Municipal Bodies Tender

SOUND REFLECTIVE FALSE CEILING-Supply and Installation of 15 mm glassfiber steppe edge Glass fibre core ceiling tile of size 595 x 595 x 15mm having all edges encapsulated with chemical treated paint & having density 100-120 Kgs/ m3, weight 1.5 - 3.0 kg/m2 which is suspended by using 0.3mm thick and 15 mm wide pre coated metal T15/24 grid system. The technical parameters are as follows :Core - Glassfibre, Fire – Class 1 & P , Acoustics – NRC 0.95,Climate (OC RH) – 40, 95,Termite resistance ,Light reflectance – 85 %,Green (RC %) – 35, Hygiene (VoC, Clean room) – Low, Class 3 Strength, Load capacity (Kg) - Antisag. The T15/24 Grid system of 600 x 600 mm module shall include wall angle(WA15) with unequal flanges of size 14 x 20 x3000mm wide, length 3000mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Main T15(MT15W36) having flange width 15mm /24 mm , height 32/38 mm and length 3600mm thickness 0.30 mm from the soffit with help of soffit cleat and wire at 1200mm c/c. Cross T15 (CT15W12) with flange width 15 mm, height 32 mm and length 1200 mm is then interlocked into the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15. Finally Cross T15 (CT15W06) having flange width 15 mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 1200 mm Cross T15 at 1200mm centers and in direction parallel to the Main T15. Anutone Subtex Nubby steppe edge of size 595 x 595 x 15mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind subtex panels are orianted in one direction to achieve uniform shade. .Make:Anutone /Uno Panel/ Oktech Test certificate will be submmited after procurement of materials.

GYPSUM CEILINGGypsum Board false Ceiling: Providing, fabrication and fixing in position of false ceiling at a height of 8 to 10’-0” from floor (or the height will be decided on the spot as per site conditions) by fixing 12 mm Th. Gypsum Board sheets on frame work of GI sheet section. The main runners of 22 gauge GI sheet and cross runners of 24 gauge GI sheet must be framed to form a mesh of 2’0”x2’0” c/c. The Gypsum Board must be fixed to the GI frame and joint to be properly filled in with POP paste and paper tape to get a leveled smooth ceiling. Recessing of the Gypsum Board for light fixtures must be done along with extra frame work of GI sheet section to hold the concealed light fixtures etc. including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling

SOUND ABSORPTIVE SIDE WALL PANELING ABOVE 7" FROM FCLSupply & installation of Anutone pinewood wool magnesia bonded soak fabric cord binary / Triangle design of selected colours (ref colour chart ) kerfs edge fabric wrapped ,pinewood fibers panels of size 600 X 600/ 1200 x 25 mm having density -400 Kg /m3 weight -10 Kg / mt 2 installed by using GI strut system. The GI strut works includes cross channels CC50 having thickness 0.45 mm , length 3600 knurled web 50, depth 50 mm & base 100 mm equal flanges of 13 mm is fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC vinyl core UV treated H - spline having thickness 2 mm & length 2400 mm to be fixed or using Z bar or H spline on the back or edge of panels / tiles & similar on the back of channels perpendicular to the cross channels CC50 at 600mm centers. Kerfed edge fabric wrapped factory panels shall be then inserting into the H - spline against wall to perfect fit. Panels shall be back lined with acoustical infill of anutone Synth PF 5 x 50 mm thick adhered to the wall using stick 7 adhesive. The technical parameters are as follows: core variant - pinewood fibers. Fire class 1 & P Acoustic - NRC 20 mm C10 - 0.85, Climate - OCRH - 50,90 Termite resistance - yes light reflectance - colour dependent, Green RC% - 10 , Hygiene ( Voc ,Clean Room ) - Low , Strength , Load Capacity ( Kg ) - Ball impact ..Make:Anutone /Uno Panel/ OktechTest certificate of the use products shall be submitted after procurement of materials.