Municipal Bodies Tender

S/F of 3 mtr long Single arm(S-type) Decorative Poles for landscape Lighting made out of combo type Hot Dip Galvanized Pipes as per the IS: 1161: 1998. Bottom-1000mm X 114mm X 4mm, Top- 2000mm X 60mm X 4mm . With suitable base plate size and cast aluminium Ornamental spigots at the bottom, middle and top with PYU based etch primer & matt finish on the surface to make it absolutely rust & corrosion proof, as well as giving the pole a fantastic athletic look. Provision of eleptical service window and to mount one nos MCB with ERP pole junction box including clamps, locking arrangement and for providing connection to incomer cable and out going wire, Suitable bus bar arrangement to loop 2 to 3 cables of size up to 6 sqmm,6A MCB and bi-metallic connector to be provided in each junction box for supply to LED Luminaires. Supply of suitable foundation bolts is included in the cost of pole, as per direction of the engineer in-Charge (MAKE of poles:-Crompton/Philips/Bajaj/ Havells/Jaquar/Sleex/PPE/Surya)

S/F of 45 Watt Tear drop (Hanging type) LED decorative garden Light . Frequency-50Hz Voltage/Current: 240V-0.150-0.180A Wattage 240V-45 Watt Material of construction: Die cast Aluminium Housing, polycarbonate Diffuser powder coated, Ingress Protection: IP65, LED: 3000- 4000 deg. K +/-500K, Driver Efficiency: ≥85%, Surge protection: 4kV, Power factor: ≥90%, THD: ≤10%, Operating input voltage range: 150 - 270V, Power consumption: 45 Watt . Fixture should be suitable for 3 Mtr Decorative pole entry with fixing bolts,etc.. (Make- Crompton/ Philips/Bajaj/Havells/Jaquar)

S/F of 10Watt WW SMD LED chip bollard light with electronics driver etc., IP65 Protection, 1meter height, strictly as per direction of the Engineer-In-Charge. (Make-Bajaj/Crompton/ Wipro/ Havells/Philips/Jaquar /Orient)