Municipal Bodies Tender

Brick work with Fly Ash Brick having crossing strength between 100kg/cm2 to149kg/cm2 in C.M.( 1:4) in foundation and plinth.

RC.C. M20 grade using 20mm and down graded size chips including cost conveyance etc. complete.

RCC column and beam

lintel

roof slab

side drain

Supplying fiting fixing and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification

Brick wok with Fly Ash Brick having crossing strength between 100kg/cm2 to149kg/cm2 in C.M.(1:4) in super structure

mm. thick cement plastering (1:3) over brickwork. Inner Plaster work

16mm. thick cement plastering (1:6) for brick masonry work Outer plaster work

6mm. thick cement plastering(1:4) with slurry treatment to R.C.C surface ceiling and roof plaster work

Filling in foundation and plinth with excavated materials including watering ramming etc complete

Fixing Tiles in Floor, treads or steps on 25mm thick bedof C.M. (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tile including rubbing & polishing including cost of precast tiles.

chequred tiles

Fixing Wall Tiles in dadoos skirting & riser of step on12mm thick C.P 1:3 jointed with neat cement slury mixed with with pigment to match the shades of the tile including rubbing & polishing including cost of all etc complete

Iron work wrought & put up in trusses as per direction of Engineer-in -charge including cost of all labour, T & P, cost of all materials required for the work.

Supplying fitting fixing of Aluminium door with OEL anodized Al.door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member & 6mm.thick plain black glass in top portion with 12mm. thick prelaminated board in bottom portion fixed on door frame by means of tappered clip No.4660 & the frame the frames to be ompleted by means of jointing angle No.-1855 including cost of all labour, T & P, hire charges of Drilling machine etc. complete.

Finishing the plastered surface of walls with Acrylic wall Putty (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding, staging charges with cost of all materials, taxes, labour, T & P etc. complete.

Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 20mm thick cicular pipe with Balustrade of size 32mm x 32mm x 2mm. @ 0.90mtr. CIG and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all material, labour, T&P etc. required for the complete in all respect.

Painting two coats with any approved paint on new wood /Iron work

Dismatiling brick or stone masonry in cement mortar under 3m. Height including stacking the useful materials for reuse and removing the debries within 5Om. Lead.

Rigid & smooth centering & shuttring for RCC works including false work & dismentling them after casting incuding cost of materials complete

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 s sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/ Polycab/HAVELLS/RR KABLE/KEl or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type |(anti bactorial & falme etradant type) switch ISI marked Make-Schneider (Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- |Anchor/Havells of modular type G.l box with metallic cover plate (both side)|(anti bactorial & falme retradant type) Make-Schneider (Zencelo)/legrand (Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. Al the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

Recess wiring for circuit/submain wiring with the following mentioned size PVC FRILSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make |A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & |Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials a)2 X 1.5sq.mm +1 X 1.5sqmm (1.8.2.SOR-17)

b 2x6 + 1x2.5 (SM-21)

S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.

S/F.of 9W/10Wt.LED lamps of Havels/ Crompton make.

S/F of 20W/18W LED batten light of crompton/Havells make.

Supply and fixing of Single pole and Neutral (SP&N) 5Amp to 32A rating 240V "B"series MCB suitable for lighting and other loads. of the following poles in the exitingl MCB DB ISI marked complete with connections testing and commissioning etc. as required. (make-HPL/ Havells/ Legrand /L&T/C&S)

Supply ,installation, testing and commissioning of main switches (1S 13940 part-3/1993 ) of 32Amp ICDP main switch with M.S board on existing surface/wall mounting and completer with HRC fuse links, interconnections, HPL/ Anchot/ (Make-Seimens/required earthing etc. as L&T/Havells/C&S/RK),

S/F of MCB 4 way double door

S/E of 300mm metal exhaust fan with wall cutting masonary work including all acessories of Usha aeroclean/ Bajaj Bahar/ Crompton or equivalent make and connection as per direction of EIC