Municipal Bodies Tender

Cement concrete M15 grade with crushed granite coarse aggregate of 20 mm down graded mixed in concrete mixture including cost of all materials, machineries and labour with all lead for materials up to the mixing yard and transportation of mixed concrete within all leads, lifts & de-lifts and laying in worksite of concreting, compaction by mechanical means etc. complete in all respect to proper slope and level with all cost, conveyance, royalty & other taxes etc. of all materials complete in all respect as directed by the E.I.C.

Cement concrete M20 grade with crushed granite coarse aggregate of 12 mm size in concrete mixture including cost of all materials ,machineries and labouer with all lead for materials upto the mixing yard and transportation of mixed concrete within initial lead of 50m and laying in dams, barrages,power house and pen stock with all lift/delift upto 1.50m height above average ground level etc. complete in all respect to proper slope & level with all cost, conveyance, royalty & other taes of all materials complete in all respect as directed by the Engineer-in-charge. Foding & Pedessteral

Cement concrete M20 grade with crushed granite coarse aggregate of 12 mm size in concrete mixture including cost of all materials ,machineries and labouer with all lead for materials upto the mixing yard and transportation of mixed concrete within initial lead of 50m and laying in dams, barrages,power house and pen stock with all lift/delift upto 1.50m height above average ground level etc. complete in all respect to proper slope & level with all cost, conveyance, royalty & other taes of all materials complete in all respect as directed by the Engineer-in-charge. Column & Beam

Straightening, cutting, bending, binding and lying the grills as per approved design & placing in position including cost, conveyance of M.S. Rod & binding wire 18 to 20 gauge complete as directed by the Engineer-in-charge (Ground Floor).

Straightening, cutting, bending, binding and lying the grills as per approved design & placing in position including cost, conveyance of M.S. Rod & binding wire 18 to 20 gauge complete as directed by the Engineer-in-charge. (1st Floor)

Providing & removing rigid and smooth centring & shuttering for reinforced cement concrete works including false work and dismentaling the same after casting with supply of all labour & T&P required for the work etc. complete in all respect as directed by the Engineer in Charge.

Providing form work for concrete with F1 finish for upstream faces of dam, spillway, glacis of barrages, un-exposed surfaces of foundation, block joints etc. with steel shutters rigidly fixed and removal of forms and making good to the surfaces where necessary complete with all labour materials and T&P complete as directed by the E.I.C. (A/R-2006, P-35, i-37)

Providing form work for concrete with F1 finish for upstream faces of dam, spillway, glacis of barrages, un-exposed surfaces of foundation, block joints etc. with steel shutters rigidly fixed and removal of forms and making good to the surfaces where necessary complete with all labour materials and T&P complete as directed by the E.I.C. (A/R-2006, P-35, i-37)

Brickwork with Fly Ash bricks (23 Cm. x 11Cm. x 8Cm.) in C.M.(1:6) in superstructure including cost conveyance royality as per the direction of Engineer in Charge. Ground Floor

Brickwork with Fly Ash bricks(23 Cm. x 11Cm. x 8Cm.) in C.M.(1:6) in superstructure including cost conveyance royality as per the direction of Engineer in Charge.

16mm thick cement plaster(1:6) for brick and stone work per sqm. (As Per AR 2014 Item No-14Page -105)

20mm thick cement plaster in cement mortar (1:4) including cost, conveyance, royalty complete in all respect as directed by the Engineer-in-charge.

Fixing Granite Sheet 20mm thick in floors treads on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match shades of the tiles including rubbing and polishing etc. complete as per the direction of E.I.C. (1st Floor)

Providing fitting and fixing of Armstrong accoustical fine fissured RH-99 board 0.55 sound attention 34db suspended celling with Armstrong fine fissured tiles with cost of all charges etc all complete as per the direction of Engineer in Charge.

Providing fitting and fixing of Armstrong accoustical fine fissured RH-99 board 0.55 sound attention 34db suspended celling with Armstrong fine fissured tiles with cost of all charges etc all complete as per the direction of Engineer in Charge.

Finishing surface of walls with Acrylic wall putty of approved make and making smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials, taxes, labour charges, T&P etc. complete in all respect as directed by the E. I. C.(A/R-2006, P-2, i-2)

Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete including cost of laminated board.

Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P including cost of black glass etc complete as per direction of Engineer in Charge.

Finishing walls with two coats of water proofing cement paint or Weather Coat of approved shade including cost of cement paint, cost of all labour T&P required for the work etc. complete as per direction of Engineer In Charge.

Priming One coat on newly plastered surface of walls with any approved primer including cost, conveyance, taxes of all materials and labour charges with T&P required for the work etc. complete in all respect as directed by the E. I. C.(A/R-2006, P-93, i-1)

Painting Two Coat with Plastic Emulsion Paint of approved shede on new wall surface including cost of Paint conveyance as per the direction of Engineer in Charge.

Providing and Fixing Iron Window and Door Shutter with Angle iron frames and Grills including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fxing with C.C.(1:2:4) as per the direction of Engineer in Charge.

Supplying stacking conveying from stacks and spreading gravel or moorum and consolidation withh HRR including watering and cost,conveyance royality and taxes of all materials and labour charges in all respect as directed by the Engineer-in-charge.

Add Septic Tank (50 Users)

Recessed wiring to light/Fan/Exhaust fan/ Call bell point with 1.5 sq.mm FRLSH insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FRLSH insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Havels / V Guard ) (a) Group-A

(b) Group-B

(c) Group-C

insulated copper conductor of ISI marked Make- Make- Finolex/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type(( falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side) falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for Office.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required )

S/F of 15A power plug on M.S Board

Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved,

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Polycab/ HAVELLS/RR KEBLE/KEI) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)

2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)

2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)

4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(LFDB TO LBDB/power unit/point) (4X6+2X2.5)

4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4)

1 x 1.5 sq. mm (for inverter wiring)

Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials

Supplying,fixing of Blanking plate(modular type)( falme retradant type)) in existing switch box(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision), complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

LIGHT & FAN FITTING FIXTURE Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator)

Supplying and fixing of Energy efficient surface/Recessed mounted square shape 18 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : (Make: wipro LD80-171-60-XX-SM or similar model of LT/Trilux /Philips/Panasonic or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --or similar model of LT/Trilux /Philips/Panasonic or equievalantreputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years .

Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of powder coated CRCA housing having Perforated Center panel of 600 X 600 mm size with sytem power consumption of 36W and system lumens output not less than 3600 lumens @ 210 mA , 50K burning hrs @L70B50 with non yellowing Highly efficient molded PC diffusers for better light transmission and pure effect,with High luminous flux LEDs for better light output,CRI not less than 80 (SDCM5 & R90) , CCT of 4000K/5700K/6500K, THD less than 10%, Ripple 5% for anti-flicker , Inbuilt 4kV Surge Protection , over-voltage protection @320V cut-off with auto-restart , class B serviecability complete with electronic driver and all other accessories suitable for operation on 140V-270V AC , 50 Hz supply , UGR 19 , WELL V2.0 & LEED V4.0 , future provision of controls such as DALI / IA / POE etc. , BIS approved luminaire & BIS approved potted driver of same make . LM79,LM80,TTC & IES files from valid NABL accredited LAB as required as per direction of Engg.-in-Charge (Make: PHILIPS model no: RC480B LED30S/865 W60L60 PSU WH or similar of LT / XAL / Zumtobel make or equivalant make)

Supply & fixing of 60w LED light having die cast aluminium housing with epoxy powder coating and having specially profiled cooling fins at top for effective heat dissipation, separate driver and LED lamp cavity to ensure cooler operation of LED lamps and good electrical separation,heat resistant toughend clear glass cover with very high transmittance and high quality gasketing system,high power LEDs with specially designed lenses so as to provide batwing and sysmmetrical light distribution,driver with in bult protection against high voltage surge,open and short circuit. working voltage range 110V to 270V,light source: high efficacy LED,Led luminaire efficacy:=100(lumen/w),system power 60W,Correlated color temprature:5700K +-500K,Color rendering index:=70,Lumen maintenance:L70 at Burning hour of 50,000 hours,Operating temprature range:-10 to 50C,frequency 50Hz,Led driver efficacy:=90%.power factor:=0.95,surge protection : 10KV(external),THD:20%,IP rating:IP65. including G.I bracket as per direction Engineer-in-charge.(Make- Phillips/Bajaj/Wipro or equivalent)

S/F of 2.5 sqmm 3core cu cord for Street Light(finolex/v-gurd)

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.

BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years.

Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD )

2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.

Supplying and fixing 32Amps TPN 415 volts, MCB Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years

Supplying and fixing 25Amps DP 240 volts, MCB Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years

Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years

EARTHING INSTALLATION S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years(04 nos for main panel & equipement ,04 nos for DG SET)

S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.

Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.

CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 3.5core x 95 sq mm ( FOR DG )

3.5core x 70 sq mm ( FOR PANEL POWER)

LAYING OF CABLE Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.

Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 3.5 core x70 sq mm

3.5 core x95 sq mm

S/F of 1500VA inverter with 2nos 150Ah tubelar batteries with trolly etc. complete set. as per direction of engineer-in-charge.

PANELS S/F of 40x42x12 no 16/18 SWG sheet metal for main 200amp panel board having 200 amp MCCB 25 ΚΑ ας Incommer, 250A 4P Change Over- 1 No.200 amp electrolyte cu bus bar, 125 amp electrolyte cu bus bar and 125A, 25 KA FP MCCB-3No.40A DP MCB-3 No 63A FP MCB-5 No as Outgoing with ampere meter, volimeler, toggler switch,three nos led indicator and as per the direction of site engineer In charge legrand/Schneider/Equivalent)

EXTINGUISHER SYSTEM Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make:CS-FIRE/SUNMAX/CANEXE or equievalant )

Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.

A.C Machines AIR CONDITIONER: Supply of A.C machine with indoor and outdoor unit (Make- Hitachi/Carrier/Voltas or equivalent reputed make) 1.5 TR high wall split A.C

REFRIGRANT PIPING: Supply,installation of hard/soft copper refregrant piping,complete with fitting of bends and other nesessary material to complete the job. (1 TR to 3 TR high wall split A.C)

FRAME WORK : Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.

DRAIN PIPING : Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job. (25mm nom. Dia pipe,B1)

CONTROL CABLE: Supply,laying of control cable and other nesessary material to complete the job. (For 1 TR to3 TR high wall split A.C)

LIGHTENING CONDUCTOR SITC of High Pulse Voltage OPR 60/ESE-60 Early Streamer Emission (ESE) with radius of protection of 79 mtrs in level-1 accordance to NFC-17-102 standards. The Air termination shall be of the type that response dynamically to the appearance of a lighting conducrtor should deliver a unique gain time in efficiemncy anticipating the natural formation of an upward leader that propagates rapidily to capture the lighting stroke andconduct it towords the ground Make -STOR4MKING -2CT8899800R7100/paratonex/Ally well/ISG Global /Liva/Orbital)

Supply and Fixing of Air Teerminal; support mast of 5mtrs height for mounting of OPR 60/ESE30 with guy wire and base plate Make -/STORMKING-2CDT8899800R7100/Paratonex

Supply and installation Lighting striker Recorder (L.S.R) of Australian Make LSR it should be non electronics non resettable type having 6 digits display and enclosed in an IP67 enclkoser with minimum sensitivity of 1000A and maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1:1989. it should be non electronics type and does not require external power supply for working model LSR. Make -STORMKING-2CDT8899800R7100/Paratonex

S/F chemical Earthing with 2.4mtrs copper bonded rod and 50KG Chemical compound including supply and installation of Earthing chamber work and Hingcover as per I.E Rules (CPRI certified for S.C current ).

S/F of clamp for fixing of copper bonded rod in earthing

Suply of down conductor 70 sqmm single core insulated flexible copper cable with necessary accessories etc.

UPVC pipe 40 mm dia and other all acessories

50 KVA DG WITH AMF PANEL Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 50 KVA with suitable AMF panel ( Make -Kirloskar / Jakson / sterling) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete without AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms etc as per following specifications mentioned below. 1. ALTERNATOR: The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. (make : Kirloskar / Stamford /Tata or equievalant reputed make & model ISI marked as approved as per direction of Engg.-in-Charge). Warrentee period of panel must be 5 years & compelete test certificate must be submitted along with DG set including component list & smoke exhaust system drawing,certified ISO 8528 2. ENGINE: Diesel Engine make : Kirloskar / Cummins/Tata or equievalant make & model ISI marked as approved . Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 50 KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size and length with insulation or clading. 02. Diesel tank suitable for 8 to 10 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards 3. BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required. 4. FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. *It also includes 2 nos GI pipe earthing for body earth and 2 nos copper plate earthing for neutral earth. Control cable of 15mtr 2.5sqmm 6core , Civil foundation PCC work (1:2:4) of size 3650 X 1800 X 245 cubic mm. (The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work) 5. AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 50KVA DG Set complete with Battery Charger & leads as required.

AUDIO SYSTEM Supply & Installation of CONTROL 25-1 wall mount speaker Make- JBL or eq.

Supply & installation SSA-10000 watt Amplifier Make- AHUJA or eq.

Supply & installation Sound Master AIR 8U MIXER

Supply & installation JBL IRX 1155 Subwoofer

Supply & installation of Studio Master XR 100 4H wireless microphone.

Supply & Fixing of Podium Set (Make- AHUJA/Yamaha/Bose or eq.)

Supply & fixing of 1 sqmm Speaker cable with ISI marked PVC pipe (Make- MICROTECK or eq.)

Supply & Fixing of Speaker Cable (Make- Falcon or eq.)

Installation charges with all accessories

Supply & Fixing of 24 U RACK with all accessories (Make- VALRACK/NETRACK or eq.)