Municipal Bodies Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,46,914Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_ORULB_68328_1Bid Award Id
ViewTender No
1/PKDM-2021-22Tender Authority
Municipal Bodies ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
582.7
-
110.94
P.C.C(1:4:8) WITH 4CM Hand Broken metal including all cost, convenience, royalty and taxes etc, complete to work, as per specification approved by the dept.
145.89
-
3592.88
R.R. stone masonary with C.M. (1:6 ) with all cost , conveyance, etc. complete
58
-
3146.35
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Each Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips Each Not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as per specification and direction of Engineer-in-charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. The rate includes centering and shuttering & necessary scaffolding.
-
-
-
Columns - Ground Floor
37.12
-
10472.62
First Floor
7.32
-
11447.88
Second Floor
0.94
-
12852.44
Column Base
163.2
-
4783.85
Plinth Beam
34.71
-
5043.02
Lintel
3.61
-
8371.5
First floor
1.23
-
8801.63
Chajja
15.19
-
764.62
First floor
3.79
-
822.87
Roof beam
31.26
-
10472.62
First floor
10.28
-
11447.88
Roof slab
84.76
-
8949.64
2nd floor
26.65
-
9479.18
Staircase & Ramp
8.55
-
10576.65
First floor
1.62
-
11598.77
Drain
65.48
-
5043.02
Providing, fixing and placing of Tor steel (HYSD) Fe-500 ,545 IS 1786-2008 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and Each Each No separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
402.86
-
7708.19
Fly ash brick masonry in c.m. (1:6) insuperstructure using (23 x 11 x 8)cm. nominal size fly ash bricks having crushing strength not less than 75Kg/cm2 etc. including cost, conveyance, royalites and taxes of all materials and labour with T&P etc. required for the work complete.
-
-
-
Boundary wall (Plinth beam)
451.31
-
3993
First Floor
81.81
-
4474
Second Floor
23.3
-
5028
16 mm (5/8") thick cement plaster (1:6) over brick or stone masonry including punning.
-
-
-
Ground Floor
1529.02
-
190
First Floor
206.52
-
195
12 mm thick cement plaster (1:6) for brick works.
-
-
-
Ground floor
2175.96
-
133.15
First Floor
455.47
-
136
Providing, fitting and fixing fully glazed UPVC (2/3 Tracks) Doors/window/ventilators with necessery fittings,fixtures and hardwares like concealed locks,handeles, etc., glazed with 5mm thick tougheed glass from saint gobain without ay surface deformation, with sun reflective film,as pre drawing and design,ad fixed to the walls or columns with lugs in cement concrete 1:2:4 cutting holes and mending good to all damages, including filling gap if any, between the frames walls/columns, with best quility sealant,includig cost of all materials,labour,conveyance,royalities,scaffolding,sundries,tools and plants,etc., but exculding GST, complete as per the direction of the Engineering-in-charge.
-
-
-
Window
64.02
-
5984
Door
72.73
-
8963
Supplying M.S. Grill Jalli & windows made out of angle,flat and square bar including cost of transportation, taxes etc.all complete. As per approved design and Direction of Engineer - In- Charge. (provisional rate.)
1611.7
-
77
SS Railing Supplying, fixing, fitting of Stainless steel of 304 grade in hand using 50 mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C & stainless square pipe bracing of 32mm x 32mm x 2mm along the edge of the lakefront as per the approved design & specification, buffing polishing etc. with cost, conveyance, taxes of all materials, laour, T&P etc.
26.4
-
3460.5
Finishing wall surface with cement based wall putty & making smooth to receive painting. (Data for 10 sqm)
3559.2
-
71.38
Wall Painting 2 coats to internal surface of walls with 1st quality Acryalic Emulsion paint (Plastic Emulsion Paint) over 1 coat of water based primer of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.(Data for 10 sqm)
3559.2
-
138.67
Wall Painting 2 coats to External surface of walls with 1st quality Acryalic Emulsion Weather coat paint over 1 coat of water based primer of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.(Data for 10 sqm)
2160.25
-
132.16
Priming one coat with any approved primer including cost of primer for Steel work.
156.35
-
54.2
Painting two coat with any approved paint including cost of paint
156.35
-
135.89
Supplying, Fitting and fixing of Virtrified Tile Flooring, walling and dados wherever required of size 600x 600/600X1200mm of approved shade and make with application of polimer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour and T& P.
747.48
-
1271.7
Flooring with Vitrified Industrial Anti skid Vitrified floor tiles of premium grade having thickness of 8 to 10mm conforming to IS:4457 of size (300mm x 300 mm)
190.8
-
973.5
Supplying, Fitting and fixing of Ceramic difital wall tiles, walling for toilets and dados wherever required of size 300x 300mm of approved shade and make with application of polimer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour and T& P.
338.4
-
1048.8
Providing 20mm thick granite tile flooring (above 0.4 sqm .) of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.
336.55
-
1799.1
Marble tiles 16mm thick (dunguri variety)
390
-
1215.9
Landscping & Other Equipments - Concrete paver blocks forrequired strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:
Stone-finished High Strength Pavers 60mm
2475
-
960
Supplying of approved good quality cow dung/ goat dung manure well decomposed garbage-free including loading, unloading and delivery at site with all leads and lifts including cost of all labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge
160
-
694
Lifting & spreading of manure uniformly including cost of labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge. Hoeing of soil & manure spreaded for smooth mixing in the upper surface & leveling dressing for grassing the area including cost of labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge.
160
-
55
Development of Lawn including cleaning area of weeds, debris, etc. watering profusely for weed growth and removing the same, excavation with hand operated tools to depth of 450mm, grading as specified in drawing, continuous weeding, spreading good quality soil and FYM mix up to 500mm depth in layers of 100mm and watering for compaction, rolling with hand-roller, planting of lawn, watering regularly including supply of necessary labor and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including cost of supplying lawn of specified type – Cynadon dactylon, Stenetophrum, Paspalum, etc. including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete.
1650
-
200
Design, supply & installation of modern automated irrigation system including all material & equipment like sprinklers, bubblers, drip lines & points, pressure pump, automation equipment, sensors, etc. including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete.
1650
-
140
Supply & planting Trees - saplings, well developed, (min 3.0m high on full growth), well branched crown, well developed, in 12" pot or polybag, disease free and Development of Trees including digging of pits, pre-treating pits with anti-termite insecticide, spreading excavated earth around pits, filling good quality soil and FYM mix, and planting each plant including supply of necessary labor and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant (Pit size 1500 x 1500 x 1500mm) including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete.
30
-
500
Supply & Planting of Shrubs - saplings, Flowers Plants well developed, min. 0.6m high, well branched, preferably in bloom, in polybag of 30x20cm size, disease free and development including excavation up to 450mm deep, spreading good quality soil and FYM mix, continuous weeding operations, pre-treating area with anti-termite insecticide, planting of plants as specified in drawings including supply of necessary labor and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant, including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete.
350
-
190
S/F fixing of FRP PLASTIC BODY MADE SITTING SHIVA STATUE OF 10 FT IN HEIGHT AND 6FT IN WIDTH AND 2.5FT IN DEPTH.
1
-
285000
S/F fixing of Three Seater Designer Bench. Providing and fixing in position 3 seaters Designer Bench of approved design and make of minimum area 1.5 meter x 0.60meter. Overall all minimum height 0.80 m consisting of 1. FRP Channel Strip-seat & back with end cap- (C - Section of thickness upto 5mm ,1200mm long with wooden finish bolted to side frames.)
2. BENCH FRAME (cast iron designer frame conforming to IS 1730 made from sand casting method)
5
-
17500
S/F fixing of PPGI ROOF TILE MODEL GAZEBO of 5M x 5M SIZE . Providing and fixing in position PPGI GAZEBO of 5M x 5M of approved design by Architect. Overall all minimum height 2.4 meter consisting of a. 8 nos. of poles made of GI pipe of 50 NB dia. fixed at 8 corners of the GAZEBO. The structural frame of the GAZEBO is made of MS square pipe frame of 32 mm.
b. The Chute of the GAZEBO roof is made of PPGI ROOFING SHEET OF 0.5mm thickness in the shape of Pyramid. The roof of the gazebo is having a surface mounted LED panel light for illumination. c. It shall have 4 nos of FRP Chairs where 8 persons can accomodate and 1 FRP Centre Table.
3
-
125000
Designing, providing and Fixing of Fibre Reinforced Plastic Sheet of Cladding Entrance Arch Gates and Support Framing Using M.S Pipe and Angle Frame work as per the design provided by Architect. Bothsides texture should be Stone Finishes in the entire part and properly it has to be maintained and also it should withstand the wind speed of 250km/hour. Including all Structurals, Foundations, and taxes, transport and all complete. etc
1
-
125000
Pergola Providing and fixing free standing Desired shapes provided by Architect with 150x150mm square spaped G.I pipes Pergola with 2 coats of Yellow oxide painting and of 3 coats of SPraying of brown colour at desired locatons. The Pergolas need to be Fitted with proper foundation and with Anchor and Bolt system. The Pergolas Need to be Lit and fitted with Waterproof RGB strip lights. The amplifier also need to be fitted with it. Installation should be as per the pattern apporved by the Engineer in Charge.
8
-
11600
Construction of cement concrete kerb with top and bottom width 115 and 165mm respectively, 250mm high in M-25 grade PCC on M-10 grade foundation 150mm thick, foundation having 50mm projection beyond kerb stone, pre-cast kerb stone and foundation concrete laid manually, all completed as per clause No. 408 of MORT&H specifications for Road & Bridge works (Latest Revision) and as per direction of the Engineer
=4x115
1020
-
250
PH, PPlumbing & Sanitary - Providing all materials, labour, T&P for laying/fixing of following dia
CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge.
Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
20mm dia
50
-
228
25mm dia
40
-
306
32mm dia
10
-
441
Providing all materials, labour, T&P for laying/fixing of following dia
uPVC pipes as per IS-4985 with ISI mark including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge.
Make: ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
75 mm dia
100
-
286
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete as per direction of Engineer-in-charge.
-
-
-
25mm dia brass ball valve
10
-
1055.1
32mm dia brass ball valve
5
-
1544.2
40mm dia brass ball valve
5
-
2098.9
Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC.
60
-
181.3
Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
For Pipe to pass in 125mm to 230mm thick wall
20
-
46.4
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitrous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making jgood the walls and floors wherever required.
-
-
-
Vitreous china pedestal type water closet, white plastic seat (solid) with lid C.P. Brass hinges and rubber buffers & vitreous china 10 liters low level cistern with fittings (REF:JAQUAR, OPS-WHT-15751P180UF)
8
-
12716
Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin with half pedestal of approved make as per IS-2556 with ISI mark in all floor with supply & fixing of basin bolts & Nut of approved quality including cutting the walls & floor and making good the damages including testing with all taxes, duties, transportation etc. all complete as per specification & direction of EIC.
-
-
-
Full pedestal wash basin (IF Jagwar, FLS-WHT-5801)
10
-
8173
Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin with half pedestal of approved make as per IS-2556 with ISI mark in all floor with supply & fixing of basin bolts & Nut of approved quality including cutting the walls & floor and making good the damages including testing with all taxes, duties, transportation etc. all complete as per specification & direction of EIC.
-
-
-
Porcelin flat back stall type magnum urinal
5
-
6574
Providing all materials, labour, T&P for fixing of following sizes of
bevelled edge mirror of 5mm thick mounted on 4mm thick AC sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.
Make-Saint gobain
Jaquar URS-WHT-13257 or Approved Equivalent Model from :
JAQUAR/HINDWARE/CERA
-
-
-
600mm x 450mm size
10
-
1337
Providing all materials, labour,T&P and fittings and fixing of different
water supply (CP on Brass) fitting (Quarter Turn) as per IS
specification & approved make in all floor of following sizes and
specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-incharge.Make:Jaquar/Hindware/Cera
-
-
-
15mm dia Angle Stop cock with wall flange Jaquar-KUP-35053PM
26
-
1818
15mm dia Pillar cock Jaquar-KUP-35001PM
10
-
1616
C.P. Soap Dish Holder Jaquar-AKP-35731P
10
-
230
Health Faucet Jaquar-ALD-573
8
-
1731
Supply all materials, labour, T&P, fitting and fixing of uPVC SWR
(Ringfit) Pipes (Type-A) of approved make confirming to IS13592/1992 with ISI mark, both below & above ground level or fixing on wall surface in all floors including excavation of earth work in all kinds of soil & necessary back filling or required scaffolding with all taxes, duties, transportation including testing etc. all complete as per specification & direction of the
EIC.Make:ASTRAL/ASHRIVAD/AJAYA/ SUPREME
-
-
-
110 mm dia pipe
40
-
233.5
75mm Dia pipe
30
-
286
Providing all materials, labour, T&P for fitting and fixing of following
size of 12mm thick toughened glass for urinal partition of approved
make in all floor with edge moulding & polishing with chromium plated brass screws, G/W brackets 90° (Double Sided Back Plate) of DORMA make with all taxes, duties, transportation etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
Toughened glass partition of Size-1200mm ht. x 600mm width for
Urinal Partition
5
-
3125
Providing and fixing square-mouth S.W. Gully trap class SP-1 complete with C.I. Grating brick masonary chamber with water tight C.I. Cover with frame of 300x300 MM Size (inside) the weight of cover to be notless than 4.50 kg and frame to be not less than 2.70 kg as per standard design
-
-
-
Inner size 300mmx300mmx450mm depth gully trap chamber
10
-
1570
Providing, fitting, fixing including testing & commissioning of
following capacity polyethylene moulded water storage cylindrical tank with lid & locking arrangement as per IS-12701/1996 with ISI mark including cutting holes of required size & shape. Providing, fitting and fixing of CPVC water tank connector / Adaptor with jam nut etc. for filling, delivery, overflow & wash out arrangements, including hoisting upto a height of 10 mtr. above the ground level & placing the tank of required position including construction of brick masonry pedestal up to 450mm ht. from roof with RCC (M-20) base slab, beam of approved design & 125mm thick brick masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm C.P. 1:4 over brick work etc. all complete as per specification & direction of EIC.
(Make-Sintex/supreme)
-
-
-
2000 Ltr. Capacity
6
-
21983.15
Providing all materials required for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:6), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 100mm thick, 12mm thick cement plaster 1:4 & 1:6 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame (SFRC medium duty) for opening of 500mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
Inside dimension 600 x 850mm x 450mm for line with three or more inlets
4
-
5732
Labour for drilling a perfectly vertical bore hole for a specified dia
for a specified depth below G.L through consolidated and unconsolidated rocks with down the hole hammer drilling rig or
combination drilling rig (1200 cfm/ 300 psi) as required to suit the
site condition as per the direction of EIC including use of own rigs
with its accessories, T&P & consumables etc. for lowering of
150mm dia PVC/GI pipes for housing fitted with socket and with
or without well screen as per the necessity for soft, medium, hard
and boulder formation (GI/ PVC casing pipes, if required to
prevent collapse of over burden is to be provided by the contractor
including lowering and withdrawing after completion of the Tube
Well).
-
-
-
Labour for drilling of 8" dia bore from '0' mtr. to '100' mtr.
100
-
677
Providing & lowering the following size PVC pipes (ASTM) with
or without slotted pipes as per the necessity from 1.00m above
ground level up to required depth and fitting and fixing up in
perfectly vertical position, including cutting, threading pipe and
slotted pipe and supplying and fixing all jointing materials, T&P
etc. complete and keeping the top of the casing pipe threaded
including plugging the tube well to prevent entry of foreign
materials from above. The cost inclusive of pipes, fittings, labour,
consumables, POL, consumables with hire & running charges of
machinaries etc. as per specification & direction of EIC.
-
-
-
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per
ASTM-D-1785/2004 upto required depth.
30
-
1566.34
Cleaning and developing the tube well using their own compressor
continuously worked till clear and adequate discharge is obtained
from the tube well including supply and use of all necessary
equipment, labour, all consumables, running & hire charges of
machinaries etc. all complete as per the direction of the EIC.
1
-
4445
Supplying of submerssible pump with accessories as detailed below for commisioning of production well.
-
-
-
1.52HP to 2HP pump set, Vertical submersible pum as per site conditions
1
-
25000
DOL control panel (as required)
1
-
4150
45qm submersible cable of reputed make likeBCH/ANCHOR/POLYCAB etc
50
-
148
50mm di steel ss niple piece (as required)
2
-
490
Steel rope with cover (as required)
30
-
26.7
Well cap (200mm M.S)
1
-
700
50MM size C.I. Bracket (as required)
2
-
91.3
63mm HDPE pipe PN10
70
-
217.75
32mm HDPE pipe PN 10
70
-
134.6
M.S. 50mm size bore holding clamp
1
-
300
50mm dia brass fullway valve
2
-
2922.8
Steel Nult bolt
8
-
53.8
100AMP main switch wit M.S. Frame and nut bolt
1
-
4200
Supplying, and installation of floor standing RO Water purifier cum cooler having purification capacity Up to 25L/hr, Inlet Water Pressure (Min) of 0.3kg/cm 2, Storage Capacity of 20Ltrs. Cooling Capacity (±5%) 755BTU/hr, including cost, conveyance, taxes etc. complete as per manufacturer's specification or as directed by Engineer-in-Charge.
1
-
32500
Supplying all materials, labour & T.P. For construction of soak pit of size 1.2m dia x 2.55mt deep with dry brick wall of upto 2.10mt height and brick work with cement mortar (1:6) for 0.45mt height of wall at top C.P(1:3) and dry brick khoa of 50mm to 100mm size covered with 40mm RCC perforated slab with necessory fittings including earthwork and all complete.
2
-
15000
Internal & External Electrification - Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable etc. as required.
-
-
-
Group C
100
-
990
Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
80
-
146
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
100
-
167
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
60
-
200
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
50
-
308
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
20
-
394
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
1 Pair
40
-
19
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
40
-
84
25 mm
10
-
90
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
100 mm X 100 mm X 60 mm deep
10
-
160
180 mm X 100 mm X 60 mm deep
10
-
183
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
Telephone socket outlet
3
-
119
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
32
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75 mmX75 mm)
3
-
243
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
3
-
114
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
20
-
401
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing
and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
10
-
495
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
1
-
92
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including
connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
82
-
168
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball
and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
-
358
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
20
-
171
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
10
-
363
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
10
-
168
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
-
-
-
4 way (4 + 12), Double door
3
-
3068
6 way (4 + 18), Double door
1
-
3693
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
40
-
199
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
18
-
657.9
40 A
19
-
830.2
CABLE TRAYS- Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling/wall with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
15
-
621
EARTHING- Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
10
-
6216
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
4
-
11974
Providing and fixing 50 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required.
40
-
400
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
25
-
1844
LIGHTNING CONDUCTOR - Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
4
-
448
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
10
-
104
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
30
-
163
MV CABLE LAYING - Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground
including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
Upto 35 sq. mm
120
-
323
Above 185 sq. mm and upto 400 sq. mm
40
-
396
MV CABLE JOINTING & END TERMINATION - Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1
kV grade as required.
-
-
-
4 X 10 sq. mm (25 mm)
20
-
219
4 X 16 sq. mm (28mm)
6
-
250
3½ X 400 sq. mm (82mm)
4
-
1209
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required
-
-
-
50 mm dia
10
-
536
100 mm dia
5
-
1113
MAIN LT PANEL - A) Supply, installation, testing and commissioning of free standing, floor mounted indoor type, air insulated, totally enclosed vermin proof, dead front, compartmentalised, cubicle type, 2 mm thick sheet steel enclosure panel suitable for use on 415 V, 3 Ph.,4 wire, 50 Hz. A.C. system, incoming circuit breaker/ S F unit, high conductivity 4Pole electrolytic grade AL bus bar, extended bus bars for cable connection, outgoing circuit breakers instrumental panel, C.Ts, outgoing feeder terminals and incoming cable compartment. The incoming and outgoing functional units shall be arranged in multi tier formation to provide a compact panel. Each unit shall be accommodated in a totally separate compartment having gasketted hinged doo with locking arrangement. The Panel shall be complete with switches/circuit breakers of following ratings, interconnection, G.I. earth bus bar of adequate size covering the total length of switch board with drilled holes, G.I. bolts, nuts, washers etc. The cubicle should be of power coated painting after necessary acid treatment. The complete fabrication, construction shall be done as per the detailed specification and conforming to the relevant IS. Short circuit interrupting current of all MCBs should be of 10 KA minimum. Name plate of Panels/DBs Danger Board, incoming and outgoing feeders with Ampere rating of switches/ MCCB/ MCB etc. are to be fixed up on front door above or below the respective switches. Approval of Manufacturer's drawings from Consultant/Employer is required before commencing manufacture and panel should be tested in the presence of Consultant/ Employer's engineer at manufacturer's premises before dispatch to site.
B) The MIP consists of the following : Incoming : 400A 4P,50KA, MCCB, Microprocessor base(relay 160-400A) - 2nos. C) Auto Transfer Switch (ATS): 415 V 400A 4pole Motorised change over switch with automatic transfer controller (ATC) for motorised change over with wire harness. - 1 no. (L&T) 600A four pole Al bus bar with heat shirnk pvc colour tube insulated with DMC bus support - 1 set Multifunction meter(Converz previously Enercon) L&T - 2nos, 400/5A CT's - 2 nos. 6 nos. indicating lamp & 2A SP MCB - 6 NOS.
D) Outgoing : 160A 4P,36KA, MCCB, Thermal Magnetic(relay range 108 - 160A) - 4nos. 125A 4P,36KA, MCCB, Thermal Magnetic(relay range 84 - 125A) - 3nos. 63A 4P MCB(10KA) - 3nos. 40A 4P MCB(10KA) - 6nos. E) GI EARTH BUS BAR 50 mm x 6 mm covering the total length of panel. (All electrical components make L&T)
1
-
429039
H.T. PANEL BOARD. Supply, Installation, testing & commissioning of single panel 11 KV HT Gear, 1no 630 A Incoming cum outgoing drawout type, indoor VCB for the use in 11.0KV. 3- phase, 50 Hz. A.C. with rupturing capacity 350 MVA, complete with copper busbars of suitable capacity, isolator with mechanical tripping arrangement, protective Relays, cable end box for terminating XLPE cable, Ammeter with selector switch. the breaker shall also have 11 KV/R-3/110 Volt/R-3 3 phase potential transformer with fuses and voltmeter with selector switch and 30/5 Amp CT. The feeder shall have O/C & E/F protection with insl. element (type CDG-61 or equvalent). the switch board should be totally enclosed dust, drip vermin proof and ventilated tropical condition and shall be mounted on floor with earthing attachment system and making all connection, checking all instruments, including all charges, civil foundatior work, bolts, nuts, etc. complete as required, etc. complete as required, conforming to IS:2516/1980. Make : ABB / AVIVA / SCHNEIDER.
1
-
396750
POWER TRANSFORMER - Supply. Installation, Testing & Commissioning of 250 KVA, Out-door Oil type, natural cooled, 11000/433 Volt no-load ratio step-down delta/star Power Transformer complete with fitting and accessories e.g temperature controller and others as per specification, including mounting of loose accessories, including supply & grouting of bolts on pedestal fixing of transformer after leveling, fitting of all brought out component, making necessary connection etc. complete as required. Make : ABB / VOLT AMP / SCHNEIDER.
1
-
379500
Diesel Generating Set: Supplying, Transportation & Installation of Diesel Generating Set of capacity 250 KVA at 0.8PF,415v,3ph 4wire,50Hz, complete with water cooled type radiator Diesel engine capable of developing 396 BHP at 1500 RPM, base frame, self starting devices, battery & battery charger, diesel tank, silencer,engine and control panel , AVM rubber footing s including supplying and installing piping and other relevent accessories, also including approx. 3m long 150mm dia exhaust pipe with necessary bend and rain protection cover as required. Make : KOEL / CATTER PILLER / VOLVO PENTA.
1
-
937250
AMF PANEL: Supplying, Transportation, Installation & commisioning Auto Mains Failure (AMF) panel suitable for operation of 250KVA DG set with single break arrengement including control cable, connection as required. The panel component should be housed in suitable size, 2mm thick MS sheet with powder coating painting complete with multifunction meter, idicating lamps, test PB, battery etc. as required.(All electrical equipment make should be L&T ) Make : KOEL / CATTER PILLER / VOLVO PENTA.
1
-
143750
AUTOMATIC POWER FACTOR CORRECTION(APFC) PANEL(90KVAR)
Supply, Installation of wall/floor mounted Automatic Power Factor Correction Panel suitable for 90KVAR,415V ,3ph, 4wire AC supply system made by 2mm the. CRCA sheet steel with separate compartments for heavy duty Capacitor including TPN AL bus bars interconnection with PVC insulated cu strep/wire, cable sockets with nuts, bolts ferrules earthing terminals and GI earth bus, gland plate danger plate. lifting lugs, LED indicating lamps HRC control fuse units, powder coated painting. The panel shall have future provision for extension and complete with nuts bolts etc. minor civil work with materials and comprise of the following: Incommer:- 1nos 160A FP adjustable MCCB of 35KA with terminals and R.O.H , 1 set- Metering unit(suitable rating Ammeter,Voltmeter,VSS,ASS, 150/5A CT's,cntrol HRC Fuse, Indicating LaMPS ETC., 1N0- 8 STAGE APFC Relay., Bus Bar-200A, 4strip AL bus bars of size 40mmx5mm with heat shrinkable PVC sleeve outgoing: 40A TP MCB with 25KVAR duty 3PH contactor & 25KVAR heavy duty 3ph capacitor bank & ON OFF push button & on indicating lamp - 2set. 32A TP MCB with 12.5KVAR duty 3PH contactor & 10KVAR heavy duty 3ph capacitor bank & ON OFF push button & on indicating lamp - 4set. 40A TP MCB - Spare 1no. 32A TP MCB - Spare 1no. ON OFF PUSH BUTTON - 2SET. SPARE Indicating ON lamp - 2nos. Spare Earth Bus: 25x6mm GI earth strip run through out the length of the panel
1
-
200000
LT Panel for Pump
Incoming : 1 Nos.415 V 63 A 4pole MCB(10KA) 1 No. 0 - 500 V, 96 mm square Voltmeter with Voltmeter selector switch (4 positions - 3 way and off) & 3nos. protective fuse and 1 sets of 3 Nos. Phase Indicating lamp, 230 V with 3nos fuse for each set PVC SLEEVED TPN ELECTROLYTIC GRADE ALUMINIUM BUS BAR : 100A Al Bus Bar in of suitable size Outgoing : 5 nos. 32A 4pole 10KA MCB, GI EARTH BUS BAR 25 mm x 6 mm covering the total length of panel. SUPPLY AND LAYING OF 1.1 KV GRADE PVC INSULATED ARMOURED L.TCABLE
1
-
39220
Supplying, Transportation and delivery at site of 1.1 KV grade XLPE insulated and PVC sheathed armoured aluminium conductor cable of following size conforming of IS:1554 (Part-I) in treanch inclu. Cutting and filling/ in duct/ on surface with saddling/ in concealed manner etc :
-
-
-
4 core 16 sq.mm. PVCA Al. Cable.
10
-
148.65
4core 10 sq.mm. PVCA Al. Cable.
100
-
136.46
3.5core 400 sq.mm. PVCA Al. Cable.
30
-
1805.18
Providing & Fixing following way krone type Telephone junction box in MS enclosure i/c painting as reqd
-
-
-
10 pair JB
1
-
850
Supply,transportation & delivery of 20W, Extruded aluminium batten 4ft LED Tube Complete set (SmartBright model BN021C LED20S PSU CW GR S2 of Phillips or equivalent Crompton/Wipro).
45
-
704.92
Supply , transportation and delivery at site street light LED fitting with pressure die cast Al. housing with heat resistance toughened glass IP 66 protection and optics for uniform distribution with 72 W LED lamp along with acessories / components similar to Crompton Cat no. LST P-72-CDL-M
14
-
18709.25
Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
8
-
1500
Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/Padestal Fan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.
-
-
-
1200mm(48") sweep AC Ceiling Fan complete with downrod/Blade/capacitor/ canopy(Heavy duty)
10
-
2345.77
300mm(12") AC exhaust fan i/c luver (Heavy duty)
3
-
4051.78
225mm(9") AC exhaust fan i/c luver (Heavy duty)
5
-
1593.47
Supplying & Installation of Out door Post Top type luminiar BOLLARD LIGHT OF LIGHTING TECHNOLOGIES including 15w LED lamp metal coat to be installed on prepaired civil foundation i/c grouting necessary bolts and making wiring with 2x1.5sqmm pvc cu wire connection including loop-in loop-out box with clamping and terminal/ fuse inside and wiring the pole complete as reqd.
20
-
13866
Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.
10
-
866
Supply, installation and testing of following MCBs in sheet steel enclosure.
-
-
-
40A, 10KA 4P MCB
1
-
2500
SAFETY EQUIPMENT
-
-
-
Supply and fixing of shock treatment chart with glass and teak wood frame on wall in ODIYA, English and Hindi language.
2
-
500
Supplly and fixing of round bottom Fire bucket made from G.I sheet , 2 gallon capacity, painted white inside and red outside written with letter "FIRE" in black filled with sand, complete with handleand iron hook for hanging.
4
-
300
Supply and fixing of Portable Extinguisher complete in all respect i.e. with 1st charge of refill, mounting bracket, etc. as per IS: 15683.
-
-
-
a) 4.5 Kgs. capacity CO2
4
-
5800
b) 9 ltrs. capacity Foam.
4
-
3200
Supply and fixing of First aid box with all necessary materials and medicine for first aid.
2
-
600
Supply and fixing of 11000 V and 415 V danger plate on wall
2
-
150
Supply and laying of 2 M x 1 M x 12 mm thick rubber mat(ISI) tested upto 11 KV.
2
-
1750
SUPPLY AND LAYING OF 1.1 KV GRADE COPPER CONTROL CABLE
Supply and laying of 1.1 KV grade, 4 core 2.5 sq.mm
PVC insulated, Armoured Cu. Conductor control cable : In existing masonary trench inside the Substation / in pre laid hume pipe / G.I pipe including mending the demages.
20
-
295
END TERMINATION OF 1.1 KV GRADE CONTROL CABLE
Making end termination of above 4 core 2.5 sq.mm PVC insulated Cu.Cond.cable with compression type brass cable gland and crimping type copper sockets complete with all acessories as reqd.
4
-
100
SUPPLY AND LAYING OF 11 KV ( E ) GRADE XLPE CABLE Supply & Laying 3 - core 11 KV, grade XLPE aluminium cable of following sizes through existing covered masonay trench including taking out R.C. covers, setting them in order, filling the trench with the trench with fine dry sand including supply of sand
-
-
-
a) 185 sq.mm
40
-
1655
HV CABLE JOINTING & END TERMINATION supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
-
-
-
185 / 240 sq. mm
3
-
11681
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
-
-
-
185 / 240 sq. mm
1
-
17166
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements