
-
-
15mm dia CP pillar cock (JAQUAR Make, Model: CON-CHR-011KN)
8
-
-
40mm dia brass stop cock/F.W.V (Sakti make)
1
-
-
32mm dia brass stop cock/F.W.V (Sakti make)
2
-
-
15 mm C.P/ concealed stop cock (JAQUAR Make, Model: ALD-CHR-083FT & CON-CHR-083FTK)
3
-
-
15 mm C.P/ Angle stop cock (JAQUAR Make, CON-CHR-059KN)
12
-
-
Overhead Shower ø100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with Shower Arm ø20mm & 280mm Long Round Shape for Ceiling Mounted Showers with Flange (JAQUAR Make, Model: OHS-CHR-1999 & SHA-CHR-475L280}
3
-
-
Sink Cock with Swinging Spout (Wall Mounted Model) (JAQUAR Make, Model: CON-CHR-347KNM)
1
-
-
125mm dia CP gratings
10
-
-
Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C
10 lit PVC low level cistern-White (Slimline-white)
6
-
-
Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 lits capacity on the roof of 1st floor(IInd Floor)
2
-
-
Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (soil, waste, rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent) 110 mmdia UPVC SWR Pipe (Type B)
15
-
-
75mm dia U-PVC SWR pipes (Type B)
15
-
-
75x75x75 mm dia UPVC Plain Shoe Bend 450
2
-
-
110x110x110 mm dia UPVC SWR Single Junction with Door
3
-
-
110x110x110 mm dia UPVC SWR Double junction with Door
1
-
-
110x110x110 mm dia UPVC SWR Bend 87.50
3
-
-
110x110x110 mm dia UPVC Plain Shoe Bend 450
3
-
-
110 mm dia UPVC Cowl
5
-
-
75 mm dia UPVC Cowl
2
-
-
supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.
5
-
-
Supplying all materials, labour, T&P and cutting holes in R.C.C roofs and cornice etc upto 19mm thick for taking HCI/PVC pipes and fittings and repairing the holes after insertion of pipes etc including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
5
-
-
Supplying all materials, labour, T&P and cutting holes in R.C.C chajja for taking HCI/PVC pipes and fittings and repairing the holes after insertion of pipes etc including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
5
-
-
Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.
2
-
-
100 mm dia P trap UPVC
5
-
-
100 mm dia S trap UPVC
5
-
-
Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C.
4
-
-
Supplying all materials, labour, T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.
4
-
-
Supplying all materials, labour, T&P and fixing vitrous China-Half Stall wall urinal Flat back including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. Sensor operated wall Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm (JAQUAR Make, Model: URS-WHT-13253N) and Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock (Battery Operated) (JAQUAR Make, Model: SNR-STL-51087
5
-
-
Supplying all materials, labour, T&P and fixing wash hand basin with hole for pillar tap with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 550mm x 400mm wash hand basin (Hindware/Parryware/Neycer/CERA)
8
-
-
Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C. Pedestrial for 550mm x 400mm wash hand basin White (Hindware/Parryware/Neycer/CERA)
8
-
-
Supplying all materials, labour, T&P and fixing P.V.C waste pipe of the following nominal diameter for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C. P.V.C waste pipe 40mm dia with length not less than 700 mm
8
-
-
Supplying all materials, labour, T&P and fixing 15 mm dia P.V.C connection pipe of the following nominal diameter and making connection with Pillar cock and supply main for wash hand basin complete etc all complete as per specification and direction of the E.I.C.
8
-
-
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.
1
-
-
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with C.P screws and washers etc all complete as per specification and direction of the E.I.C.
8
-
-
Supplying all materials, labour, T&P and fixing of standard sized glass shelf with cp bracket and guard rail and fixed to wooden plugs with C.P screws and washers etc all complete as per specification and direction of the E.I.C. Glass shelf with cp bracket and guard rail (JAQUAR Make, Model: ACN-CHR-1171N)
8
-
-
Supplying all materials,labour, T&P and fixing standard sized CP towel rail/ring complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
8
-
-
Supplying all materials,labour, T&P and fixing standard sized CP Soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
12
-
-
Supplying all materials, labour, T&P and providing Curved shaped urinal partition with 8mm frosted glass Size H: 900mm W: 450mm including fitting & fixing in wall and making good the damages etc as per specification and direction of the E.I. (JAQUAR Make, Model: JSE-CHR-810UC450X)
4
-
-
Providing and laying water proofing treatment in sunken portion/ raised portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. The rate includes provision of outlet pipe of 25mm size CPVC pipe for exhaust of percolation water if any. (CPWD AR Vol-II Si.22.5)
19.53
-
-
Supplying all materials labour T&P and filling in foundation and plinth with coarse sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
1.51
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. -In Ground Floor
0.76
-
-
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.
4
-
-
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C
5
-
-
Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.
20
-
-
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.
1
-
-
Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group A 1.2.1-1.24.2
8
-
-
-do-………Group B 1.2.2 - 1.24.2
13
-
-
-do-………. Group C 1.2.3 - 1.24.2
33
-
-
Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2
6
-
-
Recessed wiring to Callbell point in Group C 1.2.3 - 1.24.2
1
-
-
Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4)
2
-
-
Supply and Fixing of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (Existing) (1.25.1+1.25.4)
8
-
-
Supply and Fixing to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for 2 Module (1.24.1)
15
-
-
..do 4 Module
1
-
-
-do-6 Module
1
-
-
-do-8 Module
2
-
-
-do-12 Module
6
-
-
Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard). 2x1.5 sqmm + 1 x 1.0 sqmm( 1 .8)
170
-
-
-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)
105
-
-
-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)
105
-
-
-do- 4x6sqmm +2x2.5sqmm (1.8.10)
27
-
-
Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK (2.15.3)
1
-
-
Supply and Fixing of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)
6
-
-
Supply and Fixing of 6 way (6+18) TPN MCB DB double door (2.5.6)
1
-
-
Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp (Make:Havels with die cast aluminium housing and frosted glass cover).RUGBY
1
-
-
Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28)
27
-
-
Supply and Fixing of 15W LED Bulb
27
-
-
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.5+3.6)
1
-
-
Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18)
12
-
-
Supply and Fixing of 48" A.C.Cilling fan without regulator including all conections Model:Crompton (jura)/ Usha-(Striker Millenium) /Havells (Velocity/Spark) / Anchor - (XL)/ Orient-(Summer Pride)
6
-
-
S/F of 24W Recess Mounted Square Shape LED luminary,Make-Havells/Crompton/Philips
18
-
-
S/F of Fan hook S, Type on ceiling.(M-22)
6
-
-
Supply, Installation, Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard)
8
-
-
S/F of computer board consisting of 3 nos. of 5 amp Modular plug and switch complete with wiring on 12M GI.box with Front cover(1.24.9 +1.25.4 + 2.5.1)
2
-
-
S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30)
1
-
-
S/F of 60 watt. LED street light fitting including necessary connection. (Make- crompton/poly cab/Havells/ HPL/Philips)
2
-
-
S/F of 1.5sqmm mult-strand copper wire for invertor wiring
60
-
-
S/F of 6 pin 15/16A Modular socket (1.25.5)
6
-
-
S/F of 100W Step type Modular Regulator
6
-
-
S/F of 32A DP Modular Switch with Neon Indicator (Heavy Duty)
6
-
-
S/F of 32A DP MCB for AC
6
-
-
S/F of 63A FP MCB
1
-
-
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the E.I.C.
53.61
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the E.I.C.
20.93
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
11.99
-
-
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
22.11
-
-
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
22.11
-
-
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
21.71
-
-
RCC Column & Beam
105.65
-
-
Lintel
36.65
-
-
RCC roof slab, Chaja etc.
48.7
-
-
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
8.87
-
-
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
21.33
-
-
Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
105.51
-
-
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
145.25
-
-
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
100.96
-
-
Supplying, fitting & fixing of vitrified floor Tile of size 600 x 600 mm of approved make laid on 20mm thick cement mortar (1:4) & finishing joints with white cement etc.
22.59
-
-
Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete including cost of laminated board.
2.21
-
-
Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P including cost of black glass etc complete as per direction of Engineer in Charge.
4.05
-
-
Supplying all materials, labour, T&P and Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
49.84
-
-
Quantity same as Item no. 13
106.38
-
-
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the E.I.C (for outside plaster surface)
267.7
-
-
Quantity same as Item no. 16
211.16
-
-
Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.
4
-
-
1/3 rd volume of earth work in excavation
17.87
-
-
2/3 rd volume of earth work in excavation
35.74
-
-
Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.)
12
-
-
Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4)
6
-
-
Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28)
8
-
-
Supply and Fixing of 15W LED Bulb
8
-
-
Supply and Fixing of 48" A.C.Cilling fan without regulator including all conections Model:Crompton (jura)/ Usha-(Striker Millenium) /Havells (Velocity/Spark) / Anchor - (XL)/ Orient-(Summer Pride)
4
-
-
S/F of 6 pin 15/16A Modular socket (1.25.5)
2
-
-
Supplying all materials, labour, T&P and fixing of Aluminium roof sheet in roof drilling holes in wind ties including fixing of ridges, valleys, wind ties etc all complete as per specification and direction of the E.I.C
50
-
-
Supplying all materials, labour, T&P and fixing of ISMC 125 (12.7 kg per m)
488.95
-
-
Supplying all materials, labour, T&P and providing 25mm thick artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hard granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
32.68
-
-
Supplying, placing and fixing of Godrej Mingle Conference Table with AV Integration (10 Seater) of Frame Material made of Prelaminated Twin Particle Board and Table Top Material made of MDF Board with dimensions of 3000mm x 740mm x 1150mm with termite and weather proof including cost of all materials and direction of Engineer-in-charge
1
-
-
Supplying, placing and fixing of 10 numbers Godrej make Sally Mid Back Chair with wide back rest and arm rest, adjustable lumbar support, Ergonomic seat cushion of dimension of 756mm(W) x 885mm to 985mm(H) x 756mm(D) with wheels and upholstery knitted fabric and glass filled polyprpylene and as per direction of Engineer-in-charge
10
-
-
Supplying, placing and fixing of 43" 4K LED Smart TV of make LG/Sony/Samsung with Gen5 AI processor 4K with AI brightness and 4K upscaling, magic remote, film maker mode, AI sound system, smart web OS platform, with OTT Apps supported, ALLM, HGIG mode and as per direction of Engineer-in-charge.
1
-
-
Supplying, placing and fixing of Godrej make metal rectangular office table with 5 drawers storage, particle board table top material suitable for office of dimensions Dimensions W x H x D (mm) 1365 x 735 x 680 of rectangular shaped with lock facility and as per direction of Engineer-in-charge
1
-
-
Supplying, placing and fixing of Godrej or Durian make L shaped help desk with a flat linear table top in maple with dark grey sides, with computer tray, computer trolley and 3 drawers of varying proportion with a central locking mechnaism of size: Table Top: 1500'(L)x600'(W)x750(H), Side unit: 900'(L)x450(W)x750(H), and as per direction of Engineer-in-charge
1
-
-
Supplying, placing and fixing of Godrej make Brawn 6 seater Dining table set with Tempered Glass Top of size 1349mm(L)x749mm(H)x800mm(W) of rectangular shaped with 6 M.S chairs of size 450mmx988mmx518mm with leather upholstery and cushion including cost of all materials and as per direction of Engineer-in-charge
1
-
-
Supplying and placing of Nilkamal MAGIC IRON BLACK plastic chair with arm rest stackable texture finish 1 seater of dimesnions 570 (W) 607(D) 900 (H)and as per direction of Engineer-in-charge
20
-
-
Supplying, placing and installing White And Gray Godrej Glass double Door Storwel Almirah/ Bookshelf of Iron and glass material with Brass levers lock, handles , standard grade enamel paint coating is oven dried under controlled temperature to avert damaging effects of scratch, ccessible with 10 types of separate lockers, of dimesnions 914 mm (W), 320 mm (D), 947 mm (H), and as per the direction of Engineer-in-charge
1
-
-
Supplying, placing and installing high quality engineered wood Godrej make Vurv Queen Size Bed of Dimensions W x H x D (mm) 1584 x 880 x 2135 and as per direction of Engineer-in-charge
1
-
-
Supplying, placing and installing high quality Kurl-on/ sleepwell make mattress of 78"x60"x5" pure coir Str 8 with 2 set polyster fibre pillows of 600 mmX 400 mm and as per direction of Engineer-in-charge
1
-
-
Supplying, placing and installing Godrej make, 4 full Shelves Iron Office Cupboard - Godrej Minor Plain of dimensions 765 mm (W) x 440 mm (D) x 1270 mm (H), 3 hinged double door Powder coated CRCA Sheet, and 3 Way bolting device and 6 lever lock safety, CRCA steel certified as per direction of Engineer-in-charge
1
-
-
Supplying, placing and installing Nilkamal Magna 15 Personal Locker of dimensions Width (mm) 905, Depth (mm) 400, Height (mm) 1850, Door made of 0.8 mm thick (22 Gauge) Powder coated CRCA Sheet, Body, Back & Shelves made of 0.6 mm thick (24 Gauge) Powder coated CRCA sheet, Locking facility available with a duplicate key Total 15 numbers of individual lockers, as per direction of Engineer-in-charge
1
-
-
Supplying, placing and installing Regular Steel (Magnetic) Whiteboard for Office, Home & School , Lightweight Aluminium Frame, Resin Coated Steel Writing Surface, Alloy Aluminium (6063-T6 Frame), Paper Honeycomb Core & Virgin ABS Corners 3x4 Feet, with Alloy Steel Folding Easel Stand 5 feet for White Board (Can Hold Upto 3X4 Feet Whiteboards) with dimension 600D x 900W x 1500H mm as direction of Engineer-in-charge
1
-
-
Supplying, placing and installing Kent R/O+UV standalone Water Purifier System (Kent, Model Cristal Plus), 11 L Storage capacity, Multiple purification by RO+UF+TDS controller, UV LED protection in storage tank and all other ancillary works
1
-
-
Supplying, placing and installing and all other ancillary works for SITC of ISI marked (IS:2878) Fire Extinguisher, ABC type capacity 6 Kg. with all accessories. (Eversafe/Fire Shield)
4
-
-
Supplying, placing and installing metal body high accuracy electronic weighing balance machine of 20KG capacity with Front and Pole Double Display (Red) SS weighing pan and poer back up features
1
-
-
Supply, installation and commissioning of CCTV cameras with follwing items: a) Cat6 outdoor/ indoor cable make Dlink/cp cplu/ digisol of necessary quantity
b) CP PLUS 8MP IR Network Bullet Outdoor Camera|3.6mm Lens |Max. 8MP (3840 × 2160)@15fps |IR Range of 30 Mtrs, IP67, PoE |DWDR, Day/Night(ICR) and Support Built-in Mic - CP-UNC-TA81L3C (6 nos.)
c) CP PLUS PTZ Camera 4K Outdoor/Indoor Speed Dome 100 Mtr. CP-UNP-D2521L10-DP Compatible with J.K.Vision BNC (1 no.)
d) CP Plus 4mp IP Dome 3.6mm CP-UNC-DS41ML3- indoor (2 nos.)
e) TP-Link VIGI NVR1016H VIGI 16 Channel Network Video Recorder | H.265+ | 24/7 Continuous Recording | Real-Time Live View | Remote Monitoring | ONVIF | Two-Way Audio CCTV (1 no.)
f) LG 22 inch (55cm) IPS Monitor - Full HD, IPS Panel with VGA, HDMI, DVI, Audio Out Ports - 22MP68VQ (1 no.) all other ancillary works and accessories including fittings Demo of the system as per direction of Engineer-in-charge
1
-
-
Supply, installation and commissioning of All-in-One 12th Gen Intel Core i7-27inch(68.6 cm) 16GB RAM/1TB SSD/FHD/Intel UHD Graphics/B&O Audio/Camera/Keyboard/Mouse/Widows 11OS/Licensed MS Office facility of HP/DELL or equivalent type of approved make Personal Computer system and all other ancillary works and accessories including Demo of the system as per direction of Engineer-in-charge
1
-
-
Supply, installation of Nilkamal Freedom Mini 18 (FMSC18) Plastic Shoe Cabinet - Sandy Brown/Dark Brown, of dimension Width (mm) 595, Depth (mm) 355, Height (mm) 1230, as per of Engineer-in-charge
2
-
-
Supply, installation and commissioning of color laser printer and b/w printer cum xerox and scanner of of HP/Cannon/Epson make printer system and all other ancillary works and accessories, connectivity including Demo of the system as per direction of Engineer-in-charge
1
-
-
Supply, installation of Havells make 8W bamboo landscape light LED IP65 Luminaire, 1 metre height with switching system etc.and all other ancillary works as per direction of Engineer-in-charge
25
-
-
Laying of one number PVC insulated and PVC seathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25 sqmm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
100
-
-
Supply, installation of Adjustable Waterproof Outdoor Garden LED Spot Light of 5 Watt, Warm White, Yellow, Green, Red-Metal body with internal underground wiring, switching system etc.and all other ancillary works in park & gym premise as per direction of Engineer-in-charge
5
-
-
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm with lock gate facility in park and Gym area as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
50
-
-
SIGNAGES
Supply, installation of Stainless body frame acrylic, high visibility, weather resistant square display board with fixing in concrete base and all other ancilliary works and fittings with size 3' x 2' as per direction of Engineer-in-charge Total no. 4 nos.
24
-
-
Supply, installation of Stainless sign boards of high quality vinyl boanded gloss laminated multi colour ( Blue, Green - White) wall mounted rectangular shape of 1.5' x 1.5' having thickness of 3 mm with appropriate signage and all other ancillary works and fittings as per direction of Engineer-in-charge . Total 10 nos.
22.5
-
-
Supply, installation of Stainless sign boards of high quality vinyl boanded gloss laminated multi colour ( Blue, Green - White) wall mounted rectangular shape of 1.5' x 1' having thickness of 3 mm with appropriate signage and all other ancillary works and fittings as per direction of Engineer-in-charge . Total 5 nos.
7.5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements